Cevni Paket nakup rabljenega (1.073)

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Equipment Number: KK6752 Design: Stainless steel skid, pharmaceutical-grade construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless steel 1.4435 / 1.4404 Non-product-contact: Stainless steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fully welded design As-built isometry available Pressure Data: Leak test with compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Flow monitoring Position feedback Motor control Open/Close valves pneumatic Pressure sensor measuring range: 0–10 bar Electrical Connection: Control air: 6 bar Automation-ready (instrumentation points fully documented) Main Components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Cooling brine (supply/return interfaces available) ───── Csdpfxsyl Ipcs Agtjgt Dimensions / Weight Design: Compact skid unit Industrial version for cleanroom/technical area (Transport and installation dimensions as per layout drawing) Application Area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Field of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Vibration-damped pump mounting Hygienic piping layout Fully P&ID-compliant implementation Clear separation of product/non-product areas Service and maintenance accessibility tested Mechanical SAT-IQ test performed Measurement SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Year of Manufacture: 2020 Industrial and pharmaceutical-grade version New, original packaging Pressure tested Sensors calibrated FAT (Factory Acceptance Test) performed FAT / Documentation Available: FAT plan and report Deviation management Layout check P&ID check Leak test Sensor calibration Service and accessibility check EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & instrumentation points) Special Features Pharma GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality system construction by BRINOX High-end biopharmaceutical standard

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag Number: MR-INH-VPR61-KK6751 Equipment Number: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (temperature control skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Fully insulated piping and components Pumps: Two circulation pumps with electric motor Stainless steel pump housing Inline design Heat Exchanger: Integrated stainless steel heat exchanger Tube bundle and shell-and-tube design Fittings: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Instrumentation: Pressure transmitter Manometer Temperature measuring points Integrated flow measurement Electrical: Integrated control cabinet or terminal box Pre-wired, ready for connection Industrial standard components Piping: Stainless steel process piping Fully insulated Flange and clamp connections Transport: Suitable for forklift and crane handling Solid stainless steel base frame Application The temperature control unit is designed for the controlled tempering of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical process plants, and temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready for connection High-quality stainless steel construction Industrial quality components, including GEMÜ fittings Service-friendly layout Csdpfx Agjyl Ib Ejtogt Condition New equipment Never been in operation Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documents available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Industrial brand components Ideal for new projects or as a replacement/redundancy unit Immediate integration possible

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Machine designation BRINOX LEP 12 – CIP System Precipitation PRE LEP 12 CS6725 Package 5 Manufacturer BRINOX Prozess- und Edelstahltechnik GmbH, Offenburg Year of manufacture 2020 Serial number 1003614 Technical data Compact CIP skid unit in stainless steel frame construction. Product description: LEP 12 – CIP System Precipitation PRE. Approximate dimensions: 1520 x 970 x 1994 mm. Product-contact materials: Stainless steel 1.4435. Frame and structural components: Stainless steel 1.4301. Integrated shell-and-tube heat exchanger, make: NEUMO. Centrifugal pump in hygienic version. All pipework fully welded, pharmaceutical execution. Media lines insulated. Fittings include GEMÜ ball valves. Various integrated pressure gauges and measuring instruments. Calibrated pressure measurement system (Fluke pressure transducer, measuring range −1 to 20 bar, resolution 0.001 bar, accuracy 0.06% FS). Media connections: NaOH Acetic acid CIP supply CIP return Black steam Black steam condensate Neutralised wastewater Leak test performed with compressed air. Test pressure range approx. 3.19–3.24 bar. Maximum measured pressure drop < 0.015 bar within test duration. Result: passed. Application CIP cleaning system for pharmaceutical process plants, especially for precipitation tanks. Suitable for caustic and acid cleaning as well as steam connection. Designed for hygienic applications in pharmaceutical production. Construction Welded, compact skid design with robust stainless steel frame construction. Hygienic piping with defined media routing. Integrated shell-and-tube heat exchanger for CIP media temperature control. Integrated process pump, valve technology, and instrumentation on a compact frame. General tolerances in accordance with EN ISO 13920. Industrial-grade with crane lugs for transport. Condition New, unused, original packaging. The unit has only undergone FAT testing and has never been in production operation. FAT / Documentation status Complete Factory Acceptance Tests performed. Leak tests successfully passed. Calibration certificates available. Cgjdpfx Asyl H Tajgtet Test protocols fully documented. Complete documentation included FAT documentation Leak test protocols Calibration certificates P&ID 3D drawings Material and weld documentation Nameplate and manufacturer documentation Special features Material selection suitable for pharmaceutical applications. Compact, ready-to-use skid unit. High-quality components from renowned manufacturers. Comprehensive technical documentation available. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Manufacturer BRINOX Model LEP 12 – CIP System Precipitation PRE LEP 12 CS6721 Package 3 Year of Manufacture 2020 Cedpfxoyl H H Ts Agtsgt Condition New, original packaging, unused. The system has only been tested at the factory as part of the FAT (Factory Acceptance Test). No commissioning, no production, no contact with process media in operation. Description Modular CIP process system for pharmaceutical applications in hygienic stainless steel design. Compact skid-mounted unit with fully integrated measurement, pump, and valve technology. Dimensions Approx. 1520 x 970 x 1994 mm Materials Product-contact parts: Stainless steel 1.4435 Frame/structure: 1.4301 Welds in accordance with EN ISO 13920 Equipment – Shell-and-tube heat exchanger – Hygienic centrifugal pump – Electromagnetic flowmeter – Conductivity measurement – Pressure transmitter – Temperature measurement points – Pneumatic seat and diaphragm valves – Stainless steel frame structure – CIP supply / CIP return – Media connections for NaOH, acetic acid, steam, condensate, wastewater Tests Complete FAT performed including: – Layout inspection – P&ID check – Maintenance and calibration accessibility check – Documentation check – Surface roughness measurement – Sensor calibration – Welding documentation check – Leak test with compressed air – passed Calibration certificates available. Material certificates 3.1 available. Complete welding documentation (WPS, WPQR, welder certificates, NDT records). CE-compliant design. Scope of delivery Complete pre-assembled process module including documentation. FAT records, welding reports, material certificates, and calibration certificates fully included.

Leto izdelave: 2020, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Fabricant BRINOX Désignation de la machine Installation CIP CS6720 Modèle LEP12 – Module CIP avec réservoir tampon isolé de 200 L Année de fabrication 2020 État Neuf, inutilisé, emballage d’origine, jamais installé, jamais mis en service Cgodpfeyl H Htjx Agtst Type d’installation Installation CIP modulaire (Cleaning in Place) sur cadre en acier inoxydable, entièrement prémontée. Composée d’un réservoir tampon CIP isolé, d’une pompe centrifuge, d’un échangeur de chaleur, d’un module de tuyauterie en acier inoxydable, de technologie de vannes, de technologie de mesure et de régulation ainsi que de raccordements pour les fluides. Dimensions du cadre env. 2330 x 1224 x 2127 mm Réservoir tampon Volume de travail 200 litres Volume total 278 litres Conception cylindrique avec fonds bombés selon DIN 28011 Pression de service -1 à +3 bar Pression d’épreuve 5,4 bar Température admissible -10 °C à +150 °C Température de fonctionnement 0 °C à +85 °C Groupe de fluides 1 Isolation : laine de verre à faible teneur en chlorures (

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Manufacturer: BRINOX Type: LEP 11 – CIP Skid Year of manufacture: 2020 Version: Pharma / GMP Condition: New, unused, original packaging LEP 11 CS6710 Package 1 Machine type Pharmaceutical CIP unit (Cleaning in Place) as a compact package unit on a stainless steel frame. Application Automated cleaning of process plants, chromatography systems, vessels and piping systems in the pharmaceutical, biotech and chemical industries. Suitable for NaOH, acetic acid, WFI, PW and other cleaning media. Technical Data CIP medium heating capacity: from +5 °C to +80 °C in max. 10 minutes Pump capacity: 1 – 4 m³/h (adjustable) Operating pressure at CIP supply: 1 – 3 bar (adjustable) Measuring ranges: Flow: 0 – 10 m³/h Temperature: 0 – +150 °C Pressure: 0 – 6 bar Design pressure: -0.9 to +6 bar Design temperature: +2 to +95 °C Construction • Compact package unit on stainless steel frame • CIP supply pump as centrifugal pump • Shell-and-tube heat exchanger with leak-proof transfer • Height-adjustable dome feet • Completely drainable design • Maintenance-friendly layout • Industrial heavy-duty construction Material & GMP version • Product- and cleaning-media-contact parts made of stainless steel 1.4435 • Electropolished surfaces Ra ≤ 0.8 µm • FDA-compliant seals (EPDM / PTFE / silicone) • Designed for NaOH 0.3 mol/L at +80 °C • Resistant to acetic acid, WFIH, WFIC, PUW Documentation & Quality • Complete GMP documentation • CE conformity • 3.1 material certificates • Complete welding protocols • Weld seam documentation incl. photo documentation • Pressure and leak tests documented • FAT documentation available • Drainability and final rinse certificates available Condition • New • Unused • Originally packaged • No production hours • Immediately available Special features • Very high thermal cleaning performance • Fully adjustable process operation • Pharma GMP top configuration • High-quality European components Cgodpfxjyl Hwlo Agtst • Investment-safe system with complete documentation Location: Germany Inspection possible by appointment

