Deckel Maho Dmu 60 T nakup rabljenega (337)

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 64.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1505709006, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, največja hitrost vrtenja: 42.000 obr/min, število mest v zalogovniku orodij: 60, kot vrtenja osi B (max.): 180 °, Machine in good condition, measurement protocol available TECHNICAL DETAILS Travel X: 750 mm Travel Y: 600 mm Travel Z: 520 mm Table Clamping surface: Ø 700 × 500 mm Table load central/max.: 350 kg NC rotary swivel table: 700 × 500 mm B axis: 180° C axis: 360° Spindle Spindle speed: 42,000 rpm Tool holder: HSK E50 Spindle cooler: available Control CNC control: HEIDENHAIN iTNC 530 Electronic handwheel: available Prepared for 3D probe HEIDENHAIN TS 641: without probe BA: 4 Tool management Tool changer: 60 positions Speed Rapid traverse: 50 m/min MACHINE DETAILS Machine dimensions (L × W × H): 3,200 × 2,650 × 2,800 mm Machine weight: 9 t Total power requirement: 50 kVA Power supply: 400 V Operating times Power-on hours: 141,300 h Spindle hours: 64,500 h Control on-time: 146,100 h EQUIPMENT - 5-axis simultaneous HSC machining centre Lredjwrz Nwepfx Ab Tsi - NC rotary/swivel table with B and C axis - Chip conveyor available - Electronic handwheel for manual operation - Laser for tool measurement - Prepared for 3D probe HEIDENHAIN TS 641 - Integrated oil mist extraction - Spindle cooling available - No internal coolant supply (IKZ)

Stanje: dober (rabljeno), Leto izdelave: 2000, Hello, I am offering for sale a 5-axis CNC Milling Center DECKEL MAHO DMU 50 V evolution. The machine is connected and in operation. _ Type: 5-Axis Milling Center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Country of manufacture: Germany Year of manufacture: 2000 _ Machine Specifications: Ljdpfxstt Ntfo Ab Tsri – Number of axes: 5 – Table size (length x width): 500 x 380 mm – Max spindle speed: 18,000 rpm – Spindle power: 15 kW – X/Y/Z axis travel: 500/420/380 mm – C/B axis rotation: 180/360 degrees – Max feed rate: 20 m/min – Total power consumption: 40 kVa – Machine dimensions (L x W x H): 2800 x 2300 x 2600 mm – Total weight: 6000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Hello, I am offering for sale a Deckel Maho DMU 80T Machining Centre – 4-axis. Control system: Heidenhain Machine technical condition – excellent Year of manufacture: 2000 Country of manufacture: Germany Machine specifications: X-axis travel: 880 mm Y-axis travel: 650 mm Z-axis travel: 650 mm Automatic swivelling head Maximum spindle speed: 12,000 rpm Tool magazine: 24 positions (2x12 tools) Heidenhain linear scales on all axes Through-spindle coolant High-pressure cooling system Chip conveyor Centralised lubrication Lrsdpfsr Rp Tdsx Ab Tsi Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Documentation Loading included in the price

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), For sale: DECKEL MAHO DMU 100T Machining Centre Control: Heidenhain MillPlus Machine Condition: Very Good Year of Manufacture: 2000 Country of Manufacture: Germany Machine Specifications: X-Axis Travel: 1080 mm Y-Axis Travel: 710 mm Z-Axis Travel: 710 mm Swivelling head Maximum spindle speed: 12,000 rpm Tool magazine: 32 positions (2x16 tools) High-pressure cooling Through-spindle coolant Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Documentation Ljdpfslffzcex Ab Tori Machine weight: 10 tons Loading included in the price Stal-Com has been specialising for 17 years in the sale, servicing, and training for CNC machines from the DMG group. We specialise in all models of Gildemeister lathes and Deckel Maho machining centres. All machines undergo thorough technical inspections. Our machines are purchased not only by customers in Poland but also from all over Europe and parts of Asia. Each machine can be tested under production conditions, as we also operate as a machining subcontractor. After purchase, we provide operator training and can assist in setting up production of parts at the customer’s site. We work with many companies on a long-term partnership basis, supplying further machine tools as required. Stal-Com Rafał Dziendziel

