NAKLADALEC (ENOKRATNA)

RBO (BIESSE Group) Tornado C 1300

Stanje: zelo dobro (rabljeno), Coating and packaging line with thermoregulated film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of edge protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Reel holders (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross-sealing unit (2500 mm) Iasdegp Diaepfx Af Tel - Maximum usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight components (from 1 to 5 kg) using sealing bar c) Thermal shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm tunnel section) with hot air circulation (heating by electric resistors and fan), installed total power kW ? - Conveyor with metal slats (approx. 1500 mm width) - Maximum usable height 700 mm - Adjustable feed speed from approximately 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION Iaedpjcggy Sjfx Af Tol - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. Iasdpfx Afsdfgg Io Tel B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: Iasdpfx Afsu Afu Re Tjl - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Leto izdelave: 1980, Stanje: dober (rabljeno), Stellite Tipping Machine VOLLMER GF10U Blade thickness: 1 to 4 mm Band saw blade width: 60 to 420 mm Iodpfx Asgxb Ebof Teal Circular saw blades: 300 to 1,200 mm diameter Electric feed drive via geared motor

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Iaodpfxsfi Tg Ho Af Tel Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, 420 mm 2015 Iaodpfjx Hhz Asx Af Tsl Orodja 6-barvni itd.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Proizvajalec / Model: GALLUS EM 280 Tip: 6-barvni flekso tiskarski stroj z UV sušenjem in pretvorbenimi enotami Leto izdelave: 2015 Širina role: n/a Lokacija: Labelpresshop Stanje: Rabljeno – funkcionalno, zelo čisto stanje Konfiguracija Enota — Opis / Podrobnosti 6 × flekso tiskarske enote — Opremljeno z GEW UV sušenjem (6 UV postaj) Isdpfexn S U Hsx Af Tsal 1 × obračalna palica — Nameščena 1 × rezalna enota — Standardna rotacijska rezalna postaja 1 × premikalec etiket — Nameščen 1 × enota za vročo folijo — Možna uporaba tudi za hladno folijo 1 × sitotiskarska enota — Nameščena Odvijalnik/navijalnik — Integriran Sistem za vodenje role — Nameščen CE oznaka — Stroj CE-certificiran UV sistem — 6 × GEW UV sušilcev

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Max. working size (mm): 400 x 300 mm Distance from saw blade to work table (mm): 3–200 mm Conveyor belt width (mm): 385 mm Saw wheel power (kW): 18.5 kW Isdpfji Ay Hqex Af Teal Saw unit gear wheel diameter (mm): 711 mm Feed speed (m/min): 0–12 m/min Hydraulic pressure (kg/cm²): 55 kg/cm² Dust extraction outlet diameter: 102 mm x 2 Saw blade size (L x W x H) (mm): 4572 x 27 x 0.9 mm Saw kerf (mm): 1.5–1.8 mm Overall dimensions (L x W x H) (mm): 3000 x 2250 x 2000 Net weight (kg): 2100 kg

Stanje: novo, Leto izdelave: 2025, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit Iodod H Rf Tepfx Af Teal + €850 for models equipped with a fire extinguisher (Safe System)