Deep Zrj nakup rabljenega (1.474)

Stanje: rabljeno, New: Yes Ibsdsxlhr Njpfx Ah Doc Contact us for further information.

Stanje: delavnici obnovljeno (rabljeno), -Drill diameter 5–25 mm -Drill depth 1500 mm -Tailstock Ijdpehuil Rsfx Ah Dobc -Tank -Pump -Filter

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Deep beam, used Material color: raw Total length: approx. 1,110 mm Internal length: approx. 1,102 mm for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimens.: K 140 x 60 x 4 mm Traverse bearing surface: approx. 52 mm Unit weight: approx. 7.10 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Ibodpfx Aswl Ncfsh Djc Mr. Falk Deutsch General information about the article: This item is only available for collection. If transportation or shipping of this item is desired, additional costs will apply, which can be individually inquired with us depending on the delivery location and scope.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, TECHNICAL DETAILS Drilling depth: 1,000 mm Solid drilling range: 30 mm Boring range (enlarging holes): 40 mm Spindle speed: 670 - 3,560 rpm Centre height above bed: 380 mm Centre height above floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2x400 mm Centre height above table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis – 400 mm Feed rate: 0-7,000 mm/min X-axis – 800 mm Feed rate: 0-2,000 mm/min Ijdpfxew Ekfuj Ah Dsbc Y-axis – 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor rated speed: 8,000 rpm Motor rated power: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Overall length: 6,500 mm Overall width: 3,500 mm Overall height: 2,900 mm Weight: 8 t EQUIPMENT Controller: Siemens Sinumerik 840 Dsl Including coolant system, 1,700 l 20 single-lip drills, D=6 mm–20 mm/lengths 1,200–1,750 mm Operating hours: 13,000 h

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-120 Ibsdpfx Ahjxbtzzo Dsc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 20.709 h, 2 spindles Drilling data: Spindle 1 (4 kW): 5–18 mm Spindle 2 (1.2 kW): 1–4 mm Spindle speed: Spindle 1: 600–6,000 rpm Spindle 2: 2,000–24,000 rpm Drilling depth: approx. 1,200 mm (with Ø8 mm and use of 3 steadies) Ibedpfxoww Ihqj Ah Doc Rapid traverse: 15,000 mm/min Slide stroke: 1,800 mm Machine weight: 7,500 kg

Stanje: rabljeno, Leto izdelave: 1974, Št. stroja: 414312067 Ibedpjw Syh Dofx Ah Dsc Napetost: 380 V Frekvenca: 50 Hz Nazivna moč: 13 kVA

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), Na voljo je polavtomatski vakuumski skin pakirni stroj (traysealer) Sealed Air za Darfresh skin pakiranje. Pakirna zmogljivost: 15 kos/min, zmogljivost cikla: 1,5 cikla/min, širina folije: 562 mm, maksimalne dimenzije izdelka X/Y/Z: 670 mm/470 mm/50 mm, razpon dolžine pladnja: 135 mm-700 mm, razpon širine pladnja: 120 mm-520 mm, razpon višine pladnja: 5 mm-50 mm. Dimenzije stroja X/Y/Z: pribl. 1050 mm/1650 mm/1250 mm, teža: pribl. 500 kg. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Ibjdpfxexaphbe Ah Djc

Stanje: dober (rabljeno), Included in the scope of delivery: 01x deep support beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Internal length: approx. 1,103 mm For frame depth: approx. 1,100 mm Clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support: approx. 53 mm Unit weight: approx. 2.52 kg Your contacts in our company: Mr. Andre Evering Ibodpfx Ajwwviish Dec Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, additional costs will be incurred, which can be obtained separately from us depending on the place of delivery and the scope of delivery.

Stanje: dober (rabljeno), Deep Hole Drilling Machine MEWAG - IXION TL 500 - Drilling depth approx. 500 mm - Table size 800 x 450 mm - Support / drilling table rotatable and angle-adjustable 0-360 degrees - Manual drilling stroke - Drill chuck - Various deep hole drills included - Power connection cable Dimensions: Ibsdjwm Hcljpfx Ah Doc LxWxH 1.6 x 0.8 x 1.6 meters / Weight 1300 kg Subject to errors and input mistakes.

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-2-500 Ijdsxbtzujpfx Ah Dsbc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.300 mm, največja hitrost vrtenja: 5.600 obr/min, TEHNIČNI PODATKI Podatki o vrtanju Vrtalna globina: 1.500 mm Podatki o ose Pomik X-os: 3.000 mm Pomik Y-os: 1.200 mm Pomik Z-os: 1.300 mm Podajalna hitrost X-os: 15 m/min Podajalna hitrost Y-os: 15 m/min Podajalna hitrost Z-os: 15 m/min Podajalna sila: 30.000 N Hitrost hitrega pomika: 15 m/min Podatki o vretenu Število vrtljajev: min. 300 1/min Število vrtljajev: maks. 5.600 1/min Podatki o mizi Isdpsw Izr Asfx Ah Djbc Vpenjalna površina: 2.000 mm x 1.250 mm Število utorov: 7 Obremenitev mize: 12.000 kg Vpenjalo za orodje: SK50 PODROBNOSTI O STROJU Krmiljenje: TNC430 Mere in teža Mere (D x Š x V): 8.400 x 8.300 x 4.500 mm Skupna teža: 30.000 kg OPREMA Brezstopenjsko nastavljivo število vrtljajev Brusilnik za svedre Opomba: Demontaža in nakladanje se lahko ponudita za 8.000 €.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Setmaster 5040 avtomatski stroj za razvrščanje pol z joggerjem. 24 globoko naloženih postaj s podajalnikom s sesalnim dovodom, vsaka je programsko nastavljiva. Sesalne skodelice za nežen stik s papirjem, da preprečijo označevanje. Programator z zaslonom na dotik za nadzor vseh funkcij, vključno s funkcijo vstavljanja. Proizvodna hitrost: pribl. 1.900/2.600 ciklov na uro (z nastavljivim nadzorom hitrosti). Velikost pol: največ 52 cm x 42 cm. Iedpfsxg Hz Eox Ah Debc Teža papirja: 15 – 1.000 g/m² na vseh vrstah materialov. Zaznavanje manjkajočega lista na vsaki postaji z dvojno detekcijo na izhodu. Samodejno dvigljive globoke podajalne postaje s kapaciteto 40 cm s programiranim upravljanjem. Izhodni jogger z nastavljivo višino, naklonom in hitrostjo. Becker SVT 3.100 visokozmogljiva sesalna črpalka. Napajanje: 400/440 voltov – 3 faze – 50Hz – 16A. Stroj je v obratovanju in ga je mogoče pregledati v West Yorkshireju. Možnost organizacije dostave in montaže po celotni VB (cena po dogovoru). Stroj je bil redno servisiran s strani Setmaster-usposobljenega tehnika (možna je tudi montaža in izobraževanje). Za dodatne informacije nas prosimo kontaktirajte.