Stanje: zelo dobro (rabljeno), Machine package: 30 units 110V. A voltage converter (110V to 230V), a heavy-duty extension cable, and a 4-way socket distributor are included in the price. 1. Hilti TE35 2. Hilti TE 40 AVR 3. Hilti DEG 4. Hilti WSR 1400-PE 5. Hilti DC 230 6. Hilti SD 2500 7. Hilti ST 1800 8. Hilti SD 2500 Cgsdovzcrmspfx Agtst 9. Hilti SD 2500 10. Hilti SI 100 11. Kress HMX 24 600W 12. Kress HMX 24 600W 13. Kress HMX 24 600W 14. Hilti TE 6S 15. Hilti DEG 16. Hilti TE2 17. Hilti WSJ 850-ET 18. Hilti WSJ 850-ET 19. Hilti SR 16 20. Hilti SR 16 21. Hilti SR 16 22. Hilti SR 16 23. Hilti SR 16 24. Hilti UD 30 650W 25. Hilti UD 30 650W 26. Hilti UD 30 650W 27. Hilti TE2 650W 28. Hilti TE2 600W 29. Hilti DEG 30. Hilti ST 1800 600W

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.500 l, Oprema: dokumentacija / priročnik, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Storage tank / process tank Nominal volume: 3,500 liters Total volume: 4,082 liters Jacket volume: 226 liters Empty weight: approx. 1,760 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: 1.4404 CE marking: CE 0036 Permissible pressure PS vessel: -1 / +3 bar Permissible pressure PS jacket: -1 / +6 bar Test pressure PT vessel: 5.6 bar Test pressure PT jacket: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design inspection, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was fully inspected and released ex works. Carried-out inspections incl.: • Pressure test according to PED • Design inspection by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing comparison (as-built) • Verification of material certificates • Calibration of manometers • Checking of markings • Documentation check as per test list FAT and TÜV protocols fully available. DESIGN • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-grade pharmaceutical design • Manhole with round pressure locking system • CIP piping system • J-tube / internal piping • Sight glass DN80 • Multiple reserve- and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design Cgedpsylnwyjfx Agtet • Lifting lugs • Nameplate with complete PED identification DOCUMENTATION – fully and structurally available • EU Declaration of Conformity • TÜV certificate with acceptance report (Module G) • TÜV design inspection and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Calibration certificates for manometers • Surface and manufacturing reports • Parts list • Detailed drawings (body, lid, CIP, J-tube, etc.) • Operating and maintenance manuals Complete digital documentation file available. CONDITION • Never used in production • Stock item • Internal surfaces as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production plants • Process and disposal systems SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking and documented FAT inspection. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.500 l, Oprema: dokumentacija / priročnik, BRINOX 3,500 L Storage Tank – 1.4404 – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o., Slovenia Type: SVBBH-3500 Item No.: Serial Number: 1003461 Year of Manufacture: 2020 Condition: As new / unused BH6771-BH1001 Package 29 TECHNICAL DATA Product Type: Storage Tank / Process Vessel Nominal Volume: 3,500 liters Total Volume: approx. 4,082 liters Empty Weight: approx. 1,750 kg Product-contact Material: 1.4404 (AISI 316L) Internal Surface: Electropolished Surface Roughness: tested according to roughness protocol (Ra ≤ 0.8 µm) Permissible Pressure PS Vessel: -1 / +3 bar Test Pressure PT Vessel: 5.6 bar Permissible Pressure PS Jacket: -1 / +6 bar Test Pressure PT Jacket: 10.8 bar Permissible Temperature TS: -10°C to +150°C Fluid Group: 2 Design to AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – Single Inspection CE Marked FAT – Factory Acceptance Test Complete FAT acceptance conducted on 26 August 2020. Documentation Review: complete and released Welding documentation checked and compliant Delta ferrite test performed, no deviations Surface roughness checked and passed All tests rated as "OK". FEATURES • Horizontal cylindrical pressure vessel • Dished ends (Klöpperbottoms) • Multiple CIP ports at the front end • CIP spray ball system • Manway with round pressure closure • Pressure and temperature connections • Bottom outlet • Stainless steel support legs • Pharmaceutical-grade weld seams DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificate • Module G Individual Inspection • FAT protocols • Welding documentation • WPQR / WPS • 3.1 Material certificates • Non-destructive test reports • Delta ferrite test report • Roughness protocol • Dimensional accuracy check • Calibration certificates • Technical drawings • Parts list • Operation and maintenance manual Complete digital documentation file available. CONDITION • Never in productive use • Stored as warehouse stock • Internal surfaces absolutely as new • No corrosion Cgjdpeylnppjfx Agtjt • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURES Custom-manufactured BRINOX pharmaceutical vessel with full FAT acceptance, inspected welding documentation, delta ferrite verification, documented surface roughness and comprehensive PED Module G individual inspection. Not a standard tank – but pharmaceutical-grade, validation-ready, with comprehensive technical documentation.