Deckel Fp 5 Nc nakup rabljenega (698)

Stanje: dober (rabljeno), Leto izdelave: 1986, 1 rabljeni univerzalni orodni rezkalni stroj Bedpfx Abswuu Sdjxslp Proizvajalec: Deckel Tip: FP 1 z aktivnim digitalnim prikazovalnikom Heidenhain Tehnični podatki: X-pomik: 300 mm Y-pomik: 160 mm Z-pomik: 340 mm Vpenjalni konus: SK 40 Velikost mize: 600x210 mm Hitrosti vretena: 40–2000 min⁻¹ Teža stroja pribl.: 1 t Prostorska zahteva pribl.: 1,6x1,3x1,8 m

Stanje: rabljeno, Universal Milling Machine DECKEL Type FP 1 Machine No. 52185 Year of manufacture: 1968 Travel range X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 steps Bjdpfx Aodzqb Sebxolp Motor power 1.0 and 1.4 kW, pole-switchable Power supply 380 Volt, 50 Hz - Powered feed on X and Z axes - Two motor speeds and 8 gear stages - Quill travel on vertical milling head 60 mm - Fixed angle table - Coolant system integrated in machine base - Separate control cabinet - Support bracket with counter bearing for horizontal milling SK 40 Required floor space (L x W x H): 1200 x 1100 x 1600 mm Weight approx. 1000 kg In very good condition

Stanje: dober (rabljeno), DECKEL - FP2 with New Three-Axis Digital Readout from Educational Facility - Well-maintained original condition Bjdpswtbq Dofx Abxelp - Travel X/Y/Z: 400x200x400mm - 3-axis digital readout "NEW" - Swivel table – clamping surface 700x350mm - Speed range: 40–2000 rpm - Automatic feeds on all three axes - Rapid traverse on all three axes - Tool holder: ISO 40 - Vertical and horizontal milling setup - Swiveling vertical head with quill - Coolant system - Spindle nut X-axis "NEW" - Machine feet - Machine vice "RÖHM" - Various tool holders - Chip pan / machine base - Documentation included Dimensions: LxWxH: 1.5 x 1.7 x 1.8 meters / Weight: 1500 kg Errors and omissions excepted.

Leto izdelave: 2019, Stanje: pripravljen za uporabo (rabljen), A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Bjdpjvf Iy Defx Abxslp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2102-2783, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 digital readout in very good condition. Technical specifications: * Year of manufacture: 1985, Machine No. 2102-2783 * Rotary/swivel tilting table * Spindle speed: 40 - 2000 rpm * Infinitely variable feed in 3 axes * Rapid traverse in 3 axes * Spindle brake * Travel X/Y/Z: 300/160/340 mm * Vertical milling head can be shifted 100 mm on spindle carrier * Vertical quill * Tool clamping system: SK40/S20x2 Bodpfxep Sqyuj Abxolp * Weight approx. 800 kg Accessories and equipment: * 3-axis digital readout Heidenhain TNC113 * Coolant system * Central lubrication * Operating manual, spare parts list The Deckel FP 1 Aktiv milling machine offered is in very good condition. All spindles move smoothly and have minimal backlash. All guides have been disassembled, checked, and are in as-new condition. The machine runs very quietly at all speeds. All bellows, scrapers, roller shutters, etc., are in very good or new condition, and an oil change has been performed. Mechanically and electrically fully inspected. You are warmly invited to view and test this machine and see for yourself the like-new condition.

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Blodpfxewwwr Ej Abxop Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Stanje: zelo dobro (rabljeno), Deckel FP 4 M v zelo dobrem stanju originalna barva, vodila in miren tek v najboljšem stanju 3-osni digitalni merilni sistem Heidenhain Pomiki: X 500 Y 400 Z 400 Obrati 50 - 2500 Podajalne hitrosti 8 - 630 + hitri pomik v vseh oseh Miza 460 x 800 Vrtalni vreteno SK 40 z M16 Teža cca 1500 kg Dodatki: 15 držal orodja SK 40, strojski primež z vrtljivo ploščo, vpenjalno območje 150 x 300 hladilna naprava, posoda za ostružke, vretena zavora, strojne noge, centralno mazanje, celotna dokumentacija. Stroj je seveda mogoče videti pod napetostjo Prosto naloženo, D - 88433 Schemmerhofen Bjdpfxewzlxuo Abxelp

