Chiron Fz 22 nakup rabljenega (99)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 800 mm, pomik osi Y: 530 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-B5, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.000 W, teža orodja: 8.000 g, število osi: 5, This 5-axis CHIRON FZ18W was manufactured in 2019 and features a FANUC 31i-B5 control with continuous 5-axis operation. The machine offers a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. With its automatic pallet changer and two rotary tables, it is ideal for complex machining applications. If you are looking for a high-quality milling machine, consider the CHIRON FZ18W we have for sale. Please contact us for further information. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: Kwsdpjyaz Emsfx Abbet • AC spindle motor: 7.5 kW (100% duty cycle), 22.0 kW (10% duty cycle) • Maximum torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm • Tapping capacity: M30 • Milling capacity: 500 cm³/min (steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max. tool diameter: 78 mm (160 mm with empty adjacent pockets) • Max. tool length: 380 mm • Max. magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 - 1.2 - 1.4 g • Drives: Digital direct drives with absolute measuring system • Machine features/auxiliary equipment: • Automatic flushing of work area and fixtures • Automatic centralized grease lubrication • Hydraulic unit: 200 bar • Compressed air conditioning with filtration to 0.01 µm • Cooling unit for machine components • Measurement, monitoring, software: • FANUC 3D collision check • Tool monitoring and sister tool management • Electrical & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robotics, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (changeover time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max. clamping torque: 1,200 Nm • Max. load per side (APC): 250 kg • Max. weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (prepared) • High-pressure coolant system up to 30 bar • Coolant filtration: drum filter TPF 350 S (50 µm) • Chip conveyor: hinged belt design • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q probe (prepared) • Laser tool breakage control (Single F1000)

Leto izdelave: 2000, Stanje: rabljeno, Serial number 143-86 X-travel 550 mm y-travel 300 mm z-travel 425 mm Operating hours 58,046 h Internal cooling no Max. spindle speed 10,500 rpm 4th axis no Control Siemens Sinumerik 810D Kjdpfor D Tu Dox Abbowt Weight 4,600 kg

Stanje: rabljeno, Leto izdelave: 1995, x-travel 2000 mm y-travel 425 mm Ksdor D Tu Iepfx Abbewt z-travel 425 mm Operating hours cannot be read h Coolant system yes Max. spindle speed 10,500 rpm 4th axis yes Control Siemens Sinumerik 810 Weight 6700 kg

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1999, obratovalne ure: 20.151 h, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 490-43, potovalna razdalja osi X: 750 mm, pomik osi Y: 400 mm, pomik po osi Z: 425 mm, širina mize: 460 mm, dolžina mize: 1.150 mm, skupna masa: 5.500 kg, hitrost vretena (min.): 7.200 obr/min, število mest v zalogovniku orodij: 20, Hidravlika povzroča težave in zato stroj ni več uporaben. Stroj je opremljen z upravljanjem Siemens Sinumerik 840 M in nosilcem orodja SK 40. Ležišče stroja iz mineralnega odlitka zagotavlja visoko toplotno stabilnost in dušenje vibracij. Morda primerno za razgradnjo. Kwsdpfsx Rdyijx Abbjt

Stanje: rabljeno, Chiron FZ18W Magnum Rotary Pallet Year: 1999 CNC Siemens 840D X 630 / Y 400 / Z 425 mm travel Tables (2) 850 x 450 mm 20 tool magazine ISO 40 / 18 kW / 140 Nm Rapid traverse: 40 m/min HAWE hydraulics Kwedpshkkwbofx Abbet Automatic doors Chip conveyor Weight: 6 tons Dimensions: 3.6 x 2.25 x 2.85 m The machine can be inspected under power at our warehouse Mimu Machine Tools (Italy)

Stanje: rabljeno, Vertical machining center CHIRON FZ08KW 2 pallets Kodpfx Absumma Iobswt 15,000 RPM HSK40A CNC Fanuc 21iM The machine is located in our warehouse in Gussago, BS. Mimu Machine Tools, Gussago, BS, Italy. The machining center is a machine tool equipped with numerical control that can perform several mechanical operations on multiple surfaces of the same workpiece with a single setup. It is generally equipped with multiple movement axes, an automatic tool changer system, and sometimes several pallets.

