Dehairing Stroj Za Prašiče nakup rabljenega (87.240)

Stanje: rabljeno, Brivina za odstranjevanje ščetin pri prašičih Rothman Dimenzije: 230x120x135 cm Lrodpfx Aen Nxxzsdkoi

Stanje: rabljeno, Stroj za odstranitev ščetin prašičev Baumann Dimenzije: 240 x 100 x 145 cm Lrodon Nxxpspfx Adkei

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Lsdpev T Rllsfx Adkjri

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna masa: 8.700 kg, dolžina obdelovanca (maks.): 165 mm, premer obdelovanca (maks.): 35 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of cavities: 6 Maximum output: 7,200 bottles/h Product dimensions Maximum preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Maximum neck finish diameter: 38 mm Neck height: 9–27 mm Lodpfoyrfvgjx Adkjri Maximum bottle height: 350 mm Maximum bottle diameter: 105 mm Maximum bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow moulding module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow moulding module: 6,300 kg Control cabinet: 1,200 kg Preform feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10% Frequency: 50 Hz ±1% Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, obratovalne ure: 10.643 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 815 mm, pomik po osi Z: 815 mm, največja hitrost vrtenja: 3.600 obr/min, model krmilnika: Heidenhain iTNC 530, Retrofit stroja je bil izveden leta 2010! TEHNIČNI PODATKI Pomik X-os: 1.500 mm Lsdpfxoyrdxtj Adkori Pomik Y-os: 815 mm Pomik Z-os: 815 mm Vpenjalna miza: 3.250 x 815 mm Nosilnost mize: 5.000 kg Hod pinole: 150 mm Vreteno: SK 50 Območje vrtljajev: 40–3.600 min⁻¹ PODROBNOSTI STROJA Krmiljenje: Heidenhain iTNC 530 Rezkalne glave: uporaba 1/2/3/4-glavne postavitve Skupna potrebna moč: 44 kW Mere & teža Potrebni prostor: ca. 8 x 4 x 4,5 m Transportne mere osnovnega stroja: ca. 6 x 3 x 3,5 m Električna omara: ca. 2,6 x 0,6 x 2,6 m Teža stroja: ca. 20 t Delovne ure Vklopne ure krmiljenja: 20.987 h Vklopne ure stroja: 19.703 h Čas programskega teka: 10.643 h OPREMA Hidravlika Razni pločevinasti deli

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Lredeyqybujpfx Adksi Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, model krmilnika: POWER CONTROL PC22, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Glue pot: for EVA hot-melt adhesive Pre-melter: for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for coarse processing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Lrodoyqx U Hepfx Adksi Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: AH/335516, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 68 A, Oprema: CE označba, TEHNIČNE PODROBNOSTI Ljdjyuylujpfx Adksri 1. Enota: Razpršilna naprava Orodja priložena 2. Enota: Lepilni agregat 3. Enota: Pritrdilni valji Orodja priložena 4. Enota: Kap agregat Orodja priložena 5. Enota: Grobi rezkalni agregat Orodja priložena 6. Enota: Agregat za zaokroževanje robov Orodja priložena 7. Enota: Radijusni vlekalni agregat Orodja priložena 9. Enota: Ploski vlekalni agregat Orodja priložena 10. Enota: Krtačni agregat Orodja priložena PODROBNOSTI O STROJU Napetost: 400 V Poraba toka: 68 A Število transportnih paketov: 2 OPREMA CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, številka stroja/vozila: 20.082, Funkcionalnost: popolnoma funkcionalen, moč: 16,2 kW (22,03 KM), vhodna napetost: 400 V, skupna višina: 1.670 mm, skupna dolžina: 6.000 mm, skupna masa: 2.200 kg, TEHNIČNE PODROBNOSTI Število obdelovalnih enot: 10 1. Enota: Enota za predrezkanje Orodja so vključena 2. Enota: Lepljenje 3. Enota: Pritiskalni valji Orodja so vključena 4. Enota: Krajšalna enota Orodja so vključena 5. Enota: Groba rezkalna enota Orodja so vključena 6. Enota: Lrodpfxsyuyfzs Adkji Enota za zaobljenje robov Orodja so vključena 7. Enota: Fina rezkalna enota Orodja so vključena 8. Enota: Enota za zaobljenje robov Orodja so vključena 9. Enota: Enota za vlečenje radija Orodja so vključena 10. Enota: Sčesalna enota Orodja so vključena PODROBNOSTI STROJA Napetost: 400 V Moč: 16,2 kW Dimenzije in teža Dimenzije (D x Š x V): 6.000 x 1.415 x 1.670 mm Teža stroja: 2.200 kg OPREMA CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 42 A, skupna višina: 1.800 mm, skupna dolžina: 4.800 mm, skupna širina: 1.000 mm, Oprema: CE označba, TEHNIČNI PODATKI Število enot: 9 1. enota: Enota za predrezkanje Orodja vključena 2. enota: Enota za lepljenje 3. enota: Pritiskalni valji Orodja vključena 4. enota: Enota za kapiranje Orodja vključena 5. enota: Enota za zaobljenje robov Orodja vključena 6. enota: Enota za vlečenje radija Orodja vključena 7. enota: Enota za zaobljenje robov Orodja vključena 8. enota: Enota za vlečenje ploskev Orodja vključena 9. enota: Sčetkasta enota Orodja vključena PODROBNOSTI STROJA Napetost: 400 V Tok: 42 A Dimenzije (D x Š x V): 4.800 mm x 1.000 mm x 1.800 mm Lredpfx Adoyux Riekoi OPREMA Lepilni lonec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, številka stroja/vozila: 200.04.007.13, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), višina obdelovanca (maks.): 60 mm, skupna višina: 1.700 mm, skupna dolžina: 4.800 mm, skupna širina: 900 mm, TEHNIČNE PODROBNOSTI Min. višina obdelovanca: 8 mm Maks. višina obdelovanca: 60 mm PODROBNOSTI O STROJU Moč: 11 kW Omrežna napetost: 400 V Lodpfx Aoyux Egjdkeri Tok: 28 A Faze: 3 Frekvenca: 50 Hz Dimenzije in teža Dimenzije (D x Š x V): 4.800 x 900 x 1.700 mm Teža stroja: 1.250 kg OPREMA Multifunkcijska rezkalna enota Predrezkalna enota Oblikovalska rezkalna enota Lepljenje enota