Stanje: rabljeno, Universal tool milling machine DECKEL type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travels X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Bledpfxjiy Ekve Abxop Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 0.8 and 1.1 kW, pole-changing Power supply 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox steps - Feed on X and Z axes - Coolant system with mechanical pump integrated in the machine base - Quill travel on the vertical milling head 60 mm - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space required (L x W x H): 1100 x 900 x 1650 mm Weight: 650 kg In good condition

Stanje: dober (rabljeno), Orodjarski rezkalni stroj DECKEL FP 1 Bjdjw I Ty Sjpfx Abxjlp - Hodi X/Y/Z: 245x150x340 mm - Fiksna kotna miza: 600x210 mm - Vpenjalni stožec: MK 4 - Sprejem za napenjalne tule z vključenim kompletom napenjalnih tulcev - Območje vrtljajev: 95–1900 obr/min / 12 stopenj - Pomiki osi X in Z - Horizontalna/vertikalna rezkalna naprava - Pomik pinole navpične rezkalne glave cca 60 mm - Navpična rezkalna glava nagibna +/- 90° - Noge stroja - Razno orodje – glejte slike - Dokumentacija Dimenzije: D x Š x V: 1,1 x 0,9 x 1,7 m / Teža 650 kg Možne napake in spremembe podatkov.

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC-530, število mest v zalogovniku orodij: 60, dolžina orodja: 315 mm, premer orodja: 160 mm, Oprema: transportni trak za ostružke, Deckel Maho DMC-60T – 5-Axis Vertical Machining Center The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining center, year of manufacture 2004, equipped with Heidenhain iTNC-530 CNC control. This machine is ideal for complex and high-speed machining operations thanks to its ISO 40-taper spindle, maximum speed of 18,000 rpm, and motor power of 19/28 kW (continuous/30 min). Main features: Axis travel: X = 780 mm, Y = 560 mm, Z = 560 mm Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum increment of 0.001° Table: 630 x 500 mm, maximum load capacity 500 kg Bjdpfx Aswt N Tyjbxslp Rapid traverse: up to 50,000 mm/min Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Additional equipment: Workpiece touch probe, chip conveyor, coolant tank with pumps, high-pressure through-spindle coolant system, spindle chiller, transformer, manuals and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2102-2641, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 digital readout in very good condition, with original paintwork. Technical specifications: * Year of manufacture: 1985, Machine No. 2102-2641 * Swivel/tilt/rotary table * Spindle speed: 40 - 2000 rpm * Infinitely variable feed in 3 axes * Rapid traverse in 3 axes * Spindle brake Bljdpsf E Ilzsfx Abxjp * Travel X/Y/Z: 300/160/340 mm * Vertical milling head adjustable on spindle support by 100 mm * Vertical quill * Tool clamping system SK40/S20x2 * Weight: approx. 800 kg Accessories and equipment: * 3-axis digital display Heidenhain TNC113 * Coolant system * Operating manual, spare parts list The offered Deckel FP 1 Aktiv milling machine is in very good condition. All spindles move smoothly with minimal backlash. All guides have been inspected and are in very, very good condition. The machine runs smoothly at all speeds. All bellows, wipers, rollers, etc. are in excellent or new condition; oil change has been performed. Mechanically and electrically tested. You are warmly invited to inspect and test this machine and see its excellent condition for yourself.

Stanje: zelo dobro (rabljeno), Digital display Travel paths X/Y/Z: 400 x 200 x 400 mm Table size: 700 x 330 mm Tool holder: ISO 40 Hydraulic vice Completely overhauled in 2019 Bledpfjwn Td Eox Abxjp

Leto izdelave: 1978, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Make: DECKEL Model: FP 1 with infinitely variable feed Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty Bsdpsdf E H Asfx Abxslp Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 250 mm (T-slot: 12 mm) - Vertical milling head ISO 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual - used, as seen -

Stanje: rabljeno, Universal tool milling machine direct from liquidation Milling machine DECKEL Type FP 4 Machine No. 1 Year of manufacture: 1978 Travel range: X: 700 mm, Y: 400 mm, Z: 450 mm Table clamping surface: 860 x 500 mm Spindle taper: SK 40 - M16 Spindle speed: 31.5 - 1600 rpm, 18 steps Quill travel: horizontal and vertical Main spindle drive: 4 kW Power supply: 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN Blodpsv Srf Djfx Abxsp - Universal swiveling, tilting and rotary table - Coolant system integrated in the machine base - Machine vice - Supplied without tools Space requirements (L x W x H): 2100 x 1750 x 1900 mm Weight: approx. 3 tons.

