Biesse Rover 346 nakup rabljenega (326)

Stanje: zelo dobro (rabljeno), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps + 2 (endless) screw conveyors for chip removal J06032) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal J06033) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 4 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 4 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal Gjdpfx Ajg Urn Ejh Douh CNC Control (Tooling System software + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the feed conveyors

Stanje: zelo dobro (rabljeno), ONE-SIDED LOADING STATION Upper traverse shiftable 180° (horizontal) Console table with vacuum clamps Lifting platform (internal) with motorized sheet metal roller conveyor Protective grille at the front to introduce the stack of panels Separate control cabinet and operating panel External roller conveyor (on the floor) for feeding the stack of panels into the loading station External motorized roller conveyor (receives the panels) from the loading station, also with belt drive for 90° transfer of the panels. Operating capacity (cycles / min): 12–15 Panel thickness (min/max) mm: 10 – 40 Min. panel dimensions mm: 250 x 320 Gjdpfx Aed Tywgsh Deuh Max. panel dimensions mm: 1200 x 3000 Total connected load kW: 11

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (gantry loader, double station) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electrospindles ISO 30 (each 3.7 kW) with tool magazines with 3 positions each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool holder magazines (revolver) with 56 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor, with turnover unit (180°—top side down) "RBO" Mod. Ribaltatore E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: 2 electrospindles ISO 30 (each 4.5 kW) with 3 tool magazines each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool magazines (chain type) with 60 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles Gujdpegvdkgefx Ah Djh G) Unloading station (gantry double station) "RBO" Mod. Advantage SC

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Guodpfsgk T Ttex Ah Doh Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel Godpfx Ajd Tyvxsh Douh - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Gujdpfx Ahjfz Nans Dsh Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), Complete factory for the production of furniture, consisting of: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel insertion machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side sizing and edge banding line "HOMAG", consisting of: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° rotation transfer (longitudinal/transversal) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° rotation transfer (transversal/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' model Vektor CNC LINE drilling-milling-inserting, consisting of: Hedgehog loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfers KZ2090) Sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge banding magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with stacking infeed "ESSE2" Godpfx Aeh T Dvtoh Djuh KZ2075) Furniture assembly line "TERMOPAK" with throughfeed carcass press KZ2203) Sawing line "SALVADOR" (panel crosscut + splitter) with stacking "ESSE2" KZ2009) Veneer department (double knife veneer bundle guillotine "MONGUZZI", cross-cut shears "MONGUZZI"; splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate KZ2215) Automatic panel storage system "ESSE2" model MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, delivery vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, adhesive applicators, etc.), extraction system, roller conveyors, racking (wall-mounted), forklifts, pallet trucks, and more. Machines are still installed at the user's site and can be inspected by arrangement.

Stanje: zelo dobro (rabljeno), Electronic programmer NC 400 Feed-through motorized conveyor belts (No.) 2 Gedpfslwqrtjx Ah Deuh Horizontal drilling supports (No.) 2 Drilling units per horizontal drilling support (No.) 2 Spindles per horizontal drilling unit (No.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (No.) 6 Drilling units per lower vertical drilling support (No.) 2 Upper vertical workpiece clamps (No.) 4 Continuous screws for chip removal (No.) 2 Digital position display (axis) Total connected load (kW) 27.7 The CNC controller manages the movement (X-axis) of the horizontal drilling supports. The CNC controller manages the movement (Y-axis) of the stops. The CNC manages the movement (Z-axis) of all vertical drilling supports.

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in line) Edging material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Cam pitch (mm): 500 FORMATTING UNIT (per side): - Pre-milling cutter (trimming) AS 10 (5.8 kW) Guodpfx Asu Tg Uqoh Djh - 2 x Hogger DT 10 (5.8 + 5.8 kW) - Spray unit (for liquid anti-adhesive) EDGE BANDING UNIT (per side): - Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edging pressure area (CNC-controlled). Edge magazine for rolls (capacity 6 rolls) - End trimming unit IT 90-S (0.3 kW x 2) 28 m/min. 0 - 25°. PNEUMATIC - Multi-profile milling unit (CNC-controlled) RF 30 (0.65 kW x 2) 0 - 25° Multi-function unit (radius milling and shaping) AR 80 (0.3 kW x 2) 25 m/min - ROTAX Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraper unit (CNC-controlled) RB 30 Flat scraper unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for panels (usable height 80 mm), as a buffer to speed up the work cycle

Stanje: zelo dobro (rabljeno), Longitudinal saw (splitter) for grooving and/or cutting a single panel into two parts - Minimum panel length: 500 mm Guedsu Tqb Uspfx Ah Doh - Maximum panel length: 2,700 mm - Minimum panel width: approx. 300 mm - Maximum panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Maximum feed speed: 50 m/min (4 kW) - Installed total power: 43.2 kW The machine consists of the following units: POS. 1: Milling unit for underside grooving (7.4 kW), max. diameter 300 mm POS. 2: Lower pre-scoring saw (7.4 kW), max. diameter 350 mm POS. 3: Upper pre-scoring saw (7.4 kW), max. diameter 350 mm POS. 4: Lower main saw (splitting blade) (7.4 kW), max. diameter 350 mm

