Beckers nakup rabljenega (182)

Stanje: rabljeno, prevoženi kilometri: 393.720 km, moč: 105 kW (142,76 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 3.500 kg, prva registracija: 02/2017, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 10 m³, emisijski razred: Euro 6, barva: bela, število sedežev: 2, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Vehicle no. for customer inquiries: 119 ----Special equipment: * EURO 6 * 4x4 * High roof * Regulated air conditioning (Tempmatik) * Becker MAP Pilot navigation system * Sliding door on both sides! * Rear-view camera * Parktronic system (PTS) * Hill start assist * Audio system Audio 15 (radio with color display) * Exterior mirrors without integrated turn signal indicator * Outside temperature display * Side front turn signal indicators * Roof control unit with reading lights, driver/passenger side * Cargo area ceiling light with door contact * Anti-theft alarm system + interior monitoring / tow-away protection * Rear door (opening angle 270 degrees) * Wooden floor in cargo area * Fuel tank: main tank 100 ltr. * Cargo partition with window * Steering wheel (column mechanically adjustable) * Sliding door, load/passenger compartment left * Rear mud flaps * Front mud flaps * Driver's cab seats: comfort driver's seat * Rear stabilizer * Reinforced front stabilizer * Rear step * Load/passenger compartment lining: plywood * Fleece battery 95 Ah * Thermal insulation glazing (windscreen with top band filter) * Additional heater (air) electric ----Standard equipment: * 3rd brake light * Adaptive brake light * Driver airbag * Anti-lock braking system (ABS) * Drivetrain: selectable all-wheel drive * Washer fluid level indicator * Exterior mirrors electrically adjustable and heated, both sides * Exterior mirrors with integrated turn signal indicator * Brake assist * Brake system with ABS + ASR * Roof lining in cab * Electronic Stability Program (ESP) Iiedpfjtrp I Sjx Ah Djh * Electric windows, front * 6-speed gearbox - TSG (Eco Gear) * Lockable glove compartment * Body/build: high roof van * Child safety lock * Load securing/tie-down lashing rings * Headlight range adjustment * Model update * Engine 2.1 ltr. - 105 kW CDI CAT * Particle filter * Sliding door, load/passenger compartment right * Power steering * Seat belt system with warning (driver's side) * Seat covers/upholstery: Lima fabric * Cab seats: passenger seat with armrest * Cab seats: adjustable passenger seat * Cab seats: driver's seat with armrest * Maintenance interval display Assyst * Immobilizer * Central locking with remote control * Permissible total weight: 3.50 t ----Technical data: * Wheelbase: 3,665 mm * Cargo area dimensions: L: 3,300 mm W: 1,750 mm H: 1,900 mm * Payload: 910 kg * Tire size: 225/75 R16C * Tire tread: 60%-30% ----EUR 16,800 net plus VAT * For export to non-EU countries or EU member states, a deposit is retained. This will be refunded to the buyer upon proof of customs clearance or delivery. * Worldwide delivery possible - please contact us for your individual offer! * We are happy to take your used vehicle in part exchange! * This description serves only for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. * The information provided does not claim to be complete. The specifications, descriptions, and images are non-binding and do not constitute guaranteed characteristics. * We accept no liability for mistakes or obvious errors. * The buyer is obliged to independently check the condition and equipment of the vehicles prior to purchase. * Subject to price changes, typographical errors, mistakes and prior sale. * Dear customer, please understand that due to ... (text cutoff)

Stanje: dober (rabljeno), Foliant Mercury 760 NG Laminirni stroj Najbolj opremljen laminirni stroj v ponudbi Foliant. Popolnoma avtomatski stroj, idealen za digitalne tiskarne. V zelo dobrem stanju, pripravljen za delo. Letnik izdelave: 2019. Opis: – podajanje iz visokega kupa, glava na servo motor (dvižna ploščad) – avtomatski separator – pnevmatski pritisk valjev – modul za ravnanje pol – vgrajen Becker kompresor – jogger za zbiranje pol – modul za zlatotisk, navijalnik Sistem podajanja: glava na servo motor Maksimalna velikost pole: 76×110 cm Minimalna velikost pole: 25×32 cm Maks. kapaciteta: 1300 pol B1/uro Maks. hitrost laminacije: 20 m/min Temperatura: 80–140 °C Ijdpfx Aexcn Ixsh Djih Čas segrevanja: 8 min Vgrajena moč: 6000 W Električni priključek: 380 V Teža: 810 kg

Stanje: rabljeno, Leto izdelave: 2003, Offset à 6 couleurs avec groupe de vernissage Roland 706/3B+LTTLV (UV) Année de fabrication : 2003 Compteur d'impressions (millions) : 500 Commande de la machine - RCI - Contrôle de densité IntelliTrax II Alimenteur - Alimenteur non-stop - Système logistique dans l'alimenteur Groupes d'impression - Nombre de groupes d'impression : 6 - Machine sans retiration - Changement automatique des plaques APL - Dispositif automatique de lavage des blanchets - Système de refroidissement : Technotrans - Thermorégulation de l’encrier Vernissage - Nombre de groupes de vernissage : 2 Iodpfx Aheuhtg As Doih - Nombre de groupes de transfert : 2 - Système de racleur à chambre Tresu - Nombre de rouleaux tramés (anilox) : 2 Séchage - Sécheur IR entre le 1er et le 2ème groupe vernis - Sécheur IR + air chaud en sortie - Sécheur UV en sortie : Eltosch Sortie - Sortie non-stop - Poudreuse : Grafix Cantronic 3000 - Système logistique en sortie Rehaussement - Machine rehaussée de (cm) : 50 Accessoires - Armoire d’alimentation d’air : Becker - Armoires refroidies par air - Compresseur d'air comprimé, exclusif