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), A large-format vacuum thermoforming machine by Geiss is available. Sheet cutting dimensions (min.): 1100mm/1300mm, (max.): 2100mm/1800mm, maximum forming depth: 620mm. Additional sheet format 1: min. 850mm/750mm, max. 1850mm/1250mm. Additional sheet format 2: min. 1050mm/800mm, max. 2050mm/1300mm. Included is a separate feeding unit with pneumatic sheet separation equipment, an automatic alignment device for sheet blanks in both longitudinal and transverse direction, a pneumatic pusher for removing formed parts from the feeding unit, fully automatic central lubrication for the feeding machine, several exchange pallets for window sheet sets, a storage rack for window sheets, a vacuum control system with four independently adjustable flow stages, and an air treatment system. Documentation is available. On-site inspection is possible. Ibsdpfx Ahewih Aro Dsc

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Deep beam, used Material color: bare Total length: approx. 1,110 mm Internal length: approx. 1,102 mm For frame depth: approx. 1,100 mm Clear support span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Ibsdpfx Ahewl Ulls Dec Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transportation or shipping is required, this will incur additional costs, which can be requested from us separately depending on the delivery location and scope.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Ijdpfx Ahow E H E Re Debc Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-2-500 Ibsdpfxoxbtznj Ah Djc

Leto izdelave: 2021, Stanje: rabljeno, Leto izdelave: 2021 Novo: Ne Lastna teža: 347 kg Ibedpfxsw U Nd Tj Ah Doc Dimenzije (D x Š x V): 84 x 221 x 62 cm Primerno za: nakladalce na kolesih Oznaka CE: da Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Stanje Tip CE: CE Bobcat 193 cm rezkalnik, zelo malo uporabljen!!

Stanje: rabljeno, Leto izdelave: 2013, nosilnost: 2.500 kg, Pantograph ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical Condition: Poor Description: Year: 2013 ISO 3A (51 cm) to ISO 2A (41 cm) Capacity: 2,500 kg Opening range: 0–950 mm Width: 1,080 mm Ibsdpfx Aeudgazeh Djc ID: OS1357

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Deep beam, used Material color: black Overall length: approx. 1,111 mm Internal length: approx. 1,103 mm For frame depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Beam support width: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Isdswwuchopfx Ah Djbc General information about the item: This item is only available for pickup. If transport or shipping is required, it will incur additional costs, which can be provided upon request depending on the delivery location and scope of delivery.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder Ibedpfxewh Rp Ej Ah Djc - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Stroji za globoko vrtanje TBT T30-3-500 Isdpfxsxbtzhe Ah Dsbc

Stanje: dober (rabljeno), Included in delivery: 01x Deep shelf frame, used Material color: Sendzimir galvanized Total length: approx. 1,250 mm for rack depth: 1,200 mm clear support width: approx. 1,100 mm beam support: approx. 50 mm support bracket: L: approx. 80 x 80 mm total width: approx. 860 mm internal width: approx. 855 mm material thickness: approx. 3 mm Side frame: Length: approx. 1,245 – 1,070 mm front tapered Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height: approx. 195 mm Your contacts in our company: Mr. Andre Evering Ibjder Dr Suopfx Ah Doc Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This is a used item, so scratches, dents, and signs of wear may be present. This item is only offered for collection. Any additional transport or shipment of this item will incur extra costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Stanje: rabljeno, Stroj za globoko vrtanje SIG BEM8/0.25 Ibjdpfx Ajxbtzbjh Doc

Stanje: rabljeno, Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering here 100 used deep supports (Tiefenauflagen) from the manufacturer Nedcon for sale. These deep supports are also suitable for use with products from other manufacturers. Technical data for the deep supports: Racking system: Nedcon Type: NS Scope of delivery: 100x deep supports, used Material color: fully galvanized Isdpfxodqkf Is Ah Dsbc For upright depth: approx. 800 mm Overall length: approx. 800 mm Clear support width: approx. 710 mm C-profile dimensions: approx. 60 x 50 mm Beam support: approx. 40 mm Material thickness: approx. 2.0 mm Weight per piece: approx. 1.983 kg Our services at a glance: (Prices on request) - Assembly, installation Please observe our general assembly conditions. - Racking inspection Inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems. - Delivery with our own fleet (Offloading not included)