Cevni Paket nakup rabljenega (1.047)

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Primary Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Package 22 Serial Number: 1003457 Year of Manufacture: 2020 Condition: Like new / unused CE Mark: CE 0036 TECHNICAL DATA Product type: Primary Precipitation Vessel / Process Vessel Nominal volume: 1,500 liters Total volume: 1,785 liters Empty weight: approx. 866 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: Stainless steel Operating pressure vessel: -1 / +3 bar Test pressure vessel: 5.4 bar Operating pressure jacket: as per design Temperature range: -10 °C to +150 °C Fpodpfoykn Iisx Anfsg Pressure vessel in accordance with PED 2014/68/EU Module G – Individual inspection Inspected by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel was fully tested at the BRINOX factory as part of a documented FAT. Tests performed included: • Delta ferrite test of weld seams (compliant, no deviations) • Surface roughness test (Ra internal ≤ 0.8 µm, compliant) • Visual inspection of all product-contact surfaces • Pressure testing as specified • Documentation verification • GMP deviation management (non-critical points, fully closed) • Measuring equipment with valid calibration certificate EXECUTION • Double jacket for heating/cooling • Horizontal orientation • High-quality pharmaceutical design • All product-contact areas in stainless steel 316L • Mirror-polished internal surface • GMP-compliant, documented welds • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Instrumentation prepared (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flange bottom • Lifting lugs and transport configuration • Project build for CSL Behring (Project SPHINX) CONDITION • Never used in production • Direct from project surplus • Internally absolutely as new • No corrosion • No signs of wear • Industrial mint condition • Immediately available DOCUMENTATION Complete project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection documents • PED Module-G documentation • Material certificates 3.1 • Welding documentation (WPS/WPQR) • Delta ferrite test reports • Roughness measurement logs • Calibration certificates for measuring devices • GMP deviation reports • Fully signed FAT protocols • Operating and maintenance documentation Documentation is complete and well-structured. • Pharmaceutical active ingredient processes • Precipitation and reaction processes • Buffer and solution preparation • Sterile liquid processing • Biotechnology • GMP-compliant production facilities • High-purity media SPECIAL FEATURE This is a premium BRINOX process vessel manufactured for CSL Behring in genuine pharmaceutical project quality, with full PED Module-G individual inspection, documented FAT 2020 and complete GMP documentation. Not a standard tank – but certified project quality for sterile applications. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 30.000 l, Oprema: dokumentacija / priročnik, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – Incl. Saddle Support – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial Number: 1003464 Year of Manufacture: 2020 Condition: As new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / Solution Tank / Pharmaceutical Process Vessel Working Volume: 30,000 liters Total Volume: 33,213 liters Product-contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated, and cleaned Surface roughness: Ra < 1.6 µm Standards and Guidelines: • PED 2014/68/EU compliant • CE marking present • GMP-compliant pharmaceutical design Pressure Data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20 °C to +50 °C Hydrostatic pressure test performed. FAT – Factory Acceptance Test A fully documented FAT carried out, including: • Dimensional, visual and identification check • Weld inspection and NDT • Pressure test according to PED • Testing of all nozzles/connections • Documentation and quality inspection FAT fully passed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Internal surface pickled and passivated • Hygienic, GMP-compliant construction Connections, incl.: • Manway DN500 • Inlet DN100 Fpsdpfx Anjykngfefeg • Outlet DN50 • Measurement, safety and process connections Mechanical design: • Original BRINOX stainless steel saddle support included • Heavy-duty construction • Lifting points for crane handling available CONDITION • Absolutely new condition • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle support also in new condition and part of scope of delivery. DOCUMENTATION – fully available (GMP-compliant) Comprehensive manufacturer and project documentation incl.: • EU Declaration of Conformity and CE documentation • PED documents • Material certificates EN 10204 – 3.1 • Welding documentation (WPS / WPQR, welder lists) • NDT test reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Partial drawings and parts lists • Operating and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging available • Original industrial packaging • Crane handling possible without issue • Worldwide shipping possible SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new build project, with complete FAT, PED compliance and GMP documentation. Large-volume BRINOX 30,000 L pharmaceutical process vessel in new plant quality incl. saddle support – immediately available

