Dehairing Stroj Za Prašiče nakup rabljenega (87.269)

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Ljdpsd Supgofx Adkjri Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit Lrsdjhy Tlrjpfx Adksi with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) Ljdpfxsl D Rp Eo Adksri F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Edge cutting device Lrjdpfjwiwnqex Adkoi Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Lrsdpfx Adolc Ewiokei Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. Lodpfsg Nn E Nsx Adkeri • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Ljdpfx Ajt Dx U Ssdksri Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!) Lrjdpfouxqzusx Adksi

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Lredett Da Djpfx Adkji Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, With the RFM 320 S SET model, we offer you a grinding machine that allows you to produce bevels up to 16 mm wide quickly and with optimal grinding quality in a single pass. Short setup times ensure efficient processing, even for individual workpieces. The RFM 320 S SET is equipped with a grinding belt oscillation system featuring pneumatic belt cleaning and a pre-milling unit. Standard equipment RFM 320 S SET: › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) › Bevel grinding device for bevels up to 16 mm width › Grinding belt oscillation with pneumatic belt cleaning Lsdpfxsf E Nqdj Adkjri › Integrated base for feed unit › 16A socket for feed › Suction connection Ø 80 mm Pre-milling unit Undercarriage Extendable table extension Setup dimensions (L x W x H in mm): 1,300 x 690 x 1,010 Weight: 145 kg

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Lsdpfov Hm Nmjx Adkjri Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 1,4 kW (1,90 KM), skupna masa: 880 kg, skupna dolžina: 2.600 mm, skupna širina: 1.250 mm, skupna višina: 1.760 mm, vhodna napetost: 400 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nujno zaustavitev, Fleksibilna sita omogućuje učinkovito razdvajanje, klasifikaciju i sortiranje rasutih materijala u industrijama kao što su rudarstvo, reciklaža, građevinarstvo i agregati. Kupci imaju koristi od preciznog sortiranja, neprekidnog rada i konstrukcije koja zahtijeva malo održavanja, čime se smanjuju zastoje i troškovi rada. Glavne značajke: • Robustan, stabilizirani okvir za kontrolirane vibracije i precizan protok materijala • Modularni dizajn s izmjenjivim ulošcima sita za fleksibilnu konfiguraciju • Izdržljiva konstrukcija koja zahtijeva malo održavanja i omogućuje jednostavan pristup dijelovima podložnim habanju • Pouzdan pogonski sustav za konstantne performanse i ujednačenu kvalitetu proizvoda Lrodpfjxdwdxex Adksi Tehničke karakteristike: Duljina 2,6 m · Širina 1,25 m · Visina 1,76 m · Maks. kapacitet 10 m³/h · Maks. širina kašike 0,8 m · Snaga 2 × 0,7 kW · Površina sita 0,9 m² · Težina 880 kg · Napon 400 V

Stanje: rabljeno, OTT Tornado - TOP Upravljanje - preko 15-palčnega barvnega zaslona na dotik za popolno avtomatizacijo in najvišje udobje upravljanja CM-CombiMelt-lepilni sistem, primeren za uporabo EVA in PUR talilnih lepil ter vseh običajnih čistilnih granul Enota za lepljenje za spajanje ivernih plošč Avtomatski valjčni magazin Avtomatski magazin za robove Dvojna kapalna enota s samodejnim nagibom 0° / 3° Rezkalna enota za ravnanje robov - rezkanje na ravno - 12 mm Fino rezkanje RADIUS - rezkanje radija - profilni nož R2 - R5 Avtomatizirano kopirno rezkanje - zaokroževanje vogalov Vlečna rezkalna enota - radij - faza Lredpfx Ajyuvbljdkoi Ravna vlečna rezkalna enota Enota za pršenje sredstva za drsnost - PU Komplet za čiščenje z enoto za fino poliranje Zelo stabilna delovna podlaga z valjčnimi tirnicami - SPREDAJ s škarjastim izvlekom Popolna oprema orodij vključena Stroj je KOT NOV v IZJEMNO DOBREM STANJU Stroj iz upokojitve Prvi zagon leta 2009, zelo malo delovnih ur Možnost leasinga Iz zaloge Lieboch