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.500 l, Oprema: dokumentacija / priročnik, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial Number: 1003460 Year of Manufacture: 2020 Condition: As new / unused Package 28: BH6770-BH1001 TECHNICAL DATA Product Type: Batch Tank / Pressure Vessel Working Volume: 3,500 litres Total Volume: 4,304 litres Jacket Volume: 202 litres Empty Weight: 1,958 kg Wetted Material: 1.4435 Jacket: 1.4404 CE Marking: CE 0036 Permissible Pressure Vessel PS: -1 / +3 bar Test Pressure Vessel PT: 5.6 bar Permissible Jacket Pressure PS: -1 / +6 bar Test Pressure Jacket PT: 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Design Standard: AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (Identification number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The tank was subjected to a complete FAT at the factory and released. Inspections performed include: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive examinations (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Interior roughness measurement (Ra ≤ 0.8 µm) • Calibration check of pressure gauges • Verification of labelling • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal tank • Double jacket with half-pipe coil • Internally electropolished and passivated • High-gloss polished product-contact surface • Pharmaceutical-grade weld seams • Manhole DN 500 • Powder/product inlet nozzle DN 300 • CIP connections • Safety valve • Pressure and temperature ports • Agitator connection • Heavy-duty trunnion mounting • Lifting lugs DOCUMENTATION – complete and structured Comprehensive project-specific quality and manufacturing documentation, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification Codpfxeylng Us Agtegt • Material certificates 3.1 • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT etc.) • Analysis certificates for welding consumables and gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates • Reports and EU conformity for installed components • Compilation with parts list • Partial drawings • Operating and maintenance manuals Complete digital documentation file available. CONDITION • Never in productive use • Stored as inventory • Internal surface absolutely as new • No corrosion • No signs of use • Absolutely mint industrial condition • Available immediately SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotech applications SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with full PED Module G individual certification by TÜV SÜD, CE 0036 marking, and documented FAT test. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation.

Stanje: rabljeno, prevoženi kilometri: 16.250 km, moč: 120 kW (163,15 KM), barva: črn, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: ABS, airbag, greljenje sedeža, klimatska naprava, servovolan, - Passenger airbag - Electronic window lifter - left - Electronic window lifter - right - Driver airbag - To ensure you receive the best possible advice, we kindly ask you to arrange an appointment. Mr. Kiel will be happy to assist you, Tel: B25 Electric parking brake BA3 Active brake assist BH1 HOLD function BS1 Brake calipers with Mercedes-Benz lettering C6L Multifunction steering wheel C74 Mercedes-Benz illuminated entry badge CF8 Sports suspension CK8 Steering wheel heating CL1 Steering wheel adjustable in tilt and height CL3 Leather steering wheel CM2 Bumper and add-on parts painted in body color CU4 Aerodynamics package D14 Anodized roof rails E07 Hill-start assist E1D Digital radio (DAB) E1E Navigation E1T Touchpad E4S Smartphone integration package E7M MBUX multimedia system ED4 Fleece battery 12 V 92 Ah EL9 2-way speakers front and rear ES3 12V sockets for rear seat rows right & left ET4 Active Distance Assist DISTRONIC F1O Center console with storage compartment & cupholder front F2W Winter package F3Z Comfort closing F48 Heated windscreen washer system F65 Electrically folding exterior mirrors F66 Lockable glove compartment F69 Exterior mirrors (abbreviation, context needed) F71 Automatically dimming interior mirror FG9 Detachable cupholder in rear armrests FH0 Decorative elements in piano black finish FP3 Mirror package FS5 Illuminated vanity mirrors in sun visors G43 9G-TRONIC H00 Warm air duct to passenger compartment H15 Heated seat for passenger H16 Heated seat for driver H20 All-round heat-insulating glass HH9 SEMI-AUTOMATIC TEMPMATIC AIR CONDITIONING HZ0 Electric supplementary heater HZ7 Semi-automatic air conditioning TEMPMATIC in rear IL5 Left-hand drive IL6 Metallic paint finish IN1 Wheelbase 3200 mm, short overhang J55 Seat belt warning system for passenger seat JA7 Blind spot assist JA9 Traffic sign assist JB4 Active lane keeping assist JB7 Parking package with reversing camera JH0 Widescreen cockpit JH3 Communication module (LTE) for digital services JP1 PRE-SAFE JW8 ATTENTION ASSIST JX2 Maintenance interval 40,000 km K51 Misfuel protection KB5 Main tank 70 liters L LEFT-HAND DRIVE L45 MULTIBEAM LED with high beam assist PLUS LA2 Headlight assist LB9 Exit lights LC4 Comfort roof control unit LC5 Surround lighting in exterior mirrors LC6 Lighting in rear grab handle with reading spot LC7 Footwell lighting, front LC8 Surround lighting, tailgate LE1 Adaptive brake light Codpfx Agoyf T Uqjtjgt LE4 Ambient cockpit lighting in 64 colors LE6 Night lighting, rear LG4 Rear, brake, and turn signals in LED technology MG9 Generator management MJ8 ECO start/stop function MO5 EMISSION CLASS EURO 6e RDE5 M/N1 GR. II MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800 rpm MX0 BlueEFFICIENCY package P28 EASY PACK package Electric sliding door/tailgate P2Y STYLE Plus package Q50 Detachable ball-head trailer coupling QA4 Towing capacity 2500 kg RY2 Wireless tire pressure monitoring on front and rear axle SA1 Seat cushion depth adjustment driver SA2 Seat cushion depth adjustment passenger S... Metallic paint, alloy wheels, electronic immobilizer, ESP, navigation system, particulate filter, warranty, rain sensor, electr...