Leto izdelave: 1996, stanje: dober (rabljeno), A used machining center from DECKEL MAHO equipped with: - MillPlus CNC control - Fixed angle table - Coolant system - Lighting - 25-position tool changer - Documentation Travel paths X/ Y/ Z: 800/ 650/ 550mm Spindle speed: 20–6300 rpm Tool holder: SK 40 For further technical data, please refer to the PDF document. Technical specifications and dimensions are subject to change/errors excepted. Lrodpfxehzt Tho Ab Tji

Stanje: rabljeno, Leto izdelave: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm Control system iTNC 530 Heidenhain Spindle speed range 20 – 18,000 rpm Main spindle drive power 35 / 25 kW Max. torque 130 / 87 Nm Tool holder HSK-A63 Clamping area of table 700 x 500 mm B-axis swivel range 0 – 180° C-axis swivel range 0.001° Lrjdpfxountmds Ab Tei Max. table load 350 kg Centering bore Ø30 H6 mm T-slots 7x 14H7 x 63 mm Table rotation speed 21.5 rpm Number of tool positions 32 Max. tool length 315 mm Max. tool diameter 105 mm Max. tool diameter with adjacent pockets empty 130 mm Max. tool weight 6.0 kg Rapid traverse (X / Y / Z) 50 / 50 / 50 m/min Feed rate 20,000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN Total power consumption 50 kVA Machine weight approx. 8.5 t Space requirement approx. 6.5 x 3.5 x 3.5 m 5-axis CNC machining centre DECKEL MAHO – DMU 70 eVolution - 5 axes - NC rotary-swivel table - Operating hours: Power on: approx. 62,500h / Spindle: approx. 15,100h

Stanje: dober (rabljeno), Leto izdelave: 2001, MACHINE SPECIFICATIONS Control System: HEIDENHAIN Machining Area: X-axis travel: 500 mm Y-axis travel: 420 mm Z-axis travel: 380 mm Main Drive: Spindle speed range: 20 – 18,000 rpm Power (40/100% duty cycle): 35/25 kW Torque (40/100% duty cycle): 130/87 Nm Feeds: Working feed (X/Y/Z): 20 – 20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work Table (B+C Axes): Table dimensions: Ø 500 x 380 mm Maximum table load: 200 kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360° (resolution 0.001°) B-axis travel: 180° (resolution 0.001°) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2,470 mm Machine weight: 5,020 kg Taper: Taper type: SK 40 (DIN 69871 A) Electrical Connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Lodpfxsxq Hb Ts Ab Tori Through-spindle coolant Automatic tool changer: ATC-32 - Max. tool weight / Max. tool diameter: 6 kg / 200 mm Chip conveyor Electronic handwheel: HR-410 High-capacity cooling system: Interlit SUK-200-900 Equipped with Renishaw probe interface: probe included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, število osi: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. As a universal machining center, it offers a robust construction and reliable performance for precision machining applications. Consider purchasing this DMG DECKEL MAHO DMC 60T universal machining center. Contact us for further details. Machine Advantages Technical Machine Features • Machine with NC rotary table and tool magazine for 60 tools: approx. 9,610 kg • Belt filter system 900 l: approx. 850 kg • Installation weight of the machine with maximum weight for workpiece, tools and operating fluids, including belt filter system: max. 11,500 kg • B-axis fully overhauled Lrodex Hbmfepfx Ab Toi Additional Information Machine still under power Control unit: Heidenhain MILL PLUS 2-way pallet changer. Through-spindle coolant (IKZ) with 12,000 rpm, 40 bar Mode 4 operation for working with the door open. Blum laser with tool measurement and tool breakage monitoring. Prepared for Blum 3D touch probe (probe not included). 900-liter coolant tank with belt filter

