Dvostranski robni lepilni stroj

MAHROS + STEFANI RUNNER + EVOLUTION

Stanje: rabljeno, številka stroja/vozila: 007662, Pozicija 1: Nakladalnik STEFANI + MAHROS-EVOLUTION SSB + RUNNER Pozicija 2: Obračevalnik plošč STEFANI + MAHROS-EVOLUTION SSB + RUNNER Dusdpfxewuzzfo Afaeu Pozicija 3: Dvostranski robni lepilni stroj STEFANI + MAHROS-EVOLUTION SSB + RUNNER Pozicija 4: Obračevalnik plošč STEFANI + MAHROS-EVOLUTION SSB + RUNNER Pozicija 5: Razkladalnik STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Dedpfxefi Tg He Afaouu Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 Dedpfx Aod Nt Rqofaeuu - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 17.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 560 mm, pomik po osi Z: 720 mm, hitro pomikanje X-os: 100 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: I TNC 530, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 17.000 h, nos vretena: BT 40, število mest v zalogovniku orodij: 60, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Vertikalni obdelovalni center s pomičnim stojalom, 5-osno neprekinjeno delo, z vrtljivo mizo (možnost montaže vodoravno ali navpično) premera 550 mm. Možnost nihajnega obdelovanja (tip menjave palet) z ustrezno pregrado. Opremljen z BLUM laser control NT za nastavitveno meritev. Brezžična merilna tipala za obdelovanec HEIDENHAIN TS 642. Transportni trak za izmet odrezkov. Hlajenje skozi vreteno z visokotlačno črpalko in papirnatim filtrom. Duedpfx Afsy Diabeaju Hladilnik za vreteno linijo. Daljinski ročni upravljalnik HEIDENHAIN.

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Dusdpfx Afodh Tfgeaju Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Univar 15 Unitex 15 Dusdpfx Ash H Iyxjfasu

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: Dedpfxshknbro Afasuu 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Leto izdelave: 1995, stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), The machine has been overhauled many new parts new cables new hydraulic unit The machine has been inspected and is fully functional. Duodpov Ihdzjfx Afaju We can send a video.

Stanje: zelo dobro (rabljeno), Brand: DMTG DALIAN Model: CKE 6180 Z Djdpfx Aju U Htcefajuu Control: FAGOR 8055 iT Turning diameter: 800 mm Turning length: 2,000 mm Height over bed: 400 mm Cross slide travel: 420 mm Longitudinal travel: 1,835 mm Spindle bore diameter: 100 mm Headstock speed: 40–1000 rpm X-axis feed: 0–4000 mm/min Z-axis feed range: 0–8000 mm/min Turret: 4 positions 4-jaw chuck diameter: 400 mm Quill stroke: 260 mm Voltage: 400 V Motor power: 18.5 kW Machine dimensions: 4,500 x 2,000 x 1,800 mm