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 9.000 l, Oprema: dokumentacija / priročnik, BRINOX 9000 L GMP Washing and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical production facility. Suitable for the production, storage, and supply of process solutions in GMP-regulated environments. Construction and Equipment Cylindrical stainless steel tank in horizontal design End-face process connections Large manway with pressure closure Integrated CIP system with spray ball High-gloss polished internal surface Hygienic, product-contacting connections Multiple measuring and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel feet included in delivery Condition Very good optical and technical condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and auxiliary components are present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Welding Documentation Inspection”, the welding documentation was inspected as part of factory acceptance testing (FAT 01, 23.10.2020). The following were confirmed, among others: Identification of welders and weld seam inspectors Welder qualifications per EN ISO 9606-1 WPS and WPQR documentation Proof of shielding gas suitability Fpjdpfx Anoykkk Hofjg Documented test welds Spot sample visual inspection without defects Traceability according to material certificates 3.1 The complete welding documentation is included in the Turn-Over-Package. Documentation – Fully Available FAT plan and FAT report Layout and construction drawings P&ID diagrams Calibration protocols Surface and roughness tests Leak test Welding plan WPQR WPS Welder qualifications Borescopy report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital format. Special Features Fully documented GMP version with certified welding documentation and comprehensive quality package. Very well suited for reinstallation in pharmaceutical production plants or validation-required applications.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 9.000 l, Oprema: dokumentacija / priročnik, BRINOX 9,000 L Washing Solution Tank – 316L – Double Jacket – TÜV / PED – As-new Condition Manufacturer: BRINOX d.o.o. Tag-No.: BH6751-BH1001 Package 31 Year of manufacture: 2020 Condition: As-new / unused Technical Data Product type: Washing solution tank Nominal volume: approx. 9,000 litres Product-contact material: 1.4404 (AISI 316L) Design: horizontal construction CE marking: present Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Double jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polished • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Heavy-duty custom fabrication in stainless steel 316L • Large-dimension manhole with pressure-resistant closure • Integrated CIP spray lances / cleaning pipes • Multiple clamp and flange fittings • Instrumentation ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy, industrial-grade construction • External pipe runs and process connections pre-installed • Excellent accessibility for maintenance and inspection The photos clearly show the high manufacturing quality, clean welds, and mirror-polished, product-contact interior surface. Condition • Never used in production • Stock item from project surplus • Interior absolutely clean • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Washing solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production facilities • Sterile liquid processes Documentation – complete and well-structured Fpodpfx Anjykkivsfog A comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU declaration of conformity and warranty certificates • Reports and EU component verifications • Assembly documentation • Part drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welders’ qualification lists, welding procedure certifications, work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gas • Manufacturer’s qualification certificate • Nondestructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Pressure test record • Dimensional accuracy check • Surface roughness protocol • Surface treatment report • Operating and maintenance manuals (device) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation folder available digitally. Special Feature This is not a standard tank, but a high-quality custom project fabrication built to true pharmaceutical standards with certified pressure design, documented manufacturing, and full PED conformity including TÜV approval. Heavy-duty construction, generously sized connections, and CIP integration make this tank ideal for demanding GMP applications.