Keppler nakup rabljenega (8)

Stanje: rabljeno, največja dovoljena obremenitev: 12.050 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2004, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.090 mm, Oprema: ABS, dvižna zadnja plošča, Keppler beverage trailer Swing-wall body with Dautel tail lift, 2,000 kg capacity, Mercedes axles, disc brakes, air suspension, ABS. Itjdpfov Ndn Eex Ah Usn Internal body dimensions: Length: 7.30 meters Width: 2.45 meters Height: 2.09 meters

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.400 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, teža obdelovanca (maks.): 6.000 kg, največja hitrost vrtenja: 10.000 obr/min, dolžina orodja: 800 mm, Nova stroj HDC3000 s 6 osmi Itsdpfx Ahez Ipnzj Ujn • Pomiki X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 z ročnim koleščkom • NC-rotacijska miza za 5-stransko obdelavo 1250 mm x 1600 mm • 2-osni NC univerzalna glava za vrtanje in rezkanje, popolnoma simultano in pozicijsko delovanje • Vreteno 10.000 vrt/min HSK100, S1=220 Nm navor vretena • Sistem za menjavo orodja HSK100 / 60 postaj - orodja do 800 mm • Transporter za odrezke • Optimiziran za 5-stransko obdelavo vključno z globokim vrtanjem • Hladilna sredstva • Puhalnik za notranje/zunanje zračno čiščenje • IKZ 60 bar za globoko vrtanje • Popolno ohišje • Velik delovni krog 2300 mm • vključno z nosilci • vključno z razpršilno pištolo • vključno z garancijo • Kratki dobavni roki, vmesna prodaja pridržana.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Immediately available: Gantry-type machine FS 480 • Total travel range X = 4800 mm, ideal for flexible large-part machining • Travel ranges X = 4,800 mm, Y = 1,500 mm; Z = 3,500 mm • iTNC 530 control with wireless handheld unit HR 550 FS, operator cabin on the gantry • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation per gantry • HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar Ijdpfxsz Ipl To Ah Ustn • Dust protection packages for safeguarding guides and drives • BA 4 per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the machine • Process monitoring ToolScope basic system • Additional operator panel at the rear of the machine • Partial enclosure consisting of machining area and sheet metal door, rear side with safety fence offering clear view into the work area • Incl. fixators • Cooling units • Incl. internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, immediately deliverable — subject to prior sale — Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Immediately available: Gantry Milling Machine FS 1200 • Total travel X=12,000 mm – ideal for flexible large-part machining • Travel axes: X=12,000 mm, Y=1,500 mm, Z=3,500 mm • Control: iTNC 530 with wireless HR 550 FS handwheel, operator cabin mounted on gantry • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per gantry Itedpoz Ipmdjfx Ah Uon • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS (Internal Coolant Supply) air up to 6 bar • Dust protection packages for guiding rails and drives • BA 4 per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the unit • Process monitoring ToolScope basic system • Additional control panel at the rear of the unit • Partial enclosure consisting of work area and steel door, rear with safety fence and unobstructed view into the working area • Including leveling pads • Chiller units • Including internal tool cooling (closed cooling circuit) with chiller unit • Short delivery time, immediately available, ---subject to prior sale--- Inspection by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, • Travels: X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining: 3000 mm x 1600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning mode • Spindle: 10,000 rpm, HSK 100, 130 Nm spindle torque • Tool changer system HSK 100 / 40 stations for tools up to 750 mm long • Swarf screw conveyors in X-axis, optimized chip removal • Chip conveyor (scraper-type) for transverse discharge, make: Knoll • Coolant supply 900 l, make: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole drilling • Enclosure with safety glass panels, open top for optimized crane loading • Split sliding doors at the front • Split sliding doors on the operator side • Wireless probing system RMP 60 • Including wash gun • Including platforms on the loading and operator side • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine Itsdpsz Ipl Hofx Ah Uon • Y-axis ball screw replaced in September 2021, including bearings • X-axis linear guide and guide carriages replaced in July 2023 • Milling spindle overhauled May 2023 (new clamping set, new clamping cartridge, new rotary feed-through, general inspection performed) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: clamps • Optional: commissioning/installation • Optional: transport • 23,122 total spindle hours • 53,991 total machine hours • Year of manufacture: 2010 Subject to prior sale

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Immediately available travelling column machine FS 2100 • Total travel distance X = 21,000 mm, ideal for flexible large part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless manual pulse generator HR 550 FS, operator cabin on the travelling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for guiding rails and drives • BA 4 per column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the machine • Process monitoring ToolScope basic system • Additional control panel at the rear of the machine • Partial enclosure consisting of work area and sheet metal door, rear side with safety fence providing clear view into the work area • incl. locators • Cooling units • incl. internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, immediately available, ---subject to prior sale--- Inspection possible by arrangement Itedjz A Icyopfx Ah Ujn Spindle hours: approx. 9,079 SPECIAL PRICE!

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.250 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, Pomiki osi X=2000 mm, Y=1500 mm, Z=1250 mm • Krmilnik Siemens 840 DsL • NC-okrogla miza za 4-stransko obdelavo 1250 mm x 1250 mm • Horizontalno vreteno HSK100 • Vreteno 2500 vrt/min HSK 100, 2200 Nm vrtilnega momenta • Približno 9500 ur vretena • Sistem menjave orodij HSK 100 / 40 mest • Transporter za ostružke • Sistem odpihavanja notranji / zunanji zrak Minimalno mazanje za suho obdelavo litine • Popolno ohišje Iodez Ipmkepfx Ah Uotn • Velik moteč krog 2300 mm • 2-stopenjski menjalec palet • Kratek dobavni rok, pridržujemo si pravico do vmesne prodaje • Letnik 2010 Močna opcija dovoda hladilne tekočine • Interni dovod hladila 60 bar za globoko vrtanje

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.400 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, teža obdelovanca (maks.): 6.000 kg, največja hitrost vrtenja: 10.000 obr/min, dolžina orodja: 800 mm, Nova stroj HDC3000 s 6 osmi • Pomiki X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 z ročnim koleščkom • NC-rotacijska miza za 5-stransko obdelavo 1250 mm x 1600 mm • 2-osni NC univerzalna glava za vrtanje in rezkanje, popolnoma simultano in pozicijsko delovanje • Vreteno 10.000 vrt/min HSK100, S1=220 Nm navor vretena • Sistem za menjavo orodja HSK100 / 60 postaj - orodja do 800 mm • Transporter za odrezke • Optimiziran za 5-stransko obdelavo vključno z globokim vrtanjem • Hladilna sredstva • Puhalnik za notranje/zunanje zračno čiščenje • IKZ 60 bar za globoko vrtanje Itsdpfx Ahoz Ahgns Usn • Popolno ohišje • Velik delovni krog 2300 mm • vključno z nosilci • vključno z razpršilno pištolo • vključno z garancijo • Kratki dobavni roki, vmesna prodaja pridržana.