Stanje: novo, NOVO BLAGO Cena brez DDV. Blago je na voljo tudi v drugih količinah in izvedbah. Ta paket vsebuje: 11 x stojalo višine 220 cm x globine 40 cm 60 x polic dimenzije 130 cm x 40 cm 240 x nosilcev za police 6 x diagonal z napenjalcem Nastane ena vrstica s 10 polji in 6 nivoji na polje, skupna dolžina cca 1306 cm Csdpjyh Dttsfx Agtegt 400 m takoj na voljo! Proizvajalec: META Clip Tip: Regal za police Stanje: Novo Višina: 220 cm Dolžina: cca 1 x 1306 cm Globina okvirja: 40 cm Sestava: sistem z vtikanjem Nosilnost police: 150 kg na polico Dodatna oprema, kot npr.: Talna pritrditev Povezovalni elementi Opozorila o obremenitvi Zaščita proti udarcem Odbijačne ograje Rešetkaste police Zadnje mreže Globinski nosilci Omejitvene ograje in še veliko več... Preprosto nas povprašajte!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, NOVO BLAGO Cena je brez DDV. Blago je na voljo tudi v drugih količinah in izvedbah. Cgodoyh Drcjpfx Agtot Paket vsebuje: 3 x stojalo, višina 220 cm x globina 40 cm 12 x police, vsaka 130 cm x 40 cm 48 x nosilec polic 2 x diagonalni povezavi z napenjalcem Nastane posamezna vrsta z 2 polji in 6 nivoji na polje, skupna dolžina cca 2,65 m 400 m takoj na voljo! Proizvajalec: META Clip Tip: regal za police Stanje: Novo Višina: 220 cm Dolžina: cca 1 x 266 cm Globina okvirja: 40 cm Sestava: vezni sistem Nosilnost police: 150 kg na polico Dodatna oprema, kot npr.: Talna pritrditev Povezovalni elementi Opozorila o obremenitvi Zaščita pred udarci Zaščitne ograje Mrežaste police Zadnje mreže Vzdolžne pregrade Omejitvene ograje in še veliko več... Povprašajte nas!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Zimski komplet za Nilfisk CR3500: + Snežni plug Fiedler FRS 1504 180 kg hidravlično nastavljiv 150 cm širok + Valjasti posipalec Cgodpfx Agjxwm E Estet hidravlični pogon 100 cm širok + Keson zadnji prekucnik aluminijaste stranske stranice ponjava transportni okvir + Upravljalna plošča okrogel priključek Prejemajte vsa nova vozila po e-pošti – prijavite se na naš NEWSLETTER! Možne napake in vmesna prodaja pridržane!