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 40 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, CNC obdelovalni center Delovno polje X-os: 3.200 mm Delovno polje Y-os: 1.550 mm Delovno polje Z-os: 140 mm Leto izdelave: 2024 Freza motor 9Kw ER32/ER40 Hitrost 1.000 / 24.000 obratov Iisdpjvmztmjfx Ah Djh Priklop ISO-BIESSE Revija za avtomatsko menjavo orodij Večvretenska vrtalka + 2 utorne žage 7x vertikalnih svedrov 8x horizontalnih svedrov Programska oprema PWood Pegasus uvoz: DXF, jpg, png, eps, plt, ... CAD rezkanje 3D simulacija Program za optimizacijo gnezdenja Vakuumska črpalka Becker VTLF2.250 5,5Kw Omron varnostna svetlobna zavesa Centralno avtomatsko mazanje Priključni premer za odsesavanje Ø150 Potrebna kapaciteta odsesavanja 28m/m | 2900m3/h Teža Skupna moč

Stanje: rabljeno, prevoženi kilometri: 71.275 km, moč: 120 kW (163,15 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 3.500 kg, prva registracija: 11/2015, naslednji pregled (TÜV): 09/2026, emisijski razred: Euro 5, barva: bela, število sedežev: 3, Leto izdelave: 2015, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Special equipment: Storage compartment in roof lining of driver's cab, 13-pin trailer socket, Audio 15 audio system (radio with color display), outside temperature display, roof control unit with reading spot light on driver/passenger side, interior light in the cargo area, 180 A alternator, rear door (opening angle 270 degrees), wooden floor in cargo area, folding lid for storage compartment, Becker MAP Pilot navigation system, cross member with integrated step, spare wheel with regular tires, spare wheel holder at end of frame incl. jack, reversing camera, rear mud flaps, front mud flaps, driver cab seats: double passenger seat, driver cab seats: comfort suspension seat, driver's side, plastic lining in cargo/load area, fleece battery 95 Ah, tachograph pre-installation Isdpfx Aoxbm Steh Djih Additional features: 3rd brake light, adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors, both sides, exterior mirrors with integrated turn indicator, brake assist, braking system with ABS+ASR, roof lining in driver's cab, lockable glove compartment, body/structure: standard high-roof van, child safety lock, fuel tank: main tank 75 liters, continuous cargo partition, load anchoring / lashing eyes, headlight range adjustment, model refinement, engine 2.1 l - 120 kW CDI CAT, wheelbase 3665 mm, smoker package, low emissions according to Euro 5 emissions standard, right-side sliding door in cargo/passenger compartment, seatbelt system with warning device (driver's side), seat cover/upholstery: Lima fabric, front stabilizer, steel rims 6.5x16, service interval display Assyst, heat-insulating glazing, permissible total weight 3.50 t Errors and prior sale excepted Viewing by appointment only WhatsApp inquiries will not be answered

Stanje: rabljeno, prevoženi kilometri: 111.742 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 2.800 kg, prva registracija: 03/2017, naslednji pregled (TÜV): 07/2025, emisijski razred: Euro 6, barva: modra, število sedežev: 3, Leto izdelave: 2017, Oprema: centralno zaklepanje, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Vehicle number (for inquiries): 97 Mercedes-Benz VITO 119 CDI BLUETEC LONG Single owner. Full service history. Last service at 85,395 km. Paint code: * 5610 paint color navy blue Interior: * VY2 fabric Tunja black Equipment: * CF0 Basic chassis * CL1 Steering wheel adjustable in tilt and height * CL3 Leather steering wheel * CL4 Multifunction steering wheel with trip computer * D51 Full partition with window * E07 Hill start assist * E1N Becker® MAP PILOT * E28 Additional battery for retrofit consumers * E34 Buffer battery for starting process * E36 Isolating relay for additional battery * ED4 AGM battery 12 V 92 Ah * EK1 Terminal strip for electrical connection * EL8 Two-way front speakers * EN7 Audio 15 * EZ5 Park package * EZ7 Active Parking Assist * F64 Electrically folding exterior mirrors * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FKA Panel van * FP4 Chrome package interior * FR8 Reversing camera * FY1 Anti-theft package * FY7 Multi-button remote control * FZ8 Comfort opening and closing with IR remote control * G42 7G-Tronic Plus * H12 Warm water auxiliary heater * H16 Driver’s seat heating * H20 All-round heat-insulating glass * HH4 THERMOTRONIC automatic climate control * HI1 Climate zone 1 (cold/comfort) * HY1 Remote control for auxiliary heater * HZ0 Electric supplementary heater * IG4 Standard * IG5 Basic * IL1 Domestic (Germany) * IN2 Wheelbase 3200 mm, long overhang * JA1 Warning light for windshield washer fluid level * JA6 Collision Prevention Assist * JA7 Blind spot assist * JF1 Rain sensor * JK3 Instrument cluster with pixel matrix display * JP2 Assistance package * JW5 Lane keeping assist * JW8 Attention Assist * JX2 Maintenance interval 40,000 km * KB5 Main tank 70 liters Iiedpfsubg Ruex Ah Doh * KD2 Exhaust system N1 registration * LA2 Light assistant * LB9 Exit lights * LC2 LED light strip in load compartment * LC4 Comfort roof control unit * LC7 Front footwell lighting * LC8 Surround lighting tailgate * LE1 Adaptive brake light * LG2 LED Intelligent Light System * LG4 Tail, brake, and indicator lamps in LED technology * LP1 Interior and environment lighting panel van * LX5 Europe * M3C Electric suction fan, power level 3 * M40 Alternator 14V/200A * MA6 Emission standard Euro 6b N1 * MG4 Engine OM651 DE 22 LA 140 kW (190 hp) * MG9 Generator management * MJ8 ECO start/stop function * MS1 Cruise control * MX0 BlueEFFICIENCY package * OD4 Service campaign diesel control code 4 * Q50 Trailer coupling with removable ball head * RD8 Full wheel covers * All-season tires * RG7 Tires 225/55 R17 * Alloy wheels 7J x 17 * S23 Dual passenger seat * SA6 Passenger airbag * SB1 Comfort driver’s seat * SE5 Lumbar support for driver’s seat * V20 Load compartment trim upper sections * V30 Side wall interior trim in load/passenger compartment * V43 Wooden floor * VV0 Welded nuts in sidewall for upfits * W65 Tailgate * XC9 COC papers * XG6 Weight variant 2,800 kg * XN6 Modification year U6-II * Z41 Registered as a truck * Z9A Cabin Comfort Package * Z9B Driver Comfort Package WARRANTY UP TO 36 MONTHS POSSIBLE. TRADE-IN POSSIBLE. More vehicles can also be found on our homepage:

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Slotter, Gandoss&fossatti, leto 1979. Format 2650x1350. Skipfeed 1750. Vakuumski zlagalnik (Becker črpalka). Dve flekso barvi. Avtomatsko podajanje z dodatnimi orodji za ročaje in luknje. Zlagalnik. Iiedpjw N Nhujfx Ah Deh

Stanje: rabljeno, Leto izdelave: 1998, Moč: 1 kW (1 KM) Hitrost vrtenja: 1500 o/min Proizvajalec: Zanchetta (Romaco Group) Model: Rotolab Leto: 1998 Tip: Visoko strižni granulator-mešalnik Prostornina: 2 litra Iiodpfx Asvlzwvjh Deh Odprtina: pokrov Rezalnik = 1500 o/min Spremenljiva hitrost mešanja: 20 – 955 o/min Maks. temperatura posode: 85°C Ogrevalni plašč Senzor temperature Priključek za vakuum in dušik (.) Materiali: nerjaveče jeklo Obratovalni tlak: 0,6 MPa Becker vakuumska črpalka: 1,25 kW

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 10.050 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 7.000 mm, pomik po osi Z: 1.700 mm, proizvajalec krmilnikov: KIMLA, dolžina obdelovanca (maks.): 7.000 mm, širina obdelovanca (maks.): 2.000 mm, število mest v zalogovniku orodij: 10, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Naprava kupljena po individualnih zunanjih naročilih, malo uporabljena, v zelo dobrem tehničnem stanju. Vreteno 5D HSD 12 kW 24000 obr/min, vakuumska miza, 3D modul za upravljanje, servo pogoni AC z digitalno tehnologijo HIGH Speed Machining, senzor za korekcijo orodja, krmilna omara, računalnik za nadzor, vakuumska črpalka Becker, samodejna oljna megla, samodejna menjava orodij, samodejni magazin za 10 HSK63 stožcev, redno servisirano v Sloveniji. Iodexc Ey Sjpfx Ah Djih

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 200 mm, dolžina podajanja os X: 3.200 mm, dolžina pomika po osi Y: 1.600 mm, hitrost pomika os X: 70 m/min, hitrost podajanja osi Y: 70 m/min, hitrost podajanja os Z: 25 m/min, proizvajalec krmilnikov: Syntec, model krmilnika: SYNTEC, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Cena: Po dogovoru CNC NESTING REZKALNI STROJ Z ŽAGO 0-360º CNC obdelovalni center Letnik 2025 Hiteco CNC rezkalni motor 12 kW kontakt HSK63F menjalni magazin za orodje, 10 pozicij multi-vrtalnik 7x vertikalnih vrtal 8x horizontalnih vrtal 1 utorna žaga X-os 1 utorna žaga Y-os Iedpfx Ahotty Ahe Doih programska oprema PWood Pegasus Delovno področje X-os: 3.200 mm Delovno področje Y-os: 1.600 mm Delovno področje Z-os: 200 mm Vakuumska črpalka Becker VTLF2.250 5,5 kW Omron varnostna svetlobna pregrada centralno avtomatsko podmazovanje z mastjo priključni premer za odsesavanje Ø200 Potrebna zmogljivost 28 m/min | 2.900 m3/h Teža 3.200 kg 1 leto brezplačne spletne podpore (help desk). Teamviewer v angleščini. Ta storitev preprečuje nepotrebne izpade. Dostava in montaža po Evropi.

Leto izdelave: 1966, obratovalne ure: 10.000 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, zunanji premer: 420 mm, številka stroja/vozila: 58256, Nebiolo Saturnia in zeer goede staat. Afkomstig van eerste eigenaar, aanvankelijk in gebruik als boekdrukpers in de opkomende offsetmarkt in de jaren 70. Het bedrijf produceerde altijd in offset tot maximaal formaat 50/70. Gevestigd als lokale drukkerij in een dorp werd de Nebiolo soms ook gebruikt voor het rillen, snijden en pregen van enkele offsetopdrachten. Zeer goede machine, laag geluidsniveau, uitstekende staat van alle mechanische onderdelen. De luchtpomp voor aanleg en afvoer is van latere makelij: Becker droogpomp 100m³ met laag geluidsniveau. Alle noodzakelijke onderdelen worden meegeleverd, inclusief het originele gebruikers- en onderdelenboek. De cilinder heeft een 6 cm grotere diameter dan een KBA Condor en weegt 800 kg, slechts 200 kg lichter dan een Heidelberg SBB/SBD. De aflegging is onderscheidend en voor karton beter dan die van zijn concurrenten: een drievoudige trommelaflegging, waarbij de voorzijde weer wordt omgedraaid op de transportbanden naar de stapel. Het beste resultaat wordt bereikt door de individuele bandjes te vervangen door één brede band en extra aandacht te besteden aan het netjes leggen van de vellen vanaf de band met verbeterde luchtaanvoer. Uiteraard kunnen wij deze aanpassingen voor u verzorgen. Hierdoor beschikt u over een snellere, zeer eenvoudig te bedienen en onderhouden machine met een hogere productiviteit en minstens dezelfde duurzaamheid (met minder geluid door minder bewegende delen) als een Heidelberg SBD van vergelijkbaar formaat, maar voor meer dan de helft van de prijs. Echt een mooi product van Nebiolo, net als zijn grote broer Urania. De machine beschikt over pull-lays, maar kan eenvoudig worden omgebouwd naar push side lays. Enkele specificaties: Maximale papiermaat: 650 x 950 mm Minimale papiermaat: 300 x 420 mm Snelheid: 1500 – 4000 vel/uur Aanvoerstapelhoogte: 550 mm Aflegstapelhoogte: 650 mm Drukkracht: ca. 35.000 N (niet verstelbaar, slechts één waarde) Bearershoogte: 24,85 mm; machine vereist "normale - Bobst standaard" 23,80 stansvormen/-lijnen met een geharde stalen plaat onder de vorm voor fijne compensaties met dun karton of papier eronder. Dit is de enige en beste methode. Een 45 tot 47 HRC plaat wordt meegeleverd, evenals een nieuwe cilinderjas. Aanvoer en afligging werken met een extra externe pomp, Becker, 100m³, 2kW. Isdpstyyvwjfx Ah Doih Afmetingen machine (ca., met trede): L x B x H = 330 x 220 x 190 cm Netto gewicht: 4.800 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PRATIX Z2-27, potovalna razdalja osi X: 2.700 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 180 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, skupna masa: 2.000 kg, hitrost vretena (min.): 24.000 obr/min, število mest v zalogovniku orodij: 10, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Opis TEHNIČNI PODATKI PRATIX Z2-27 OS Uporabno obdelovalno območje X-Y-Z * 2.700-1.300-180 mm Hod osi X-Y-Z 3.060-1.735-250 mm Vektorska hitrost X-Y 60 m/min DELOVNA MIZA Tip MF aluminijasta raster miza 1.225 - 2.750 Vakuumska črpalka Becker 250m3 BURILNA SKUPINA F12 Vertikalni svedri Št.-obr/min 12 (7X-5Y) – 4.000 FREZALNI MOTOR Moč kW (KM) 7,5(10) Min - max hitrost vrtenja Iijdpfexgdc Hsx Ah Dsh obr/min 1.500 – 24.000 Magazin orodij v mizi Št. pozicij 10 pozicij Nameščena moč KVA 23÷28,5 Skupna teža stroja 2.800Kg Cena brez DDV in orodja

Stanje: rabljeno, Vozidlo na renovaci potrubí s UV zařízením – systém Streicher, použitý nákladní vůz MAN TGM 15.250 🧰 Technická data vozidla: • TYP: MAN - TGM 15.250 • Barva: bílá • Palivo: nafta • Kompresor: jednotka Atlas Copco • Dmychadlo: Becker DTLF 250 • Světelné zdroje:  8 x 400 / 650 W, s pojezdovými sadami  8 x 1000 W, s pojezdovými sadami  2 x 4 1000 W dvojité jádro • Délka kabelu: cca 200 m • Kompletní vestavba vozidla • Řídicí jednotka plně funkční - Streicher • Dotykový ovládací panel • Kompletní instalace • Navijáky hadic Iodpfxow Inizj Ah Djih 💰 Cena 149 900 € bez DPH / cena k jednání • Náklady na dopravu: v celé Evropě na vyžádání • Dodání: Ihned k dispozici • Prohlídka a odběr: kdykoliv po dohodě Trvale skladem více než 5 000 bm paletových regálů od různých výrobců (Změny a omyly v technických údajích, informacích a cenách a mezitímní prodej vyhrazeny! Viz naše VOP, všechny ceny bez DPH, ze skladu.)

