DUOFORMER VERTIKALNI - Vrhunsko razmerje med ceno in zmogljivostjo!
UNIVERSALFORMERS DUOFORMER VERTICAL Heizen und Pressen!

Name: UNIVERSALFORMERS DUOFORMER VERTICAL Heizen und Pressen!
Brand: UNIVERSALFORMERS
Availability: InStock

Leto izdelave

2026

Stanje

Novo

Lokacija

Kremsmünster Avstrija

DUOFORMER VERTIKALNI - Vrhunsko razmerje med ceno in zmogljivostjo! UNIVERSALFORMERS DUOFORMER VERTICAL Heizen und Pressen!

UNIVERSALFORMERS DUOFORMER VERTICAL Heizen und Pressen!

Prikaži karto

Podatki o stroju

Oznaka stroja:: DUOFORMER VERTIKALNI - Vrhunsko razmerje med ceno in zmogljivostjo!

Proizvajalec:: UNIVERSALFORMERS

Model:: DUOFORMER VERTICAL Heizen und Pressen!

Leto izdelave:: 2026

Stanje:: novo

Cena in lokacija

Lokacija:: Kremsmünster, Österreich

Pokliči

Podrobnosti ponudbe

ID oglasa:: A7783013

Referenčna številka:: DUOFORMER Vertical

Posodobitev:: nazadnje dne 13.01.2026

Opis

Looking for the BEST price-performance ratio? Contact us!
Machines direct from the manufacturer! THE ORIGINAL MADE IN AUSTRIA!

DUOFORMER – Heating – Forming – Pressing!
The HEATING STATION for all thermoplastic materials up to 230°C and
The VACUUM PRESS for everyday needs!
• No cumbersome fixation of pressing layers required
• No shifting of form templates
• Effortless closing and opening
• Pressing of M-shapes
• Operation accessible from all 4 sides

DUOFORMER S VERTICAL – Production without compromise!

Vertical: Workpiece height up to 850 mm
Swing door: See further offers on this platform!
Press area (LxW): 2880x1280 mm
Heating area (LxW): 2600x1250 mm
Overall dimensions (LxWxH): 3400x1750x1500 mm

• Heating drawer +230°C – 16kW
• 40 m³/h high-performance vacuum pump (BECKER)
• 4 pneumatic cylinders
• Reinforced grid frame
• Two-hand safety control
• Movement signal

Features:
Vacuum table with silicone membrane and
QUICK-CHANGE MEMBRANE SYSTEM
• Fully welded, torsion-resistant, robust steel construction
• Pressing pressure up to 9 t/m² (-900 mbar rel.)
• Analog vacuum pressure gauge
• Mechanical vacuum pressure regulator
• Transparent silicone membrane up to 230°C, 780% elongation,
40 Shore-A
• Stable, heat-resistant phenolic resin work surface 16mm with
integrated air extraction channels
• Additional vacuum connection (e.g. for external vacuum bag, vacuum clamps)
• With integrated forklift pockets
• Incl. swivel castors

Heating drawer with CAS heating system (Controlled Air Stream)
• Insertion thickness: 0 - 70 mm
• Heating capacity: max. temperature +230°C
• 2 recirculating air blowers
• Pull-out support surface with grid 30 x 30 mm
• Easily removable heating drawer

Control unit with 4” SIEMENS touch panel
• Swiveling control cabinet on the right side
• Stepless temperature control up to +230°C
• Heat time regulation with timer and alarm
• Complete with cable and plug,
Electrical connection 3~ 400 V, 50/60 Hz, 17.5 kW

Duoformer production possibilities:
● Heating and forming of SOLID SURFACE MATERIALS such as: CORIAN; HIMACS; KERROCK; HANEX; STARON; MISTRAL; AVONITE; TRISTONE; VELSTONE; WILSONART; GETACORE; RAUVISIO; VARICOR; PLEXICOR; MEGANITE; KRION; LIVINGSTONE; MARLAN; EOS; FORMICA; MYSTERA, etc.
● Heating and forming of all other thermoplastic materials such as: ABS, PMMA (Plexiglas, Perspex, Lucite), PET-G (Vivak), PE, PS, PP, PVC-U, PC (Makrolon), UPM-GRADA, RESYSTA, NFPP, etc.
Nwodpfxeiquxgj Agxef
● Vacuum press for laminating, coating, flat pressing, form bonding, veneering, edge and profile application, thermoforming, bonding, gluing, pressing

Other sizes available upon request!