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 250 h, Funkcionalnost: popolnoma funkcionalen, English language For Sale: Guideway Grinding Machine (Converted from Metal Planer Machine) We offer a solid guideway grinding machine, originally a metal planer machine, now professionally converted. The main advantage is the relatively compact size in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required operational space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades and Equipment: • New ball screw spindles and bearings • 2 new motors + 2 refurbished motors • 3 new inverters • New Siemens SINUMERIK 802C baseline control system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Includes control cabinet, coolant tank with pump, and wall-mounted inverter for small spindle Machine is available for inspection and test by appointment. Feel free to contact us for more details. German language Zum Verkauf: Führungsbahnschleifmaschine (umgebaut aus einer Metallhobelmaschine) Zum Verkauf steht eine robuste Führungsbahnschleifmaschine, die aus einer ursprünglichen Metallhobelmaschine umgebaut wurde. Der große Vorteil liegt in den kompakten Abmessungen in Relation zur Werkstückgröße. Technische Daten: • Außenmaße (LxBxH): 4.800 x 2.500 x 2.000 mm • Erforderlicher Arbeitsraum: 4.800 x 3.500 x 2.700 mm (+ Schaltschrank, Kühlmitteltank, Zugang) • Tischgröße: 2.000 x 800 mm • Abstand zwischen den Ständern: 1.000 mm • Verfahrwege (X/Y/Z): 2.000 / 1.000 / 600 mm Ausstattung & Überholung: • Neue Kugelumlaufspindeln und Lager • 2 neue Motoren + 2 überholte Motoren Lsdpfxsxx Uudo Adkjri • 3 neue Frequenzumrichter • Neues Siemens SINUMERIK 802C baseline Steuerungssystem • Großes Schleifspindel: 2.840 U/min – überholt + neuer Motor • Kleine Schleifspindel: 18.000 U/min – überholt • Schaltschrank, Kühlmitteltank mit Pumpe und separater Umrichter für kleine Spindel (wandmontiert) inklusive Besichtigung und Testlauf nach Vereinbarung möglich. Kontaktieren Sie uns für weitere Informationen.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, 180 cm notranja mera, komplet Inox tudi valj. Popolnoma funkcionalna. 14kW motor trifazni priklop. Ljdpfx Asyvyutsdkori Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp

Stanje: rabljeno, Stroj za nanos lepila za letvice Lsdpfjyknlbex Adkori

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Vakumska ponlilka za klobase. Handtman VF 608. Polnilka je v zelo dobrem stanju. Dodanih je 10 različnih tulcev. Lsdpfxoyu Tzvo Adkjri

Stanje: zelo dobro (rabljeno), Brusilni stroj za verižne žage Ljdsywz Evopfx Adkori

Stanje: zelo dobro (rabljeno), Stroji za nastavitev zob za CV žage VOLLMER model AGSB Lsdpfeywz Dlsx Adkjri

Stanje: zelo dobro (rabljeno), CV žaga brusilni stroj VOLLMER model CNK Ljdsywzymspfx Adksri

Stanje: zelo dobro (rabljeno), Brusilni stroj za CV žage VOLLMER model CNG Lrjdpfx Aoywzwrodksi

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order confirmation Country of origin: Italy Price: €17,940 Leasing rate: €344.45 Grinding wheel dimensions: Dm. 200x78x78 mm Lrsdpfxjyv Iqvs Adkoi Speed: 2,800 rpm Distance grinding wheel to table (without magnetic chuck): 300 mm Magnetic chuck: 300x150x55 mm Grinding area: 350x150 mm Table: 500x160 mm Motor power: 3.6 kW Length: 1,020 mm Width: 820 mm Height: 2,170 mm Weight: 440 kg This surface grinding machine with fixed table is based on the R.V. 500 model, but features an extended, quadruple-mounted column with an additional robust column support. Thanks to its rigidity and geometric stability, this surface grinder is ideal for machining precision components of considerable height, whether single pieces or serial production parts from toolmaking, molds, dies, gears, and more. The vertical spindle nuts and the alignment pins of the axes on this fixed-table grinder also ensure consistently optimal working conditions. Cast iron bed for lasting geometric stability. Cast iron column, protected by bellows and mounted in four adjustable precision bearings, generously sized for this type of fixed-table grinder. Three-phase motor with double-jacket air cooling prevents overheating during continuous operation and keeps the temperature of the motor shaft and bearings consistent. The hardened, ground, and dynamically balanced shaft, mounted in precision ball bearings, is generously sized for this grinder type with a fixed table and self-adjusting via spring-preloaded tension to absorb thermal expansion. The vertical spindle is mounted in opposing, adjustable ball bearings, ensuring free movement in the grinding area and preventing dust accumulation. Metal bellows offer optimal protection for the vertical spindle. Opposing bronze nuts compensate for long-term wear of the vertical spindle on this fixed-table grinder. Alignment pins align the grinder motor on the axis, ensuring parallel surfaces over the long term. The grinder handwheel is triple-supported and connected to the spindle via two helical gears. It features a graduated dial, supported by an axial bearing, enabling material removal of 0.01 - 0.02 - 0.03 mm per pass. Rapid traverse per handwheel revolution is 2 mm. A dial with lever provides programmable micrometric feed of 0.01 - 0.02 - 0.03 - 0.04 mm per impulse, simplifying operation by eliminating continuous step control. A slot allows optimal use of the grinding wheel’s working height and clamping of non-magnetic parts and accessories, such as magnetic chucks, self-centering chucks, and angle plates. Low-voltage controls, safety devices, indicator lights, and all necessary equipment ensure compliance with safety and regulatory standards for this class of fixed-table grinding machine. Handles, design, and dimensions of the fixed table grinder meet current ergonomic standards...

