Briketi Pritisnite Dnevnik Cepilec nakup rabljenega (325)

Stanje: novo, - two juice trays Rated capacity up to 600 kg/h Motor power 1.5 (2.0) kW (HP) Electrical connection 400V 50 Hz (3-phase) Electrical protection 16 A Length 1890 mm Njdpfx Adob Nc Imoyswb Width 1210 mm Height 1510 mm Intake height 1220 mm Weight 300 kg Frame and juice tray material made of 1.4301 / AISI 304 Pressing force 24 t Pressing pressure 380 bar Juice yield up to 75% Juice outlet connection Ø30 mm Juice outlet height 420 mm Scope of delivery: 18 press cloths 80x80cm, 20 press racks made of acacia wood 50x50cm

Stanje: novo, Rated output up to 300 kg/h Motor power Drive motor: 0.37 kW (0.5 HP), Washing system motor: 0.12 kW (0.16 HP) Electrical connection: 400V 50Hz (3-phase) Electrical fuse protection: 16 A Length: 1280 mm Width: 870 mm Height: 1350 mm Feeding height: 1265 mm Belt width: 350 mm Belt length: 4900 mm Working width: 240 mm Working height: 0–50 mm (infinitely adjustable) Weight: 350 kg Material: 1.4301 / AISI 304 Juice yield: up to 75% Belt speed: 2 m/min Contact time: 1 min Nwedpfeb Nc Shox Adyeb Water consumption for cleaning: 2 l/min Wastewater connection: Ø48.3 mm Juice outlet connection: 1" Juice outlet height: 420 mm Wastewater outlet height: 120 mm Pulp discharge height: 700 mm

Stanje: novo, Rated output up to 600 kg/h Motor power 1.5 (2.0) kW (HP) Electrical connection 400V 50 Hz (three-phase) Electrical fuse protection 16 A Length 2080 mm Width 1030 mm Nwedpeb Nc N Ujfx Adysb Height 1450 mm Feed height 1220 mm Weight 295 kg Material: frame and juice tray in 1.4301 / AISI 304 stainless steel Pressing force 24 t Pressing pressure 380 bar Juice yield up to 75% Juice outlet connection Ø30 mm Juice outlet height 400 mm Scope of delivery: 18 pressing cloths 80x80 cm, 20 pressing inserts made of acacia wood 50x50 cm

Stanje: novo, Nominal capacity up to 3,000 kg/h Drive motor power 2.2 (3.0) kW; washing system motor 0.37 (0.5) kW (HP) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Length 3,035 mm Width 2,080 mm Height 1,690 mm Intake height 1,690 mm Belt width 1,200 mm Belt length 9,950 mm Processing width 900 mm Processing height 0-65 mm (5 levels) Weight 2,500 kg Material 1.4301 / AISI 304 Juice yield up to 75% Belt speed 0.5-3.5 m/min Contact time 2-11 min Water consumption for cleaning 6 l/min Wastewater connection Ø76.1 mm Juice outlet connection 1½ " Juice outlet height 400 mm Wastewater outlet height 250 mm Pomace discharge height 880 mm Scope of delivery: high-pressure cleaner, compressor Nwjdpfx Adob Nt Irsysb

Stanje: novo, Working width: 3,500 mm Working height: 2,300 mm Number of pressure cylinders: 4 pcs. S&S Frame Press Type RP 2000 – CE version Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment includes central pressure beam, angled window device, counter profiles for single-part production, and much more! Request our complete price list! Description: Robust frame welded construction made of thick-walled special profiles, sliding carriages, and pressure beams with 50 mm hole pitch. Continuous left-side abutment for width pressing, lower abutment on two levels. Nedpsd Ih H Ssfx Adyowb Vertical pressure cylinders on special pressure beams with single-hand quick adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure sustained absorption of high pressing forces. Quick and smooth width adjustment via ball-bearing guide carriage with central locking, fixing in 50 mm increments. Upper horizontal pressure cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal pressure cylinder with centering bores for both abutment levels, no weight compensation. Abutment and pressure plate depth 100 mm. Pressure plate and support width 130 mm. Machine controlled electro-hydraulically, with 2 vertical pressure cylinders, Ø 50 mm, stroke 120 mm, single-acting, with weight compensation and single-hand quick adjustment; 2 horizontal pressure cylinders, Ø 40 mm, stroke 120 mm, double-acting with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 100 bar corresponding to 400 to 2,000 kg pressing force vertically; powered by 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data according to manufacturer without guarantee, images may show optional equipment!)