Stanje: zelo dobro (rabljeno), PC control system type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min): 35 - 75 No. 2 horizontal drilling units Dowel insertion systems (with glue injection units) No. 5+5 Max. working width (mm): 3200 Gsdpfx Aod Nuwieh Dsuh Min. working width (mm): 235 No. 6 lower vertical drilling units Drilling units per lower vertical drilling unit (No.): 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 continuous screws for chip removal Total connected load (kW): CNC controls movement (X-axis) of horizontal drilling units CNC controls movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore Godpfx Ajhvah Neh Douh E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Stanje: zelo dobro (rabljeno), Double-sided EDGE BANDING AND FORMATTING MACHINE (First machine in a production line) Edge material (coils) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection: Enclosed cabin Side adjustment of aggregate carrier: manual FORMATTING PROCESSING (for each side): Gjdpfx Ahjt N Ix Re Douh 2 x Hogging unit DT 10 (Kw 5.8 x 2) Free slot for jointing milling unit FS Jointing milling unit ES30 + ER30 (Kw 5 x 2) 0° - 90° Universal milling unit softforming SF 10 (2 x Kw 2.4) 0° - 45° Spraying unit (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Pre-heating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions) mm 800 (Guillotine CI10+CS10+RL10) - Edge magazine for coils (No. 6 compartments) Milling unit RS 10 (Kw 1.3 x 2) Milling unit softforming RF 10 / SF (Kw 0.65 x 2) Multi-profile milling unit RF 30 (Kw 0.65 x 2) Universal milling unit for grooving/rebating and profiling FB 30 (Kw 4.5 x 2) 0 - 90° Multi-profile scraper blade unit RB 30 Flat scraper blade unit RC 05 / Soft Spray aggregates (for polishing fluid) + Buffing unit SZ 30 (Kw 0.37 x 2)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable panel (workpiece), movable working head – Vertical panel (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers for securing the workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: approx. 260 x 40 x 10 Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinet Total connected load (kW): 35 WORKING UNITS: Drilling aggregate with vertical spindles: 1 unit Independent vertical drilling spindles: 24 (7 in X + 17 in Y) Drilling aggregate with horizontal spindles: 2 units Independent horizontal drilling spindles: 36 (9+9 = 18 x 2) Drilling head motor power (kW): 3 x 3 (approx.) Vertical main spindle (milling unit): 1 unit Power vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Revolver type, magazine positions: 10 tool slots Gsdpfxeihfiie Ah Deuh

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW WORKPIECES, min. width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 6 upper vertical workpiece clamps + No. 2 continuous-feed screws for chip extraction CNC control - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); Gjdpfeu Tp Slox Ah Deuh - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 3 upper drilling supports (each with 2.3 HP drilling heads, with various head configurations); - No. 6 upper vertical workpiece clamps - No. 2 continuous-feed screws for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Gujdpfoukhd Aox Ah Djh Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal Gusdpet Ig A Sofx Ah Djh CNC control NC 500 (Software Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT Gjdpjvnq Txsfx Ah Douh - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 pass-through motorized conveyor belts Godeidqd Tepfx Ah Djuh No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles for each horizontal drilling unit (Qty.): 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip removal belt Digital readout of positioning data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts Gusdpfxsidqf Re Ah Djh No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), Electronic machine, CNC-controlled, PC control type NC 500 – Tooling System software No. 2 pass-through motorized conveyor belts – feed speed (m/min) approx. 35 - 75 No. 2 horizontal drilling units Drilling spindles per horizontal drilling unit (Qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling units Drilling spindles per lower vertical drilling unit (Qty) 2 x 1.8 HP No. 3 upper vertical drilling units Spindles per upper drilling unit (Qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 endless screws for chip removal CNC controls the movement (X-axis) of the horizontal drilling units Gsdpfohvi Duox Ah Douh CNC controls the movement (Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axis Y1 and Y2) of the drilling spindles CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC control manages all programming of automatic work cycles

Stanje: zelo dobro (rabljeno), PC control unit type NC 400 (with software for managing work cycles) No. 2 continuous motorized conveyor belts Max. working width (mm): 3200 – Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty): 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit on upper drilling support Gedpfx Aei D D Tfeh Deuh No. 2 upper vertical workpiece clamps No. 2 screws (continuous) for chip removal Digital display for position data (axes) Total connected load (kW): 25 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops. OPTION: front loader (for narrow parts: min. 60 mm – max. 260 mm)

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Guodeu Rc Anspfx Ah Dsh Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Gujdpfeu Rc Hyjx Ah Doh Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: zelo dobro (rabljeno), Flexible N.C.-Automatiklinie zum Bohren, Fräsen und Einsetzen (Beschläge). Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Stachelmagazin (Puffer) für 18 Positionen KZ2047) Übergabestation mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabestation mit motorisiertem Förderband Godeidmkrjpfx Ah Deuh KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabestation mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabestation mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn ebenfalls mit motorisierten Bändern (zum Wenden der Platten um 180° zur Weitergabe an die Montagelinien)