Elumatec Aks 134 nakup rabljenega (134)

Stanje: rabljeno, Leto izdelave: 1998, Stroj za vrtanje vratnih tečajev za obdelavo aluminijastih profilov s pnevmatskimi sponami za material ter mikro pršilnikom. Dolžina obdelave: maks. 2400 mm Širina profila krila: maks. 108 mm Pjdpsy Anhnofx Andogn Širina profila okvirja: maks. 200 mm Višina profila: 45–80 mm Hitrost vretena: 1900 vrt/min Teža: cca 500 kg

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Podpfxjw A Rv Is Andsgn Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 1423530534, Ponudba 26120 Pgsdpfx Ansy Efl Neden Tehnični podatki: - Premer žaginega lista pribl. 500 mm - Hitrost vrtenja žaginega lista 2800 min⁻¹ - Območje reza npr. do pribl. 180 x 150 mm ali 150 x 200 mm - Dolžina pomika pri 90° rezanju: 5 – 600 mm - Poševni rezi do 45° mogoči - Priključek na stisnjen zrak: 7 bar - Poraba zraka na delovni cikel brez / s pršenjem: 50 / 64 l - Pogon: 400 V / 4,0 kW - Potrebni prostor pribl. Š 2750 x V 1600 x G 1350 mm - Teža pribl. 800 kg - z: digitalnim prikazovalnikom, pnevmatskim vpenjalom, samodejnim izklopom na koncu profila

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Oprema: dokumentacija / priročnik, Tehnične podatke in rezalni diagram lahko prenesete ob strani. 730 mm na hod, omejeno na 3 ponovitve. Žagine liste Ø 500 x 4,4 x 30 mm. Rezanje le pod kotom 90°. Maksimalna dolžina reza pri 3 ponovitvah: 2180 mm. Pgjdpsy D Sywofx Andon

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Pgodpfxjy Ah Tkj Anden Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0799132963, Trdna lita konstrukcija z integrirano vrtljivo mizo zagotavlja brezhibno podlago profila za natančno rezanje pod kotom. Žagalni glavi je mogoče neprekinjeno nastavljati v območju od 0° do 45° levo in desno. Pgsdpfjxxzdlsx Anden

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Lot 3 kopirnih rezkalnih strojev Elumatec KF78/23. 2 popolnoma delujoča (100%). 3. je 50% delujoč, vendar ga je mogoče brez težav obnoviti ali uporabiti za nadomestne dele. Priloženi so različni rezervni deli. Horizontalna obdelovalna površina: Z omejevalom: 300 x 100 mm S šablono: 270 x 70 mm Vertikalna obdelovalna površina: Z omejevalom: 290 x 100 mm Pedpsyzfl Isfx Andjgn S šablono: 230 x 70 mm 12.000 vrt/min Obseg vpenjanja: 150 x 150 mm Napajalna napetost: 230/400V, 3-fazna Cena za komplet 3 strojev, brez dovajalnih miz.

Stanje: dober (rabljeno), Leto izdelave: 2013, Dvostranska kapna žaga za aluminij Listi žage se lahko zavrtijo in nastavljajo po nagibu. Upravljanje E355 Vključno s krožnimi žaginimi listi in odsesavanjem Tehnični podatki: Najmanjša dolžina reza pri 90°: 375 mm Največja dolžina reza: 4500 mm Kot zasuka proti notranjosti pnevmatsko 90° - 45° (ročni nastavki do 22,5° navznoter in do 140° navzven z digitalnim prikazom) Kot nagiba proti notranjosti pnevmatsko 90° - 45° (vmesni koti ročno z digitalnim prikazom in revolverjskim prislonom) Premer lista žage: 550 mm Hitrost žaginega lista: 2250 1/min. Izhodna moč motorja: 4 kW Mere: pribl. 5790 / 1840 / 1985 mm Teža pribl.: 2110 kg Pgsdpfsyw R Rzox Anden

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 485 mm, pomik po osi Z: 340 mm, skupna višina: 2.000 mm, skupna širina: 1.600 mm, skupna masa: 5.500 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 6.000 W, največja dolžina izdelka: 7.500 mm, število osi: 3, Cette Elumatec SBZ 131 à 3 axes a été fabriquée en 2010. Elle offre un déplacement impressionnant de l’axe X de 4 200 mm, un déplacement de l’axe Y de 485 mm et un déplacement de l’axe Z de 340 mm. La machine est équipée d’une tête porte-outil rotative à 8 positions et d’une vitesse de broche maximale de 6 000 tr/min. Si vous recherchez des capacités d’usinage de profilé de haute qualité, envisagez le centre d’usinage de profilés CNC Elumatec SBZ 131 que nous proposons à la vente. Contactez-nous pour plus de détails. • Commande : PC industriel avec logiciel eluCam ; moniteur couleur 15" • Tourelle/porte-outil : tourelle rotative à 8 positions avec changeur d’outils à 8 positions • Avance rapide : X 60 m/min ; Y 30 m/min ; Z 30 m/min • Interface outil : BT30 • Systèmes de pinces : ER25 / ER32 • Diamètre de lame de scie : env. 300–420 mm Caractéristiques techniques Pgedpfx Ajyt Ifyondsn Taille du cône BT 30