Stanje: rabljeno, Vertical machining center CHIRON FZ08W, 2 pallets, 12 HSK32 tools, spindle 15,000 rpm, HSK-32. Rotary pallet changer (2 pallets, pallet changer), CNC controller: Fanuc 21iM, chip conveyor. The machine is located in our warehouse in Gussago (BS), Italy. Mimu Machine Tools Kwsdpjlaga Esfx Abbjt Gussago, BS, Italy The machining center is a machine tool equipped with numerical control, capable of performing multiple machining operations in a single setup on several surfaces of the same workpiece. It is generally equipped with multiple axes of movement and an automatic tool change system, and in some cases with multiple pallet changers. CNC Type: Fanuc 21iM 2 Pallets: Yes Number of pallets: 2 Spindle speed: 15,000 rpm

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 60 m/min, proizvajalec krmilnikov: Fanuc, model krmilnika: 21m 3x / 2x 21iM, premer obdelovanca (maks.): 63 mm, teža obdelovanca (maks.): 1 kg, največja hitrost vrtenja: 10.000 obr/min, dovod hladilne tekočine: 1 letvica, število vreten: 1, število mest v zalogovniku orodij: 12, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 7 kosov CHIRON FZ08S s 4. osjo Peiseler AWU P100 Kwjdpfx Abovx Ugwobst 3 stroje so bili obnovljeni pri Chiron CMS leta 2016, 4 stroji pa leta 2018, cena na kos cca 30.000 €.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 28.635 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 251-78, potovalna razdalja osi X: 550 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, proizvajalec krmilnikov: Heidenhain, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DATA Kwsdpfx Abewaai Sjbet Control: Heidenhain Travel X / Y / Z: 550 / 400 / 400 mm Spindle and Axes Spindle speed: max. 15,000 rpm Tool holder: HSK 50 Tool magazine: 48 stations Table: Swivel table MACHINE DETAILS Operating time: 51,192 h Spindle running time: 28,635 h Control operating time: 49,427 h Weight: 6,500 kg Electrical Specifications Operating voltage: 400 V Control voltage: 230/24 V Power: max. 41 kVA Rated current: 59 A Protection: 63 A Frequency: 50/60 Hz EQUIPMENT - Handte oil mist extractor - Tool package - Heidenhain 3D probe - Workpiece measurement IR probe - Rotary table - Documentation - Data backup

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: nefunkcionalno, Prodajajo se naslednji deli iz stroja Chiron FZ 12 SM, letnik 1997: Kwjdpfexdhp Esx Abbjt 9 kosov nosilcev za orodje 1 kos vreteno 1 kos motorja vretena

Leto izdelave: 1998, Stanje: dober (rabljeno),

Stanje: rabljeno, Leto izdelave: 2001, x-travel 300 mm Kwodpfxjwth Sbo Abbot y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB Max. spindle speed 15,000 rpm Tool holder HSK-A 32 Number of tool stations 12 positions According to our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, pictured tools and clamping devices are only included in the scope of delivery if explicitly stated in the additional information. Technical specifications and details subject to change and error. Prior sale reserved!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 550 mm, skupna masa: 9.600 kg, največja hitrost vretena: 6.000 obr/min, Cette fraiseuse 3 axes CHIRON Mill 2000 a été fabriquée en 2006. Elle offre une grande course de travail avec X 2000 mm, Y 500 mm et Z 550 mm, une vitesse de broche de 6 000 tr/min et une commande Siemens. La machine est équipée d’un magasin d’outils de 40 positions, d’une tête pivotante CN et d’un convoyeur à copeaux avec système de haute pression. Profitez de l’occasion pour acquérir ce centre d’usinage vertical CHIRON Mill 2000. Contactez-nous pour plus d’informations sur cette machine. Équipements supplémentaires • Convoyeur à copeaux et système de refroidissement Ksdpfx Abeyaagpsbswt • Convoyeur à copeaux avec système haute pression Avantages de la machine Avantages techniques • Magasin d’outils : 40 positions (magasin à chaîne) • Tête pivotante CN Informations complémentaires Équipements optionnels Deux extracteurs neufs Système de bridage à point zéro