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.200 l, Oprema: dokumentacija / priročnik, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag-No.: BH6762-BH1001 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: ELUTION / Solution Tank Capacity: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: Present (CE 0036) Tank pressure: Operating pressure: -1 / +3 bar Test pressure: According to TÜV approval Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: According to TÜV approval Temperature range: -20 °C to +150 °C Pressure vessel according to PED 2014/68/EU Module G – Individual inspection Acceptance by notified body (ID number 0036) FAT – Factory Acceptance Test The tank was inspected as part of a documented FAT process. The tests included, among others: • Welding documentation inspection • Visual inspection of weld seams • Leak test • Pressure test • Surface roughness test • Sensor calibration test • Layout and dimensional inspection • Documentation review Complete FAT report including all test protocols available. SPECIFICATION • Double jacket for heating/cooling • Completely made of stainless steel 316L • Mirror-polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manholes/revision openings • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensor technology) • Heavy-duty project configuration • Lifting lugs for crane handling CONDITION • Never used in production • Stock item from project surplus • Interior absolutely clean • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION – complete and well-structured Comprehensive, project-specific quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and Warranty Certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Material certificates (3.1) • Welders’ lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (NDT) • Analysis certificates for welding filler metal and shielding gas • Surface roughness protocol • Surface treatment report Fpodpfx Aeykkhronfeg • Dimensional accuracy inspection • Internal pressure test • Calibration certificates • Assembly documentation • Part drawings • Operating and maintenance manuals Complete documentation folder available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media SPECIAL FEATURE This is not a standard tank, but a premium BRINOX project-built unit in genuine pharmaceutical quality with certified pressure design, full PED conformity (Module G), documented FAT inspection, and extensive quality documentation. Project-quality for sterile applications – immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.200 l, Oprema: dokumentacija / priročnik, BRINOX 3,200 L Solution Vessel – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Fpodpfeykkbxox Anfog Condition: As new / unused Technical Data Product Type: ELUTION / Solution Vessel Volume: 3,200 litres Empty Weight: 1,815 kg Material: 1.4404 (AISI 316L) CE Marking: CE 0036 Vessel Pressure Operating Pressure: -1 / +3 bar Test Pressure: 4.6 bar Jacket Pressure (Heating/Cooling Jacket) Operating Pressure: -1 / +6 bar Test Pressure: 10.8 bar Temperature Range: -20 °C to +150 °C Pressure Vessel in accordance with PED 2014/68/EU Module G – Single Inspection Notified Body: TÜV SÜD (Identification No. 0036) Permitted Number of Load Cycles: 7,300 / 5,475 at a pressure fluctuation of 3.3 / 4.5 bar TÜV / PED / FAT • EU Declaration of Conformity as per 2014/68/EU • Certificate Number: Z-EU-SI-LJU-20-08-2350154-14124056 • Test report available • Hydraulic pressure test successfully completed • Acceptance by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) performed • Module G individual inspection • Turn-Over Package (TOP) fully available Complete documentation available The full technical documentation package is present, including: • EU Declaration of Conformity and Warranty Certificates • TÜV certificate with final inspection report • TÜV design review and certification • Nameplate documentation • General assembly drawings • Part drawings • Welder lists and Welding Procedure Qualifications • Work samples • Analysis certificates for welding consumables • Analysis certificates of welding gases • Manufacturer qualification certificate • Nondestructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal hydrotest report • Dimensional accuracy verification • Surface roughness protocol • Surface treatment report • Operation and maintenance manuals (vessel and components) Documentation scope meets pharmaceutical plant project standards. Design Features • Double jacket for heating and cooling • Constructed entirely from stainless steel 316L (1.4404) • Mirror-polished internal surface • Pharmaceutical-grade welds • CIP/SIP-compatible connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation provisions (pressure, temperature, sensors) • Robust project-quality fabrication • Lifting lugs for crane handling • Pressure design in accordance with PED Condition • Never used in production • Stock item from project surplus • Absolutely clean interior • No corrosion • No signs of use • In factory-new industrial condition • Immediately available Suitable for • Pharmaceutical solutions • WFI / PW systems • Elution / buffer production • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media Special features This is not a standard tank, but a high-end BRINOX project build in true pharma quality, featuring: • PED Module G individual inspection • TÜV SÜD acceptance • FAT conducted • Complete welding, material and inspection documentation • Documented surface treatment • 316L design for sterile applications Project quality for demanding GMP applications – available immediately.