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, skupna masa: 9.000 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 5.500 W, število osi: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret tool changer. If you are looking for high-quality profile machining capabilities, you should consider the Elumatec SBZ 130 CNC profile machining center we are offering for sale. Contact us for further details. • Control system: Ferrocontrol CNC • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm • Spindle: Pjdpfeyt Hg Njx Andegn • Type: high-speed milling spindle • Tool system: • Tool changer: turret head • Tool positions: 8

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osni CNC center za obdelavo profilov Elumatec. Različica: 7,8 m, pomiki X/Y/Z: 7720 mm/845 mm/620 mm, največja dolžina obdelave čelno/stransko: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, največja hitrost vretena: 24.000 vrt/min, vpenjalo orodja: HSK-63F, orodna mesta: 8, vpenjalne naprave: 8, dimenzije stroja X/Y/Z: pribl. 11.250 mm/3.400 mm/2.950 mm, teža: pribl. 7.400 kg, delovne ure po proizvodnem sistemu: pribl. 42.200 h. Stroj nima števca ur. Dokumentacija je na voljo. Ogled na lokaciji je možen. Psdpfey Aafxjx Andjgn

Stanje: rabljeno, Leto izdelave: 2007, Technical data: Speed: 2800 rpm Saw blade: ø 380 mm Psdpfsrwlwvox Andjgn Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (W x D x H), approx.: 1760 x 800 x 1680 mm

Stanje: rabljeno, Avtomatski pomik preko Elgo krmiljenja E 255 Za montažo na katerokoli enoglavno žago Elumatec (desno) Podpfx Asywxwpsndsgn Maksimalna dolžina pomika: 3000 mm

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, SBZ 122/33 Profile Machining Center 3.8 m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to preserve the visible profile surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Fast positioning of the machining unit (up to 60 m/min) along the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders allow axis referencing unnecessary. Technical Data: Podpsw Dzagjfx Andogn X-axis travel range: 3800 mm Max. travel speed: 60 m/min Y-axis travel range: 350 mm Max. travel speed: 30 m/min Z-axis travel range: 280 mm Max. travel speed: 30 m/min Max. machining length for facing operations left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard tool holders and 1 holder for rotating angle head). Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool holders (tools not included) Safety fence left and right Front light barrier 4 horizontal pneumatic material clamping units Automatic clamp positioning 1 foldable material stop Central chip disposal with chip bin Dosing spray device Milling spindle with integrated rotation unit for angle head Rotating angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is supplied as standard with a front light barrier system. Side protection is provided by safety fences. If rear protection is required, this must be arranged by the customer, or request an offer for our safety fences. Including: Profile bar length measurement Additional automatic tool changer Various tool holders and used cutters

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 6.000 mm, premer žaginega lista: 550 mm, kot novo, prejšnje podjetje je prenehalo poslovati Podsy Rp Tzspfx Andsgn

Leto izdelave: 2024, stanje: skoraj kot novo (rabljeno), Stroj kot nov, prejšnji lastnik je prenehal z dejavnostjo. Pgodpoy Rp D Hefx Andon

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj Leto izdelave: 2007 Informacije o izdelku: Maks. dolžina reza: 6.000 mm Maks. premer žaginega lista: 380 mm Območje zasuka žagine glave je brezstopenjsko nastavljivo od 0° do 45° levo in desno. Možni so rezi na notranjo in zunanjo mero. Zaskok pri 15°, 30° in 45°. Hidropnevmatski pomik žage za natančen rez, brezstopenjsko nastavljiv s hitrim pomikom. Vertikalne in horizontalne pnevmatske naprave za vpenjanje zagotavljajo optimalno fiksacijo profila. Elektronika E 111: Ročna nastavitev dolžine reza z digitalnim prikazom E 111. Preklop iz absolutne na verižne dimenzije. Shranjevanje dejanske vrednosti ob izpadu električnega omrežja. Tehnični podatki: Najmanjša dolžina reza: 520 mm Električni priklop: 400 V, 3~, 50 Hz Moč posameznega motorja: 3 kW Priklop stisnjenega zraka: 7 bar Priložena dodatna oprema: Psdpfx Anoyu Hupjdogn 1x fiksno delovno podlago

