Emco Mill 155 nakup rabljenega (144)

Leto izdelave: 2007, obratovalne ure: 8.500 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical Machining Center Emco FAMUP MCX 750-1200 with IKZ 40 bar Year of manufacture: 2007 Control: Fanuc 21i Operating hours: 8,500 h Chip Blaster high-pressure system - Max. spindle speed 8,000 rpm - Tool magazine with 24 stations (ISO 40) - Tool holder ISO 40 – 24 ISO 40 pull studs - Standard paintwork: red – grey – black - Spindle prepared for high-pressure cooling (connection A) - Tapping without floating holder - Central lubrication system - Chip removal from the enclosure via flushing device - Rinse gun for cleaning work area, clamping devices, parts - Coolant unit with 3 adjustable nozzles - Coolant tank 500 l - Spindle air blast device for cleaning the taper during tool change - Work area illumination via 24 V halogen lamp - Two-color warning light TECHNICAL DATA MCX 750 X-axis travel: 750 mm Y-axis travel: 500 mm WORKING RANGE Z-axis travel: 640 mm Clamping surface: 900 x 520 mm T-slots: number, width, spacing: 5x18x100 mm Max. table load: 400 kg TABLE Distance table top – floor: 925 mm Speed range: 50 – 8,000 rpm Spindle motor power: 13/9 kW Tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive: belt drive Rapid traverse X,Y,Z: 24 m/min Feed rate X,Y,Z: 20 m/min AXIS DATA Axis acceleration (X,Y,Z): 0.25 G Unidirectional positioning accuracy over entire XYZ range: ±8 µm Unidirectional repeatability X, Y, Z: ±8 µm PRECISION Reversal play: 5 µm* Number of tool stations: 24 Tool selection: random Max. tool diameter with (without) adjacent tools: Ø 75 (150) mm Max. tool length: 250 mm Max. tool weight: 6 kg TOOL CHANGE Tool change time (tool/tool): 1.5 s Connected load: 20 kVA Dimensions LxWxH: 2,650 x 2,400 x 3,050 mm Podpfxjh Akhke Adyogg Weight: 5.5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, proizvajalec krmilnikov: SIEMENS, Ta 3-osni vertikalni stružni stroj EMCO VT 400 je bil izdelan leta 2014. Ponuja robustno konstrukcijo in natančne stružne funkcije, idealen za različne industrijske aplikacije. Razmislite o priložnosti za nakup vertikalnega stružnega stroja EMCO VT 400. Za več informacij nas kontaktirajte. Dodatna oprema • Število nosilcev orodij: 12 • Nosilci orodij po DIN69880 VDI 40 • Število gnanih postaj: 12 Prednosti stroja Pgodpfxsx D Irao Adyog Tehnične prednosti stroja • Največji navor: 40 Nm • Območje vrtljajev: 0–4000 min⁻¹ • Največja pogonska moč: 8,5 kW • Obratovalni čas pri največji moči: 25%.

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Pgsdpfx Aow Tg Adedyog Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F9B192402, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 350 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 5.000 obr/min, hod vretena: 80 mm, hitro pomikanje X-os: 5 m/min, hitri pomik os Y: 5 m/min, hitri pomik na osi Z: 5 m/min, skupna višina: 1.990 mm, skupna širina: 2.030 mm, skupna dolžina: 1.980 mm, širina mize: 270 mm, dolžina mize: 400 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 10 obr/min, obremenitev mize: 450 kg, skupna masa: 2.270 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 450 kg, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, EMCOMAT FB-450 MC with Sinumerik 828D Path Control with “Manual Machine” Universal tool milling and drilling machine equipped with Sinumerik 828D path control and hydraulic tool clamping Working area X450/Y350/Z400mm Drive power 7/10 kW Speed range from 10–5000 rpm Feed rate from 10–5000 mm/min Rapid traverse up to 5000 mm/min Machinist’s precision as per DIN 8615 Tool holder: DIN 69871 SK40 Includes: • Linear guides • Ball screw spindles • Vertical milling head, swivels +/-90°, with 80mm quill travel • Swivel-out device for vertical head • Hydraulic tool clamping • Coolant system • LED machine lamp • Fixed angle table 800x400mm • Work area guard incl. chip tray • Automatic central lubrication • Operating tools • Documentation • Machining with open door (Operating Mode 3) • Controlled and manual operation modes combined in one machine • Sinumerik 828D path control incl. control package for 3 axes with ball screws and servo motors, Process cycles with graphical user support: Pgjdpfjxapdcex Adyeg Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on bolt circles and linear hole patterns, rectangular and circular pockets, slot milling cycle, facing cycles, etc., USB interface