Stanje: zelo dobro (rabljeno), Thread tap for pipe threads Fpsdpfxefhdwqo Anfsg Manufacturer: May Type: R 3 3/4 inch total length: 185 mm

Stanje: rabljeno, Tap for pipe threads Roughing and finishing cutter R 2 3/4 inch Fpsdpfodk Rdvsx Anfog

Stanje: rabljeno, Lot of 5 TIG Welding Machines ESS Type Thyrotig - Thyroplasma 250 (DC) TIG welding machines in need of repair Year of manufacture: 1991 to 1994 Output: 250 Amp = 60% duty cycle / 195 Amp = 100% duty cycle Current type: DC Power connection: 400 Volt, 50 Hz, 32 Amp plug - High-frequency ignition - 2-stroke and 4-stroke operation - Water-cooled - Some components missing - Supplied without torch packages, scope of delivery as shown Dimensions (L x W x H): 1200 x 570 x 920 mm Weight per machine: 255 kg Total weight (5 machines): 1,275 kg 3 machines are operational. 2 machines were used for spare parts in storage. However, none of the machines have been recently tested and are being sold as in need of repair. Fpedsw Hhbijpfx Anfjg

Stanje: rabljeno, prevoženi kilometri: 12.410 km, moč: 85 kW (115,57 KM), prva registracija: 05/2018, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 4.350 mm, širina tovornega prostora: 2.070 mm, višina nakladalnega prostora: 2.100 mm, Oprema: ABS, filter saj, je imel nesrečo, * Vehicle No.: - 90 * Euro 6 green environmental badge * Box body with parcel shelving * Loading dimensions approx. 4.35m x 2.07m x 2.1m * Rear axle air suspension * Hi-Matic 8-speed automatic transmission * Reversing camera * Gross vehicle weight (GVW) 3,500 kg, payload 1,000 kg * 2 seats * Partition wall with sliding door * Cargo area racking system * Electric windows * Central locking * Airbag * ABS * ASR (traction control) Fpedpfx Ajlxlqisnfeg * German vehicle, 1st owner * Original mileage with service book * !!! Vehicle has fire damage to interior !!! ---- -> Please note that viewings are only possible by prior appointment. Thank you for your understanding. -> Sale only to traders or for export. The above data, photos, and equipment list are for general vehicle identification only and do not constitute a guaranteed characteristic in the legal sense of the purchase contract! All specifications / equipment details are WITHOUT WARRANTY. Subject to change, prior sale, and errors! The equipment list does not form part of the contract and must be checked in detail on site at the vehicle by each interested party before purchase. Subsequent complaints will not be accepted.

Stanje: rabljeno, prevoženi kilometri: 17.234 km, moč: 85 kW (115,57 KM), prva registracija: 10/2017, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 10/2019, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 4.350 mm, širina tovornega prostora: 2.070 mm, višina nakladalnega prostora: 2.100 mm, Oprema: ABS, filter saj, je imel nesrečo, * Vehicle No.: 76 * Euro 6 green emissions sticker * Box body with parcel shelving * Loading dimensions approx. 4.35m x 2.07m x 2.1m * Air-suspended rear axle * Hi-Matic 8-speed automatic transmission Fpsdpelxlqfjfx Anfeg * Reversing camera * Gross vehicle weight 3,500 kg, payload 1,000 kg * 2 seats * Partition wall with sliding door * Cargo area shelving system * Electric windows * Central locking * Airbag * ABS * ASR * German vehicle, 1st owner * Original mileage with service book * !!! Vehicle has accident damage !!! ---- -> Please note that viewings are possible by appointment only. Thank you for your understanding. -> Sale only to traders or export. The above data, photos and equipment list serve solely for general vehicle identification and do not constitute a guaranteed characteristic in the sense of sales law! All information/equipment details are provided WITHOUT WARRANTY. Subject to change, prior sale, and errors! The equipment list is not part of the contract and must be individually checked on site by each interested party before purchase. Later complaints will not be accepted.

