Beveling Stroj nakup rabljenega (30.178)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Cjdpfst Dx U Sox Aiqshc Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: novo, Multi-combination machine with aluminium sliding table for sawing, milling, surface/thickness planing and optional slot mortising Torsion-resistant steel/cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodised aluminium sliding table, 10-year SCM warranty on sliding table guides Large crosscut frame with extendable aluminium telescopic fence and fold-away stops With combination saw/miter fence with 45° quick adjustment Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° Helically geared steel infeed roller for consistent wood feed during thickness planing Four spindle speeds, manually adjustable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Equipped with a proven ball contact system, used millions of times Permanently smooth operation due to hardened and ground guides Not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The extraction ports for surfacing and thickness planing are on the same (right) side. The extraction hose can therefore be used from the same side for both planing modes. Helically geared steel infeed rollers for constant and uniform workpiece feed Massive anti-kickback devices for operator safety 3-knife cutter block for optimal planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of the saw blade: 1660 mm Chjdpfx Asiiyppeiqsc Cutting width at rip fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. Table dimensions: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. material removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. tool diameter retractable: 180 mm Spindle speeds: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Extraction port Ø saw blade guard: 60 mm Weight: 430 kg OPTIONS: - Professional fences: EUR 300 Saw fence with quick locking and micrometric adjustment Planer fence 90° ÷ 45°, continuously adjustable - Scoring unit incl. saw blade: EUR 292 - Handwheel with digital readout for thickness table positioning: EUR 129 - Mobility kit: EUR 119 - 2 additional handwheels for aggregate adjustment: EUR 45 - TERSA cutter block, Ø 72 mm: EUR 212 - Xylent spiral cutterhead, 3 rows of knives: EUR 717 - Aluminium slot mortising unit: EUR 390 - 2 stop flaps for crosscut fence: EUR 150