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 380 mm, pomik po osi Z: 380 mm, največja hitrost vrtenja: 18.000 obr/min, skupna masa: 4.000 kg, For sale is a 5-axis machining center from DMU, model 50 5. The machine comes from a vocational school, is in good condition, and has been very well maintained. The table was newly sealed in September 2025. Particularly noteworthy: the spindle has only 2,000 hours, 18,000 rpm, and the machine is equipped with an internal coolant supply system (IKZ). Technical data: Year of manufacture: 1996 Operating hours: 73,875 h Spindle replacement at 33,000 h Spindle hours: 2,000 h Spindle taper: SK 40 Control: Heidenhain Mill Plus Max. speed: 18,000 rpm Travel X/Y/Z: 500/380/380 mm Rotary table: 500 x 380 mm Dimensions (L/W/H): approx. 4,000/5,200/2,400 mm Weight: approx. 4,000 kg Delivery can be arranged Europe-wide for an additional charge, if required. Lrsdpfsry Tn Esx Ab Toi All prices are subject to VAT. Viewing possible by appointment. Contact us—our team will be happy to assist you! Trade-in or exchange possible. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell your own? For more information or further contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 760 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, hitrost pomika os X: 30.000 m/min, hitrost podajanja osi Y: 30.000 m/min, hitrost podajanja os Z: 30.000 m/min, skupna višina: 2.450 mm, skupna dolžina: 5.200 mm, skupna širina: 4.500 mm, širina mize: 500 mm, dolžina mize: 630 mm, obremenitev mize: 300 kg, skupna masa: 12.000 kg, 5-osni obdelovalni center DECKEL MAHO - DMC 60T MACH-ID 9443 Proizvajalec: DECKEL MAHO Tip: DMC 60T Krmiljenje: HeidenHain iTNC530 Leto izdelave: 2005 € 12.500,00 X-os: 760 mm Y-os: 560 mm Z-os: 560 mm A-os: 360000° B-os: od -30° do +120° Dolžina mize: 630 mm Širina mize: 500 mm Nosilnost mize: 300 kg Pomik X-os: 30.000 mm/min Pomik Y-os: 30.000 mm/min Lrodpfxjym R Tgo Ab Toi Pomik Z-os: 30.000 mm/min Vpenjalni sistem orodij: 40ISO/BT/MK Moč glavnega vretena: 26 kW Število obratov: 18.000 obr/min Menjalec orodij: 30 mest Notranje hlajenje (IKZ): 15 bar Število krmiljenih osi: 5 Odvajač ostružkov: Da Hladilni sistem: Da Dolžina: 5.200 mm Širina: 4.500 mm Višina: 2.450 mm Teža: 12.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Odlična priložnost za nakup tega 5-osnega CNC obdelovalnega centra z avtomatsko nakladalno celico. Lrodpfx Absyr N Rhj Tei Vključeno: - komplet vpenjalnih glav - visokotlačno hlajenje skozi vreteno - transportni trak za odrezke - papirnati pasovni filter - odsesovalna naprava za oljno meglo - programabilni curek hladilne tekočine - merilna tipala Heidenhain TS 641 - nadzor loma orodja BMO avtomatska nakladalna celica z Yaskawa Motoman robotom MH50 (instalirano leta 2014) Vključuje: - 40 palet, dimenzije 300 x 300 mm - 40 Gressel primežev - 4-stranski ničelni vpenjalni modul Schunk - krmilnik Yaskawa DX100 Pomiki osi: X – 500 mm Y – 420 mm Z – 380 mm Krmiljenje: Heidenhain TNC 530 Maks. hitrost vretena: 18.000 vrt/min Moč: 35 kW Menjalnik orodij: 60 orodij Nosilec orodja: SK40 Ta kombinacija stroja si je mogoče ogledati v delovanju po predhodnem dogovoru. Dobavljivost: april–maj 2026 Dodatne informacije na zahtevo. Opomba: Podatki na tej strani so bili pridobljeni po naših najboljših močeh in v dobri veri. Informacije so informativnega značaja, njihova točnost pa ni zagotovljena in ne predstavljajo zavezujoče ali pogodbeno določene lastnosti. Priporočamo, da vse pomembne podatke preverite ob ogledu stroja. Da bi kupcem prihranili nepotrebne potovalne stroške, priporočamo organizacijo ogleda preko video povezave.