Stanje: rabljeno, prevoženi kilometri: 199.999 km, moč: 120 kW (163,15 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 11/2015, emisijski razred: Euro 5, barva: bela, število sedežev: 3, skupna dolžina: 5.998 mm, Oprema: ABS, centralno zaklepanje, filter saj, parkirni grelec, Chat now via WhatsApp: Quick & easy contact with our sales consultant Internal ID Number: [2829] ----Optional extras available: * 12–64 months warranty (valid across the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing possible, even without down payment ----Vehicle Highlights: * 19% VAT deductible * German vehicle * Accident-free * Regularly serviced * Euro 5 standard * Special equipment: 13-pin trailer socket, Audio System Audio 15 (radio with color display), exterior temperature display, BlueEfficiency package, roof control unit with reading light driver/passenger side, ceiling light in cargo area with door contact, driver assistance package, tachograph digital, downloadable, remote control for auxiliary heating, rear door (opening angle 270 degrees), wooden floor in cargo area, steering wheel (mech. adjustable column), Becker MAP Pilot navigation system, spare wheel in running gear, spare wheel holder under rear frame incl. jack, reversing camera, interior rear-view mirror, seat cover/upholstery: synthetic leather (driver's cab), front stabilizer, fuel sender for auxiliary heating, rear door step, fleece battery 95 Ah, heat-insulating glazing (windscreen with top band filter), auxiliary heater (hot water) * Further equipment: 3rd brake light, adaptive brake light, driver's airbag, washer fluid level indicator, exterior mirrors electrically adjustable & heated (both), exterior mirrors with integrated indicators, brake assist, brake system with ABS+ASR, roof lining in driver's cab, lockable glovebox, body/superstructure: high-roof van standard, child safety lock, fuel tank: main tank 75 ltr., full bulkhead partition, load securing/tying rings, headlight range adjustment, model update, engine 2.1 ltr. – 120 kW CDI CAT, wheelbase 3,665 mm, smoker's package, low emissions to Euro 5 standard, sliding door right side cargo/passenger area, seatbelt system with warning device (driver's side), seats in driver's cab: adjustable passenger seat, maintenance interval indicator Assyst, permitted gross weight 3.00 t ----Interested in leasing or financing? We offer attractive conditions – also possible without a down payment! Contact us for more information. Contact: Telephone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm Iijdoxdg Sljpfx Ah Djh ----Note: All information provided online is non-binding and solely serves as a general vehicle description. Errors, mistakes, and prior sale excepted. The binding condition of the vehicle is defined exclusively by the purchase contract on site or through written agreements. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our business customers.

Leto izdelave: 2004, Stanje: nepreverjeno (rabljeno), Working area and axis travel No.2 worktables of 1,600 x 1,800 mm each Total working area with joined tables: 3,220 x 1,800 mm Axis travel: X = 4,300 mm ; Y/W = 3,200 mm ; Z = 300 mm Workpiece clearance Z = 300 mm Vacuum pumps: Becker rotary type, 2 units x 250 m³/h Mechanical Structure: Monolithic, fixed-gantry steel frame with base, side beams, and upper beam, all thermally welded in a single piece and then thermally stabilized. The upper beam, with a large cross section of 400 x 400 mm, is designed with combined sections for ultra-high rigidity. Numerical Control: Osai CNC with DUAL TFT MONITOR OSAI 10/510 INDUSTRIAL DIGITAL CNC Series with integrated second computer: WINLINK with TeleService Integrated Industrial PC within OSAI controller. Interactive operating panel TFT color monitor dedicated to OSAI CNC section TFT color monitor dedicated to Windows PC section No. 02 Electrospindles: HSD Routing Electrospindles, with both CW and CCW rotation Maximum speed: 32,000 rpm Special high-speed ISO 30 tool holder Power output: P = 10.5 kW = 14.5 HP at 18,000 rpm P = 10.5 kW = 14.5 HP at 24,000 rpm P = 7.0 kW = 9.5 HP at 32,000 rpm Iiodpfxohvmwkj Ah Doh Front ceramic bearings Rear ceramic bearings Liquid coolant cooling system Multi-position, CNC-controlled step suction hood Electrospindle floating device Digital electronic inverter No. 01 Setting Axis (patented system) Consists of an additional independent Z-axis for operator head no. 2 (left side). Allows CNC correction of the Z-axis difference between tool lengths working on the same part. Enables machining operations where floating mechanical copying of the part is required. No. 02 Tool magazines, 10-position each, rotary turret type, for fast and efficient tool changes No. 02 HSD Drilling heads Model BH 19 equipped with 19 spindle drilling units: 13 independent vertical spindles in T formation: 5 on the X-axis at 32 mm center distance, and 8 on the Y-axis at 32 mm center distance 4 horizontal spindles along Y direction (2+2 opposed) 2 horizontal spindles along X direction (1+1 opposed) Installation data: Overall dimensions approx. 6,950 x 6,700 mm (width x depth) Electrical supply: 380 V, 3-phase, 50 Hz; I = 100 A; P = 59 kW Pneumatic supply: 7.00 - 7.50 Bar Extraction system: 2 x 200 mm diameter; 30 m/sec; at approx. H = 3,200 mm

