Brandt Kdf 530 C nakup rabljenega (93)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Edge bander Brandt O KDF 430 C Kljdsrxcbkepfx Af Nol Year of manufacture: 2008 Technical condition: very good Technical specifications: - Power supply parameters: 400V 50Hz, max. 19A - Max. edge thickness: 8 mm - Max. panel thickness: 60 mm - Max. edge thickness (in rolls): 3 mm - Feed speed max: 11 m/min - Electric height adjustment: yes - Glue system: granulate, lower glue pot - Pre-milling unit: yes - End trimming saw: 2 motors - Straight and radius trimming units: 1 - Corner rounding unit: 1 motor - Scraping unit: Profile scraping, Flat scraper - Buffing/polishing unit: yes - Edge magazine: yes - Positioning units: NC axes - Execution: right-hand machine - Machine length: 4,860 mm

Stanje: rabljeno, Ambition 1430 Posoda za lepilo: Zaloga v Združenem kraljestvu - £500 Osebni prevzem ali dostava po dogovoru Rezervna posoda za lepilo za stroje Brandt Ambition serije 1400 / KDF 430. Kledpfx Ajwyxq Ief Nol Posoda za lepilo je združljiva s stroji, opremljenimi s predtalilno enoto. Posoda v dobrem stanju, pripravljena za uporabo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Edge banding machine Brandt KDF 530 C with pre-milling, corner copying, two scraper blades and Riepe spray systems. A video of the machine in operation can be provided upon request. The machine is highly automated. Edge thickness: approx. 0.4 – 8 mm Workpiece height: approx. 10 – 50 mm Feed speed: approx. 11 m/min Kljdpfxoxd Duds Af Nel Soundproof hood Extendable workpiece support Extraction connection: 1x 200 mm, 1x 100 mm, including the pictured piping PC16 control unit with color display for easy machine operation Units: Top pressure manual adjustment with SIKO counter Infeed fence manual adjustment with SIKO counter Riepe separating agent spray system Pre-milling unit with Leitz Whispercut diamond cutters, resharpened Gluing unit switchable for with or against feed direction Pressure zone with 3 rollers Cross-cut saw with 2 motors, programmable for straight or beveled cuts Combi milling unit with motorized lateral adjustment Radius scraper R2, pneumatically adjustable Corner rounding unit R2 with diamond cutter, 1 motorized, pneumatically adjustable between thin and thick edge Glue joint scraper pneumatically retractable with large roller Riepe cleaning agent spray system Buffing unit Hood locking CE marking Operating manual as folder and CD All indexable inserts on the milling units and scrapers have been renewed or rotated, saws sharpened, pre-milling cutters resharpened, buffing wheels renewed. The machine is thus immediately ready for operation. Only the diamond cutter on the profile milling unit has not been replaced, but is still sharp. Minor paint touch-ups carried out. Approx. 3500 operating hours. The condition of the machine speaks for itself. Occasionally, the computer reboots during operation (mostly at high room temperatures). This has never been a problem for us – you can continue working during the reboot. Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1900 kg You are welcome to inspect the machine by appointment at our site. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this seller”.

Stanje: rabljeno, številka stroja/vozila: 007517, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing unit: yes Klsdpfxewuz E Re Af Nel Multifunction unit: yes Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs

Stanje: rabljeno, številka stroja/vozila: 006216, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Kledpeiyu Ibsfx Af Njl Jointing milling: yes Multifunctional unit: yes Top milling unit: yes Max. feed speed: 18 m/min

Stanje: rabljeno, številka stroja/vozila: 007251, Type of applied edging: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Joint trimming: yes Multifunctional unit: yes Max. feed speed: 20 m/min Klodstvrf Topfx Af Nol Maximum panel thickness: 60 mm Processing units: 8 pcs