Stanje: rabljeno, Leto izdelave: 2003, x-axis travel: 780 mm y-axis travel: 560 mm z-axis travel: 560 mm Tool holder: SK40 Control: HEIDENHAIN iTNC 530 Machine weight approx. 12.5 t Space requirement approx. 3.40 x 3.30 x 2.60 m DECKEL MAHO DMC 60T, Year of manufacture: 2003 Operating hours: 32,532.7 Working Area Traverse paths/ X axis: 780 mm Y axis: 560 mm Z axis: 560 mm The DMC 60T (1659) machine is in excellent condition and is ideal for precise milling operations thanks to its high-performance motor spindles, high feed rates, and flexible tool magazine. All technical details are provided below. Work Tables NC rotary table – clamping area, pallet: diameter 500 x 630 mm Centering hole: diameter 50^H6, 20 mm deep Locating hole: diameter 20^H6, 20 mm deep Table torque: - 100% duty cycle: 1,603 Nm - 25% duty cycle: 2,813 Nm Max. table rotation: 30 rpm Feed rate: 7,200 mm/min Permissible table load: 400 kg Tool Magazine with magazine SK 40 Feed Drive AC servo motors in digital technology for X, Y, Z axes Feed Speeds X, Y, Z axes steplessly programmable: 20–15,000 mm/min Rapid Traverse X, Y, Z axes: 50 m/min Setup Mode X, Y, Z axes: 20–2,000 mm/min Measuring System Resolution | X, Y, Z axes: 0.001 mm Input unit | X, Y, Z axes: 0.001 mm Position tolerance | X, Y, Z axes: 0.010 mm Main Drive 12,000 rpm: Motor spindle without gearbox 18,000 rpm: Motor spindle without gearbox Lodpjwm Rrwsfx Ab Tsri Speed Steplessly programmable: 20–24,000 rpm In setup mode: 20–800 rpm Weight Machine with tool changer and transport base: approx. 10,100 kg Installed weight Machine with fixed table and tool changer: max. 11,500 kg Total weight including band filter system: 12,400 kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system (900 l): 2.22 x 1.40 x 2.20 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, - RABLJEN - 5-OSNI VERTIKALNI OBDELOVALNI CENTER Z ROTACIJSKO IN NAGIBNO MIZO X-POT: 500 mm Lrodowl R Dqopfx Ab Tsi Y-POT: 400 mm Z-POT: 400 mm VRETENO: 9000 vrt/min; 13 kW; HSK 63 B-OS: -10° +95° C-OS: 360° DIMENZIJE MIZE: 700 x 500 mm NAJVEČJA DOVOLJENA OBREMENITEV: 200 kg MENJALNIK ORODIJ: VERIŽNI TIP; 16 POZICIJ KRMILNA ENOTA: HEIDENHAIN TEŽA: 3000 kg SKUPNE DIMENZIJE: 2000 x 1520 x 2140 mm DODATNA OPREMA: TRANSPORTER OSTRUŽKOV OPOMBA: ROČNA 5. OS

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC-530, število mest v zalogovniku orodij: 60, dolžina orodja: 315 mm, premer orodja: 160 mm, Oprema: transportni trak za ostružke, Deckel Maho DMC-60T – 5-Axis Vertical Machining Center The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining center, year of manufacture 2004, equipped with Heidenhain iTNC-530 CNC control. This machine is ideal for complex and high-speed machining operations thanks to its ISO 40-taper spindle, maximum speed of 18,000 rpm, and motor power of 19/28 kW (continuous/30 min). Main features: Axis travel: X = 780 mm, Y = 560 mm, Z = 560 mm Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum increment of 0.001° Table: 630 x 500 mm, maximum load capacity 500 kg Rapid traverse: up to 50,000 mm/min Lodjwt N Tyopfx Ab Tsri Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Additional equipment: Workpiece touch probe, chip conveyor, coolant tank with pumps, high-pressure through-spindle coolant system, spindle chiller, transformer, manuals and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, CNC rezkalni stroj Deckel Maho DMU 80 T Krmilnik Heidenhain TNC426 Število obratov: 20-6300 rpm Pomik x, y, z: 20-10000 mm/min Hitri pomik x, y, z: 15000 mm/min Delovno območje x 800mm, y 650mm, z 550mm Nosilec orodja: SK40 DIN 2079 Vpenjalni vijak DIN 69 872 Menjalnik orodij: 25 pozicij Največji premer orodja 160mm Največja izstopna dolžina od konice vretena 315mm Delovna miza: Dimenzije 1100x600mm T-utorji 9 x M14 Dovoljena teža 500kg Transportni podatki: Teža 5800kg Lrjdpfx Abex Tapfs Tsi Dimenzije (dolžina x širina x višina) 3,05 x 2,40 x 2,45m