Stanje: novo, Working width: 3,500 mm Working height: 2,300 mm Number of pressing cylinders: 4 pcs. S&S Frame Press Type T 35 – CE Version ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment: center pressure beam, tilting window device, counter profiles for individual part production, and much more! Request the complete price list from us! Description: Robust frame welded construction made of thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side support for wide-veneer pressing; lower support on two levels. Nwsdpjd Ih H Nofx Adysb Vertical pressing cylinders mounted on special pressure beams with single-hand rapid adjustment and weight balance, height adjustable in 50 mm hole increments. Long sliding carriages ensure sustained absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing carriages with central locking, fixation in the 50 mm hole grid. Upper horizontal pressing cylinder continuously height adjustable and equipped with weight balance. Lower horizontal pressing cylinder with centering holes for both support levels, without weight balance. Support and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Electro-hydraulic machine control, with 2 vertical pressing cylinders d = 60 mm, stroke 120 mm, double-acting, with weight balance and single-hand rapid adjustment; 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm, double-acting, with weight balance; 2 manual control valves, manometer, 1 pressure regulating valve from 20 to 130 bar equating to 550 to 3,500 kg vertical pressing force. With 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data according to manufacturer, subject to change. Image may show optional equipment!)

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Nwjdpfx Ajd Rzc Rodyjb Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: rabljeno, Leto izdelave: 1999, Pressing force 250 tons, currently disconnected and ready for transport, table size 1.50 x 1 m, good condition Nsdjwvbilepfx Adyowb

Stanje: novo, Hydraulic cylinder replacement cylinder stands Chamber filter press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats. Nwjdpfxed Hgahs Adyeb

Stanje: pripravljen za uporabo (rabljen), System: Used chamber filter press Design: Side-bar guided Application: The filter press was last used for bentonite dewatering Filter plate size: 800x800 mm Number of chambers: 80 Filter plates: PP (polypropylene) Filter cloths: Optionally available and adapted to specific media Discharge: Open Effective filter area: approx. 88.48 m² Nedsd E Dgkepfx Adyewb Press volume: approx. 1272 dm³ Plate pack length: approx. 4656 mm Filtration pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate clamping: Electro-hydraulic plate closure Plate shifting: Manual Dimensions (LxWxH): approx. 5300 x 900 x 1040 mm Weight: Filter press approx. 4 t Base frame: Optionally available, dimensions LxWxH 8000 x 1050 x 2020 mm (collapsible) Weight: Base frame approx. 5 t Control cabinet: Yes Pump technology: Included Accessories: Mixing tank optionally available as special accessory, size 3.00x1.50x2.20 m Special services: Refurbished service available on request. The system undergoes a service check or complete overhaul prior to delivery. On these units, we offer a warranty of 6 to 12 months. Purchase or rental: Inspection of the units by appointment at our premises. Are you interested in renting or purchasing this system? Please contact us; we are happy to assist you.

Leto izdelave: 1993, Stanje: rabljeno, Bending length: 3,000 mm Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Nsdpfokh Niqex Adyswb Throat depth: 220 mm Total power requirement: 15 kW Machine weight: 11,000 kg

Stanje: rabljeno, Leto izdelave: 2000, For fully automatic assembly of frame components. Frame external dimensions: min. 120 x 120 mm Nwedped H Irfjfx Adyob max. 1050 x 2,500 mm 2 heating rails

Stanje: rabljeno, Dimensions: 3,000 mm x 1,200 mm Nedpsd Hwwujfx Adyewb - without stops - without pressing cylinder