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Uporaba Kovina Tip izdelka Stružnice Način delovanja Ročni Serijska številka 8303059 Največje število vrtljajev vretena Pedpfsyalhxox Adyogg 2200 vrt./min. Znamka Emco Zahtevana moč (kW) 1,4 Država in regija proizvodnje Avstrija Vir energije Električni Tip upravljanja Konvencionalno Teža stroja (kg) 300 Model/Tip Maximat Super 11 Leto izdelave 1983

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Z nakladalcem za kratke palice EMCO SL 1200 EMCO ponuja popolno rešitev za samodejno pomikanje in nalaganje palic do največje dolžine 1200 mm. Popolnoma delujoč, v zelo dobrem stanju. Letnik izdelave: 2019. Tehnični podatki SL1200 Dolžina palice: 150 - 1200 mm Premer palice: 8 - 90 mm Pomik: 1350 mm Maks. hitrost pomika: 60 m/min Maks. hitrost povratka: 60 m/min Čas pomika palice: ~ 3 s Čas menjave palice: ~ 10 s Zaloga materiala: 9 palic Ø 65 ali 97 palic Ø 6 Dolžina: 1700 mm Širina: 1100 mm Pgjdoyabuzepfx Adyeg Višina: 1200 - 1500 mm Teža: cca 450 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK, skupna višina: 2.450 mm, širina mize: 325 mm, dolžina mize: 850 mm, obremenitev mize: 150 kg, največja hitrost vretena: 5.000 obr/min, moč vretenovega motorja: 9.000 W, število osi: 3, This Emco VMC 300 vertical machining center was manufactured in Austria in 2003. It is equipped with a SIEMENS SINUMERIK control system. Additional Equipment • Maximum torque: 100 Nm (at 5000 rpm), 78 Nm (optional at 8000 rpm) • Tool change time: T1: 5.8 s, T2: 3.9 s, T3: 3.9 s // Chip-to-chip time (VDI 2852): T1: 8.9 s, T2: 7.0 s, T3: 7.0 s • Coolant system: tank capacity 100 liters / flow rate 10 l/min / maximum delivery pressure 3.7 bar / 4 external nozzles • Lubrication system: automatic central lubrication for guideways and ball screw / grease lubrication for main spindle bearings • Pneumatic connection / system pressure 5 - 10 bar • Minimum air flow 750 l/min / average air consumption 180 l/min • Electrical connection: mains connection 3/PE ~ 400 V 50/60 Hz / connected load 15 kVA / main fuse 35 A (slow-blow) Pgedpfoya Hg Nsx Adysg Machine Advantages Technical Machine Advantages • Qualitative advantages of the machine: • Reliable 12-position tool changer system • Integrated automatic lubrication system for guideways and ball screws Technical Specification Taper size: SK 40 Dimensions Machine depth: 2300 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 4.902 h, potovalna razdalja osi X: 210 mm, pomik osi Y: 40 mm, pomik po osi Z: 610 mm, skupna višina: 2.500 mm, skupna masa: 6.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sumerik 810 D, število osi: 3, This 3-axis EMCO Turn 365 TCMY was manufactured in 2003 and features a 12-position tool turret, VDI 30 tool holders, and driven tools with a speed range of up to 4,000 rpm. It is equipped with a power chuck, live center, collet chuck device, and additional tool holders. This machine is ideal for precision turning applications, offering robust capabilities with a spindle bore of 65 mm and a Z-axis travel of 610 mm. Contact us for further information regarding this machine. Additional Equipment: • Oil cooler • Parts catcher Machine Advantages: Qualitative Advantages: • Machine is in very good condition Technical Advantages: • Swing diameter over flat slide: 360 mm • Workpiece size with tailstock: 200 × 520 mm diameter • Tool carrier: 12-position turret • Driven tool speed range: 0-4000 rpm Podsx D H Adopfx Adyogg • Operating voltage: 400 V • Frequency: 50-60 Hz • Rated current: 29 A Additional Information: Available tooling and accessories: - Power chuck: KITAGAWA BB08 - Live center by RÖHM - Collet chuck device with 11 collets - 8 driven tool holders - Various left- and right-hand turning tool holders - Various holders for boring bars and drills - Various turning tool holders for indexable inserts Included accessories: - 1x Kitagawa power chuck - 1x live center - 8x driven tool holders - 1x collet chuck with 11 collets - 5x boring bar holders - 7x turning tool holders, left and right Dimensions: Machine depth: 4,000 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stružnica Emco Super 11 CD. 380V, 3-stopenjski in 2-stopenjski motor, gladko delovanje. Pogon vretena s menjalnikom, zobniki delujejo v oljni kopeli. 8 hitrosti vretena nastavljivih od 55 do 2200 obr/min. Norton menjalnik za enostavno rezanje navojev. Avtomatski vzdolžni in prečni pomik. Konjiček MK2. Črpalka za hlajenje nameščena na zadnji strani osnovne omarice. Zaščitni pokrov vpenjala. Hitromenjalni nosilec orodja. Razdalja med konicami: 650 mm. Višina konic: 140 mm. Premer vretena: 35 mm. Pedpfx Adjyalrkeyegg