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Chedpfxex Ah A Ao Aiqjc Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Debelina robov: 0,2 – 12 mm Dimenzije obdelovanca: Širina min. 70 mm Višina min./maks. 8 / 42 mm Dolžina min. 160 mm (robovi v trakovih) Dolžina min. 60 mm (z role) Hitrost podajanja: 12 m/min Valj za nanašanje lepila Višina delovne površine: 880 mm Stisnjen zrak: 6 bar, 1/4 palca Priključek za odsesavanje: premer 160 mm Dimenzije stroja (D x Š x V): 5600 x 950 x 1300 mm Teža: pribl. 2200 kg Priključna moč: pribl. 11,5 kW, 400 V, 50 Hz Oprema: - Dvojni pritisk z električno nastavitvijo višine - Avtomatski hranilnik za robove z role, do premera 800 mm - Pnevmatične škarje za robove v trakovih, do debeline 3 mm - Avtomatska vodilna letev Predrezalna enota z 2 visokofrekvenčnimi motorji, 1,5 kW, 12.000 vrt/min Dvojna krožna žaga - 2 visokofrekvenčna motorja, 0,2 kW, 12.000 vrt/min 2 avtomatska položaja = 0 + 3 stopinje Enota za obdelavo robov z 2 visokofrekvenčnimi motorji, 0,7 kW, 12.000 vrt/min Enota za obdelavo ukrivljenih robov - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min Enota za zaokroževanje robov AR2 Chedpfxohy Tlrj Aiqoc - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min, dvostopenjska, dotikalna Strgalna plošča Opomba o rabljenih strojih: • Pridržujemo si pravico do sprememb tehničnih podatkov in prodaje. • Navedene cene so cene ob prevzemu na našem lokalu – brezplačno natovarjanje! • Stroj je očiščen in preizkušen. • Vsi stroji se prodajajo v stanju, v katerem so, brez kakršnih koli jamstev. • Kupec ima možnost, da stroj pregleda na našem lokalu. • Posebni dogovori so možni le v pisni obliki. (Na povpraševanja bomo odgovorili le, če boste navedli svoj naslov in telefonsko številko!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Csdpfec S Di Rjx Aiqshc Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Cododcdwbspfx Aiqohc Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is built in accordance with CE standards. Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Csdpjg Nn E Nofx Aiqehc Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: Chjdpfx Ajdd Hi Ejiqoc - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Premer izvrtine, spremenljiv, mm Število vrtalnih glav, vodoravno: 3 kosi Število vrtalnih glav, navpično: 4 kosi Teža: 1500 kg Dimenzije (dolžina/širina/višina): 4800x1600x2400 mm Širina s podlago: 2300 mm Götzinger Power Drill, tip BF 315 Z Götzinger PowerDrill lahko, odvisno od vrste in izvedbe: Izvrtate luknje za ročaje na ločenem okvirju ali za dokončane krila, z večvretensko vrtalno glavo, z možnostjo hitre menjave, tudi za vrezanje prostora za ključavnico za WC 2 oz. za medstopenjsko prestavo Izvrtate luknje za vogalne ležaje na ločenem okvirju, z večvretensko vrtalno glavo, z možnostjo hitre menjave, usmeritev v vogal z oporo ali po meri (nagibno okno) Izvrtate luknje navpično od zgoraj za okovje, predvrtine za zapah na ločenem okvirju Vrezujete navpično od zgoraj za ročaje, profilni cilinder, 3D-okovje Izvrtate luknje vodoravno z 2 vrtalnima enotama, različni premeri izvrtin, svedri za lesene mozne, na sprednji in bočni strani, lesene klini / podstavki, letve, vogalna povezava, vhodna vrata itd. Vrezujete vodoravno za prostor za ključavnico / okovje itd. Opis stroja Osnovna konstrukcija, stabilna, varjena, linearno vodilo za os X Podlaga mize: 3.000 x 200 mm 6 vpenjalnih cilindrov, pnevmatično, z avtomatskim hodom Choded Ih Hqopfx Aiqec 2 stranska opori za obdelavo na sprednji strani, ročno, vključno/izključno 2 vzdolžni opori, ročno, vključno/izključno Hodi: Os X – 3.000 mm, uporabna dolžina Os Y – 180 mm Os Z – 105 mm Agregati: 1 vrtalni agregat (agregat 1), navpično od zgoraj, vrtalni motor 1,1 kW Število vrtljajev 1.500 - 12.000 vrt/min, 1 vreteno, vpenjalna puša ER 25 1 vrtalni agregat (agregat 2), navpično od zgoraj, vrtalni motor 1,1 kW Število vrtljajev 3.000 vrt/min, z napravo za hitro menjavo vrtalne glave 1 vrtalna glava BKF 3, puše, z možnostjo hitre menjave 1 vrtalna glava BKF 3/2, vogalni ležaj, z možnostjo hitre menjave 1 rezkalni agregat (agregat 3), navpično od zgoraj, rezkalni motor 2 kW, 1.500 - 16.000 vrt/min, vpenjalna puša ER 25 2 vrtalna agregata, vodoravno (agregat 4 in 5), 1,0 kW, 1.500 - 12.000 vrt/min, vpenjalna puša ER 20 1 rezkalni agregat, vodoravno (agregat 3), 2,0 kW, 1.500 - 16.000 vrt/min, vpenjalna puša ER 20 Upravljanje, elektro-pnevmatsko, z 3-osnim upravljanjem (X, Y, Z) NC pozicijski krmilnik, proizvajalec B + R, vnos preko TFT zaslona 10" Stroj, kompleten, z 1 nizom vrtalnih orodij premera 6, 8, 10 in 12, 2 grobo/fini rezkalniki iz trdega kovine, premera 16 V skladu s standardom CE, pripravljen za priključitev Odvodni priključek: 1 x premera 120 + 1 x 80 Električni priključek: 1 x 400 V, 16 amperov Zračni priključek: 1 x 9 mm Dimenzije: D x Š x V = 4,80 x 1,60 x 2,40 m – teža stroja 1.500 kg ----- Skupna cena v zgoraj navedeni izvedbi, dobava iz tovarne: po dogovoru ----- Dodatne možnosti, po dogovoru: - Opora za izvrtavanje na bočni strani, utorna opora, višina se uravna z NC osjo - Spletna povezava z okenskim programom, podatkovni kabel mora biti na voljo na licu mesta (Klaes, Prologic 3E, Adulo) - CNC modul za rolete, krožno rezanje - Modul za oddaljeno vzdrževanje - Rezkalni motor s HSK vpenjalom - Vpenjalno pušo HSK 32 ----- Dodatno zaračunamo stroške prevoza in montaže/izobraževanja (Tehnični podatki po podatkih proizvajalca – brez jamstva!)