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Dodatna oprema: - Enota za obrezovanje spojev - Enota za lepljenje - Enota za odrezovanje - Enota za predrezkanje - Enota za oblikovno obrezovanje - Rezila za profilno postrganje - Rezila za površinsko postrganje - Polirna enota - Enota za utore Ta robna lepilka BRANDT KDF 890 2CU je bila izdelana leta 2011. Opremljena je z enoto za obrezovanje spojev, enoto za lepljenje, enoto za odrezovanje, enoto za predrezkanje, enoto za oblikovno obrezovanje, rezili za profilno postrganje, rezili za površinsko postrganje, polirno enoto in enoto za utore. Izkoristite priložnost za nakup te robne lepilke BRANDT KDF 890 2CU. Kontaktirajte nas za več informacij. Kjdox D N T Eepfx Af Noll Vrste uporabe: Robno lepljenje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, I am selling a fully equipped edge banding machine BRANDT Optimat KDF 650 C, year of manufacture 2010: Configuration: - Infeed fence manually adjustable - Pre-milling manually adjustable Kledpfx Afeu E E D Do Nol - Edge banding with EVA glue - Pressure zone for material adjustable via servomotor - End trimming saws pneumatically adjustable - Top and bottom radius milling adjustable via servomotor - Corner rounding unit 2-motor, manually adjustable - Radius scraper R2 pneumatically retractable - Flat scraper - Polishing brushes - Power Control PC20 operating panel Working height adjustable via servomotor Material height: 8 - 60mm Edge material thickness: 0.4 - 12.0mm Feed speed: 11/14m/min Total length including feed table: 5860mm Total weight: 2600kg 2 additional glue pots included Comes with complete documentation and CE certificate. Very good condition, fully functional!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, REGENERATED SINGLE-SIDED EDGE BANDER BRANDT MODEL: AMBITION 1650 FC Machine fully regenerated New feed blocks, new rollers, overhauled units, complete set of new tools, overhauled glue pot, and much more SPECIFICATION, EQUIPMENT, DEVICE FEATURES: JOINTING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A12 CROSS CUTTING UNIT BEVEL/STRAIGHT 2 X 0.35 KW COUNTER-ROTATING MILLING UNIT 2 X 0.55 KW Kledpjphnzajfx Af Nol FORMING UNIT 2 X 0.35 KW WD 60 PROFILE SCRAPER WITH QUICK-CHANGE HEADS, FREE SPACE GLUE LINE SCRAPER POLISHER - Feed speed: 8 – 18 m/min - Max feed speed with contour cutter: 11 m/min - Max feed speed with forming cutter (in combination with VKNR 4839): 14 m/min - Working height: 950 mm - Pneumatic connection: min. 6 bar - Total length: 5,760 mm

Stanje: dober (rabljeno), Leto izdelave: 2009, Edge banding machine Brandt KDF 891, serial no. 0-261-04-5551, year of manufacture 2009, equipped with Brandt Power Control PC20+ control unit. Includes Ligmatech return unit ZHR 05/R/085, year 2009, serial no. 0-305-06-2999. The transport belt is approximately 9 meters long with a belt width of approx. 80 cm. Kedpfx Afjv Rvp Re Noll

Stanje: rabljeno, številka stroja/vozila: 006710, Tip nameščenega roba: tanka roba, močna roba, masiven les, furnir Sistem lepljenja: EVA, vroči zrak Spojno rezkanje: da Večnamenska enota: da Največja podajalna hitrost: 11 m/min Kjdpsqy Em Tefx Af Nell

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 2.560 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.760 mm, višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, vrsta nastavitve višine: električni, višina plošče: 60 mm, Brandt 1650 Highflex with Return Conveyor and PU Glue Box – Top Condition Year of Manufacture: 2010 Ksdpfovnwf Uex Af Nsll Operating Hours: 2,587 h Total Edge Length: 216,000 m Maximum Edge Thickness: 12 mm Maximum Panel Thickness: 60 mm Maximum Roll Material Thickness: 3 mm Minimum Workpiece Width: 70 mm Feed Speed Max: 18 m/min Stepless Feed Adjustment Motorized Height Adjustment Adhesive System: Granulate Pre-melting Tank BRANDT Glue System: QUICKMELT KD 2 x PU Glue Pots Strip Magazine Jointing Milling Unit Trimming Saw Unit with 2 Motors Flush/Radius/Chamfering Stations: 1 Corner Copying Unit with 2 Motors Scraper Unit Profile Scraper, Flat Scraper Buffing Unit Synchronized Units NC Axis/ Axes Design: Right-Hand Machine Machine Length: 5,760 mm Conformity Marking: CE Marked Return Conveyor: Ligmatech Boomerang PU Glue Box Machine is still in operation – inspection welcome, available upon arrangement No warranty Collection only, forklift available Net price for edgebander: €26,000 plus VAT Net price for panel return conveyor: €7,000 plus VAT Machines can also be sold separately Price negotiable