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1143 000084 3, TECHNICAL DETAILS X-axis travel: 780 mm Y-axis travel: 560 mm Lredpfemiilbox Ab Toi Z-axis travel: 560 mm B-axis movement: +30° to -120° C-axis movement: 360° infinitely variable Control unit: Heidenhain iTNC 530 Spindle speed range: 0 - 12,000 rpm Tool holder: ISO SK 40

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: nepreverjeno, številka stroja/vozila: 323, potovalna razdalja osi X: 600 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, model krmilnika: SIEMENS SINUMERIK 840 D, skupna masa: 12.000 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Lrodpsyk Ulnofx Ab Tei Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 08.04.2026 in 16.04.2026! TEHNIČNI PODATKI Premik X-os: 600 mm Premik Y-os: 560 mm Premik Z-os: 560 mm Zasuk B-osi: 360° Dimenzije palet: 2 kosa, 500 x 400 mm PODROBNOSTI STROJA Krmiljenje: SIEMENS SINUMERIK 840 D Priključna moč: 60 kVA Obratovalna napetost: 400 V Frekvenca: 50 Hz Nazivni tok: 90 A Dimenzije & Teža Dimenzije (D x Š x V): 5.000 x 5.000 x 3.000 mm Teža: 12.000 kg Zunanja referenca: 25

Stanje: dober (rabljeno), Please read the technical specifications in full. If the machine is of investment interest to you, we kindly request your complete identification, including a correct telephone number and email address, in order to receive an offer. DECKEL Milling Machine / Tool Milling Machine DMU 35 M 3 x 2 Axes CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill Software Year of manufacture: 2001 and 2003 (2 units available) Travel paths X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: max. 55/80 Nm Universal tilting-/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rate: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotation range: 360 degrees Swivel range: degrees Lodoxz Rdaopfx Ab Tjri Total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct position measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox ranges - Full safety enclosure with sliding door - Swivelling control panel - Coolant nozzles on vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine lamp - Serial interface RS232C, LAN (RJ45) The machine is ideal for prototyping, toolmaking, training, mechanical workshops; gunsmiths, etc. It impresses with its versatility, thanks to the additionally manually operable rotary/tilting table which allows 5-sided machining. Condition: good to very good, from a vocational training center, see pictures. Can be tested under power.

Stanje: dober (rabljeno), Leto izdelave: 2004, Stroj je v dobrem delovnem stanju. Krmilna enota: Heidenhain TNC 530 Deli, prikazani ročno, niso priloženi. Ljdpfxsyufn Io Ab Teri

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 35.295 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, skupna višina: 3.200 mm, skupna širina: 5.400 mm, širina mize: 900 mm, dolžina mize: 700 mm, obremenitev mize: 1.400 kg, skupna masa: 13.000 kg, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 48, največja dolžina izdelka: 3.400 mm, kot vrtenja osi B (min.): −29 °, kot vrtenja osi B (max.): 180 °, kot vrtenja osi C (maks.): 360 °, število osi: 5, Tento 5-osý stroj DMG DECKEL MAHO DMU 80P duoBLOCK byl vyroben v roce 2009. Nabízí působivé pojezdy os: osa X 800 mm, osa Y 1050 mm a osa Z 850 mm. Stroj má robustní rozměr stolu Ø 900 × 700 mm a maximální kapacitu hmotnosti obrobku 1800 kg. Pokud hledáte vysoce kvalitní obráběcí možnosti, zvažte vertikální obráběcí centrum DMG DECKEL MAHO DMU 80P duoBLOCK, které nabízíme k prodeji. Pro další informace nás kontaktujte. • Otočné osy: osa B (naklápěcí hlava) -30° až +180°; osa C (otočný stůl) 360° plynule • Rozměr stolu: cca Ø 900 × 700 mm • Max. hmotnost obrobku: cca 1400-1800 kg Ledpsyvhfmjfx Ab Tori • Typ vřetena: Vertikální frézovací vřeteno • Chlazení přes vřeteno (CTS): ano • CE certifikace • Stav: Velmi dobrý provozní stav, kompletní servisní historie k dispozici Technická specifikace Upínací kužel SK 40 Chlazení skrz vřeteno Ano