Stanje: rabljeno, Leto izdelave: 2014, x-pomik 2000 mm y-pomik 630 mm z-pomik 550 mm Krmilnik Siemens 840 D Skupna potrebna moč 7,5 - 22,5 kW Teža stroja pribl. 10,5 t Največja obremenitev mize: 1.000 kg / m dolžine mize Območje gibanja: X-os: 2000 mm Y-os: 630 mm Kwjdoyan Rcopfx Abbjt Z-os: 550 mm Območje vrtljajev do: 12.000 min-1 Maksimalni navor: 140 Nm Vrtalna zmogljivost: povprečno 42 mm (s spiralnimi ploščicami) Rezkalna zmogljivost: 600 cm³/min Število mest za orodja: 24 Vpenjanje orodja: HSK A 63 DIN 69893 Premer orodja: maks. 75 mm Premer orodja z: prostimi sosednjimi mesti: maks. 160 mm Dolžina orodja: maks. 320 mm Teža orodja: maks. 8 kg (maks. obremenitev magazina 100 kg) Čas menjave orodja: pribl. 1,5 s (odvisno od krmilnika)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 29.688 h, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D-SL, skupna višina: 1.350 mm, skupna masa: 110 kg, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 60.000 W, število osi: 4, This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It is equipped with a single spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers an X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse rates of 75 m/min. Take advantage of this opportunity and purchase this CHIRON Mill 2000 High Dynamics vertical machining center. Contact us for further information about this machine. Additional Equipment • Rated pressure: 200 bar • Test pressure: 260 bar • Temperature range: -10 to 120 °C • Bypass opening pressure: 7 bar • Differential pressure indicator: 5 bar • Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V • Maximum switching current: 1 A • Switching capacity: 70 W • Protection class: IP 65 • Weight: 37 kg • Lubrication: Oil-air • Maximum oil tank temperature for hydraulic fluid: 55°C Machine Benefits Technical Advantages of the Machine • Main spindle max. torque: 75 Nm • Spindle head version: single spindle Additional Information No swiveling spindle head. Cooling device for control unit: Dimensions: 400 mm (W) x 950 mm (H) x 260 mm (D) Set flow rate: 40 l/min; Outlet pressure at 50 Hz: 4.0 bar; Rated power: 1.5 kW; Max rated current: 4.1 A Unit: Dimensions: 600 mm (L) x 600 mm (W) x 1350 mm (H); Weight: 110 kg; Rated connected load: 4.60 kW; Max rated current: 9.20 A; Maximum fuse protection: 16 A Ksdpfxsx D Dr Ao Abbswt Table rotary table: Transport load without counter bearing: 300 kg; Max. axial load: 9000 N; Max. radial load: 40000 N; Max. tilting moment: 2000 Nm; Max. transferable torque from worm to worm gearbox: 30 Nm Counter bearing: Transport load for vertical use with NC rotary table 1.03: 600 kg; Required clamping pressure of the hydraulic fixture (rated pressure): 75 bar; Permissible clamping pressure of the hydraulic clamp: 85 bar; Permissible peak pressure of the hydraulic clamp: 120 bar; Permissible tangential moment with hydraulic clamp: 1000 Nm Dimensions Machine depth: 600 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 4, Krmilna enota Znamka: SIEMENS Model: 840D Glavni pogon Kjdex D Nmxspfx Abbswt Vpenjalni stožec orodja: HSK-A 63 Število osi: 4 Ta 4-osni vertikalni obdelovalni center CHIRON DZ 18 W je bil izdelan leta 2021. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra CHIRON DZ 18 W. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: rabljeno, Leto izdelave: 2007, Immediately available ex-stock: CNC Vertical Machining Center CHIRON Model: Mill 2000 Highspeed Year of manufacture: 2007 Control: Siemens Sinumerik 840 D Clamping area: 2600 x 550 mm Travel X/Y/Z: 2000/500/550 mm Reinforced spindle drive: 47.2 kW, 17 kW at 100% duty cycle Spindle speeds: 20 – 12,000 rpm Spindle taper: SK 40 2 x 4th axis with horizontal rotary table Tool changer: 40 positions (instead of 24) Drilling capacity: 45 mm, tapping M 33, milling capacity 700 cm³/min Clamping table lowered by 100 mm IKZ (internal coolant supply) Coolant unit HL 450/900 Chip conveyor Rotary table package with horizontal rotary table fully assembled NC rotary table, 280 mm diameter Kedpfx Aboycb Itjbjwt Remote diagnostics and teleservice Portable mini handwheel High-Speed package, rapid traverse all axes 60 m/min 2 x extraction units as air purifiers Probe for automatic measurement in the machine Renishaw probing package OMP 40 Stainless steel bellows on X-axis Central partition wall Numerous tools and tool holders Weight: 13.5 t For the price of EUR 17,500.—plus VAT, ex location