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of Construction: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE Marking: CE 0036 Condition: As new / unused Empty Weight: 866 kg TECHNICAL DATA Product Type: Main Filling Vessel / Process Vessel Design: Cylindrical with dished heads Working Volume: 1,500 litres Cgedpfx Aoykuhijgtet Total Volume: 1,785 litres Product-contact Parts Material: 1.4435 Jacket Material: Stainless steel (double-jacket design) Max. Permissible Pressure (PS) Vessel: -1 / +3 bar Test Pressure (PT): 5.4 bar Max. Permissible Temperature (TS): -10 °C / +150 °C Pressure vessel according to PED 2014/68/EU Module: G Fluid Group: 1 SURFACE & EXECUTION Internal Surface: High-gloss polished, pharmaceutical design Product-contact areas in 1.4435 Welds neatly ground Pharma CIP-capable design EQUIPMENT • Double jacket for heating/cooling • Large manway with clamp closures • Multiple instrument and process nozzles • Pressure sensor / temperature ports • Bottom outlet • CIP/spray ball connections • Various blank flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Stored as stock • Interior absolutely as new • No corrosion • No signs of use • Immediately available DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV inspection documents • PED Module G documentation • 3.1 material certificates • Pressure test protocol (PT 5.4 bar) • Technical drawings • FAT documentation • Operating manual SPECIAL FEATURE Large-capacity BRINOX main filling vessel 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with complete documentation, pharmaceutical surface finish and pressure test at 5.4 bar. Project quality for sterile applications – available immediately.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Process Vessel – 1.4435 – Jacketed – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6722-BH1001 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Type: Main Vessel / Process Vessel Design: Cylindrical with torispherical (Klöpper) heads Working Volume: 94 – 1,500 litres Empty Weight: 866 kg Cgsdpsykuc Tofx Agtjt Product contact material: 1.4435 Jacket material: 1.4307 Insulation: Fitted Operating Pressure (Vessel): -1 / +3 barg Max. Allowable Pressure (PS): -1 / +3 barg Test Pressure (PT): 5.4 bar Permissible Temperature (TS): -10 °C / +150 °C Pressure Test Date: 2020/04 Pressure vessel as per PED 2014/68/EU Category IV Assessment Procedure: Module G Notified Body: TÜV SÜD Industrie Service GmbH Design Code: AD 2000 SURFACES & WELDS Internal Surface: Electropolished and passivated Pharmaceutical-grade finish External Surface: Industrial ground finish NDT / Inspections: RT (Radiographic testing) PT (Dye penetrant testing) Documented pressure test 2020 EQUIPMENT • Double jacket for heating/cooling • Large frontal manway • Multiple process nozzles • CIP connections • Temperature and pressure connections • Safety fittings • Agitator mounting point • FDA-compliant seals • Complete piping module CONDITION • Never used in production • Warehouse stock • Internal surface absolutely as new • No corrosion • No signs of use • Immediately available DOCUMENTATION – Complete • EU Declaration of Conformity • TÜV certificates and acceptance reports • PED Module G documentation • Material certificates 3.1 (EN 10204) • Welding protocols • NDT reports (RT / PT) • Pressure test report 2020 • Surface inspection reports • Detail and assembly drawings • FAT documentation • Operation and maintenance manuals SPECIAL FEATURE BRINOX pharma process vessel in 1.4435 with electropolished internal surface, AD2000 design, PED Category IV Module G, full TÜV acceptance in 2020, and complete technical documentation. Project quality for sterile applications – immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-Filling Tank – 1.4435 Stainless Steel – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Model: SVMMBI-1000 Tag No.: BH6725-BH1001 Serial No.: 1003455 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: Like new / unused TECHNICAL DATA Product type: Pre-filling / Process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product-contact material: 1.4435 Permissible pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150°C Fluid group: 1 Design standard: AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual Inspection Notified body: TÜV SÜD Identification number: 0036 FAT – Factory Acceptance Test Complete FAT carried out and documented by the manufacturer. Tests include pressure test, NDT, dimensional inspection, surface roughness measurement, and documentation release. SPECIFICATION • Cylindrical horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade welding • Manway DN500 • Multiple process and measurement nozzles • Safety valve • CIP connections • For pressure and vacuum operation CONDITION • Never used in production • TÜV Module G certified • Industrial as-new condition • Immediately available DOCUMENTATION – complete and available Structured documentation package including: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design review • FAT documentation • Material certificates • Welder lists and WPS/WPQR • NDT reports • Surface roughness record • Surface treatment report • Internal pressure test • Dimensional report • Calibration certificate for pressure gauge • Part drawings • Assembly with bill of materials • Operating and maintenance manuals (unit & components) • Qualification certificates • Analysis certificates for welding consumables and protective gas Digital documentation folder fully available. Cjdpfjykt T Rox Agtegt SUITABLE FOR • Pharmaceutical applications • WFI / PW • GMP plants • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical vessel with PED Cat. IV Module G individual inspection by TÜV SÜD, full FAT, and complete technical documentation. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BH6723-BH1001, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-Filling Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Model: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling / Process Vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: approx. 610–762 kg Product-contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate No.: Z-EU-SI-LJU-20-05-2702107-19125214 Test Report No.