Stanje: rabljeno, prevoženi kilometri: 142.876 km, moč: 120 kW (163,15 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 3.500 kg, prva registracija: 08/2018, naslednji pregled (TÜV): 10/2026, emisijski razred: Euro 6, barva: bela, število sedežev: 3, Leto izdelave: 2018, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Equipment: * Body/Superstructure: High-roof panel van * 'Success Package' equipment package * Air conditioning * Automatic transmission * Comfort suspension driver's seat, heated * Double passenger bench seat * Towbar, towing capacity – 3.5 t * Rear doors (opening angle 270 degrees) * Wooden floor in cargo area Iiedpfx Ajw H Ux Hjh Djh * Cargo area lining: plywood * 1 row of lashing rails * Additional (electric) air heater Technical Features: * Becker MAP Pilot navigation system * Bluetooth hands-free system * Reversing camera * Outside temperature display * Exterior mirrors electrically adjustable and heated Safety/Environment: * Driver and passenger airbags * Braking system with ABS & ASR * Hill start assist * Driver assistance system: Collision Prevention Assist with emergency braking function * Low emissions according to Euro 6 emissions standard Miscellaneous: * German first delivery * 1 previous owner * Engine: 2.1 l – 120 kW CDI CAT * Wheelbase: 3,665 mm * Permissible gross weight: 3.5 t * Permissible total tow weight: 7.0 t Since 1971, your reliable partner for automobiles/commercial vehicles at 28832 Achim, Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps approx. 200 vehicles in stock including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we will gladly prepare an individual offer for you! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is desired, we will gladly provide an offer from our partner workshops. Our offer generally EXCLUDES a new TÜV inspection. Delivery of your 'new' commercial vehicle is possible through our external partners for an additional fee. The information contained in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical and data transmission errors. Listed equipment details may need to be checked separately. Subject to prior sale and errors.

Stanje: novo, Leto izdelave: 2025, potovalna razdalja osi X: 2.600 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 200 mm, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, CNC portalni rezkalni stroj tip Nesting Iisdoxdh T Dspfx Ah Doh delovno območje X-os 2.600 mm delovno območje Y-os 1.300 mm delovno območje Z-os 200 mm 9 kW ATC vreteno menjalnik orodij linearni, opcijsko karuselni pogoni servo vakuumska miza vakuumska črpalka Becker VTLF/2.250 m3/h CNC upravljanje Syntec Pegasus CadCam Neskončne možnosti: rezkanje, reliefi, fotografije, Fusion, konture, poravnava hrastovih plošč, rezkanje DXF-DWG logotipov, ... in še mnogo več za materiale: MDF, melamin, karbon, Trespa, dibond, Alucarbon, PP, PPE, les Za več informacij o ceni in dobavi nas kontaktirajte brez obveznosti. Prevoz, montaža in strokovna razlaga strojev je možna na lokaciji.

Stanje: rabljeno, Leto izdelave: 2003, Perfect binding line Consisting of: Collating machine Kolbus ZU 841.B Year of manufacture: 2003 Description: - Manual feed station: 1 - Number of collating stations: 21 - Optical sheet type detection Feeder for inserts Card gluer - Hotmelt gluing: Nordson Problue 4 - Air Center: Becker VariAir, 2005 Ijdpfx Aov N U U Nsh Deih - Positioning element - Reject delivery for incomplete products: AS 841 - Transfer to binder Perfect binder Kolbus KM 410.B Year of manufacture: 2003 Description: - Semi-automatic setup - Co-Pilot with touchscreen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Dedicated dust extraction (machine was connected to a central dust extraction system) - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: Robatech ICS C 160 - 1st PUR spine gluing unit, interchangeable (nozzles): EP 48V, 2008 - Premelter for PUR spine gluing unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side gluing unit, interchangeable: 3 mm - Premelter for side gluing unit: Robatech ICS C 30 - Gathering cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st pressing station - 2nd pressing station - Laydown unit Description updated on 04.09.2023

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Andi Stratos CNC stroj Delovno območje 2520 x 1285 ISO30 vreteno Izmenjevalec orodij Becker vakuumska črpalka 250m3 Iodpfx Ahsxc T Ahs Doih Ograja levo in desno Laserska varnost spredaj Fanuc krmiljenje Stroj popolnoma delujoč Na voljo november 2025