Stanje: dober (rabljeno), Deckel FP1 Universal Milling Machine - Travel distances X/Y/Z: 245 x 150 x 340 mm - Supplied without vertical head / Machine was exclusively used for horizontal milling operations - Speed range: 95 – 1900 rpm - Built-in rotary table - Automatic feeds on X & Y axes - Various collets included - Documentation available Dimensions: L x W x H: 1.1 x 0.9 x 1.6 meters / Weight: 650 kg Bsdpfx Aswpruxsbxjlp Errors and omissions excepted.

Leto izdelave: 1976, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Manufacturer: DECKEL Model: FP 3 Year of manufacture: 1976 – overhauled, newly painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey blue Machine no.: 1601 Milling head type: 2027 Milling head number: 1483 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout Blodpfx Aod S Hztsbxsp FAGOR Innova 30i-M, new - Fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual actuation - Coolant device - Operating instructions -Used, as seen-

Stanje: rabljeno, Universal tool milling machine DECKEL Type FP 1 Mach. No. 33064 Year of manufacture: approx. 1960, overhauled in 2012 Travel paths X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.1 and 1.4 kW Power supply 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable and plug connection Required space L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Bljdpfx Asdzp T Eebxjp Good condition Machine was overhauled in 2012.

Stanje: dober (rabljeno), Orodjarska rezkalna naprava DECKEL FP 1 s 3-osnim aktivnim digitalnim prikazovalnikom TNC 113 iz izobraževalne ustanove - Hodi X/Y/Z 300x160x340 mm - Območje vrtljajev 40-2000 vrt/min - Brezstopenjski pomik v vseh treh oseh - Hitri pomik v vseh treh oseh - Navpična glava pomična za 100 mm - Navpična - vodoravna rezkalna naprava - Orodni vpenjalni sistem ISO 40 - Pogonska moč 1,5 / 1,9 kW - Tog kotni stroj - Posoda za ostružke - Hladilna naprava - Delovna svetilka - Dokumentacija Bledpfx Absw Rbxnjxep Dimenzije: D x Š x V 1,3x1,2x1,7 m / Teža 900 kg Možne so napake ali tipkarske napake

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Universal milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1987 – overhauled, newly painted, RAL 7035 light grey / RAL 7012 basalt grey Machine no.: 2102-3429 with warranty geometric inspection with test report Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 Bljdpfjhtrd Ijx Abxop - Coolant system - Centralized lubrication, electric - Operating manual - used, as seen -

Stanje: rabljeno, Universal Tool Milling Machine DECKEL Type FP 1 Machine No.: 34338 Year of manufacture: approx. 1965 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 200 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95-1900 rpm, 12 steps Bledjic R I Rspfx Abxop Horizontal spindle speed: 60-1200 rpm, 12 steps Motor power: 1.0 and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gearbox steps - Power feed on X and Z axes - Coolant device with mechanical pump in machine base - Quill stroke on vertical milling head: 60 mm - Swivelling, rotating and tilting angle table - Separate control cabinet Required space L x W x H: 1000 x 900 x 1750 mm Weight: 690 kg Good condition

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 LV Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery date, covering the mechanics overhauled by us. Electrical and electronic components are excluded, as they have only undergone a functional test. For machines located outside our North Bavarian sales territory, travel expenses are to be borne by the customer. Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbolt thread M 16 - Central lubrication, manual - Coolant system - Operating instructions Bledpfx Aotdnb Eebxjp Used, sold as seen. The machine is technically in accordance with the standard from the year of manufacture.

Leto izdelave: 1982, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Bsdpfx Abspn Rgvexolp Brand: DECKEL Model: FP 3 Aktiv Year of manufacture: 1982 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M16 - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The machine corresponds technically to the standard of its year of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Bjdjmhfrrepfx Abxslp Year of manufacture: 1976 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months single-shift from delivery on the mechanical components overhauled by us. Electrical and electronic components are excluded, as these have only undergone a functional test. For machines located outside our Northern Bavaria sales region, travel expenses are to be borne by the customer. Geometric acceptance test with test protocol included. Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, sold as seen The machine corresponds technically to the state of the art at the time of manufacture.

Leto izdelave: 1976, Stanje: delavnici obnovljeno (rabljeno), Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop-inspected Machine no.: 53426/08 Geometric inspection with test report Accessories: - 3-axis digital readout Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system Bljdpfxeflc N As Abxjp - Steady rest with counter bearing - Operating manual - used, as seen, however without any warranty -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Machine no.: 2102-2520 Blodpfx Ajhtq Edsbxsp with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual - Used, as inspected -