Hidravlična škarjasta dvižna miza, dvižna miza z zunanjim hidravličnim agregatom

WEIDMANN E5/13-1

Stanje: rabljeno, Leto izdelave: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will be in operation until the end of September 2023 and can be inspected at any time. Technical data - Max. capacity: 120 pallets/hour (at 10 wraps) - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame made of steel - Rotary ring with dispenser for pre-stretch film - Motorized pre-stretch system - Cutting and sealing system Scope of delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016 Chsdpfx Asl Uyfksiqsc

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot No operator panel + connection cables Cedpfx Ajgu U Itjiqshc Used, untested robot. No teach pendant. Not tested.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Cedpfsvllxdjx Aiqshc Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) Codpfx Aogwbbqoiqehc No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Prasa o wymiarach roboczych 4,5 m x 1,9 m Codpfx Aijlzi S Neqshc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R14101358 (Roboter) / E14130752 (Steuerschrank), skupna masa: 1.270 kg, nosilnost: 250 kg, doseg roke: 2.655 mm, proizvajalec krmilnikov: FANUC, model krmilnika: R-30iB, vhodna napetost: 400 V, FANUC industrial robot R-2000iB 250F, Year of manufacture: 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Payload: 250 kg. Dimensions: Length 200 cm, Width 110 cm, Height 185 cm. Chodpjtk N E Tefx Aiqoc Control cabinet: FANUC R-30iB. Complete with robot arm, connection cables, teach pendant, and controller. (For further details, see nameplates). IPendant A05B-2255-C101#EGN We also offer accessories such as pedestals, spot welding guns, rotary tables, and much more. We are happy to demonstrate the robot for you. Packaging and loading included.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, HD Washing Table – HD Brush Washing Table The washing table features an adjustable 60 bar high-pressure pump, allowing for cleaning operations within an enclosed workspace. Cleaning is achieved using an aqueous degreaser (10 kg included in delivery) at approximately 45°C. - Viewing window with integrated lighting - Media filtration via cartridge filter Chodpfx Aehl If Noiqjc - Convenient operation with foot switch - Includes rotary table Technical Data: - Working surface: 1,200 x 700 mm - Usable height: 400 mm - Load capacity: 50 kg - Operating pressure: adjustable up to max. 60 bar - Pump capacity: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank volume: 170 l - Heating power: 4,000 W - Total power consumption: 8.0 kW - Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz - Machine weight: approx. 180 kg - Overall dimensions with lid open: 1,480 x 991 x 2,080 mm

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Plate Heat Exchanger APV H17 7.41 L 4.8 m³ 800 kW APV H17 MGJ Plate Heat Exchanger /ct2227/ Manufacturer: APV Model: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer area: 4.08 m² Nominal power: 800 kW Width: 340 mm Height: 1050 mm Connection height: 137 mm Depth: 60 cm Pipe connection: DN50, EN 1092 Capacity: Primary: 7.41 liters Secondary: 6.86 liters Max. pressure: 10 bar Test pressure: 15.53 bar Max. temperature: 110 °C Pipe connections made of stainless steel. Csdpfx Aiewx Hz Ssqehc

Stanje: rabljeno, Leto izdelave: 1968, Roller diameter: 500 mm Throat depth: 1050 / 485 mm Workpiece height: 300 mm Saw band length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table size: 750 x 800 mm Table tilt: 15 degrees Total power requirement: 4.0 kW Machine weight: approx. 1750 kg Space requirement: approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angles - Mitre adjustment via lockable indexing every 15° - Saw band adjustable for optimal cutting angle - Hydraulic vice on both sides - Electric band break monitoring - Smooth-running saw carriage via preloaded ball linear guides - Additional table 450 x 450 mm - Machine lamp Codpfx Aeiqp Erjiqjhc

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, AT SERIJA Vstopni model vlaknastega laserskega stroja za razrez pločevine in cevi En stroj, dve funkciji. Serija AT reže tako kovinske pločevine kot tudi kovinske cevi. Laserski stroji za razrez pločevin in cevi, serija A-T Izboljšana funkcionalnost Laserski stroji za rezanje pločevin in cevi, serija A-T Baza podatkov za visoko hitro rezanje Učinkovitost hitrega rezanja z zrakom se poveča za 37 %, ko režete ogljikovo jeklo. Laserski stroji za rezanje pločevin in cevi, serija A-T Aktivna funkcija preprečevanja trčenj Glave vlaknastih laserjev zaznavajo izbočene ovire in s tem učinkovito zmanjšujejo stopnjo poškodb ter znižujejo stroške vzdrževanja laserskega stroja. Laserski stroji za rezanje pločevin in cevi, serija A-T Bodor Lightning Izjemno hiter preboj materiala v povezavi s sistemom BodorGenius omogoča popolno izvedbo prebijanja med pomikom glave laserja po Z-osi. Laserski stroji za razrez pločevin in cevi, serija A-T Brez vibracij pri rezanju tankih pločevin Postopek rezanja poteka nemoteno tudi na robovih tankih pločevin ter zagotavlja rez brez valov ali tresljajev. Laserski stroji za rezanje pločevin in cevi, serija A-T Rezanje kotnika in U-profila Rezanje kotnikov in U-profilov je standardna funkcija, ki ne potrebuje dodatne namestitve. Laserski stroji za rezanje pločevin in cevi, serija A-T Iskanje robov na štirih straneh za višjo natančnost Optimizirana metoda in algoritem za iskanje robov zagotavljata večjo natančnost reza ter boljšo stabilnost stroja. Mehanska konfiguracija Laserski stroji za rezanje pločevin in cevi, serija A-T Raztegljivi aluminijasti prečni nosilec Postopek raztezanja pri ultra visokem pritisku in lahko zasnovana konstrukcija; togost povečana za 60 %; masa znižana za 20 %; hitrost pomika stroja povečana za 50 %. Laserski stroji za rezanje pločevin in cevi, serija A-T Modularna delovna miza Modularna miza s prečniki skrajša čas demontaže ter poveča priročnost in togost. Laserski stroji za rezanje pločevin in cevi, serija A-T Pnevmatski vpenjalni sistem Vpenjanje materiala je enostavno in hitro, vpenjanje v 3 sekundah ter visoka ponovljivost natančnosti. Programsko Orodje BODORTHINKER BodorThinker je visokotehnološki inteligentni krmilni sistem za CNC laserske stroje, ki odlikuje zanesljiva stabilnost, enostavna namestitev in nastavitev, varno delovanje, široka funkcionalnost ter odlične zmogljivosti. Z BodorThinker je mogoče ustvariti modularne, prilagojene, avtomatizirane in informacijsko podprte rešitve laserskega razreza. Oblikovanje Csdpehtyutofx Aiqshc Nagrajen industrijski dizajn “Oskar za dizajn”: dobitnik dveh od treh največjih svetovnih nagrad za industrijski dizajn. Daljinsko upravljanje Ergonomska zasnova v obliki manga in priročno magnetno pritrdilo omogočata enostavno enoročeno upravljanje.