Biesse Rover 20 nakup rabljenega (326)

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE (also SOFTFORMING) with through-feed drilling machines, splitter, and high-speed automatic conveyor technology. Configured as follows: Gedpfx Aettgy Hsh Djuh A) Infeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner C (1) B) 1st Double-sided sizing and edge-banding machine "BIESSE" model Stream SB1 11.0 Softforming C) 1st Rotation station (90° LONGITUDINAL–CROSS) "RBO (BIESSE)" model GPK-1 D) 2nd Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 9.5 E) 2nd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-2 F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) H) 3rd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" model Split 4-84 LT L) Outfeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner SC (2)

Stanje: zelo dobro (rabljeno), Double-sided working machine Guodpjdi R R Refx Ah Doh Can be positioned after a through-feed drilling line (for the automatic processing cycle of drilling and doweling) Electronic control unit – Programmer RT 486 Through-feed motorized conveyor belts (No.) 2 Horizontal boring supports (No.) 2 Dowelling systems (and glue injection units) No. 6 LH + 6 RH Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) Lower vertical boring supports (No.) 4 Drilling units per lower vertical support (No.) 2 x 1.8 HP Upper vertical workpiece clamps (No.) 2 Total connected load (kW) 11.5

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED DESTACKING - Bridge Godjd Rg Dzjpfx Ah Douh Vacuum system (with pump) No. 2 vertical support columns of the upper carrying beam No. 1 horizontal upper carrying beam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with vacuum suction cups, adjustable No. 2 external roller conveyors for stack discharge No. 1 external motorized roller conveyor for stack discharge, also with belt for rotation of panels by 90°. Dimensions approx. 7168 mm Separate electrical control panel Electronic controller OMRON Perimeter safety fencing with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 - 50 mm Min. panel dimensions: approx. 250 x 320 mm Max. panel dimensions: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" Gusdpfxscr U Urs Ah Dsh SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (with carriage gliding on them) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal adjustable metal arms with vacuum suction pads OPTIONAL: No. 2 external roller conveyors (on the floor) for stack input of panels to the loading station No. 1 external motorized roller conveyor (for receiving panels from loading station) Separate electrical control panel Electronic control system Perimeter safety fencing with safety mats Total connected load 17.7 kW Gujdpfxoflc T Se Ah Deh Operating capacity (cycles/min) approx. 16-20 Panel thickness (min/max) approx. 10-50 mm Min. panel dimensions approx. 250 x 320 mm Max. panel dimensions approx. 1200 x 3000 mm

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor Gujdpfscggy Sex Ah Doh - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 Gjdpfxed Nviqe Ah Dsuh VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Stanje: zelo dobro (rabljeno), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps + 2 (endless) screw conveyors for chip removal J06032) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal J06033) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 4 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 4 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC Control (Tooling System software + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units Guedpfxjg Urn Eo Ah Doh CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the feed conveyors

Stanje: zelo dobro (rabljeno), ONE-SIDED LOADING STATION Upper traverse shiftable 180° (horizontal) Console table with vacuum clamps Lifting platform (internal) with motorized sheet metal roller conveyor Protective grille at the front to introduce the stack of panels Guodod Tywgspfx Ah Djh Separate control cabinet and operating panel External roller conveyor (on the floor) for feeding the stack of panels into the loading station External motorized roller conveyor (receives the panels) from the loading station, also with belt drive for 90° transfer of the panels. Operating capacity (cycles / min): 12–15 Panel thickness (min/max) mm: 10 – 40 Min. panel dimensions mm: 250 x 320 Max. panel dimensions mm: 1200 x 3000 Total connected load kW: 11

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (gantry loader, double station) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electrospindles ISO 30 (each 3.7 kW) with tool magazines with 3 positions each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool holder magazines (revolver) with 56 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor, with turnover unit (180°—top side down) "RBO" Mod. Ribaltatore Guodpfx Ajgvdkgeh Deh E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: 2 electrospindles ISO 30 (each 4.5 kW) with 3 tool magazines each. Center B: 2 preinstallations for the addition of 2 more electrospindles. 2 tool magazines (chain type) with 60 positions each. 4 upper drilling units (total: 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Unloading station (gantry double station) "RBO" Mod. Advantage SC

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Gedsgk T Ttspfx Ah Douh No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION Guodpfx Ahjd Tyvxs Deh - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) Gsdefz Nanopfx Ah Deuh No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), Complete factory for the production of furniture, consisting of: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel insertion machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side sizing and edge banding line "HOMAG", consisting of: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° rotation transfer (longitudinal/transversal) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° rotation transfer (transversal/longitudinal) "ESSE2", double loading stations "ESSE2" Gujdpfx Ahjh T Dvto Djh KZ2210) 'BREMA (BIESSE)' model Vektor CNC LINE drilling-milling-inserting, consisting of: Hedgehog loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfers KZ2090) Sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge banding magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with stacking infeed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with throughfeed carcass press KZ2203) Sawing line "SALVADOR" (panel crosscut + splitter) with stacking "ESSE2" KZ2009) Veneer department (double knife veneer bundle guillotine "MONGUZZI", cross-cut shears "MONGUZZI"; splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate KZ2215) Automatic panel storage system "ESSE2" model MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, delivery vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, adhesive applicators, etc.), extraction system, roller conveyors, racking (wall-mounted), forklifts, pallet trucks, and more. Machines are still installed at the user's site and can be inspected by arrangement.