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Elumatec SBZ 130 is a 3-axis profile machining centre designed for efficient processing of aluminium, steel, and stainless steel profiles. All operations such as milling, drilling, and tapping are carried out with the profile stationary, protecting its surface. Axes: 3-axis control, with the tool spindle as an additional axis. Machining length (X Axis): 7200 mm Travel (Y Axis): Typically 485 mm (Vmax. 60 m/min). Travel (Z Axis): Typically 340 mm (Vmax. 60 m/min). Spindle speed: Standard 6000 rpm, or optionally high-speed spindle (18,000 rpm). Spindle power: 5.5 kW. Tool magazine: Integrated turret head for 8 tools or 4 angle heads, ensuring short tool change times. Control system: Windows operating system with eluCam software. 18.5” PC panel, USB ports, and network connection. Clamping system: Automatic positioning of pneumatic clamps. Compressed air supply: 7 bar. MACHINE: Prepared tooling dedicated for PVC+ STEEL processing: - Tool holders - Reducer for steel machining Pjdpjyt H Uyefx Andsgn - Special tools with chip breaker - Dedicated programs for door profile processing,

Stanje: zelo dobro (rabljeno), Dostava v EU: 350 evrov Pgjdpfxsl Sklge Andon

Leto izdelave: 2018, stanje: dober (rabljeno), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" display Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Automatic clamp positioning Two separate work zones suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming via control device High-speed spindle up to 18,000 rpm Incl. 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Travel speed X-/Y-/Z-axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Pjdpfx Ansx Diqwsdjgn Total operating hours: 30,844 h Total spindle hours: 11,583 h

Leto izdelave: 2018, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Machine Information: The machine comes from a metalworking company specializing in the production of aluminium windows, doors, and façades. It was purchased in 2018 to relieve several 5-axis machines, specifically for aluminium entrance door manufacturing. Due to internal restructuring, the machine was no longer used and became available. The machine has been carefully cleaned, inspected, and serviced on the premises of Weyand. All worn components have been replaced. Programming can be done either directly at the machine (eluCam) or via the included office software eluCad. The software option package for data import of ECW, NCW, and V6 files (e.g., LogiKal or Wictop) is also included. Machine Description: - Efficient machining of aluminium, plastic, and steel profiles - A-axis infinitely adjustable from -120° to +120° - Linear guides for clamp shifting - Enhanced machining results through intelligent control technology - Rapid positioning of the machining unit (up to 120 m/min) via dynamic servo drives - Thread cutting without floating tap holder - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No referencing run required for main axes thanks to absolute encoder systems - Collision avoidance via automatic clamp detection and positioning - Power torque milling motor with closed-loop speed control for short spindle acceleration and braking times - Certified, drive-integrated safety functions Low power consumption due to intelligent control technology. Energy recovery through common DC-link coupling of axis drives with feedback and buffering of braking energy. Green-Line cooling unit for control cabinet with reduced energy consumption - Windows operating system - 15" flat panel display, USB ports and network connection - Simple and user-friendly programming via eluCam at the operator terminal, even during machining operations - Remote maintenance via TCP/IP with available internet connection Equipment: - Operator safety enclosure - Four horizontal pneumatic clamping systems - Material stop left - Minimal quantity lubrication system - Handheld control device - Depth gauge Technical Data: - Max. machining length without end-face operations: 4,050 mm - X-axis travel: 4,176 mm, Vmax 120 m/min - Y-axis travel: 1,040 mm, Vmax 60 m/min - Z-axis travel: 540 mm, Vmax 30 m/min - Machining directions 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm - Milling spindle speed: max. 20,000 rpm - Milling spindle power: 7 kW, S1 (water-cooled) - Tool interface: HSK-F63 - Automatic tool change - Twelve tool positions in the automatic magazine - Max. disc milling cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp shifting - Basic clamp (with round guide) - Software: eluCam - Compressed air connection: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute (with spraying): approx. 185 l Pgodpoyr H Absfx Anden Accessories included (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disc milling cutter - Disc milling cutter D=92x6.0 mm, Z=14, d=16, carbide teeth - Right stop SBZ 122170171173 with second clamping circuit, for machining oversized parts - Various used tool holders and milling cutters - ESTA chip extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW and V6 files

Leto izdelave: 2009, stanje: rabljeno, 3-osni obdelovalni center z avtomatsko menjavo orodja za aluminijaste ali PVC profile Maks. pomik X-os: 3.850 mm Maks. pomik Y-os: 350 mm Maks. pomik Z-os: 280 mm Windows krmiljenje z USB priključki Pgedpfxoyqyaqe Andjn Brezstopenjsko nastavljivo število vrtljajev do 22.000 min⁻¹ Ročni upravljalnik Minimalno mazanje s pršenjem Menjalnik orodij z 2 magazinama (skupaj 10 mest plus kotna glava) Prepoznavanje in premik vpenjal 2 svetlobni zavesi in 2 materialna prislona omogočata nihajno delovanje Skupaj 8 vpenjal za material Vreteno v dobrem stanju, sila izvleka vretena: 12 kN Teža: cca. 2.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 193 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 480 mm, pomik po osi Z: 340 mm, največja širina rezanja: 335 mm, dolžina obdelovanca (maks.): 6.000 mm, največja hitrost rezkalne vretena: 6.000 obr/min, dolžina odseka (maks.): 6.000 mm, TECHNICAL DETAILS – Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control system: eluCAM graphical interface, Windows XP operating environment Workstations: 2 independently operating stations Revolver tool changer: 8 tools, servo-driven Tool holder: BT 30 Disc cutter diameter: 180 mm Tool length: 150 mm (measured from holder interface) Travel Paths X-axis travel: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining) Y-axis travel: 480 mm Z-axis travel: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y/Z-axes: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electrical connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT - Two independent workstations with light curtain and camera system - Fixed angular milling head for 2 tools, ER20A, up to 18,000 rpm - Swivel angular milling head 4 × 90°, ER20, up to 22,000 rpm - Non-swiveling angular milling head for steel, ER20A, 1,554 rpm - Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts - Carbide-tipped saw blade Z=100, D=300 mm, kerf 3.2 mm - Tool holder i=1:3.86 for 18,000 rpm, ER25 - Cooling/lubrication unit for steel machining - Disc milling cutter holder BT30, D=16 mm - Disc milling cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS – Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Pgsdpfx Ajwprmzendon Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable to 90° and 45° (interior); intermediate angles and acute 22.5° adjustable manually with digital display Cutting angle (tilt): pneumatically adjustable to 90° and 45° (interior) Sawing direction: saw blades move from bottom to top Control System Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic clamping Operating system: Windows Saw Unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 hp) Saw blade cooling: included Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electrical connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT - Automatically closing safety covers - Electronic positioning of heads with +/- 0.1 mm/m accuracy - Digital angle display for manually adjustable special angles - Pneumatically adjustable saw blade rotation and tilt angles - Operation via Windows control system with 8.4" display and handwheel - Saw blade cooling system included - Saw unit with bottom feed for optimal cutting force

Leto izdelave: 1985, stanje: dober (rabljeno), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Minimum cutting length at 90° and 45°: 335 mm - Cutting range: see attached diagram - Manual swivel range inward: 90° - 22.5° - Manual tilt range inward: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per cycle approx.: 64 l Pjdoimdlrjpfx Andogn - Space requirements approx.: W 4500 x H 1950 x D 1600 mm - Weight approx.: 1400 kg - With: - Adjustable cutting length with positioning control - Positioning control renewed ca. 2002 by WOLFF - Saw unit can be swiveled and tilted for tall and wide profiles - Also suitable for compound/miter cuts

Leto izdelave: 2022, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6287010291, Elumatec SBZ 682 XXL CNC obdelovalni center za aluminijaste profile Podpfx Anszawt Tjdjgn Na voljo za prodajo: Elumatec SBZ 682 XXL, visoko zmogljiv CNC obdelovalni center, namenjen učinkoviti in natančni obdelavi aluminijastih profilov. Največja dolžina profila znaša 7,5 metra. Elumatec je kot dodatna oprema ponujal tudi različico z dolžino 10,5 metra. Glavne značilnosti: • Do 8 CNC vreten za rezkanje in vrtanje • 360° obdelava za maksimalno prilagodljivost • Idealno za aluminijaste okenske, vratne in fasadne profile • Obdelava profilov do pribl. 10,5 metra dolžine • Avtomatsko nalaganje, vpenjanje in obdelava • Visoka produktivnost in natančnost za industrijsko uporabo Dostopnost na trgu Elumatec SBZ 682 XXL je na trgu rabljenih strojev izjemno redko na voljo. Primerljive so predvsem novejše naprave, kot je SBZ 686 XXL, ki prav tako spada v isto družino izdelkov in nudi dober vpogled v funkcionalnost in zmogljivosti. Za dodatne informacije, tehnične podatke ali dogovor za ogled nas kontaktirajte.