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection according to PED Annex I No. 3.2 carried out Pressure test according to Annex I No. 3.2.2 carried out Accepted without deviations Permissible number of load cycles: 10,000 cycles (1.3 bar) Date of acceptance: 20.05.2020 FAT – Factory Acceptance Test Codpfx Ajykqmzegtsgt Complete factory FAT performed: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional check • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation verification FAT fully documented. CONSTRUCTION • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade welding • Manway DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • Designed for pressure and vacuum operation CONDITION • Never used in production • Factory-tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Comprehensive, structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design inspection • FAT protocols • Material certificates to EN 10204 3.1 • WPS/WPQR and welder lists • NDT reports • Surface roughness protocols • Internal pressure test reports • Dimensional protocols • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation file available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP plants • Biotechnology High-end BRINOX pharmaceutical design with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – certified project quality. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BH6721-BH1001, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-filling Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag-No.: BH6721-BH1001 Serial number: 1003453 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling tank / process vessel Nominal capacity: 1,000 liters Total capacity: 1,400 liters Empty weight: 762 kg Product contact material: 1.4435 (AISI 316L pharmaceutical grade) CE marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design in accordance with AD 2000 regulations Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (identification number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and released at the factory. Tests performed include: • Pressure test to PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT per testing plan) • Dimensional and drawing verification (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Check of labeling • Complete documentation check FAT protocols fully available. DESIGN • Cylindrical, horizontal vessel • Double jacket for heating/cooling • Internally electropolished and passivated • Highly polished product contact surface • Pharma-grade weld seams • Manway DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator connection (DN 200) • Multiple spare connections • Heavy-duty trunnion bearing/mount • Transport and lifting device Cedpfxjykpqre Agtogt DOCUMENTATION – fully available and structured Extensive project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with inspection report (Module G) • TÜV design test and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and shielding gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy inspection report • Internal pressure test report • Calibration certificates of pressure gauges • Reports and EU conformity of installed components • Compilation with parts list • Component drawings • Operating and maintenance manuals Full digital documentation folder available. CONDITION • Never used in production • Stored as stock • Internal surface absolutely as new • No corrosion • No signs of use • Industrial as-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Primary Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Package 22 Serial Number: 1003457 Year of Manufacture: 2020 Condition: Like new / unused CE Mark: CE 0036 TECHNICAL DATA Product type: Primary Precipitation Vessel / Process Vessel Nominal volume: 1,500 liters Total volume: 1,785 liters Empty weight: approx. 866 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: Stainless steel Operating pressure vessel: -1 / +3 bar Test pressure vessel: 5.4 bar Operating pressure jacket: as per design Temperature range: -10 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Individual inspection Inspected by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel was fully tested at the BRINOX factory as part of a documented FAT. Tests performed included: • Delta ferrite test of weld seams (compliant, no deviations) • Surface roughness test (Ra internal ≤ 0.8 µm, compliant) • Visual inspection of all product-contact surfaces • Pressure testing as specified • Documentation verification • GMP deviation management (non-critical points, fully closed) Cgjdpfx Aoykn Iisgtot • Measuring equipment with valid calibration certificate EXECUTION • Double jacket for heating/cooling • Horizontal orientation • High-quality pharmaceutical design • All product-contact areas in stainless steel 316L • Mirror-polished internal surface • GMP-compliant, documented welds • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Instrumentation prepared (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flange bottom • Lifting lugs and transport configuration • Project build for CSL Behring (Project SPHINX) CONDITION • Never used in production • Direct from project surplus • Internally absolutely as new • No corrosion • No signs of wear • Industrial mint condition • Immediately available DOCUMENTATION Complete project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection documents • PED Module-G documentation • Material certificates 3.1 • Welding documentation (WPS/WPQR) • Delta ferrite test reports • Roughness measurement logs • Calibration certificates for measuring devices • GMP deviation reports • Fully signed FAT protocols • Operating and maintenance documentation Documentation is complete and well-structured. • Pharmaceutical active ingredient processes • Precipitation and reaction processes • Buffer and solution preparation • Sterile liquid processing • Biotechnology • GMP-compliant production facilities • High-purity media SPECIAL FEATURE This is a premium BRINOX process vessel manufactured for CSL Behring in genuine pharmaceutical project quality, with full PED Module-G individual inspection, documented FAT 2020 and complete GMP documentation. Not a standard tank – but certified project quality for sterile applications. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 30.000 l, Oprema: dokumentacija / priročnik, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – Incl. Saddle Support – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial Number: 1003464 Year of Manufacture: 2020 Condition: As new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / Solution Tank / Pharmaceutical Process Vessel Working Volume: 30,000 liters Total Volume: 33,213 liters Product-contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated, and cleaned Surface roughness: Ra < 1.6 µm Standards and Guidelines: • PED 2014/68/EU compliant • CE marking present • GMP-compliant pharmaceutical design Pressure Data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20 °C to +50 °C Hydrostatic pressure test performed. FAT – Factory Acceptance Test A fully documented FAT carried out, including: • Dimensional, visual and identification check • Weld inspection and NDT • Pressure test according to PED • Testing of all nozzles/connections • Documentation and quality inspection FAT fully passed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel Cjdpfxoykngfs Agtogt • Stainless steel 316L, pharmaceutical grade • Internal surface pickled and passivated • Hygienic, GMP-compliant construction Connections, incl.: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measurement, safety and process connections Mechanical design: • Original BRINOX stainless steel saddle support included • Heavy-duty construction • Lifting points for crane handling available CONDITION • Absolutely new condition • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle support also in new condition and part of scope of delivery. DOCUMENTATION – fully available (GMP-compliant) Comprehensive manufacturer and project documentation incl.: • EU Declaration of Conformity and CE documentation • PED documents • Material certificates EN 10204 – 3.1 • Welding documentation (WPS / WPQR, welder lists) • NDT test reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Partial drawings and parts lists • Operating and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging available • Original industrial packaging • Crane handling possible without issue • Worldwide shipping possible SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new build project, with complete FAT, PED compliance and GMP documentation. Large-volume BRINOX 30,000 L pharmaceutical process vessel in new plant quality incl. saddle support – immediately available

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ferwood Code: R21001600 - Manufacturer Code: 573606/14 - Condition: New - Functionality: Fully functional - Compatible Machine: BORING MACHINE BST100 - If interested, we offer overhaul services; please contact us. Codpfxevu Uyvs Agtjgt

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ferwood code: R21001601 - Manufacturer code: 503606/12 - Condition: New - Functionality: Fully functional - Compatible machine: FORATRICE BST100 - If interested, we offer an overhaul service; please contact us. Cedpfxevvac So Agtjgt

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 9.000 l, Oprema: dokumentacija / priročnik, BRINOX 9000 L GMP Washing and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical production facility. Suitable for the production, storage, and supply of process solutions in GMP-regulated environments. Construction and Equipment Cylindrical stainless steel tank in horizontal design End-face process connections Large manway with pressure closure Integrated CIP system with spray ball High-gloss polished internal surface Hygienic, product-contacting connections Multiple measuring and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel feet included in delivery Condition Very good optical and technical condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and auxiliary components are present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Welding Documentation Inspection”, the welding documentation was inspected as part of factory acceptance testing (FAT 01, 23.10.2020). The following were confirmed, among others: Cgodoykkk Hopfx Agtst Identification of welders and weld seam inspectors Welder qualifications per EN ISO 9606-1 WPS and WPQR documentation Proof of shielding gas suitability Documented test welds Spot sample visual inspection without defects Traceability according to material certificates 3.1 The complete welding documentation is included in the Turn-Over-Package. Documentation – Fully Available FAT plan and FAT report Layout and construction drawings P&ID diagrams Calibration protocols Surface and roughness tests Leak test Welding plan WPQR WPS Welder qualifications Borescopy report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital format. Special Features Fully documented GMP version with certified welding documentation and comprehensive quality package. Very well suited for reinstallation in pharmaceutical production plants or validation-required applications.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 9.000 l, Oprema: dokumentacija / priročnik, BRINOX 9,000 L Washing Solution Tank – 316L – Double Jacket – TÜV / PED – As-new Condition Manufacturer: BRINOX d.o.o. Tag-No.: BH6751-BH1001 Package 31 Year of manufacture: 2020 Condition: As-new / unused Technical Data Product type: Washing solution tank Nominal volume: approx. 9,000 litres Product-contact material: 1.4404 (AISI 316L) Design: horizontal construction CE marking: present Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Double jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polished • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Heavy-duty custom fabrication in stainless steel 316L • Large-dimension manhole with pressure-resistant closure • Integrated CIP spray lances / cleaning pipes • Multiple clamp and flange fittings • Instrumentation ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy, industrial-grade construction • External pipe runs and process connections pre-installed • Excellent accessibility for maintenance and inspection The photos clearly show the high manufacturing quality, clean welds, and mirror-polished, product-contact interior surface. Condition • Never used in production • Stock item from project surplus • Interior absolutely clean • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Washing solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production facilities • Sterile liquid processes Documentation – complete and well-structured A comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: Cgsdpfxoykkivs Agtot • EU declaration of conformity and warranty certificates • Reports and EU component verifications • Assembly documentation • Part drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welders’ qualification lists, welding procedure certifications, work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gas • Manufacturer’s qualification certificate • Nondestructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Pressure test record • Dimensional accuracy check • Surface roughness protocol • Surface treatment report • Operating and maintenance manuals (device) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation folder available digitally. Special Feature This is not a standard tank, but a high-quality custom project fabrication built to true pharmaceutical standards with certified pressure design, documented manufacturing, and full PED conformity including TÜV approval. Heavy-duty construction, generously sized connections, and CIP integration make this tank ideal for demanding GMP applications.