Stanje: dober (rabljeno), Cevni primež, stojalo za cevi, cevni primež, kleparski primež Fpsdpfx Asyay Uajnfog - Cevni primež: zložljiv - Največji vpenjalni razpon: do Ø 120 mm - Dimenzije: 250/80/V435 mm - Teža: 9,6 kg

Stanje: novo, Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a new square tube for sale. Scope of delivery includes: 01x Square tube, new Material finish: hot-dip galvanized Total length: 6,050 mm Profile dimensions: 50 x 50 mm Wall thickness: 2 mm Steel grade: S235JRH/275JRH Customs tariff number: 73066192 Manufactured according to: EN 10219-1 Our range of services at a glance: (Prices on request) Assembly and Installation Our general assembly conditions apply. Racking Inspection Racking inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234. Visual inspection for all racking systems. Delivery using our own fleet (without unloading) Fpodpfxsdzq Sce Anfsg

Stanje: rabljeno, Pneumo-hydraulic cylinder TOX Pressotechnik Hydro-pneumatic press unit, power package Type: S 04.00.050.12 D Serial no.: 208696.460 Year of manufacture: approx. 2000 Press force: 4.0 tons at 10 bar Press force: 3.0 tons at 8 bar Press force: 2.6 tons at 7 bar Press force: 2.4 tons at 6 bar Press force: 2.0 tons at 5 bar Press force: 1.6 tons at 4 bar Fpodsu D Tz Uopfx Anfog Press force: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Piston rod thread: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height (power package with piston rod): 610 mm - Height (power package, hydro-pneumatic cylinder only): 560 mm - Additional base plate 160 x 160 x 20 mm - Ram plate: Ø 68 mm Space requirements (L x W x H): 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 units available, price per unit

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, Maschinensucher – Trumpf TubeLaser 3000 – Ebertz Under 3,000 laser hours Fiber Tube Laser – immediately available Manufacturer: TRUMPF Model: TruLaser Tube 3000 fiber (T10) Year of manufacture: 2020 Machine number: A044D0013 Operating hours, approx.: 2,750 h, Beam on TECHNICAL DETAILS: Max. outer diameter round tube: 152 mm (170 mm chuck set) Fedpfx Asxn Tn Isnfspg Max. circumscribed diameter rectangular tube: 170 mm Max. raw material length for automatic loading: 6,500 mm Machine bed for 6.5 m raw material length Max. finished part length: 4,500 mm Max. workpiece weight kg/m: 18.5 (total 120 | 148[3] kg) Laser: TruFiber 2001 – 2kW (average power consumption 6kW) Max. material thicknesses: Mild steel: 8 mm Stainless steel: 4 mm Aluminium: 4 mm Copper/brass: 3 mm FEATURES: - Through feed chuck with self-centering clamping rollers - Work area lighting - Feed station with self-centering chucks - Tube support (raw material) with automatically retractable tube rests - Tube support (finished parts) with extendable guide rollers - High precision drives - Adaptive clamping technology for through feed chuck - Discharge station for 3 m finished part length (including scrap bin) - Parts tray TRUMPF Laser • Pump diode excitation • Laser power control • Laser logbook function • Enclosed beam guidance via laser light cable (LLK) Cutting head • Lens cutting head with 150 mm focal length • Magnetic coupling Control • TRUMPF control system based on Sinumerik 840D SL • Integrated technology data • Automatic power on/off • Tiltable control panel with 19" touchscreen • Condition Guide • Remote Support interface • Programmable cutting gas pressure Functions • AdjustiLine • NitroLine • FocusLine • ControlLine Data transmission - Online Update Manager - RJ45 network interface - USB interface - Wireless Operation Point - Central Link Safety - CE marking (factory) - Single and dual-beam safety light barriers - Monitoring system for gas pressure, temperature, and cooling water - Protective enclosure with laser safety windows ENHANCED STANDARD EQUIPMENT: • Solid-state laser TruFiber 2001 • Machine bed for 6.5 m raw material length • LoadMaster Tube for 6.5 m raw material length • Laser cooling unit (water-air) • Compact dust extractor Machine accessories • Initial set of cutting nozzles • Ceramic part (1 piece) • Chuck set up to D152 mm/D170 mm • Guide rollers for round and rectangular tubes SPECIAL EQUIPMENT: - Increased finished part length +1.5 m with additional finished part support - SeamLine Tube with internal detection, weld seam detection on the inside and outside of the tube - Low-marking LoadMaster Tube version, plastic rollers and strips - Adaptive clamping technology – feed station with additional clamping elements for clamping L- and U-sections as well as flat material - MobileControl App This used machine can be inspected under production conditions. All information is provided without guarantee – sale is made under exclusion of all warranties and guarantees and exclusively under our General Terms of Sale and Conditions. Subject to prior sale.