DUOFORMER Maxi
Swing door: Workpiece height approx. 650 mm
Vertical: Workpiece height approx. 1000 mm
Press area (LxW): 3380x1380 mm
Heating area (LxW): 3000x1250 mm
Heating drawer +230°C – 24kW
Vacuum pumps 40m³/h, 80m³/h, 100m³/h
Overall dimensions (LxWxH): 3900x1600x1500 mm

DUOFORMER Mega
For the full length of solid surface sheets!
Swing door: Workpiece height approx. 650 mm
Vertical: Workpiece height approx. 1000 mm
Press area (LxW): 4150x1780 mm
Heating area (LxW): 3850x1250 mm
Heating drawer +230°C – 32kW
Vacuum pumps 80m³/h, 100m³/h, 140m³/h
Overall dimensions (LxWxH): 4700x2050x1500 mm

UNIVERSALFORMERS
Direct – Honest – Competent

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Dokumenti

7783013-01.pdf

Ponudnik

Registriran od: 2020

2 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+43 7583 ... oglasi

Zapomni si

Deli Prijavi oglas

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Dinkelsbühl

476 km

Tračna žaga
MEBA260 AP

Pokliči

Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd. Rezno območje 90° okroglo 260 mm ploščato 300x260 mm najmanjši premer 5 mm NC-krmiljen, avtomatski podajalnik materiala s hidravličnim popolnim vpenjanjem materiala enostavno upravljanje preko NC-krmiljenja z jasnim tekstovnim prikazom Funkcija prednastavitve materiala brez ponovnega vpenjanja pri kratkih segmentih Stabilna, linearno vodena pomična čeljust s servopozicioniranjem za maksimalno natančnost Samodejna nastavitev vodila traku glede na širino materiala Priporočene opcije: poganjana krtača za ostružke, sinhronizirana s hitrostjo traku posebej postavljena nadzorna plošča 7" CE panel, možnost omrežne povezave, shranjevanje do 1000 zapisov, zgodovinski pomnilnik za različne funkcije in podatke itd. Nwsdpfx Ash Tnd Asgxjf

Poglej podrobnosti

Mali oglas

Vakuumska membranska stiskalnica tipa VARIOPRESS Wemhöner Basic 1000 S

Bad Oeynhausen

812 km

Vakuumska membranska stiskalnica tipa VARIOPRESS
WemhönerBasic 1000 S

Pokliči

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vacuum Membrane Press Wemhöner Type VARIOPRESS Model Basic 1000 S Technical Specifications: Heating Plate Size (mm): 2850 x 1550 Njdpfx Asv Np H Hsgxewf Electric Heating Plate Design: Aluminium heating plate on top Total Pressing Force (kN): 2400 Max. Chamber Pressure (bar): 6 Max. Operating Temperature: 180 degrees Celsius Max. Batch or Workpiece Size (mm): approx. 2460 x 1180 Thermoplastic Film in Roll Form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Press Chamber Height (mm): up to max. 180 Connection Data: Installed Power (kW): approx. 46 Required Air Pressure (bar): approx. 8

Poglej podrobnosti

Mali oglas

Laboratorijska oprema - Set Shimadzu, Wyposażenie laboratorium

Olsztyn

935 km

Laboratorijska oprema - Set
Shimadzu, Wyposażenie laboratorium

Pokliči

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), V povezavi z načrtovano likvidacijo laboratorija v maju/juniju 2026 ponujamo v prodajo laboratorijsko opremo v zelo dobrem oziroma odličnem stanju – kompletno opremo. Nwedpfx Aoxmhfrjgxef Vsa oprema je bila uporabljena skladno z namenom, redno vzdrževana, tehnično popolnoma delujoča in pripravljena za takojšnjo uporabo. Ponudba med drugim vključuje: LCS MS/MS, GC MS, digestorije, spektrofotometer, stresalnike, laboratorijske hladilnike, mineralizator, vodno kopel, laboratorijsko pohištvo in še veliko več. Odlična priložnost za raziskovalne ustanove, univerze ter podjetja iz biotehnološke, kemijske in medicinske industrije za pridobitev vrhunske opreme po zelo ugodnih cenah. Možna je predhodna rezervacija posameznih naprav. Prevzem možen od maja 2026 ali po individualnem dogovoru. Vabimo vas k ogledu opreme na lokaciji na Poljskem, vojvodina Varmijsko-Mazurska.

Poglej podrobnosti

Mali oglas

Konzolni regal 3 St. Ständer für Spanplatten / 5 Ebenen Höhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

Bad Feilnbach

293 km

Konzolni regal
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

2.550 €

VB plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) Nwedpfx Aoqt Dmyegxjf - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Poglej podrobnosti

Mali oglas

Rezalni in obdelovalni center Casadei Samec ALURANGER 5016

Zamość

791 km

Rezalni in obdelovalni center
Casadei SamecALURANGER 5016

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: Njdpfxjmzbr Sj Agxewf X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Poglej podrobnosti

Mali oglas

Estonija

1.540 km

Obdelovalni center
TeknaTKE783

Pokliči

Stanje: rabljeno, Leto izdelave: 2015, Vertical CNC machining center with 3 controlled axes and an exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that secures panels and sheets using vacuum pressure. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is fitted with a set of valves that allow switching different table zones on or off, focusing the vacuum in a specific area and optimizing the clamping of small components. Capable of interpolated milling and drilling of composite panels, as well as aluminum, steel, or titanium sheets, and aluminum profiles. Tekna supplies user-friendly software that can be operated by both experienced CNC programmers and users with less experience. TKE 783 is a machining center with 3 controlled axes, designed for interpolated drilling and milling of composite panels, aluminum, steel, or titanium sheets, and aluminum profiles. Technical specification: Nwodpfxjv D A Imj Agxof Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Table dimensions: 2010 x 6300 mm Weight: 4842 kg Travel speeds: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: Used for milling aluminum up to 4 mm thick. The machine is connected and can be seen in operation and tested in Estonia. It will be prepared for transport in April–May. If you have any additional questions, we will be happy to answer them.