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, številka stroja/vozila: 10659, premer spodnjega valja: 300 mm, premer zgornjega valja: 350 mm, delovna širina: 3.000 mm, najv. debelina pločevine: 25 mm, lastna masa: 24.000 kg, TEHNIČNE PODROBNOSTI Število valjev: 4 kos. Maks. debelina pločevine: 25 mm Maks. delovna širina: 3.000 mm Premer zgornjega valja: 350 mm Premer spodnjih valjev: 300 mm PODROBNOSTI STROJA Lredpsyua Ezsfx Adkei Krmiljenje: konvencionalno Dimenzije in teža Dimenzije (D x Š x V): 6.300 x 2.000 x 1.800 mm Lastna teža: 24.000 kg Transportni paketi: 1 kos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: 3115, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.000 kg, dolžina podajanja os X: 2.000 mm, dolžina tračnega lista: 4.870 mm, širina tračne žage: 32 mm, TEHNIČNE PODROBNOSTI Lrjdpfx Adjyuaz Nekji Dolžina tračnega lista: 4.870 mm Širina tračnega lista: 32 mm Hitrost tračnega lista: 110 m/min Kapaciteta rezanja okroglih profilov: 340 mm Maks. dolžina podajanja: 2.000 mm PODROBNOSTI STROJA Upravljanje: Konvencionalno Vrsta žage: Avtomatska Horizontalno/Vertikalno: Horizontalno Dimenzije in teža Dimenzije (D x Š x V): 2.000 x 1.850 x 1.800 mm Lastna teža: 2.000 kg Transportni paketi: 3

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Lsdpfxjytr Hbs Adkjri Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, moč: 25 kW (33,99 KM), višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, hitrost pomika os X: 18 m/min, Oprema: CE označba, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Max. feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge heater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting to size Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Rounding Number of motors: 2 NC positioning Lrsdpfxjytr Rge Adkji Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total installed power: 25 kW EQUIPMENT Panel support guide Spraying unit Control system with more than 20 control options CE marking The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 90 207, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 650 mm, poteza s peresom: 100 mm, največja hitrost vretena: 2.000 obr/min, Brez minimalne cene – zagotovljena prodaja za najvišjo ponudbo! TEHNIČNI PODATKI Pomik osi X: 1.000 mm Pomik osi Y: 500 mm Pomik osi Z: 650 mm Območje vrtljajev pogonske vretena: 40 - 2.000 min⁻¹ Hod pinole: 100 mm Območje pomika: 5 - 2.000 mm/min Hitri pomik: 4.000 mm/min Lodpfxsyv Avts Adkori Držalo orodja: SK 40 PODROBNOSTI O STROJU Proizvajalec krmiljenja: Heidenhain

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1986, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 900 mm, pomik po osi Z: 1.000 mm, največja hitrost vrtenja: 1.700 obr/min, model krmilnika: Heidenhain TNC 155, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Pomik osi X: 2.000 mm Pomik osi Y: 900 mm Pomik osi Z: 1.000 mm Vpenjalna površina: 2.200 x 960 mm Območje vrtljajev: 20 - 1.700 obr/min Vpenjalo orodja: SK 50 Hitri pomik: 10 m/min Število položajev glave za rezkanje: 4 Lredpfoyv Ar Uex Adkoi PODROBNOSTI O STROJU Model krmiljenja: Heidenhain TNC 155 Dimenzije in teža Zahtevan prostor (D x Š x V): pribl. 7.000 x 4.200 x 2.900 mm Teža stroja: pribl. 16 t

Stanje: rabljeno, OTT Tornado FÜ + PU SPS-Comp. krmiljenje, 7" TFT barvni zaslon na dotik CM-CombiMelt za EVA in PUR talilna lepila Enota za predrezkanje - spajanje Popolnoma avtomatski valjčni magazin Popolnoma avtomatski magazin za robove Pnevmatsko poravnavanje 0-3° Poravnalno rezkanje - 12 mm Radialno rezkanje R-2, R-5 Posnemanje robov 0°/15°/30°/45° Lrsdpfxoywuvne Adksi Zaobljanje vogalov Radialni strgalnik Površinski strgalnik Zvočno izolirana kabina z odsesavanjem Čistilni komplet s štirikratno pršilno napravo, finim polirnim strojem in pršilno napravo za mazivo Prva dostava 2006 Stroj je DELOVNO PREVERJEN, v VRHUNSKEM STANJU Na zalogi v Lieboch

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Ljdoywh Epspfx Adkjri Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Lrsdpeywh A Iofx Adkoi Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Lrjdpsywhv Uefx Adksi Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Lrodpfxsdd Hi Eo Adksi Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping Lredpjv Tb Hgsfx Adksi automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Lrsdpfx Aer A Eq Rodksi Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. Lsdpfx Ajcuwptodksri 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)