Stanje: zelo dobro (rabljeno), SMT Lathe 80001350 This machine was designed and manufactured specifically for the production of rotor shafts for electric power tools. The machine was developed and built to automatically perform the following operations: - Automatic loading/unloading of parts from/to the tool carrier line using a pick & place unit positioned between the shaft ends. - Turning of ring seat + facing of commutator + turning of commutator. - Ring assembly – commutator side - Ring assembly – drive gear side The machine features multiple production programs for manufacturing a variety of parts. Each program corresponds uniquely to a specific shaft type. Technical Data Armature shaft length: 92.5 – 163.1 mm Bearing journal diameter: - Commutator side: 8; 10; 12.5 mm - Drive side: 12; 8 mm Minimum available length for bearing journal: 3.6 mm Stack (lamination) diameter: 52; 55; 59 mm Fsdpfx Anshw Emqjfepg Ring dimensions Outer diameter: 40 – 57.4 mm Inner diameter: 37.4 – 56 mm Ring width: 4 – 8 mm Ring seat diameter: 44 – 50 mm Ring seat surface Rz: 20 mm Main machine dimensions & weight Machine length: 2870 mm Machine width: 2600 mm Machine height: 2530 mm Machine weight: 5000 kg Electrical installation Rated current: 10 A Rated voltage (AC): 400 V Rated power: 7 kVA Rated frequency: 50 Hz Pneumatic installation Nominal pressure: 5 bar Maximum pressure: 10 bar Financing through our bank is also possible. komplett-konzept.leasingo.de You will find more articles – new and used – in our shop! International shipping costs on request!

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 10-166, OFFER 13467 Technical Data: - Max. material thickness at 40 kg/mm² tensile strength approx.: 3 mm - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirement approx.: W 550 x H 1200 x D 1200 mm Fsdpfxehrm Ius Anfjpg - Weight approx.: 180 kg

Stanje: dober (rabljeno), Ozemski kabel za aparat za zaščitni plin, elektrodski aparat Fpodpfx Aox R S Alonfeg - Dolžina: 8 m - Izvedba: Dinse priključek, plinska cev, krmilni kabel - Hlajenje: vodno hlajenje - Teža: 24 kg

Stanje: rabljeno, TIG torch package, welding torch, manual welding torch, TIG torch -includes: torch body Fodjd Nv A Hjpfx Anfspg -Length: 8 m -Tuchel connector: 5-pin -Water-cooled -Weight: 4.2 kg

Stanje: rabljeno, TIG torch package, welding torch, manual welding torch, TIG torch Fsdpfx Asd Nv A Ienfopg - includes: torch body - Length: 8 m - Tuchel connector: 5-pin - Water-cooled - Weight: 3.5 kg

Stanje: rabljeno, TIG torch package, welding torch, manual welding torch, TIG torch - includes: torch body - Length: 8 m - Tuchel connector: 5-pin - Water-cooled - Weight: 3.7 kg Fpsdpfx Ajd Nv A Renfeg

Stanje: rabljeno, MIG/MAG welding torch hose package -Length: 3.5 m -Connector -Gas-cooled Fjdpfx Aned Skk Eefepg -Weight: 2.8 kg

Stanje: rabljeno, MIG/MAG torch extension hose, intermediate hose package -Length: 16.0 m -Plug connection -Water-cooled Fpsdsd S D Dmspfx Anfog -Weight: 16 kg

Stanje: rabljeno, TIG welding torch package, welding torch, manual welding torch, TIG torch -includes: torch body Feded Nvz Sjpfx Anfepg -length: 8 m -Tuchel connector: 5-pin -water-cooled -weight: 3.2 kg

Stanje: rabljeno, MIG/MAG torch package -Length: 3.0 m Fsdpfod Nvz Tex Anfjpg -Connector -Water-cooled -Weight: 4 kg