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, This BRANDT Optimat KDF 550 was manufactured in 2008. It has a machine length of 5,860 mm, a power requirement of 11.5 kW, and weighs 2,600 kg. With a workpiece thickness of 8 to 60 mm and an edge thickness of 0.4 to 8 mm, it is ideal for precise edge banding operations. Check the availability of this BRANDT Optimat KDF 550 edge banding machine. Contact us for further information. Machine Advantages Kljdpfjyaqagox Af Njl Technical Specifications and Machine Benefits • Power requirement: 11.5 kW / weight: 2,600 kg / machine dimensions (LxWxH): 5,860 mm x 1,560 mm x 2,300 mm • Feed speed: 11 m/min (optionally 14 m/min) • Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm • Electrical connection: 400 V – 3 phase – 50 Hz / pneumatic pressure: 6 bar / noise emission level: 80... 87 dB(A) • Extraction diameter: 1 × 120 mm / 2 × 100 mm / roller spacing: max. 3.0 × 45 mm / 0.8 × 65 mm • Inspection possible. The machine is in good condition and was only used in single-shift operation.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Brandt Edge Bander Type: Profi KDF 670 Single-sided edge banding machine in right-hand, workshop-appropriate configuration for hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt adhesive, suitable for processing PU adhesive granulate in compliance with adhesive processing regulations. Infrared activation of hot-melt adhesive Automatic edge magazine for coil material for thick PVC/ABS Heavy-duty pressure zone Centrally adjustable top pressure Control panel at machine infeed PC 16 electronic controls Technical Data: Edge thickness: 0.4 - 8 mm Coil separation max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tooling set R=2 mm (can be exchanged for R=3 mm) Quickmelt adhesive unit Motorized height adjustment of top pressure - PC 16 Adjustable infeed fence Program-controlled infeed fence adjustment Additional unit for laminate overhang Program-controlled pressure zone Release agent applicator, workpiece Jointing cutter unit Set of jointing cutters, diamond-tipped End trimming unit, chamfer/straight 0 - 15 degrees Pneumatic adjustment for end trimming (chamfer/straight) Flush trimming unit Pneumatic adjustment of trimming unit Pneumatic 2-point adjustment vertical tracing rollers Jointing unit 0 - 25 degrees, synchronized flush trimming Radius cutter set (can be swapped for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment side tracing rollers Profile trimming unit, top and bottom - For profiling/flush trimming of leading/trailing edges on post- and softforming components, as well as corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment of scraper Flat scraper for glue joint Cleaning agent applicator, workpiece Buffing unit with 2 motors Electrical and mechanical preparation for connecting edge banding machine to Ligmatech part return systems ZHR01/ZHR02/ZHR15 Weight: 3000 kg Total connected load: 15 kW Length: 5880 mm Location: ex works, customer site - Available immediately - Machine must be dismantled by the buyer Kedpjx Nrtnsfx Af Noll

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Brandt Optimat KDF 420 robna lepilka Krmilnik Powercontrol PC 20 Debelina nalepka 0,4-8 mm Višina obdelovanca 8-60 mm Predhodna obdelava z DIA rezkarji Odbijanje robov Ravno in radijsko rezkanje Radijski strgalo Ploščati strgalo Polirna enota Dolžina stroja 4360 mm Navodila za uporabo in orodje Letnik izdelave 2008 Cena 15000,- Klodpex Dzw Njfx Af Nel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Brand KDF110 Optimat Ambition – only 1,150 operating hours Make: Brandt Model: KDF 110 Year of manufacture: 2012 Serial No.: 0-261-20-6960 Control: Easy Control 10+ non-contact distance control, feed-regulated with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / workpiece guide: Central control, 2 roller tracks Jointing unit: 2 x 0.75 kW 200 Hz, including joint cutter set in DIA version, manual positioning via Siko counting dial, max. 3 mm stock removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing unit for hotmelt adhesive and PU application option, magazine, pressure zone with electro-pneumatic 2-point positioning via central control Pressure zone: 1st roller powered, 2 free-running rollers for excellent and consistent compaction End trimming unit: 0.18 kW, 12,000 rpm Milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotation, 3-position setting for chamfer/radius (R2), overhang and straight edges. Max. 3 mm edge thickness with Siko counting dial Profile scraper: max. 3 mm edge thickness Surface scraper: Reversible knife Chain width: 80 mm Edge material (roll): 0.4 – 3 mm End trimmer device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: for workpiece thickness 8–22 mm: 70 mm; for 23–40 mm: 120 mm (dependent on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed rate: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Klsdpfjxvirfox Af Nol Total length: 3,672 mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Splošni podatki Teža stroja: 2600 kg Višina stroja: 2300 mm Dimenzije Dolžina stroja: 6060 mm Kodpjx E Eggefx Af Njll Ta obdelovalni stroj za lepljenje robov BRANDT OPTIMAT KDF 670 je bil izdelan leta 2005. Opremljen je s celovitim naborom obdelovalnih enot, vključno s predhodnim rezkanjem, nanašanjem lepila, podajanjem in rezanjem robnih trakov ter poliranjem. Obdeluje obdelovance debeline od 8 do 60 mm in robne trakove do 15 mm. Hitrost podajanja dosega do 20 m/min za optimalno produktivnost. Preverite priložnost za nakup stroja BRANDT OPTIMAT KDF 670. Kontaktirajte nas za več informacij o stroju. Vrste uporabe Lepljenje robov