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, skupna masa: 100 kg, skupna višina: 1.000 mm, barva: rdeča, neprekinjen delovni tlak: 210 letvica, največji navor vretena: 1.800 Nm, Oprema: hidravlika, Conical Splitter / Excavator Log Splitter / Drill Cone Splitter / Wood Splitter KS5 Drill Cone 200x400 – Made in Germany The robust conical splitter for mounting on mini excavators, excavators, wheel loaders, tractors, forwarding trailers, and many other applications. The drill cone can be exchanged for various attachments such as root cutters, earth augers, compost screens, concrete mixing drums, weed brushes, and many more implements. The cone splitter consists of a highly durable drive unit and the drill cone (splitting cone). The drill cone is fully hardened—not made from unhardened steel like many other manufacturers. Conversion to different attachments can be carried out with just a few steps. • Conical splitter • Root cutter • Earth auger • Weed brush • Sweeper • Power harrow NO CHINESE PRODUCTS! WE MANUFACTURE IN GERMANY! THE ideal multipurpose tool for forestry professionals, farmers, landscapers, DIYers, and professionals. Total length 600 mm plus attachment and quick-change system Universal applicability in construction, forestry, agriculture, and landscaping For splitting heavy firewood or wood for wood chips For drilling earth holes for posts, plants, and much more For removing root stocks and tree stumps For cleaning ditches and paved surfaces For levelling garden areas and achieving a fine soil structure All work can be conveniently performed from the excavator without additional assistance. The very solid and robust steel construction ensures durable and heavy-duty operation. The shaft is additionally supported by two robust tapered roller bearings, both for tension and compression, in addition to the motor. The roller bearings are lubricatable for extended service life. A high-performance HMT 500 hydraulic motor provides up to 1,800 Nm of torque for efficient operation, from 25 l/min up to 125 l/min and 210 bar pressure. Weight: 70 kg Nwsdpfxeuph Uxe Adyob Includes: • Drive unit with powerful HMT hydraulic motor, weight 70 kg • Drill cone with point Ø 200 mm, 270 mm/400 mm long, front side 6xM16 threads LK173 Total length: 270 mm + cone tip 130 mm = 400 mm Diameter: 200 mm Weight: 30 kg Total weight: 100 kg

Leto izdelave: 2025, Stanje: novo, Small rotary tablet press SPT-TPL 200 (suitable for small scale production); Touchscreen and PLC control platform; HMI system; The machines conform to GMP regulations and are CE certified; Number of stations (Max.): D=13 | B=16 | BB=19 1. Max. tablet output per hour (T/h): 46,000 | 57,000 | 68,000 2. Max. tablet diameter - Round (mm): 25 | 16 | 13 - Shaped (mm): 25 | 19 | 14 Nwsdpjdy Dzijfx Adyob 3. Max. tablet thickness (mm): 8.5 4. Max. main compression force (t): 5 5. Max. pre-compression force (t): 1 6. Dimensions (mm): 600 x 1106 x 1705

Leto izdelave: 2025, Stanje: novo, Rotary Tablet Press SPT-TP 400 with high production capacity; Touch screen, PLC Control Panel; HMI (Human Machine Interface); SPT-TP 400 Number of Stations (max.): Nodpfjdy Dzrex Adyjwb D = 30, B = 36, BB = 45 1. Max. tablet output/hour: T/h: 125,000 (D), 170,000 (B), 215,000 (BB) 2. Max. tablet diameter (round), mm: 13 (D), 16 (B), 25 (BB) Max. tablet diameter (shaped), mm: 14 (D), 19 (B), 25 (BB) 3. Max. tablet thickness, mm: 8.5 4. Max. main compression force, t: 10 5. Max. pre-compression force, t: 2 6. Dimensions, mm: 1000 x 1230 x 2000

Stanje: rabljeno, Length each: 2045 mm Nodpfscbnwcjx Adyswb (1 tool with light, 1 tool with heavier rust pitting)

Leto izdelave: 1972, Stanje: rabljeno, Working length up to: 3900 mm Hydraulic drive: 220/380 V, 1400 rpm, 0.75 kW Space requirements: 600 x 4650 x 1000 mm Weight: approx. 250 kg Nedpfxjbnnyis Adyowb in mobile version

