Finke nakup rabljenega (5)

Stanje: rabljeno, Surface Grinder, Grinding Machine, Horizontal Surface Grinder, Flat Surface Grinder, Magnetic Surface Grinder -Manufacturer: Finke, Horizontal Surface Grinder with Magnetic Chuck -Magnetic Chuck: 550 x 200 mm -Traverse Paths: x 500 mm / y 260 mm / z 260 mm -Drive Power: 1.5 kW Dsdpeh Ic Ntefx Ab Hokn -Grinding Wheel: max. Ø 200 mm -Dust Extraction Unit -Transport Dimensions: 1950/1300/H1590 mm -Total Weight: 1108 kg

Stanje: novo, Load capacity 500 kg. Number of suction cups: 6 units Diameter of suction cups: 215 mm Suction capacity: 8.0 m³/h Crane eye diameter: 80.0 mm Voltage: 400 V Total power requirement: 0.18 kW Machine weight: approx. 120 kg Space requirements: approx. 2400 x 1100 x 584 mm Equipment: - For horizontal transport of smooth, dry, and airtight panels - Robust steel load-bearing frame - Painted in RAL 2000, featuring a low dead weight - Galvanized longitudinal beam, length 2,400 mm - 3x galvanized crossbeams, each 1,000 mm long - 6x spring-loaded, articulated, and adjustable suction cup holders - 6x suction pads Ø 215 mm - Low-maintenance, high-quality, dry-running rotary vane vacuum pump - With a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Telescopic operating handle, extendable up to 1,000 mm from beam center - Sturdy sheet metal holder for your crane control - "Suction / Release" operation via manual slide valve - Control and safety device for vacuum lifter * Robust control cabinet * Contactor control circuit for the vacuum pump * Safety warning system with acoustic sounder * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Two-step operation for load release - Fine dust filter for vacuum pump protection - Documentation Dedpfjxak Ddox Ab Hskn * Special accessories included: - 6x ball valves for isolating individual suction cups * Enables handling of smaller formats without the need to move suction cups or crossbeams - Small spiral connection cable * Extension length up to 3,500 mm, designed as * Extension cable with CEE plug and coupling * Routed alongside the load chain to the lifting device

Stanje: novo, Load capacity 250 kg Number of suction pads 6 Diameter of suction pads 215 mm Vacuum lifter VH 6-250 for horizontal transport of smooth, dry, and airtight panels. Robust steel load-bearing frame painted in RAL 2000, with low self-weight. Consisting of: - 1x Galvanized longitudinal beam with a length of 2,400 mm - 3x Galvanized cross beams, each with a length of 1,000 mm - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, seals can be replaced independently of their metal carrier, economically and without tools - 6x Ball valves to deactivate individual suction cups, enabling the handling of smaller formats without needing to move suction cups or beams - 1x Spiral connection cable, small coil: * Extendable length up to 3,500 mm, configured as an extension cable with CEE plug and coupling * Routed parallel to the load chain to the lifting unit - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). With isolating transformer integrated in the control unit (required when the vacuum lifter is powered via the crane trolley/bridge and the crane does not have a neutral wire) - Extendable operating handle up to 1,000 mm from beam center Sturdy sheet metal pocket for your crane controls included at no extra charge Dedsnlb Rwepfx Ab Hokn - Operation "Suction / Release" via manual slide valve: The wear-free and very robust manual slide valve ensures safe suction and release after pressing the unlock button (Double release according to EN 13155) - Control and safety system for vacuum lifter: * Durable control box * Contactor circuit for the vacuum pump * Safety alarm with acoustic signal * Vacuum gauge with danger zone indicator * Large vacuum reservoir tank with safety check valve * Double actuation for load release - Fine dust filter to protect the vacuum pump - Detailed and easy-to-understand documentation Warranty on material and manufacturing defects for one year (single-shift operation, excluding wear parts). Initial inspection UVV 18, VBG 9a, with CE Declaration of Conformity, in accordance with EN 13155 - Packaging suitable for truck transport.

Stanje: novo, Lifting capacity 1000 kg Number of suction pads: 8 Diameter of suction pads: 280 mm Vacuum Lifter VH 8-1000 For horizontal transport of smooth, dry, and airtight panels. Sturdy support structure made of steel, painted in RAL 2000, with low dead weight. Includes: - 1x Galvanized longitudinal beam, length 2,400 mm - 4x Galvanized cross beams, each 1,000 mm long - 8x Spring-loaded, articulated and adjustable suction pad holders - 8x Suction pads Ø 280 mm; in case of wear, the seal can be replaced separately from its metal carrier, cost-effectively and without tools - 8x Ball valves to deactivate individual suction pads, allowing smaller formats to be lifted without moving the pads or traverses - 1x Spiral connection cable, small spiral: * With extension length of 3,500 mm, supplied as extension cable with CEE plug and coupling * Routed alongside the load chain to the lifting device - Low-maintenance, high-quality oil-lubricated rotary vane vacuum pump with a suction capacity of 21 m³/h and an ultimate vacuum of 98% (20 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Operator handle extendable up to 1,000 mm from center of beam Sturdy sheet metal holder for your crane controls included at no extra charge - Operation “Suction / Release” via hand sliding valve: The wear-free and very robust hand sliding valve ensures safe suction and release after operating the release button (double release as per EN 13155) - Control and safety system for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic signal * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Comprehensive and easy-to-understand documentation 12-month warranty against material and manufacturing defects for single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE declaration of conformity- According to EN 13155 Dkjdpfjnlb Rzsx Ab Hjn - Packaging suitable for truck transport.

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Dodpfx Absq Sc Auo Hekn Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.