Stanje: dober (rabljeno), Leto izdelave: 1995, Description Pgedsvt Amujpfx Adyog Control: Sinumerik 810M Spindle speed: 5,000 rpm Turret head: 12-position Table clamping area: Length 850 mm, Width 325 mm Very good condition, regularly maintained. Operating manual in German Number of axes: 3 (X, Y, Z) Travel X: 420 mm, Y: 330 mm, Z: 240 mm Control: Sinumerik 810M Max. spindle speed: 5,000 rpm Automatic tool changer for 12 tools Tool holder: SK40 Coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, skupna višina: 1.880 mm, skupna masa: 3.900 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 810D with ShopTurn 6.4, največja dolžina izdelka: 6.500 mm, This EMCO EmcoTurn E65 was manufactured in 2007. It features a swing-over bed of 600 mm, a maximum turning diameter of 310 mm, and a bar capacity of 65 mm. Equipped with a Siemens Sinumerik 810D control unit, it offers high precision and efficiency. If you are looking for a high-quality lathe, you should consider the EMCO EmcoTurn E65, which we are offering for sale. Please contact us for further details about this machine. • Spindle motor: AC motor, 15 kW (100% duty cycle) / 18 kW (60% duty cycle) • Spindle speed range: Infinitely variable, 60 – 4200 rpm • Axis travel: X 210 mm / Z 610 mm • Rapid traverse (X / Z): 24 / 24 m/min • Swing over bed: 600 mm • Max. turning diameter: 310 mm • Max. workpiece length: 520 mm • Max. bar diameter: 65 mm • Chuck: 3-jaw chuck "Kitagawa" BB208 • Turret: 12 stations, all driven tools • Speed of driven tools: up to 5000 rpm • Coolant supply through turret: 25 bar • Tool interface: VDI 30 (DIN 69880) • Bar feeder: Compact Load LM 1200 (max. bar length 1200 mm) • Chip conveyor & pneumatic parts catcher • Connected load: 20 kVA Optionally: Tool holders, driven tool holders, and various clamping jaws for sale. Dimensions Pjdpfjyabuhsx Adysgg Machine depth 1941 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Specifications: >> Year of manufacture: approx. 2000, Machine no. D3F H1 010 >> Centre height: 170 mm >> Swing diameter over bed: 340 mm Pjdpfxewvuf Ts Adyegg >> Swing diameter over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock: Morse taper 3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Space requirements: approx. length 1.600 x depth 0.9 x height 1.3 meters >> Weight: approx. 730 kg Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Functions: Metric/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 positions), taper calculation, radius/diameter, rapid zeroing, count direction switching >> 1 piece 3-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: Offered is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in excellent condition. The machine is naturally fully functional. The bedways are in very good condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Center height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Tailstock quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint/installation dimensions approx.: length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis position display >> 1 piece 3-jaw chuck with 1 set of jaws >> Toolholder with 3 pockets >> Chip guard >> Coolant system Psdpfswag Stjx Adyogg >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, used very little. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in excellent condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 2004, potovalna razdalja osi X: 450 mm, pomik osi Y: 300 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 100 mm, Orodjarska rezkalna stroj V/H Proizvajalec: Emco Tip: FB-4 Leto izdelave: 2004 Krmiljenje: prikazovalnik Heidenhain ND-760 Tehnični parametri: ----- • Pomiki X-Y-Z: 450 x 300 x 350 mm • Vpenjalna površina: 800 x 400 mm • Vpenjanje orodja: SK-40 • Hodi pinole: 100 mm • Rezkalna glava vrtljiva ± 90° • Vreteno: 50 – 2.500 obr/min • Izbiranje hitrosti: 18 stopenj • Električno centralno mazanje • Strojna luč • Hladilni sistem • Kabina proti brizganju (zložljiva) • Teža: 1.550 kg • Dimenzije DxŠxV v mm: 1.485 x 1.500 x 1.700 mm Dodatna oprema: ----- • 4x nastavljive noge za stroj • Navodila za uporabo • Vpenjalni ključ • Nasprotni ležaj za vodoravno obdelavo • Set gredi za vodoravno obdelavo • Zaščitni pokrov mize (trenutno odstranjen) Pedpfx Adjx Tzk Roysgg Na voljo sta dve identični stroji, obe servisirani in delno prenovljeni v Q4-2025.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 12.125 h, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840D, število osi: 6, This 6-axis EMCO Hyperturn 665MC Plus turning-milling center was manufactured in 2008. It features a multi-axis CNC system with a Y-axis and B-axis, enabling complete machining of turning and milling components. Equipped with integrated spindle motors on both the main and counter spindles, it offers a spindle speed of up to 5,000 rpm for the main spindle and 7,000 rpm for the counter spindle. The machine includes a 24-position tool magazine and is controlled via a SINUMERIK 840D system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 665MC Plus, which we offer for sale. Please contact us for further information about this machine. Pgedpfx Asx D Hwnodysg Additional Equipment • Tool turret: 12-position radial VDI 30 tool turret with directional logic for up to 12 driven tool stations • B-PowerMill: Motorized milling spindle with a 24-pocket tool magazine, 210° swivel range • Optional tool package: Includes static and driven tool holders, collet holders, reduction sleeves, and actuating clamps • Hollow clamping cylinder with draw tube / part ejector and coolant flushing through the counter spindle / finished part catcher • Finished part collection device / coolant system integrated in the chip conveyor / high-pressure pump (14 bar) and fine filter • Flush pumps (3.7 bar) / electrical cabinet air conditioning / electrostatic oil mist separator • Hydraulic unit / machine lamp / foot switch interface / signal lamp • Documentation with electronic handwheel, PC keyboard, network readiness, tool monitoring, process window, cleaning pistol • Main spindle clamping system: Hainbuch BZI 80 pull-to-center Machine Advantages Technical Machine Benefits • Counter spindle: 22 kW / Counter spindle: 0–7,000 rpm • Main spindle: kk 6 (bar capacity 65 mm) / Counter spindle: kk 6 • Y-axis travel: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck, 210 mm • Approx. 40 Capto C4 tool holders for milling spindle • Loader lm 1200 • The machine does not have ShopTurn programming. It must be programmed with ISO code, with simple cycles available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Stanje: dober (rabljeno), Leto izdelave: 2006, Maszyna używana wyłącznie do tworzyw sztucznych. Szczegółowe dane techniczne znajdują się w załączonym dokumencie PDF. Części prezentowane ręcznie nie wchodzą w zakres dostawy. Podpfeu Ibihjx Adyjgg

Stanje: dober (rabljeno), Merilnik trdote Tip: M5U 300-030 Pgjdpfx Adjx U Dprsyeg Proizvajalec: emco Stanje: rabljeno, dobro, brez garancije

Stanje: zelo dobro (rabljeno), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis digital readout by EMCO Year of manufacture: 2007, CE compliant Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: ø 340 mm Swing diameter over cross slide: ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed carriage guideway length: 380 mm Tool cross-section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (compound rest) swiveling range: 60 / 120° Main spindle: Spindle mount: DIN 55029 (Camlock) Spindle bore: ø 50 mm Internal taper: DIN 7178 1:22 Spindle diameter at front bearing: ø 70 mm Max chuck diameter: ø 200 mm Max face plate diameter: ø 200 mm Spindle speeds: 40 - 3000 rpm Infinitely variable speed control Mechanical speed ranges: 4 Main drive: Rated power at 40% duty cycle: 5.3 kW Max. nominal torque at spindle: 640 Nm Feeds: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (standard): 0.4 – 7.0 mm Tailstock: Quill diameter: ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weight (between centres): 50 kg, supported by tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe designed for all areas of mechanical engineering and training applications. Equipment: - EMCO 3-axis digital display with color screen - Potentiometer, emergency stop button, digital speed readout at the control panel next to the DRO - 3-jaw chuck - MULTIFIX quick-change toolpost size B - Electrically interlocked chuck guard - Quick collet clamping device - MICROJET coolant spray system - Chip guard/rear splash guard - Machine lamp - Machine feet - Bed stop Condition: Very good, from training workshop Pedsxx S R Aspfx Adysgg "Due to its quality and price, this machine is not suitable for private individuals." Available from March 2026

Stanje: dober (rabljeno), EMCO Tool Milling Machine Type FB 3 (not a DECKEL FP 1) with 3-axis digital readout HEIDENHAIN Year of construction: 2007/2008 3 units available! Travel distances X/Y/Z: 300 x 200 x 350 mm Spindle taper vertical/horizontal: SK 30 DIN 2080 Tool clamping: manual Quill travel: 45 mm Swiveling vertical milling head: +/- 90 degrees Spindle power: 1.1/1.4 kW (60/100% duty cycle) Speed vertical/horizontal: 80 – 2,200 rpm Gear stages: 8 Fixed angle table: 600 x 200 mm Podoxx R Itepfx Adyegg Infinitely variable feed: X/Y axis: 0-550 mm/min Rapid traverse X/Y axis: 1200 mm/min Feed Z axis: manual Machine dimensions (W x D x H): 1150 x 1410 x 1550 mm Weight: approx. 500 kg Standard Equipment: - 3-axis HEIDENHAIN digital readout - Coolant unit integrated in the machine base - Angle table, manual central lubrication - Swiveling device for vertical spindle - Chip tray - Splash guard - CE compliant Special Features: - HEIDENHAIN precision digital readout - Stepless feed control/rapid traverse in longitudinal and cross directions - Operator’s panel with clear keypad for easy operation - Safety handwheels on all 3 axes - Adjustable precision tapered roller bearings - Adjustable, double-acting hardened gib strips - Removable coolant tank Additional Equipment: - SEMER make micro-spray system connected to coolant switch/standard coolant pump Application Area: - Ideal for instrument and prototype construction; training; small workshops; professional DIYers The machines come from a training facility. Condition: good to very good Available from March 2026, possibly earlier by arrangement.