Stanje: rabljeno, številka stroja/vozila: 478, Pressing force: 36 t Nodpobb Tguofx Adyewb Maximum installation height: 135 mm electrical connection: 380 V, 7.5 kW Space requirement: 1700 x 700 x 2150 mm Weight: 1800 kg

Stanje: dober (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 150224, Ponudba 25302 Nsdpexl Rvdjfx Adyewb Tehnični podatki: - Tlačna moč: 160 t - Delovna širina: 3200 mm - Prostor med stebri: 2700 mm - Izrez: 350 mm - Hitrost približevanja: 80 mm/sek. - Delovna hitrost: 9 mm/sek. - Hitrost vračanja: 85 mm/sek. - Hod bata: 160 mm - Moč motorja: pribl. 12 kW - Potreben prostor: pribl. Š 3300 x V 2550 x G 2100 mm - Teža: pribl. 9700 kg - z: - Nihajna roka – upravljalna plošča za stiskalno globino + zadnji omejevalnik - Motoriziran zadnji omejevalnik z ročno nastavljivimi omejevalnimi prsti - 4-stranska univerzalna matrica, koničasto orodje - Dvoročno upravljanje, nožni pedal - Svetlobna pregrada

Stanje: novo, - New - Description: - Vertical design for splitting short and meter-length timber - Sturdy and robust construction - Shock and scratch resistant due to high-quality powder coating - Quick, tool-free adjustment of the splitting height - Low base plate allows for easy, fatigue-free loading of large logs - Phase inverter included with all 400 V models - Convenient transport using the manual towing drawbar, thanks to the standard chassis with large pneumatic wheels and additional support wheel Nwodpevxr Ryofx Adysb - Space-saving storage thanks to the easily lowerable cylinder - High-performance industrial hydraulic system - Two-hand safety control - Comes with log holding device Technical Data: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 282 kg Drive PTO shaft speed: 540 rpm Machine Data Maximum splitting force: 23.4 t Minimum log length: 560 mm Maximum log length: 1100 mm Minimum log diameter: 80 mm Maximum log diameter: 350 mm Hydraulic System Hydraulic oil tank capacity: 24 l Item no. 5981023

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), Pneumatic punch Nwodpfsff Apwsx Adyeb

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 91426, Offer 25227 Nwjdpfx Adjwvih Nsyjb Technical Specifications: - Pressing force: 150 t - Working width: 3600 mm - Distance between columns: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustment range of fixed stops: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirements: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Equipped with: - Swivel arm – operator console with ATL 550 controller - For pressing depth + rear stop - Motorized back gauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch + gooseneck tool - Two-hand control console, foot pedal,

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: 189, Offer 23480 Technical Data: - Max. working length: 3050 mm - Frame gap: 2550 mm - Max. pressing force: 150 t - Throat depth: 300 mm - Ram stroke: 150 mm - Stroke speeds: - Downward idle speed approx.: 100 mm/sec - Upward speed approx.: 92 mm/sec - Downward pressing speed approx.: 10 mm/sec Nwedpeq R T R Djfx Adyob - Total drive power: 15 kW - Required space approx.: W 3600 x H 2700 x D 2100 mm - Weight approx.: 9000 kg - Including: - Motorized backgauge with stop fingers - Segmented top tool + universal V-die - 2 material supports - Two-hand control panel with foot switch

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: 51756, Offer 25200 Technical Specifications: - Pressing force: 200 t - Working width: 3100 mm - Clearance between uprights: 2600 mm - Table width: 180 mm Nwodswvipgjpfx Adyjb - Throat depth: 300 mm - Installation height: 450 mm - Approach speed: 80 mm/sec - Working speed: 9 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Drive: 400 V / 18.7 kW - Space required (approx.): W 3300 x H 2950 x D 1900 mm - Weight (approx.): 10,500 kg - Including: - Adjustment for press depth + press force - Motorized backgauge with handwheel fine adjustment - 4-way universal die – gooseneck punch - Two-hand control panel, foot switch