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: n/a, število osi: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004 and features a high-speed motor spindle with 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It is equipped with a 5-axis milling package, 92 tool stations, and a Marposs collision monitoring system. Ideally suited for machining long parts up to 6,000 mm and pendulum machining. If you are looking for a high-quality milling machine, you should consider the CHIRON Mill 6000 SK we have for sale. Contact us for further information. Machine advantages Technical machine advantages • 92 tool positions HSK-A63 (background magazine) • Long-part machining up to a maximum of 6,000 mm • Face machining (5th side) horizontally with swivel head (right/left) • Pendulum machining with central divider, max. workpiece length 1,773 mm with face machining on both ends (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum field, positioning and clamping via linear system (hydraulic release, mechanical clamping) Additional Information Additional Equipment High-speed package with motor spindle: 12,000 rpm, 140 Nm Production package: Scraper belt conveyor, discharge height 1,050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with high-pressure pump and control valve Rinsing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m³/h Rotatable viewing window left and right (1,400 mm from machine center) Automatic loading doors Central divider for pendulum machining 5-axis milling package Air blow-off Tool life monitoring Additional V24 RS232 in the control cabinet Kwsdpfxex Nr Irj Abbot BDE/MDE interface (statuses: machine on, machine running, parts counter) Marposs (Brankamp) CMS100 collision monitoring system 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 hydraulic vices KOHN Multi 2000 MFS 125/680 HD Two-part operator stand across the entire working width of 6,000 mm With the 3 axes x, y, z and the swivel head, forms such as curves can be milled with the 5-axis milling software package. The software then synchronizes the axes.

Stanje: dober (rabljeno), Leto izdelave: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and has a tool magazine. CRT display, classic keyboard with physical buttons 3. Electrical Specifications (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not readable, but standard Fanuc is 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine Construction Vertical CNC machining centre (milling machine) with a closed enclosure. Worktable with a hole grid for fixing components. Carousel tool magazine (visible in the photo) – typically 12, 20, or 24 tools (depending on the version). Automatic Tool Changer (ATC). Z axis operates vertically (visible guideway assembly and bellows type way covers). 5. Typical Technical Data (for Chiron FZ 12/15 machines from this period) (values may vary depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500–700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load capacity: 200–300 kg Spindle speed: 20–6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5–15 kW (depending on version) Tool magazine: 12–24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Applications Metal machining (steel, aluminium, cast iron, light alloys). 📌 General Data: • Manufacturer: CHIRON, Germany • Type: CNC machining centre • Control: visible in photo (Fanuc Series 0-M) • Automatic tool changer • Robust worktable with clamping options • Stable, industrial design 📌 Condition: • Used machine, in good condition • Regularly serviced • Normal signs of use visible • Fully functional 📌 Applications: • Precision milling Ksdpfew Uab Aox Abbewt • Machining metal components • Single-part and series production