Stanje: delavnici obnovljeno (rabljeno), Število rezkalnih vreten: 2 kos. Prislon: da / ne Orodje: da STEGHERR tip KSF-mini, križna rezkalnica ----- Specialna rezkalnica za učinkovito izdelavo križnih spojk. Križna rezkalnica KSF-mini je rezultat dolgoletnih izkušenj podjetja STEGHERR pri izdelavi teh specialnih strojev za izdelavo križnih spojk. Cedpfxszip Nwj Aiqshc Z modelom KSF-mini lahko hitro in natančno izdelujete vse vrste križnih spojev, ki se pojavljajo v praksi. Obravnavati je mogoče tudi že profilirane letve. Natančna izrezava je omogočena, saj se obdelovanec vpne in obdela s treh strani v enem vpetju. Pogon orodja preko dveh trifaznih motorjev; vpenjanje obdelovancev je pnevmatsko. Profilni rezkar je prilagojen širini stega. Žagine liste za izdelavo utora je mogoče s pomočjo distančnih obročev nastaviti na mere profilnega rezkarja. Stroj je zasnovan za maksimalen presek obdelovanca 56 x 46 mm. - Motor 2,2 kW, 380 V, 50 Hz - Pnevmatski tlak 6 bar Vključuje: ----- - Podnožje za mizo - Nožno stikalo - NOVO, ORIGINAL prislonsko letvico z merilno lestvico in premičnim prislonom z nastavitveno optiko, kot je prikazano na slikah. Orodja, kot so prikazana na slikah: 1 kos profilni rezkar 3 žagini listi (za širino stega 10 mm) Mere postavitve približno DxŠxV: 1.330 x 570 x 1.430 mm Teža: cca 150 kg ----- (vse tehnične specifikacije po podatkih proizvajalca, brez garancije!)

Stanje: novo, Number of sanding units: 2 pcs. Sanding width: 290 mm Maximum sanding height: 180 mm LÖWER DoubleSander Solid DSM 3000 ----- Double-sided single workpiece sander for sanding solid wood, such as window scantlings and similar items. Robust premium model featuring long cast iron tables, integrated brushing and finishing stations, and conveyor belt feed. Suitable for continuous heavy-duty work, even with higher material removal rates. - Offset arrangement of top and bottom sanding and finishing units - Direct-driven, rubber-coated sanding rollers for slip-free power transmission - Combination sanding over roller and pad for high stock removal and a consistently flat sanding area - Maintenance- and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and increased abrasive belt life - Forced, pneumatically-controlled belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at tension rollers - Integrated brushing and finishing unit with large sanding dust extractor - Motorized sanding thickness adjustment via precision leadscrews and large linear ball bearing sets on hardened and ground precision shafts, with dust and dirt protection - Stock removal adjustment (bottom) via precision leadscrew with scale ring measurement display (resolution 0.1mm) - Abrasive belt tension with pneumatic cylinder for constant clamping pressure - Abrasive belt change with pneumatic release in seconds - Adjustable belt tracking for belt change - Electro-pneumatic compressed air monitoring - Workpiece infeed safety via contact roller for oversized workpieces - Workpiece transport via calibrated, non-slip, high-traction conveyor belts over heavy-duty 1000 mm-long cast iron tables with superfine planed surfaces and spring-loaded, finely adjustable pressure rollers - Cardan shaft drive for jerk-free, uniform workpiece transport - Feed gear motor with stepless adjustment for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls at workpiece infeed side - Digital thickness display (0.1mm resolution) with modern magnetic band system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 300 mm - Working width: 290 mm - Sanding thickness: 2–180 mm Chodpfx Aieyrty Tsqjc - Two brake motors for main drive: 7.5 kW - Feed motor: 1.0 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units, each 0.37 kW, with fibre brushes D 120 x 300 mm - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2,105 mm (w/o control panel) - Length with control panel: 2,490 mm - Width: 980 mm - Height: 1,910 mm - Weight: approx. 1,650 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE compliant ----- Price for the above-mentioned machine on request! ----- Optional accessories at extra charge: Workpiece air blow-off - Air nozzles positioned above and below at the machine outfeed, pneumatically controlled Abrasive belt blow-off - Through nozzles positioned directly at the radius of the tension rollers within the extraction system, timer controlled, 5 seconds on/off, can be activated separately Disc unit ...

Stanje: novo, Število rezalnih vreten: 2 kos. Opora: 1 da Orodje: da Profilna rezalna glava Stegherr, tip KSF-mini Cjdjyrtzqspfx Aiqshc vključno s standardno oporo z 2 nastavljivima oporama, brez orodja Z napravo KSF-mini lahko hitro in natančno izdelate vse vrste profilnih povezav, ki se pojavljajo v praksi. Natančna izdelava se doseže s tem, da se obdelovalni predmet tridimenzionalno obdeluje v primežu. Pogonski sistem orodja je preko dveh trifaznih motorjev; napetost obdelovalnih predmetov se uravnava pnevmatsko. Profilni rezalnik je zasnovan za določeno širino profila. Žage, ki izvajajo razširitev, so preko vmesnih obročev nastavljive na dimenzije profilnega rezalnika. Nagibna naprava je brez zračnosti. Stroj je zasnovan za maksimalni presek obdelovalnega predmeta 56 x 46 mm. Napetost: Evropa: 400 V (+/- 10%) / 3-fazni / 50 Hz, ZDA: 440 V (+/- 10%) / 3-fazni / 60 Hz Druge napetosti na zahtevo. Navodila za uporabo v nemščini ali angleščini. Podstojek za mizo: 1.070,00 EUR Nožna kontrola: 900,00 EUR Nastavljiva optika: 130,00 EUR Profilni rezalnik v izvedbi z HM-Wepla, na voljo: premeri 5, 7, 9, 11, 13 mm. Cena za kos: 650,00 EUR 1 komplet nadomestnih rezalnih ploščic za profilni rezalnik (= 10 kosov): 190,00 EUR Žaga HM, cena za kos: 170,00 EUR (Pri profilu, na primer 10 mm, so potrebne 3 žage) Nastavitev stroja na orodja, ki jih zagotovi stranka, cena za posamezno orodje: 700,00 EUR Pakiranje v leseno embalažo (primerno za kopenski prevoz): 650,00 EUR Pakiranje na paleto in zavitje s termo skrčljivo folijo (samo znotraj Evrope, ne za zračni prevoz): 340,00 EUR Cena je določena ob tovarni, brez embalaže, brez zavarovanja, ob dostavi znotraj Nemčije pa se obračuna veljavna stopnja DDV ob času dostave. (vse tehnične specifikacije so po navedbah proizvajalca, brez jamstva!)

Stanje: rabljeno, Technical Details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table speed: 0.05–4.5 m/min, stepless Spindle speed: grinding spindle 1780, 2050 rpm Spindle speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2200x280 mm Table swivel range: 9° forwards / 10° backwards Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDER without internal grinding attachment Chjdou Ng Dgepfx Aiqsc - For precision grinding of external (and internal) as well as tapered surfaces. - Infeed of grinding spindle headstock by hand or hydraulically - Table feed hydraulically infinitely variable - Grinding spindle swivels by 60° - Workpiece headstock swivels by 90°, with MK 4 mounting - Tailstock, MK 3 mounting Equipment: - Wheel dressing device - Coolant tank including pump and supply as per description.

Stanje: novo, Stanje: novo Dobavni rok: približno 6 mesecev od naročila Država izvora: Tajvan Cena: 53.400 € Mesečni obrok ob finančnem lizingu: 1.009,26 € Dolžina upogiba: 3100 mm Debelina pločevine (420 N/mm²): 4,5 mm Pogon: hidravlični Maksimalni kot upogiba: 135 ° Dolžina: 4500 mm Širina: 1750 mm Višina: 1950 mm Teža: 5500 kg Hidravlični pogon NC krmilnik za nastavitev kota upogiba Ročni zadnji opornik: 600 mm Neprekinjena konična vodilna letev: 45 ° Prednastavitveni kot: 75 mm Mehanska nastavitev končnega položaja objemalne čeljusti Nastavitev sile objema Oprema v skladu s predpisi CE Cedpfjynm Uiox Aiqjhc ALTERNATIVNO: Različica AMH-K, s DELJENO konično vodilno letevjo 45 ° OPCIJA (CENA NA POVPRAŠEVANJE): NC krmilnik z 2 osmi in 7-palčnim zaslonom na dotik, vključno z motornim zadnjim opornikom 800 mm (Simbolične fotografije)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35 m/min, hitri pomik os Y: 35 m/min, hitri pomik na osi Z: 35 m/min, največja hitrost vretena: 7.000 obr/min, teža obdelovanca (maks.): 15.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, FPT RONIN MOVING COLUMN MILLING MACHINE Heidenhain 530 CNC Control X-axis travel: 8,000 mm Y-axis travel: 1,500 mm Z-axis (vertical) travel: 2,500 mm Rapid traverse: 35,000 mm/min Working feed: 15,000 mm/min Continuous bi-rotary automatic head (TUPC) Spindle taper: ISO 50 Max spindle speed: 7,000 rpm No. 1 ROTOTRANSVERSAL TRT table HYDROSTATIC Table dimensions: 2,000 x 2,000 mm V-axis travel: 1,500 mm Load capacity: 15 tons No. 1 ROTARY TABLE Table dimensions: 1,500 x 1,500 mm Load capacity: 15 tons Tool changer with 80 positions Total installed power: 88.8 kW Equipped with: - Internal high-pressure coolant through spindle 20 bar - External high-pressure coolant at spindle 4 bar Chjdpfx Aiowzxwqjqoc - Chip conveyor - Remote control panel with radio frequency for Heidenhain CNC - Integrated laser probe and software for tool breakage control, tool length and radius measurement - Workpiece measuring and alignment probe USED MACHINE

Stanje: zelo dobro (rabljeno), Prodajamo našo strojno opremo za tampotisk podjetja TampoMark. Proizvajalec: TampoMark Tip: TM-100 Cedpfsz Hiuxex Aiqohc TampoMark TM-100 je pnevmatski tiskalni stroj z odprtim sistemom za barve. Vključno z obsežno dodatno opremo (v kovčku). Na voljo so tudi dokumenti (navodila za uporabo).

Stanje: novo, Leto izdelave: 2024, ALZMETALL – stebrična vrtalna naprava AX 3/S, premer vrtanja v jeklu 40 mm, vrtljaji vretena: 160–2250 vrt/min, kratko vreteno MK3, hod vretena: 120 mm, razdalja od stebra: 293 mm, premer stebra: 115 mm, uporabna površina strojne mize: 514 x 360 mm, z utori tipa T: 2 x 14 mm x 224 mm, razdalja vreteno–miza, min./maks.: 117/701 mm, nastavitev višine strojne mize z ročico, višina stroja brez dodatne opreme: 1840 mm, neto teža: 260 kg. Serijska oprema: glavno stikalo, ki se zaklene motor s termičnim varovalom Chsdpfx Aijz E Sqysqoc gumb za zaustavitev v sili (z blokiranjem) brezstopenjska nastavitev hitrosti zaščita vretena z električno zaščito glavno stikalo desni in levi tek stopnja zaščite IP 54 razred izolacije motorja „F“ (155 °) Barva: DD-strukturna barva, signalno bela RAL 9003, PANTONE 7545c, črna vključno z naslednjimi dodatnimi možnostmi: LED-strojna luč, pozicija 12. Digitalni prikazovalnik globine vrtanja. Nastavitev točke 0 (začetek vrtanja). 5-mestni LED-prikazovalnik, višina znakov 13 mm, pozicija 37.1. Dobavni rok: iz skladišča Waiblingen Beinstein. Stroj si lahko po dogovoru ogledate pri nas.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 1 h, Splošna ocena (1: slabo, 5: kot novo): Novo vozilo Csdezkzn Iepfx Aiqshc ---- Nerabljeno demonstracijsko vozilo! Na voljo le še 1 kos!! Motor: Hatz, dizel Konstrukcija je enaka modelu Bomag BPR 100/80.

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 072-003, teža obdelovanca (maks.): 300 kg, potovalna razdalja osi X: 300 mm, pomik osi Y: 200 mm, pomik po osi Z: 300 mm, skupna višina: 1.940 mm, skupna dolžina: 1.340 mm, skupna širina: 900 mm, vrsta vhodnega toka: trifazni, skupna masa: 910 kg, dolžina mize: 400 mm, višina mize: 300 mm, vhodna napetost: 400 V, kapaciteta rezervoarja: 20 l, vhodna frekvenca: 50 Hz, vhodni tok: 30 A, Oprema: dokumentacija / priročnik, Komplet dodatne opreme: komplet klešč, velikosti od 1 mm do 4 mm. Codpezr D Dnofx Aiqehc

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: BN20XS "Standard", dolžina gredi: 1.064 mm, teža obdelovanca (maks.): 5 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, delovno območje: 70 mm, skupna masa: 30 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, maks. debelina aluminijaste pločevine: 3 mm, širina odprtine vrat: 400 mm, višina odprtine vrat: 350 mm, pomik po osi Z: 100 mm, JEWELliner "XS2" model: "Standard" with 20W CW laser power. - Developed and manufactured in Germany (proven) - Other models, laser powers, and options available on request. Engraving laser – marking laser – laser marking system with “Laser Class 1” protective housing. Our JEWELliner "XS2" marking laser is suitable for marking and engraving all metals, selected plastics, and ceramics. The compact housing size of L50 x W40 x H50 cm allows for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries Sample materials: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon Application possibilities: - Graphic engraving (logos, drawings, hand sketches) - Photo engraving - Barcode (barcode, data matrix, QR code) - Serial number marking - Optional: inner ring engraving (e.g. name, date, symbol, handwriting) - Optional: outer ring engraving (e.g. name, continuous graphic, continuous pattern) - Optional: bangle engraving (inside and/or outside) - Text engraving (straight text, circular text, arched text, text symbols) - Handwriting engraving - Fingerprint engraving - Micro-engraving (micro text, minimum font size 0.15 mm) - Optional: rotary engraving (marking on round or curved surfaces) Compact design—all components are installed in the housing and sufficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS2" (BN20XS2-HR): - Fibre laser unit with deflection head and focus module - Laser Class 1 protective housing with 140 x 100 mm protective viewing window - Manual door opening - Emergency stop switch - 180° field of view of the marking area inside the housing - Electrically adjustable Z-axis - Includes marking software (configurable) - Rotary axis included Technical specifications/data: Laser type: fibre laser CW output power: 20W Available frequency range: 28-64kHz Connection type: USB 2.0 Wavelength: 1064nm Standard lens: F-Theta 163 Marking field size: 70 x 70 mm (smaller sizes possible) Focal range: approx. 1.0 mm Minimum character height: 0.15 mm Minimum line width: 0.020 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L500 x W400 x H500 mm Weight: approx. 30kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your production process. Sample engravings can be produced on request. Codpfxoppxlmo Aiqehc Images and illustrations may vary!

Stanje: rabljeno, Pogon: 30 kW Premer rotorja: 500 mm Codpfxez Hxf Hs Aiqehc Širina rotorja: 1200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Premer kolesa – maks. 820 mm Širina kolesa 300 mm Modul – maks. 8 Modul – min. 0,5 Dolžina vpenjalne površine 865 mm Število zob 10–600 Kot nagiba – maks. +/- 30° Število vrtljajev 1100–2150 vrt/min Premer brusilnega diska 280–400 mm Širina brusilnega diska 84 / 104 Masa obdelovanca maks. 300 kg Masa stroja pribl. 11,5 t Potreben prostor pribl. 6,0 x 4,8 x 2,9 m vključno s filtrom Reishauer AF, diski, prirobami itd. Chedpfx Aisz Hz Rlsqec

Stanje: novo, Stanje: novo Dobavni rok: približno 8 tednov od naročila Država izvora: Turčija Cena: 7500 € Mesečni obrok za lizing: 144,75 € Najbolje prodajan model: 1 Dolžina upogiba: 1050 mm Maksimalna upogibna zmogljivost – konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 90 mm Hitrost valjanja: 6 m/min Moč motorja: 1,1 kW Dolžina: 1630 mm Širina: 700 mm Višina: 1200 mm Teža: 480 kg Csdpfxjwira Ie Aiqehc 3 valji Asimetrična razporeditev valjev 2 pogonjena valja s pomočjo zavornega motorja Nastavitev zadnjega valja z ročnim kolesom Utori za vložitev žice na spodnjem in zadnjem valju KALJENI VALJI Zgornji valj, ki se lahko izklone Desni/levi tek z dvojnim nožnim stikalom Stožčasta valjalna naprava Navodila za uporabo v NEMŠČINI

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 560 kg, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, skupna višina: 1.550 mm, priključek za stisnjen zrak: 6 letvica, natančnost pozicioniranja: 0,01 mm, natančnost ponavljanja: 0,01 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, Polavtomatsko razrezovanje uporab – Osnovni stroj s paralelnim preklopnikom Dinamični uporabni rezalnik LOW 4322 je posebej primeren za srednje do velike količine izdelkov in izpolnjuje naraščajoče zahteve v proizvodnem procesu. Uporabne plošče iz različnih materialov se s pomočjo žaginih in rezkalnih tehnik z malo prahu in napetosti razrezujejo z najvišjo produktivno prilagodljivostjo, natančnostjo in zmogljivostjo. Visoko dinamične linearne motorske osi, orodja in prijemala izpolnjujejo najvišje standarde kakovosti, s čimer zagotavljajo dolgo življenjsko dobo in zanesljivost rezalnika. Izdelano v Nemčiji Polavtomatsko razrezovanje uporab – rešitve po meri Uporabni rezalnik LOW 4322 omogoča hitro menjavo izdelkov ob hkratnem ohranjanju kratkih časov rezanja in rokovanja. Vstavljanje uporabnih tiskanih vezij poteka s paralelnim preklopnikom, prijem in pritrditev s tehnologijo zatičnega vpenjanja, po potrebi v kombinaciji z vakuumskimi priseski. Stroj je opremljen z: • Grednim in kolutnim orodnim razrezovalnim modulom na Z-osi (samodejno vrtljiv 0–90°) • X-Y križni vbodni modul v tehnologiji linearnega motorja z visoko ločljivim merilnim sistemom • Dvojni nakladalni modul, izdelan kot paralelni preklopnik, ločeno levo in desno s pomičnimi vrati • Okvir iz aluminijastih profilov z dvema servisnima vratoma – levo in desno • Osnovni modul standardnega vision sistema za Teach-In programiranje (kamera 400 × 330 mm) • Delovno območje 420 × 330 mm • Samodejna obdelava dolžine rezkarjev (samo v kombinaciji z modulom za gredni rez) • Oddaljeno vzdrževanje/podpora preko oddaljene povezave (TeamViewer) ali s strani stranke • Touch IPC z operacijskim sistemom Windows • Lasersko merjenje osi z dokumentacijo • Ionizacija zraka • Kontrola loma rezkarjev samo za gredne rezkarje • Priprava na vakuumsko vpenjalno tehniko • ESD-zaščitno steklo in drsna vrata Opcijsko je mogoče naknadno ponuditi tudi enoto za odsesavanje prahu. Visoka zmogljivost rezalnika z vgrajenim žaginim ali rezkalnim modulom, polavtomatsko obdelavo dolžine rezkarja, slikovno podprtim Teach-In kamerami in dvema enostavno naloženima napravama za tiskanine se lahko razširi z veliko prilagodljivimi rešitvami in dodatno opremo (npr. vision sistem). Natančna laserska meritev osi pred zagonom je pri vseh linijskih in samostojnih uporabniških sistemih Systemtechnik Hölzer del individualne storitve za stranke. Codpjznr Sljfx Aiqehc

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, hitri pomik os Y: 20 m/min, največja hitrost vretena: 60.000 obr/min, montažni premer: 3 mm, skupna širina: 800 mm, vrsta vhodnega toka: Klimatska naprava, dolžina mize: 320 mm, višina mize: 560 mm, trajanje garancije: 12 meseci, delovna širina: 560 mm, temperatura okolja (min.): 18 °C, okoljska temperatura (maks.): 30 °C, priključek za stisnjen zrak: 6 letvica, delovna dolžina: 320 mm, število osi: 3, The compact table-top version LOW MINI was specifically developed for depaneling small-format series, small quantities of large-format PCBs, and cost-conscious production. PCB materials with remaining tab connections can be quickly and economically separated up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled in all axes, with the milling spindle operating from above. The real highlight of the machine is the easy and straightforward switch of working area from small (320x280mm) to large (320x560mm) format. • Short cycle times due to shuttle operation • X-/Y-axes with linear motor technology • PCB fixation with pin technology • Flexible handling • PCBs with residual tab connections • Milling spindle adjustment with servo technology • Extraction unit Cedpfxjxmfdxo Aiqjhc • Easy operation • Excellent price/performance ratio Manual depaneling – flexible and cost effective The concept of manual depaneling offers significant advantages in terms of flexibility and cost. Medium batch sizes can be quickly and with minimal dust separated using the LOW MINI. The standard version features dual loading with linear motor technology; for enlarging the working area, single-shuttle operation is possible. Ease of maintenance and operation, combined with the outstanding price/performance ratio, provide a comfortable working experience, making the investment in this depaneler economically worthwhile as well. Axis speed: 160mm/s Repeatability: 0.02 mm Separation accuracy: 0.1mm Shank tools: 0.8 - 2.4mm