Leto izdelave: 2024, Stanje: rabljeno, številka stroja/vozila: 0242024, New demonstration machine! List price: €52,742 net Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact panel, and subframe with adjustable machine feet. Milling bed configured as a 19mm MDF sacrifice board. Table openings preconfigured lengthwise and crosswise. Mechanical set includes profile rails, profile rail carriages, ball screw drive, and precision rack and pinion. All components are assembled, pre-lubricated and tested, and ready for immediate operation. Control system set includes control cables, energy chains, planetary gears, stepper motors, high-performance amplifiers, power supply, and toroidal transformer, all pre-installed in a control cabinet, as well as sensors for each axis. Switching relay for automatic control of existing extraction system. Brush seals for dust protection, and CE-compliant safety equipment through a moving extraction unit and a one-sided mounted laser scanner for work area monitoring, with 275° coverage and a 5.5m field range (enabling machine installation in a corner). Handheld control unit equipped with all necessary functions for machine operation, including emergency stop and dead-man's switch. Tool length sensor for determining tool length and for setting active zero offset. High-frequency spindle with 2.2 kW, including locknut, frequency inverter power filter, brake resistor, and collet set. Monitor as built-in display, including mini PC with Windows 10, featuring Beamicon2 control software, plus mouse and keyboard, all pre-installed in an ergonomic console. CAD license Rhino 7.0 and CAM license Estlcam V11, along with all required documentation, will be sent via email prior to delivery. Vacuum Axolox 2513: Milling bed constructed as a vacuum table, consisting of four individually controllable segments. Cross-table made from PE with an MDF top sheet. Vacuum pump from Becker with a capacity of 100m³/hour, oil-lubricated. Power connection for the vacuum pump requires a plug for 3-phase, 16 amps, 400 V. Customer must provide 3mm HDF plain on both sides for the entire vacuum table (2,500 x 1,300 mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Tool kit in Systainer Maintenance kit in Systainer: 150 ml grease gun, one cartridge of high-performance grease (400 g), 500 ml can of silicone spray grease, a grease nipple with hose section, and a 30mm face mill with reversible inserts. Pneumatic unit: consists of four cylinders, throttle check valve, push-in fitting, angle push-in fitting, silencer connectors, filter regulator, L-distributor, PE tubing and holders, designed for use in a preconfigured table opening (for end-face machining). If pneumatics are required for both table openings, two positions must be calculated. (NOTE: Compressor must be provided by the customer) Technical Data: Travel distance: (X / Y) 2,500 x 1,300 mm, Z = 200 mm Dimensions: (L / W) 3,800 x 2,300 mm, H = 1,900 mm Footprint: approx. 20 m² (minimum installation space) Weight: 1,500 kg Rated voltage: 400 V Repeatability: +/- 0.1 mm Power requirements: 4.3 kW Iijdpfxew Tfy Uj Ah Djh HF spindle: 2.2 kW Traverse speed: 25 m/min

Stanje: dober (rabljeno), Leto izdelave: 2004, I am selling a 3-axis CNC machining center Biesse Rover 24L with traverse table, year of manufacture 2004. Configuration: 3-axis main spindle HSD, fully overhauled and water-cooled (RS1600) Tool magazine with 7 positions, ISO30 at the head 1x grooving saw, X-direction Drilling head with 14+4+2 drilling spindles Usable working area: 4500x1330mm 2 working areas, 4 clamping zones Automatic central lubrication system Iisdpfx Ahoh Txlco Dsh Total power: 35 kW XDNC 2.01 software with operating manual Becker pump 250/300 m³/h, 5.5 kW Additional vacuum for template work or auxiliary clamping devices Good condition. Immediately available from stock. Requires repair: Hand grips on the traverse table, rotation of the ISO30 magazine at the head.

Stanje: novo, Leto izdelave: 2024, The INDUSTRY 2.0 ATC series differs from the standard series due to the use of best-in-class, highly precise motors and drive gearboxes, which significantly enhance the machine’s processing capabilities and make it the most industrialized series in this price category. The INDUSTRY 2.0 ATC series CNC milling machine, with a working area of 2100 x 4000 mm and a Z-axis clearance of 300 mm, is equipped with a 9 kW electrospindle operating at 24,000 rpm on ceramic bearings. The machine’s worktable is manufactured using hybrid technology – it features vacuum zones and subzones that enable automatic, non-invasive clamping of the processed material, as well as T-slot grooves that allow manual clamping of irregularly shaped workpieces. ATC – The machine includes a linear automatic tool changer with a capacity of 8 tools. The automatic knife/tool changer eliminates the need for manual tool swapping by the operator. The machine can perform a wide range of operations within a single process, such as surfacing, milling, and drilling with different tools. Reinforced HEAVY DUTY construction – the machine body is made from profiles with a wall thickness of up to 10 mm. The entire frame is welded, then stress-relieved under special conditions, and finally milled. This manufacturing process delivers excellent results in terms of rigidity, stability, and vibration resistance. INDUSTRY 2.0 is a must-have for production environments that require maximum machine performance. Working Table Size: X – 2100 mm, Y – 4000 mm, Z – 300 mm Drive – Leadshine servo drives featuring 1500 W power and high holding torque (dual on the Y-axis) Transmission – The most precise NIDEC SHIMPO planetary gearboxes Chassis – PMI 25 mm linear guides and carriages with spiral diagonal stripes for maximum contact area Iijdpfxstvmcme Ah Dsh Electrospindle – 9 kW, 24,000 rpm, with full ceramic bearings Guideway lubrication system – Automatic Tool length measurement system – Automatic Control system – NK-105 G3 controller Wiring – Flameproof, flexible, and deformation-resistant Manufacturer: TechnologieCNC Model: 2140 INDUSTRY 2.0 ATC Max. travel speed in slow movements: up to 33 m/min Max. processing speed in material: up to 25 m/min Software resolution: 0.01 mm Mechanical resolution: 0.04 mm Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (ramp entry function, automatic nesting) – additional cost: 2,000 PLN net Power supply: 3PH, 400V, 50-60Hz The standard equipment of the machine includes the German BECKER VTLF 2.250 vacuum pump from the renowned BECKER brand, with a capacity of up to 244 m³/h.

Stanje: dober (rabljeno), Komfi Amiga 52 Laminiermaschine / Laminator Die Maschine ist zu 100 % funktionsfähig und sofort einsatzbereit. Iodpfx Aowt Sp Doh Dsih Es handelt sich um ein fortschrittliches, leistungsstarkes Modell, ideal für professionelle Laminierarbeiten im Dienstleistungsbereich. Die Maschine befindet sich in sehr gutem Zustand und ist bereit für den Produktionseinsatz. Baujahr: 2014. Technische Daten: Max. Bogenformat: 530 x 800 mm Min. Bogenformat: 200 x 200 mm Min. Papiergewicht: 115 g/m² Max. Papiergewicht: 600 g/m² Betriebstemperatur: 80–145°C Max. Arbeitsgeschwindigkeit: 25 m/min Integrierter Becker-Kompressor Gewicht: 600 kg Stromanschluss: 380 V Zusätzlicher Luftanschluss: 6 Bar Pneumatischer Pressdruck, Separierung sowie automatische Bogen-Zufuhr vom hohen Stapel. Bedienung über Touchpanel für einfache Handhabung. Mit Bogenausrichtungsmodul. Werkzeugsatz und Folie im Lieferumfang enthalten.

Stanje: novo, Leto izdelave: 2024, The INDUSTRY 2.0 series is distinct from the standard series due to its use of the best and most precise motors and drive gearboxes in its class, significantly enhancing the machine’s machining capabilities and making it the most industrialized series in this price segment. The INDUSTRY 2.0 series CNC router with a working area of 1500 x 3000 mm and a Z-axis clearance of 300 mm is equipped with an electrospindle rated at 6 kW, 24,000 rpm, mounted on ceramic bearings. The machine table uses hybrid technology – it features vacuum sections and subsections that allow automatic, non-invasive clamping of the processed material, as well as T-slot rails for manual clamping. Included with the milling machine is a Becker KVT 3.140 vacuum pump. Manufacturer: TechnologieCNC Model: 1530 INDUSTRY 2.0 Electrospindle: 6 kW, 24,000 rpm, on full ceramic bearings Max. traverse speed (rapid): up to 33 m/min Max. cutting speed: up to 25 m/min Software resolution: 0.01 mm Mechanical resolution: 0.04 mm Working area X/Y/Z: 1500x3000x300 mm – hybrid table (vacuum + T-slot) Isdpfxstu S Sre Ah Doih Controller: NK-105 controller High working speeds and processing stability are ensured by the Leadshine EASY-SERVO servo drives with encoders combined with drive transmission via a SHIMPO planetary gearbox. Software: CAD/CAM standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: For transport – 365 / 210 / 220 Machine assembled and ready for operation – 365 / 245 / 230 A hybrid table, i.e., a vacuum table enabling non-invasive installation of parts, while still allowing manual clamping of irregular shapes. The machine frame is fully welded, stress-relieved, and subsequently milled, ensuring precise machining and operational stability. Machine control via the DSP controller NK-105. Tool height sensor included in the scope of delivery. Central lubrication system for carriages and guides as standard. Power transmission is via a reduction gearbox. All axes (X, Y, Z) move on high-quality PMI 25 mm linear guides and bearings. LEADSHINE Easyservo dual servo drive on the Y-axis. The machine’s wiring uses high-quality fireproof cables. The electric cables used for the milling machine’s construction are flexible and protected against deformation.

Stanje: novo, Leto izdelave: 2024, CNC Milling Machine 1212 INDUSTRY 2.0 6kW 1200x1200 with Becker KVT 3.140 Vacuum Pump The INDUSTRY 2.0 series distinguishes itself from the standard line by utilizing best-in-class, high-precision motors and drive gears, significantly enhancing the machine’s machining capabilities and making it the most industrialized series in its price category. Iisdpfxotu H Tue Ah Djh The INDUSTRY 2.0 series CNC router, featuring a 1200 x 1200 mm working area and 300 mm Z-axis clearance, is equipped with a 6 kW electrospindle running at 24,000 rpm with ceramic bearings. The machine’s worktable is designed using hybrid technology—with both vacuum sections and sub-sections for automatic, non-invasive material clamping, as well as T-slots for manual clamping. Technical Data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electrospindle: 6 kW, 24,000 rpm on full ceramic bearings Max. Traversing speed (rapid): up to 33 m/min Max. machining speed: up to 25 m/min Software resolution: 0.01 mm Mechanical resolution: 0.04 mm Working area X/Y/Z: 1200x1200x300 mm – Hybrid table (Vacuum + T-slot) Controller: NK-105 G2 controller High processing speeds and operational stability are ensured by Leadshine EASY-SERVO servo drives with encoders and SHIMPO planetary gear transmission Software: CAD/CAM standard is Artcam Open 2016 Power supply: 3-phase, 400V, 50–60Hz Weight: approx. 650 kg Dimensions: For transport – 220/190/220 Assembled & operational – 220/225/230 Standard Equipment: - Hybrid worktable that enables non-invasive clamping of parts, while allowing manual fixation of irregular shapes - The machine frame is fully welded, annealed, and subsequently milled to ensure precise machining and operational stability - Machine control by DSP controller NK-105 - Tool height sensor included - Centralized automatic lubrication system for carriages and guideways - The drive is transmitted via a reduction gearbox - All axis movements (X, Y, Z) run on high-quality guideways and PMI 25-mm linear bearings - LEADSHINE Easyservo dual servo drive on the Y-axis - Machine wiring uses high-quality fire-resistant cables - All electrical cables used in the milling machine assembly are flexible and protected against deformation.