Stanje: rabljeno, Leto izdelave: 2003, Krmiljenje 840D-PCU 50 V1 Kosov na zalogi: 3 Pjdpfsqn A Rrox Adyegg Hladilna tekočina: da Transporter za ostružke: da, kW Nazivni tok generatorja: 110 A Priključna moč: 56 kW

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Swing diameter over bed: 340 mm Swing diameter over support: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm / 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill: MT3 Spindle torque: 350 Nm Maximum workpiece weight – between centers: 50 kg Total connected load: 3.0 kVA Machine weight approx.: 0.79 t Pgsdpfx Adeu Ixw Aoyeg Machine dimensions approx. LxWxH: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 (external clamping) Longitudinal slide X-axis travel: 600 mm; longitudinal feed 0.045 - 0.787 mm in 20 steps; metric thread Cross slide Y-axis travel: 220 mm; feed 0.023 - 0.406 mm in 20 steps Top slide swivels 60° right and 120° left Thread cutting Machine lighting No coolant system (pre-installed) Accessories: 3 sets of turning jaws 3x Multifix toolholders 2x drill chucks 1x live center 3 machine feet

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Pgsdpfeu Ixwiex Adyog Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool In standard condition.

Leto izdelave: 1982, Stanje: rabljeno, Technical Details: Z-axis travel: 260 mm Maximum test force: 49 - 7355 N (test load) Test height: 260 mm Pgodpfju N Avxjx Adysg Workpiece weight: max. 160 kg Throat depth: 200 mm Interface: RS 232 Input voltage: 230V / 50Hz Total power requirement: 200 VA Machine weight approx.: 250 kg (without base cabinet) Machine dimensions approx. (LxWxH): 0.7 x 0.6 x 1.8 m (with base cabinet) The hardness testing machine, equipped for depth measurement operation, is offered for sale including a base cabinet (Emco model for hardness testers). The device is suitable for the following test methods (manufacturer specifications): Metals: Brinell, Vickers, Rockwell Plastic testing according to DIN 53 456 Other materials: testing possible only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, strain gauge and DC motor, for M4R-075 = 49 to 7355 N Test table Ø 90 mm, height adjustable via hand wheel Test table mount in accordance with DIN 51 225 = Ø 25 mm Operation and programming via control panel with graphic-capable, illuminated LC display Accessories: Additional test tables/plates as shown in the photos Incl.

Stanje: rabljeno, Leto izdelave: 2008, Technical Details: Swing diameter over bed: 600 mm Pgjdpfx Ajvvtpxjdyog Swing diameter over cross slide: 540 mm Turning length: 550 mm Z-axis travel: 800 mm X-axis travel: 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1000 rpm Tool turret – number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions approx. LxWxH: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features a C-AXIS, E-axis, Y-axis, and W-axis Driven tools can be used at all turret stations Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooler With hinge belt chip conveyor Chip tray Compressed air gun Machine is offered WITHOUT chuck as shown!

Stanje: rabljeno, Leto izdelave: 1990, Technical details: X travel: 185 mm Y travel: 95 mm Z travel: 200 mm Control: emco tronic TM02 Spindle mount: SK 30 Speed range: 10 - 4000 rpm, stepless Feed rate stepless: 1 - 2000 mm/min Rapid traverse: approx. 3.0 m/min Tool turret - number of stations: 10 Interface: R 232 Table size: approx. 420 x 125 mm Total power requirement: 0.8 kW Machine dimensions (LxWxH): 2.1 x 0.9 x 2.0 m Control panel: EMCOTRONIC TM 02 Pjdovc Awropfx Adyogg Operating modes: Manual operation and/or automatic Coolant system (with supply to the milling spindle) Operation via control panel mounted on 3 swiveling wheels Pneumatic door guard