Stanje: rabljeno, skupna dolžina: 7.500 mm, skupna višina: 2.350 mm, skupna širina: 1.000 mm, Cena: Na zahtevo - Posebnosti: - Opis: Stroj ni ograjen - Dokumentacija na voljo: Ne - CE-certifikat prisoten: Ne - Transportne dimenzije: 7500mm x 1000mm x 2350mm (d x š x v) - Transportni paketi [kos]: 3 Kodjx Adw Nspfx Af Njll Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetnike Dostava in odkup možna kadarkoli za vse industrijske naprave Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2012, Control: POWER CONTROL PC 20+ Panel height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid edge thickness (mm): 12 Feed speed (m/min): 20 Upper motor-driven rubberized belt Manual infeed guide Klsdpewwk Duefx Af Nol Anti-adhesive unit Straightening unit Bonding with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset end trimming and corner rounding unit with two motors Linear 2-motor rounding unit Edge scraper blade Glue scraper blade Buffing unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DETAILED PHOTOS AND VIDEO AVAILABLE UPON REQUEST; PLEASE CONTACT ME VIA SMS AND I WILL SEND THEM TO YOU. PLEASE DO NOT MESSAGE VIA OLX—CALL OR EMAIL INSTEAD. TECHNICAL DATA: Manufacturer: BRANDT Model: KDF 650 Year of manufacture: 2011 Condition: Used, in very good condition Edging thickness: 0.4–3 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Maximum edge width: 60 mm Maximum power consumption: 21 kW Dimensions (H × D × L): 2300 × 1550 × 5800 mm Weight: 2600 kg Power supply: [230V/400V] EQUIPMENT: - Electrically controlled infeed fence - Relatively rare automatic edge feeder - Pre-milling unit - Glue application unit - Pressure unit - End trimming unit (for straight or angled cuts) - Edge trimming unit (for excess material) - Corner rounding unit - Profile scraper - Flat scraper - Polishing unit - 3 anti-adhesive fluid spray units Kljdpfjxuu N Hox Af Nol TECHNICAL CONDITION: - The machine is fully operational and in continuous use - Regularly serviced by authorized service - Ready for operation - Low hours PRICE: PLN 135,000 net (negotiable); VAT invoice available LOCATION: Bochnia TRANSPORT: Pickup only

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Robna lepilka BRANDT KDF 660 na prodajo! Kedjx Ey D Hjpfx Af Noll Leto izdelave: 2007 Največja debelina robnega traku: 12 mm Največja debelina plošče: 60 mm Največja debelina navitega robnega traku: 3 mm Največja podajalna hitrost: 16 m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, I am selling a fully equipped edge banding machine, BRANDT ProfiLine KDF 790, year of manufacture 2006: Configuration: Kjdpoh U Nzpsfx Af Njll - Infeed fence manually adjustable - Jointing cutters manually adjustable - Edgebanding unit with pre-heating tank - Material pressure zone adjusted by servomotor - End trimming saws pneumatically adjustable - Top and bottom rough trimming manually adjustable - Top and bottom radius trimming adjusted by servomotor - Grooving saw unit bottom side - Corner rounding unit, 2-motor, servomotor-adjustable - Radius scraper R2 pneumatically retractable (second set R1 included) - Flat scraper - Buffing brushes - Separator spray unit at the front - Cleaning spray unit at the rear Working height adjustable by servomotor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min Total length including feed plate: 7,860mm Total glued: 1,650,000 meters Includes complete documentation and CE certificate. Very good condition, fully functional!

Stanje: rabljeno, Leto izdelave: 2016, Power Touch control system (touchscreen system) with 21-inch Full HD video Plate height 60 mm PVC/ABS 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable (NC) Panel support guide with idle function Side roller conveyor with idle rollers for panel support Anti-stick unit Twin-motor rectifier unit Roller holder plate EVA glue application unit with pre-melting unit and glue pot Edge pressure unit for straight profiles with automatically adjustable pressure rollers (NC) End trimming unit with automatic tilt adjustment Twin-motor chamfering unit with adjustment Twin-motor multifunction rounding unit (chamfering + rounding) Edge scraping unit with electronic NC adjustment Glue scraping unit Brush unit Anti-stick unit Kljdowwtpyjpfx Af Nsl

Stanje: rabljeno, Leto izdelave: 2008, POWER CONTROL PC 20+ Plate height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid wood edge thickness (mm): 12 Feed speed: 20 m/min Manual infeed guide Pre-milling unit EVA glue application and pre-melter unit Edge holder plate End trimming unit Double-motor overlap milling unit Double-motor offset chamfering unit with NC adjustment Double-motor rounding unit Edge scraper Glue scraper Brushing unit Kljdpfjw Db Rfox Af Nol

Stanje: rabljeno, številka stroja/vozila: 006719, Tip nameščene obloge: tanka obloga, debela obloga, furnir Lepilni sistem: EVA Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 11 m/min Kledpfeq Awlisx Af Njl