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 2105 mm Mere globina 3485 mm Teža stroja 7500 kg Krmilna enota Znamka MAZATROL Glavni pogon Območje vrtljajev vretena 3500–5000 vrt/min Premer vretena 61 mm Število osi 4 Pomiki Pomik X-osi 530 mm Podajalna sila X-osi 0–6000 mm/min Hitri pomik X-osi 30 m/min Pomik Y-osi ±70 mm Podajalna sila Y-osi 0–6000 mm/min Hitri pomik Y-osi 15 m/min Pomik Z-osi 1065 mm Podajalna sila Z-osi 0–6000 mm/min Hitri pomik Z-osi 33 m/min Konjiček Ljdpfxjx D N Ipj Adkjri Premer pinole 80 mm Hod pinole 870 mm Stožec pinole MK4 Orodja Število postaj 20 Največja teža orodja 7 kg Največji premer orodja 90 mm Največja dolžina orodja 250 mm Ta 4-osni Mazak INTEGREX 200 Y je bil izdelan leta 2000. Odlikuje ga največji premer struženja 540 mm, premer zamaha 540 mm ter zmogljivost premera palice 51 mm. Stroj omogoča obdelavo kosov mase do 150 kg ter ponuja področje vrtljajev vretena do 5.000 vrt/min. Opremljen je z Mazak KM 63 sistemom za hitro menjavo orodij s 20 mesti. Če iščete visokokakovostne stružne zmogljivosti, razmislite o našem stroju Mazak INTEGREX 200 Y v prodaji. Za več informacij nas kontaktirajte. Vrsta uporabe Struženje

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Krmilna enota Ljdpfxjx D Ifte Adksri Znamka: MITSUBISHI Model: M70 Glavni pogon Število osi: 6 Hitrost vretena: 4000 obr/min Tehnične specifikacije Protipremerno vreteno: da Pogonska orodja: da Ta 6-osni Quick-Tech i60 twin je bil izdelan leta 2016 in vključuje CNC stružnico z B-osjo in pogonskimi orodji. Ima glavno vreteno z izvrtino 60 mm, pomožno vreteno z izvrtino 42 mm in največjo dolžino struženja 300 mm. Stroj omogoča simultano 4-osno obdelavo, popolno programiranje osi in ima krmilni sistem Mitsubishi M70. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Quick-Tech i60 twin. Za več informacij o tem stroju nas kontaktirajte. Uporabniške vrste Struženje

Leto izdelave: 2003, obratovalne ure: 78.554 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 8200 kg Glavni pogon Število osi: 2 Hitrost vretena: 3200 obr/min Moč motorja vretena: 30 kW Lrsdpfx Ajx D Hh Todksi Krmilna enota Znamka: SIEMENS Model: Sinumerik Pomiki Pomik po osi X: 305 mm Pomik po osi Z: 1140 mm Dimenzije Dolžina stroja: 4900 mm Ta stroj SPINNER JCL-75/1000-TC 82 je bil izdelan leta 2003. Gre za robusten horizontalni stružni stroj z maksimalnim premerom struženja nad ležiščem 555 mm in nad vozičkom 350 mm. Vključuje 12-pozicijski revolver z orodnim vmesnikom VDI 40 in močjo vretena 30 kW. Razmislite o priložnosti za nakup tega horizontalnega stružnega stroja SPINNER JCL-75/1000-TC 82. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Struženje