Poglej podrobnosti

Mali oglas

Vrtalni stroj z več vreteni Maggi Engineering Boring System 35

Juszczyn

530 km

Vrtalni stroj z več vreteni
Maggi EngineeringBoring System 35

4.250 €

Fiksna cena plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), Maggi Boring System 35 Multi-Spindle Boring Machine Nsdpfx Ajvx Aqdjgxjwf Number of spindles: 35 Spindle pitch: 32 mm Distance between first and last spindle: 1088 mm Maximum drilling depth: 85 mm Spindle speed: 2800 rpm Number of pneumatic clamps: 4 Working pressure: 6–8 bar Air consumption per cycle: 15 l Number of motors: 2 × 1.5 kW Weight: 450 kg CE certificate

Poglej podrobnosti

Mali oglas

Vakuumska membranska stiskalnica Istra TF-300HV

Egenhofen

373 km

Vakuumska membranska stiskalnica
IstraTF-300HV

18.500 €

Fiksna cena plus DDV

Pokliči

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Nsdju Egp Ijpfx Agxowf Machine height: 1750 mm Weight: 950 kg

Poglej podrobnosti

Mali oglas

Žaga za dimenzioniranje, žaga za dimenzioniranje z rezalno žago CORMAK MJ45-KB4 (3200)

Siedlce

853 km

Žaga za dimenzioniranje, žaga za dimenzioniranje z rezalno žago
CORMAKMJ45-KB4 (3200)

3.409 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Cormak MJ45-KB4 sliding table saw with scoring unit is an advanced machine, also known as a panel saw with a scorer. It is the ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials. Construction and design: Nwjdpfjtz Smijx Agxsf The Cormak MJ45-KB4 is a robust woodworking machine with a durable steel frame ensuring stability during operation. The large worktable, guided on hardened steel rods with a carriage length of 3200 mm and cutting units mounted on it, guarantees high efficiency and precision. Main cutting unit: Scoring unit: A key feature of this saw is the scoring unit, designed to eliminate internal stresses in wood by pre-scoring the underside of the workpiece. This feature makes the wood less prone to cracking and deformation after cutting. The 0.75 kW scoring unit motor ensures reliable trimming. Saw blade: The Cormak MJ45-KB4 sliding table saw is equipped with a circular saw blade as its main cutting tool. The electric motor drives the saw blade, enabling precise material cutting. With a 350 mm diameter blade, the maximum cutting height is up to 105 mm. Manual scorer adjustment: Simple and efficient manual adjustment of the scoring unit allows for quick and precise calibration. Stops facilitate restoring previous settings, while intuitive positioning near the operator’s workstation enables adjustments without interrupting workflow. Features and functions of the sliding table saw: - Large work surface: The saw features a spacious tabletop, simplifying the handling of larger sheets of material. - Smooth feed: The feed system utilizes precision-hardened steel guides with steel ball bearings, enabling longitudinal trimming even of long sheets or plywood. - Angle and cutting depth adjustment: Adjustable cutting angles and depths allow the tool to be tailored to specific project needs. - Safety systems: The saw is equipped with safety features such as guards and emergency stop systems to ensure operator safety. Applications of sliding table saws with scoring unit: Sliding table saws with scoring units are mainly used in woodworking and window manufacturing industries for cutting wood and wood-based materials. They are perfect for cutting boards, chipboards, MDF panels, and other similar materials. The Cormak MJ45-KB4 is a highly precise, advanced tool. Technical specifications: Table dimensions: 990 x 575 mm Format table length: 3200 mm Rip capacity at the rip fence: 1250 mm Cross-cut capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade height: 0–105 mm Saw blade height at 45°: 0–73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring blade speed: 8000 rpm Main motor power S1/S6: 5.5 kW / 9 HP Scoring motor power S1/S6: 0.75 kW / 1.2 HP Extraction port diameter under the table: 100 mm Extraction port diameter on blade guard: 80 mm Machine weight: 680 kg Saw supplied without cutting blades The price does not apply to machines sold in Poland.

Poglej podrobnosti

Mali oglas

Dortmund

815 km

Gredna peč
VEISCO_EB

Pokliči

Stanje: novo, Jaškovna peč, proizvajalec VEI Tip: SCO_EB koristna višina: 1200 mm koristni premer: 1400 mm zunanji premer: 2200 mm zunanja višina (brez pokrova): 1650 mm zunanja višina (z vklj. pokrovom): 2600 mm Nwsdpfsg R Snhox Agxjf električno ogrevana: 64,5 kW cirkulator: 5,5 kW trofazni priključek: 400 V, 50 Hz temperatura: max. 750°C

Poglej podrobnosti

Oglašujte tukaj