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vrtenja: 4.500 obr/min, model krmilnika: Heidenhain TNC 310, TEHNIČNE PODROBNOSTI Pomik osi X: 500 mm Lrjdpfx Abjywgtxe Tsi Pomik osi Y: 400 mm Pomik osi Z: 400 mm Vpenjalo orodja: SK 40 Hitrosti vrtenja: 20-4500 obr/min PODROBNOSTI O STROJU Krmiljenje: Heidenhain TNC 310 Dimenzije & Teža Potrebni prostor: ca. 2,15 x 2,00 x 2,50 m Teža stroja: ca. 3 t OPREMA Zasukan nagibni vrtljivi stroj Dokumentacija

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, CNC vertikalni obdelovalni center DECKEL MAHO DMU 50 eVo linear z novim DMG dizajnom Z upravljanjem Heidenhain iTNC 530 Leto izdelave: 2010 Hodi: X 500 Y 450 Z 400 Območje vrtljajev: 0 – 18 000 min⁻¹ brezstopenjsko (SK 40) Ljdpsyn Nx Rsfx Ab Tori Z naslednjo opremo: 2-osna NC vrtljivo nagibna miza 500 mm x 380 mm Vertikalni menjalnik orodij s 120 mesti v magazinu Popolnoma zaščitena kabina z drsnimi vrati in notranjo osvetlitvijo Elektronsko ročno kolo Način obratovanja 3 IKZ 40 bar s papirnim tračnim filtrom Transporter za ostružke 3D merilna tipala BLUM merjenje orodij v delovnem prostoru 4-barvna signalna luč DMG avtomatizacija PH 150/8 16 palet z Allmatic + Lang vpenjalnimi primeži Sistem za hladilno sredstvo BEMA hladilna šoba 4 nastavljive strojne noge Navodila za uporabo

Stanje: rabljeno, Leto izdelave: 2003, DECKEL MAHO - DMU 125P HI-DYN - 2003 Ledpfx Absyulc Sj Teri - 3+2 osi - sistem Heidenhain TNC530 - pomiki X/Y/Z = 1250/880/800 mm - osi C in B - rotacijska miza 1250x1000 mm - nosilnost mize 2000 kg - obrati vretena 20-18000 min⁻¹ - motor vretena 28 kW - delovne ure vretena 29217 - teža 7500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 15.069 h, potovalna razdalja osi X: 500 mm, pomik osi Y: 420 mm, pomik po osi Z: 380 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, obremenitev mize: 200 kg, skupna masa: 4.500 kg, največja hitrost vretena: 10.000 obr/min, moč vretenovega motorja: 13.000 W, teža orodja: 6.000 g, Cette DMG DECKEL MAHO DMU 50 à 5 axes a été fabriquée en 2005. Elle est équipée d'une commande CNC HEIDENHAIN iTNC 530, offrant une plage de vitesse de broche de 20 à 10 000 tr/min et une capacité du magasin d’outils de 16 positions. La machine offre une charge maximale sur table d’env. 200 kg et des avances rapides de 24 à 30 m/min. Si vous recherchez des capacités d’usinage de haute qualité, le centre d’usinage vertical DMG DECKEL MAHO DMU 50 est à considérer. Contactez-nous pour plus de détails. • Surface de fixation de la table : env. 500 × 380 mm • Axe de basculement (B) : env. -10°/-5° à +110° Lrsdpfxoyifhbe Ab Toi • Axe rotatif (C) : 360° en continu • Capacité du magasin d’outils : 16 positions • Diamètre maxi des outils : env. 80 mm (130 mm avec emplacement adjacent libre) • Longueur maxi des outils : env. 300 mm • Avance rapide (X/Y/Z) : 24-30 m/min (selon configuration)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, proizvajalec krmilnikov: SIEMENS, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 35.000 W, število osi: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It offers a working area with an X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle with a maximum speed of 24,000 rpm and a tool magazine with a capacity of 120 positions. It features a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional Equipment • Coolant tank with paper filter, 600 l Lodjymcvmopfx Ab Tori • Touch probe • Chip conveyor • Electronic handwheel (remote control) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63