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in line) Edging material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Cam pitch (mm): 500 FORMATTING UNIT (per side): - Pre-milling cutter (trimming) AS 10 (5.8 kW) - 2 x Hogger DT 10 (5.8 + 5.8 kW) - Spray unit (for liquid anti-adhesive) EDGE BANDING UNIT (per side): - Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edging pressure area (CNC-controlled). Edge magazine for rolls (capacity 6 rolls) - End trimming unit IT 90-S (0.3 kW x 2) 28 m/min. 0 - 25°. PNEUMATIC - Multi-profile milling unit (CNC-controlled) RF 30 (0.65 kW x 2) 0 - 25° Guedsu Tg Uqopfx Ah Djh Multi-function unit (radius milling and shaping) AR 80 (0.3 kW x 2) 25 m/min - ROTAX Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraper unit (CNC-controlled) RB 30 Flat scraper unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for panels (usable height 80 mm), as a buffer to speed up the work cycle

Stanje: zelo dobro (rabljeno), Longitudinal saw (splitter) for grooving and/or cutting a single panel into two parts - Minimum panel length: 500 mm - Maximum panel length: 2,700 mm - Minimum panel width: approx. 300 mm - Maximum panel width: 700 mm Godpfou Tqb Ujx Ah Dsuh - Panel thickness (min./max.): 10 / 30 mm - Maximum feed speed: 50 m/min (4 kW) - Installed total power: 43.2 kW The machine consists of the following units: POS. 1: Milling unit for underside grooving (7.4 kW), max. diameter 300 mm POS. 2: Lower pre-scoring saw (7.4 kW), max. diameter 350 mm POS. 3: Upper pre-scoring saw (7.4 kW), max. diameter 350 mm POS. 4: Lower main saw (splitting blade) (7.4 kW), max. diameter 350 mm

Stanje: zelo dobro (rabljeno), PC control system type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min): 35 - 75 No. 2 horizontal drilling units Dowel insertion systems (with glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 Guedpfx Asd Nuwioh Doh No. 6 lower vertical drilling units Drilling units per lower vertical drilling unit (No.): 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 continuous screws for chip removal Total connected load (kW): CNC controls movement (X-axis) of horizontal drilling units CNC controls movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 Gujdpfx Ahshvah Nj Deh C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Stanje: zelo dobro (rabljeno), Double-sided EDGE BANDING AND FORMATTING MACHINE (First machine in a production line) Edge material (coils) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection: Enclosed cabin Side adjustment of aggregate carrier: manual FORMATTING PROCESSING (for each side): 2 x Hogging unit DT 10 (Kw 5.8 x 2) Free slot for jointing milling unit FS Guodpfxot N Ix Rj Ah Doh Jointing milling unit ES30 + ER30 (Kw 5 x 2) 0° - 90° Universal milling unit softforming SF 10 (2 x Kw 2.4) 0° - 45° Spraying unit (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Pre-heating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions) mm 800 (Guillotine CI10+CS10+RL10) - Edge magazine for coils (No. 6 compartments) Milling unit RS 10 (Kw 1.3 x 2) Milling unit softforming RF 10 / SF (Kw 0.65 x 2) Multi-profile milling unit RF 30 (Kw 0.65 x 2) Universal milling unit for grooving/rebating and profiling FB 30 (Kw 4.5 x 2) 0 - 90° Multi-profile scraper blade unit RB 30 Flat scraper blade unit RC 05 / Soft Spray aggregates (for polishing fluid) + Buffing unit SZ 30 (Kw 0.37 x 2)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable panel (workpiece), movable working head – Vertical panel (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers for securing the workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: approx. 260 x 40 x 10 Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinet Total connected load (kW): 35 WORKING UNITS: Drilling aggregate with vertical spindles: 1 unit Independent vertical drilling spindles: 24 (7 in X + 17 in Y) Drilling aggregate with horizontal spindles: 2 units Independent horizontal drilling spindles: 36 (9+9 = 18 x 2) Drilling head motor power (kW): 3 x 3 (approx.) Gujdpfx Ahjihfiio Doh Vertical main spindle (milling unit): 1 unit Power vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Revolver type, magazine positions: 10 tool slots

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW WORKPIECES, min. width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 6 upper vertical workpiece clamps + No. 2 continuous-feed screws for chip extraction Guedpfxeu Tp Sle Ah Djh CNC control - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 3 upper drilling supports (each with 2.3 HP drilling heads, with various head configurations); - No. 6 upper vertical workpiece clamps - No. 2 continuous-feed screws for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control NC 500 (Software Tooling System + Woodmaster) Gedpot Ig A Sefx Ah Dsuh W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction Gjdpfx Aevnq Txoh Douh

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles for each horizontal drilling unit (Qty.): 11 Max. working width (mm): 3200 Gjdpfxoidqd To Ah Douh Min. working width (mm): approx. 205 No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip removal belt Digital readout of positioning data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Gsdpfx Aoidqf Reh Dsuh Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts