Beckers nakup rabljenega (193)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, delovna širina: 520 mm, priključek za stisnjen zrak: 6 letvica, vrsta vhodnega toka: Klimatska naprava, skupna masa: 500 kg, KOMFI AMIGA 52 komercialni laminator za tisk. Proizvodna hitrost: 25 metrov na minuto. Največja velikost pol: B2. Opremljen s priključkom za digitalno kovinsko foliranje. Nsdpfex Ry H Eox Afmocu Globok pladnjasti sesalni podajalnik z Becker črpalko. Avtomatsko ločevanje in dostava pol v sprejemni pladenj. Napajanje: 400V 50Hz, 3-fazno.

Stanje: dober (rabljeno), Vakuumska črpalka, rotacijska lopatična črpalka, rotacijska lopatična vakuumska črpalka, tlačno/vakuumska črpalka, rotacijska lopatična tlačno/vakuumska črpalka -Proizvajalec: Becker, vakuumska črpalka tip U 2.70 SB Ncodpfx Afocilmdemeu -Pogon: 1,5 kW -Volumski pretok: 70 m³/h -Maksimalni tlak: 20 mbar -Hitrost vrtenja: 1420 obr/min -Količina: 2 črpalki na voljo -Cena: na kos -Dimenzije: 640/380/V440 mm / 760/360/V425 mm -Teža: 60 kg/kos.

Stanje: dober (rabljeno), Leto izdelave: 1989, Vakuumska črpalka, rotacijska lopatična črpalka, rotacijska vakuumska črpalka, tlačno/vakuumska črpalka, rotacijska tlačno/vakuumska črpalka -Proizvajalec: Becker, vakuumska črpalka tip VT 3.16 -Pogon: 0,75 kW / 1420 obr/min -Napetost: 380 V -Prostorninski pretok: 16 m³/h -Vakum: -850 mbar -Dimenzije: 430/220/V280 mm Nsdsrgtfrspfx Afmjcu -Teža: 23 kg

Stanje: dober (rabljeno), Leto izdelave: 1987, Vacuum pump, rotary vane pump - Manufacturer: Becker, vacuum pump type VT 3.10 - Drive: 0.37 kW / 1420 rpm - Volume flow: 10 m³/h Nedst E D Dzjpfx Afmjcu - Suction pressure: -850 mbar - Dimensions: 420/190/H285 mm - Weight: 15 kg

Stanje: dober (rabljeno), Leto izdelave: 1987, Vacuum pump, rotary vane pump -Manufacturer: Becker, vacuum pump type VT 3.40 Njdpfx Afot E D Efjmecu -Drive: Dietz 1.25 kW / 1430 rpm -Volume flow: 40 m³/h -Suction pressure: -900 mbar -Dimensions: 420/190/H285 mm -Weight: 38 kg

Stanje: rabljeno, Rotary vane vacuum pump – dry running Manufacturer: Becker Model: KVT 3.140 Motor: 400V/50Hz Suction capacity: 140 m³/h Ultimate pressure: 100 mbar (abs.) Equivalent to 90% vacuum Condition: Fully overhauled Ncodpfx Aob Erpgefmsu Accessories: Vacuum filter installed; operating manual included For further details or technical consultation, feel free to enquire.

Stanje: rabljeno, Rotary vane compressor Manufacturer: Becker Model: VT4.25 Njdpfsb Ii Arex Afmscu Voltage: 400V/50Hz Warranty: 12 months Condition: Fully overhauled and newly painted Free air delivery: 25 m³/h Final pressure: max. +1 bar (rel) Accessories: Operating manual

Stanje: dober (rabljeno), Rotary vane compressor – dry running Manufacturer: Becker Model: KDT 3.140 Motor: 400V 7.5 kW / 50Hz Suction capacity: 140 m³/h Compression pressure: 2500 mbar (abs.) / 1500 mbar (overpressure) Condition: Fully overhauled and newly painted Warranty: 12 months Accessories: – Operating manual Ncsdpfxob Nu D Aj Afmou If you have any questions, please do not hesitate to contact us.

Stanje: kot nova (razstavni stroj), Rotary vane vacuum & compressor - dry-running Manufacturer: Becker Model: DVT 3.140 and DVT 3.100 Nodpfx Aodbb Akjfmecu Motor: 400V three-phase (DS) Suction capacity: 100 - 140 m³/h Compression pressure / Vacuum: selectable ±0.5 bar / ±1 bar / ±1.5 bar Condition: Demonstration unit Warranty: 12 months

Stanje: rabljeno, Rotary vane vacuum pump Oil-lubricated Manufacturer: Becker Model: U5.100 Njdpfxjdnvyps Afmocu Pumping capacity: 100 m³/h Ultimate pressure: 0.1 mbar (abs.) Included: Gas ballast, oil filter Condition: Demonstration unit Warranty: 12 months Delivery time: ex stock

Stanje: rabljeno, Rotary vane vacuum compressor - dry-running Manufacturer: Becker Model: KVT 3.100 Motor: 400V Condition: Fully overhauled and newly painted Nodpfx Asc S D Dqjfmjcu Warranty: 12 months

Stanje: rabljeno, Rotary vane vacuum pump Manufacturer: Becker Model: U4.630 SA/K or F/K Ncodpfxsdnu T Re Afmju Vacuum range: 3 mbar - 0.5 mbar Motor: 15 kW Condition: used, tested! A complete overhaul for the unit is offered separately! Included: Oil filling, vacuum inlet filter Delivery time: ex stock!

Stanje: rabljeno, Rotary vane vacuum pump – dry Njdpfx Ajc S D Drsfmocu Manufacturer: Becker Model: VT 4.40 Condition: Fully overhauled Voltage: 400V three-phase Pumping capacity: 40 m³/h Warranty: 12 months Delivery time: ex stock Further pumps available on request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, trajanje garancije: 6 meseci, vrsta hlajenja: voda, skupna masa: 4.000 kg, delovna širina: 1.000 mm, Schlatter NQD - Cross Seam Welding Machine - Completely Refurbished We are offering a completely refurbished Schlatter NQD Cross Seam Welding Machine. The delivery time for the machine is approximately 4 months. Welding heads: 4 units Traverse path: 950 mm Welding speed: up to 12 meters per minute The machine is only for sale in a refurbished/as-new condition. Best regards, Njdpfx Aeu Tqhhofmscu T. Becker

Stanje: dober (rabljeno), Leto izdelave: 1995, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump Ncodpfx Ajvbyy Usfmou - Manufacturer: Becker, pressure/vacuum pump type DVT 2.140 - Drive: AEG 5.5 kW / 1440 rpm - Volumetric flow rate: 140 m³/h - Suction pressure: -500 mbar - Compression final pressure: 500 mbar - Dimensions: 980/380/H520 mm - Weight: 146 kg

Stanje: rabljeno, prevoženi kilometri: 71.469 km, moč: 100 kW (135,96 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 3.050 kg, lastna masa: 2.065 kg, prva registracija: 08/2018, naslednji pregled (TÜV): 11/2023, emisijski razred: noben, barva: srebrn, voznikova kabina: drugo, vzmetenje: drugo, število sedežev: 9, skupna dolžina: 5.370 mm, gradbena višina: 1.890 mm, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, računalnik na krovu, sistem za imobilizacijo, tempomat, * Appointment for consultation and test drive = shorter waiting times: * Time is valuable and should not be spent waiting. Therefore, we kindly ask you to make an appointment by phone for consultation or test drive. * Service booklet * Non-smoker vehicle * This vehicle has a well-maintained digital service record at Mercedes-Benz. * Last service was carried out at 63,022 km. Nsdpfxjxymzre Afmocu TRANSMISSION / CHASSIS * Comfort suspension * Drive type: Rear-wheel drive * 7G-Tronic Plus EXTERIOR * Factory-tinted windows * Metallic paint * Roof lining in driver's cab * Steering wheel with shift paddles * Steel wheels 6.5 J x 17 LIGHTING & VISIBILITY * Intelligent Light System LED * Daytime running lights * Windscreen wipers with rain sensor * Heated rear window * Automatic headlamp activation * Rear door/tailgate windows with wiper/washer * Aspherical exterior mirrors, both sides * Third brake light * Roof control unit with reading lights for driver/passenger * Ceiling light in load compartment * Electrically adjustable and heated exterior mirrors, both sides * Interior lighting (rear) * Interior rearview mirror ENTERTAINMENT * Becker MAP PILOT * Multifunction steering wheel including trip computer * Instrument cluster with pixel matrix display * Audio 15 * Two-way speakers ASSISTANCE SYSTEMS AND SAFETY * Active Park Assist * Driver assistance system: Attention Assist (drowsiness detection sensor) * Driver assistance system: Hill Start Assist * Driver assistance system: Crosswind Assist * Cruise control * Engine start/stop system * Tire pressure monitoring system * Brake Assist * Adaptive Brake * Child safety locks * Hill start assist * Maintenance interval display (Assyst) * Outside temperature display * Seatbelt system with warning indicator (driver/passenger side) * Central locking with remote control * Power steering * Immobilizer * Anti-lock braking system (ABS) * Brake system with ABS+ASR * Electronic stability program (ESP) * Driver's airbag * Passenger airbag COMFORT * Additional heater (hot water) * Black artificial leather * Steering wheel (mechanically adjustable column) * Rear climate automatic control (Tempmatik) * Climate control (Tempmatik) * Driver's cab seats: comfort driver's seat * Driver's cab seats: passenger seat as twin bench * Load/Passenger area seats: 1st row, 3-seater comfort bench * Load/Passenger area seats: 2nd row, 3-seater comfort bench * Seat system: quick-release for seat rail system * Sliding door load/passenger compartment right side with window * Sliding door load/passenger compartment left side * Lockable glove compartment * Heat-insulating glazing * Warm air duct to load/passenger area * Fleece battery 92 Ah * Grab handles in the rear compartment * Grab handle passenger side * Load/passenger compartment paneling: hardboard * Passenger compartment armrests * Premium interior trim * Roof rack mounting rails * Flooring: passenger compartment TPO * Rear compartment windows: fixed, rear * Electric windows, front (2x) OTHER * Low emissions according to Euro 6 standard * Enlarged fuel tank * GVW upgrade to 3.2 t * Extra long wheelbase * Passenger car registration * and much more * The above information is provided without guarantee. It does not constitute a warranted sp

Stanje: rabljeno, prevoženi kilometri: 79.162 km, moč: 100 kW (135,96 KM), prva registracija: 03/2019, vrsta goriva: dizel, naslednji pregled (TÜV): 07/2027, gorivo: dizel, barva: bela, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: noben, vzmetenje: drugo, število sedežev: 2, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, računalnik na krovu, sistem za imobilizacijo, tempomat, * Scheduling an appointment for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn’t spend it waiting. Therefore, we kindly ask you to schedule a consultation or test drive appointment by phone. * Non-smoker vehicle * This vehicle features a well-maintained digital service record at Mercedes-Benz. * Last service performed at 68,666 km. TRANSMISSION / SUSPENSION * Drive type: Rear-wheel drive * 6-speed manual transmission – TSG (Eco Gear) APPEARANCE * Paint color: Arctic White LIGHT & VISIBILITY * Daytime running lights * Automatic headlight activation * Fog lights * Rear door/tailgate windows with wiper/washer system * Both exterior mirrors: aspherical * Both exterior mirrors: electrically adjustable and heated * Third brake light * Overhead control unit with reading spot (driver/passenger side) * Windscreen with integrated antenna * LED cargo area light * Interior rearview mirror ENTERTAINMENT * Becker MAP PILOT * Multifunction steering wheel incl. trip computer * Instrument cluster with pixel matrix display * Audio 15 * Two-way speakers ASSISTANCE SYSTEMS AND SAFETY * Active Park Assist * Driver assistance system: Attention Assist (drowsiness detection sensor) * Driver assistance system: Crosswind Assist * Cruise control * Tire pressure monitoring system * Brake Assist * Adaptive Brake * Hill start assist * Maintenance interval display: Assyst * Outside temperature display * Seat belt warning system (driver/passenger side) * Seat belt warning system (driver side) * Central locking with remote control * Driver airbag * Passenger airbag * Anti-lock braking system (ABS) * Brake system with ABS + ASR * Electronic Stability Program (ESP) * Immobilizer * Power steering COMFORT * Cabin seats: driver’s comfort seat * Cabin seats: driver’s seat with lumbar support * Sliding door to load/passenger compartment on right * Regulated air conditioning (Tempmatik) Ncsdexv Uldjpfx Afmou * Lockable glove compartment * Heat-insulating glazing * Grab handle passenger side * Cargo anchoring/tie-down points * Window pillar trim * Steering wheel (mechanically adjustable column) * Lashing rails in the load compartment - side wall at roof frame * Interior trim in load/passenger compartment: medium-height hardboard * Fixed window in load/passenger compartment: front right * Fixing rails for roof rack * Anchor points in roof frame * Rear cup holders * Passenger compartment floor: TPO * Interior trim in load/passenger compartment: standard * Full bulkhead with sliding window * Electric window regulators (2) OTHER FEATURES * Low emission according to Euro 6 standard * Enlarged fuel tank * Body/build: standard van * Body/build: compact * Perm. gross vehicle weight: 2.80 t * Truck registration * And much more * The above information is provided without guarantee. It does not constitute agreed specifications. Subject to errors and prior sale. * Our services: * Financing possible even without down payment * Registration service * Trade-in of your old car * Delivery possible * Tire service, winter and summer tires available for an additional charge * We speak multiple languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The nesting machining center is dedicated to companies implementing automation in furniture production. The machine is used for cutting, vertical and horizontal drilling, as well as the production of furniture fronts. The 2030 ATC SEMI AUTO CNC router is equipped with a vacuum raster table with pneumatic sections, which significantly reduces material clamping time. Positioning stops ensure precise placement of the material on the work area. A cleaning beam with a dust extraction module prepares the working table surface for loading material before the next cutting cycle. Ncsdpfeur N A Njx Afmju

Stanje: novo, Leto izdelave: 2026, CNC Milling Plotter 1525 ATC is a precision machine engineered in Poland, designed for the machining of various engineering materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (Dibond, carbon, Alucobond), soft metals, and more. The ATC series machines feature an additionally reinforced frame structure and use AC servo drives on each axis. Combined with an attractive price point, they surpass the competition by a wide margin. CONSTRUCTION: Ncedpfsin Eyvox Afmeu All structural components of the plotter are made entirely from high-quality steel, and during production, they undergo specialized heat treatment processes. WORKING AREA: The usable machining area of our CNC machine is 1500 x 2500 mm. MATERIAL FIXING: The machine is equipped with a vacuum table! Z AXIS TRAVEL & GANTRY CLEARANCE: The standard travel range for the Z axis is 300 mm. DRIVE SYSTEM: Our machines are driven by high-resolution, high-power AC servo motors, ensuring excellent acceleration and speed in all directions. The X and Y axes utilize classical, proven helical racks for durability and accuracy, while the Z axis drive uses a high-quality ball screw. All linear motions run on linear rail guides. SPINDLE: Cutting tools are powered by a robust, liquid-cooled, and durable brushless high-quality spindle. The spindle uses high-grade machine bearings, which ensure very low noise and above-average longevity. Spindle speed ranges from 6,000 to 24,000 rpm. A frequency inverter with a higher power rating than the spindle itself is used for powering, protecting against RPM drops under heavy load. SOFTWARE: The machine is supplied with the latest version of dedicated CAD/CAM software, facilitating quick and easy parts design, which the system then converts to G-code. It is also possible to import ready-made files from other software. CONTROL SYSTEM: Machine operation is managed by a controller equipped with its own CPU and memory, ensuring stable and reliable performance. The controller features active vector analysis for smooth operation and minimal processing deviations. It also offers a resume function after power loss, eliminating the need to restart the program. The controller’s built-in memory allows for standalone operation without the need to reload programs for each job. Optional equipment: * Busch or Becker vacuum pump * Chip extraction system * Oil mist unit * Custom working table size

Stanje: novo, Leto izdelave: 2026, Advantages: * Comprehensive machining capabilities (cutting, drilling, milling, engraving) * Stable construction ensuring maximum precision and reliability * Table with vacuum clamping system * Easy access to the machine enabling single-operator handling * Capability to load an entire pallet of panels onto the feeder CONSTRUCTION: The plotter is made entirely from high-quality steel. During the production process, all components undergo special heat treatment. WORKING AREA: The effective working area of our machine is 2100 x 3100 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum clamping table. Z AXIS RANGE & GANTRY CLEARANCE: The standard Z axis range is 150 [mm]. DRIVES: Nsdpfein Ernjx Afmscu Our machines are driven by high-resolution, high-power AC SERVO motors, providing excellent acceleration and speed across all axes. The X and Y axes are equipped with classic, proven helical racks, ensuring durability and precision, while the Z axis drive uses a high-grade ball screw. All axes run on linear rail guides. TOOL MAGAZINE: The standard configuration includes a revolver-type tool magazine with 6 ISO30 cones. SPINDLE: The machine comes standard with an HSD ES929 spindle - 9kW. SOFTWARE: The machine is supplied with the latest version of comprehensive CAD/CAM software. The software allows for quick and easy design of components, which are then automatically converted to G-code. Import of finished files from other programs is also supported. CONTROL SYSTEM: The machine features the Polish SIMCNC control system, industrial computer with LCD display and a wireless remote controller. Optional extras: * Busch or Becker vacuum pumps * Chip extraction system * Drilling head * Custom working table dimensions RECOMMENDED MATERIALS: - Wood and wood-based materials - Furniture board - Plastics - Composites

Stanje: novo, Leto izdelave: 2026, The CNC 2030 ATC milling plotter is a precision machine manufactured in Poland, designed for machining a wide range of engineering materials such as wood, wood-based panels (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (Dibond, carbon, Alucobond), soft metals, and more. ATC series machines feature a reinforced construction and AC servo drives on every axis. Coupled with an attractive price, they leave the competition far behind. CONSTRUCTION: All plotter components are made entirely from high-quality steel and undergo special thermal treatment during the manufacturing process. WORKING AREA: The effective working area of our machining centre is 2100 x 3100 [mm]. WORKPIECE FIXING: The machine is equipped with a vacuum table! Z AXIS RANGE AND GANTRY CLEARANCE: The standard Z axis travel is 300 mm. DRIVES: Our machine tools utilise high-resolution, high-power AC servo drives, ensuring rapid acceleration and travel speeds in all directions. The X and Y axes feature classic, proven helical rack and pinion systems for high durability and precision, while the Z axis is driven by a high-grade ball screw. All axes operate on linear guide rails. SPINDLE: The cutting tool is powered by a high-quality, powerful, liquid-cooled and durable brushless spindle. The spindle is fitted with high-quality machine bearings, guaranteeing very quiet operation and above-average durability. Spindle speeds range from 6,000 to 24,000 rpm. SOFTWARE: The machine comes equipped with the latest version of suitable CAD/CAM software. CONTROL SYSTEM: The machine is operated via a controller featuring its own processor and memory, providing stable and reliable performance. The controller offers active vector analysis for smooth operation and minimal processing error. It also features a work resume function after power failure, so there is no need to restart the program. The built-in memory allows the machine to operate without needing to reload the program each time. Optional equipment: * Busch or Becker vacuum pump Ncodpfx Aein Ek Defmsu * Chip extraction system * Oil mist system * Custom table size

Stanje: dober (rabljeno), Leto izdelave: 1997, Vakuumska črpalka, lopatična črpalka, lopatična vakuumska črpalka, tlačno/vakuumska črpalka, lopatična tlačno/vakuumska črpalka - Proizvajalec: Becker, vakuumska črpalka tip VT 4.25 - Pogon: AEG 0,75 kW / 1420 obr./min - Volumski pretok: 25 m³/h - Sesalni tlak: -850 mbar Ncodpfx Afjrgtd Rsmou - Količina: 1x črpalka na voljo - Dimenzije: 490/250/V300 mm - Teža: 31 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1999, skupna masa: 6.000 kg, volumenski pretok: 300 m³/h, vhodna frekvenca: 50 Hz, največja hitrost vrtenja: 2.950 obr/min, Industrial pumps by KSB – 1 unused, 3 used KSB Centrifugal Pump + Motor Unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Frankenthal (Pfalz), Germany plant Condition: Used, but in good condition Ncsdpfxjwq Shbe Afmju ⚙️ Technical Specifications – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical Specifications – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: This industrial high-performance pump by KSB is ideally suited for the transfer of large liquid volumes. The pump is sold together with the matching motor unit. Manufactured to the robust German engineering standards of its time, renowned for durability and high performance. 2. Pump Information: KSB Centrifugal Pump + Motor Unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Pump year of manufacture: 1968 Origin: Frankenthal (Pfalz), Germany plant 🔧 Technical Specifications – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical Specifications – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after removal from an industrial plant. Technical data was verified using the nameplate.

Stanje: rabljeno, Leto izdelave: 1977, Side channel blower, side channel compressor, ring blower, vacuum pump, blower - Manufacturer: Becker, side channel vacuum pump, side channel blower - Model: SKG 340-2V.02 - Drive: Dietz 3.0 kW, 2870 rpm - Speed: 2850 rpm - Flow rate: 250 m³/h - Compression pressure: 240 mbar - Dimensions: Ø 480 x 560 mm - Weight: 67 kg/unit Nedpfsun Dwmjx Afmjcu

Leto izdelave: 2009, stanje: dober (rabljeno), Vacuum lifter, vacuum lifting device, vacuum suction lifter, panel lifter - Manufacturer: Reis - Description: Vacuum lifting device without control unit - Previous application: Handling of solar panels Ncjdotpyquspfx Afmou - Condition: Very good, only in use for a few months - Vacuum pump: Becker Vt 4.16, 0.55 kW - Suction cups: Ø 25 mm - Lifting mechanism: Travel path Z = 1,780 mm - Individual components: see photos - Dimensions: 3,000 / 850 / H 2,480 mm - Total weight: 580 kg