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.674 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 309-03, nazivna (navidezna) moč: 10 kVA, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik, skupna masa: 12.200 kg, število vreten: 1, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Odsesavanje z mokrim ločevalnikom (Handte) Mg-izvedba z Minimax gasilno napravo HSK 63 Kedpex Hal Hefx Abbowt Velik magazin za orodje Zadnje vzdrževanje: poletje 2024

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 28.197 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 309-38, nazivna (navidezna) moč: 10 kVA, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik, skupna masa: 12.200 kg, število vreten: 1, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Odsesavanje z mokrim separatorjem (Handte) Izvedba za magnezij z gasilno napravo Minimax HSK 63 Kwsdpfjx Hakisx Abbot Zadnje vzdrževanje: poletje 2025

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 630 mm, pomik osi Y: 530 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D solution line, število osi: 3, Krmilna enota Blagovna znamka: SIEMENS Model: 840D solution line Glavni pogon Vpenjalni stožec orodja: HSK-A 63 Kwsdsx D Nmfspfx Abbst Število osi: 3 Pomiki Pomik osi X: 630 mm Pomik osi Y: 530 mm Pomik osi Z: 450 mm Dodatna oprema IZBIRNO: robot, celica vključno s transportnimi trakovi, PLC, obračalna postaja Ta 4-osni CHIRON DZ18W je bil izdelan leta 2018. Idealen je za natančno vertikalno obdelavo, model pa nudi robustno konstrukcijo in zanesljivo delovanje. Razmislite o nakupu tega vertikalnega obdelovalnega centra CHIRON DZ18W. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Krmilna enota Znamka: FANUC Model: 18i MB5 Premiki Pomik po osi X: 800 mm Pomik po osi Y: 500 mm Pomik po osi Z: 550 mm Kwjdpfx Aox D Enrjbbet Dodatna oprema Približno 20 vpenjalnih glav vključenih Kratek podajalnik palic Knoll papirni tračni transporter za odvod ostružkov HL450/900 Ta 5-osni obdelovalni center CHIRON Mill 800 je bil izdelan leta 2007. Opremljen je z zasučno glavo, podajalnikom palic, notranjim hlajenjem in papirnim tračnim transporterjem ostružkov Knoll. Stroj vključuje krmilnik Fanuc 310i-model A5 in vpenjalni sistem HSK-a-63 ter približno 20 vpenjalnih glav. Izkoristite priložnost za nakup tega CHIRON Mill 800 obdelovalnega centra. Kontaktirajte nas za več informacij o stroju. Uporaba Rezkanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 21.578 h, Glavni pogon Število osi: 4 Kwsdpfx Ajx D Nmrobbjt Ta 4-osni CHIRON DZ15KWM HS je bil izdelan leta 2011. Idealen je za precizno vertikalno obdelavo, saj ta model zagotavlja robustno konstrukcijo in zanesljivo delovanje. Če iščete visoko kakovostne zmogljivosti rezkanja, razmislite o stroju CHIRON DZ15KWM HS, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Uporabnost Rezkanje

Stanje: rabljeno, Leto izdelave: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm Control: Siemens 840D Main spindle speed range: 12,000 rpm Main spindle drive power: 22.5 kW Max. torque: 140 Nm Number of tools: 24 pcs Max. tool length: 320 mm Spindle taper: HSK 63 Operating hours: approx. 56,000 h Spindle hours: approx. 17,500 h Machine weight: approx. 9.7 t This machine can be inspected under power by appointment and, in our assessment, is in very good condition. Equipment: - Internal coolant supply (IKZ) - Chip conveyor - Glass scales on all axes - Automatic door Ksdpex I Sh Ajfx Abbewt - Swivel axis with counter bearing, manufacturer Fibro Four identical machines are available. The machines were used for light milling and drilling operations. Subject to change and errors in technical specifications and information, as well as prior sale!