Battenfeld Ba 600 200 Cdc nakup rabljenega (117)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Battenfeld HM 2700 / 1330 Injection Moulding Machine Year of manufacture: 2004 Control system: Unilog B4 Clamping unit: Clamping force: 2,700 kN Platen size (H x V): 1,030 mm x 1,020 mm Tie bar spacing (H x V): 710 mm x 630 mm Mould opening stroke: 800 mm Minimum mould height: 350 mm Maximum mould height: --- mm Maximum daylight: 1,150 mm Hydraulic ejector – stroke: 200 mm Ejector force fwd/bwd: 59 kN Injection unit: Crodpfx Ajvt Rutefqok Screw diameter: 55 mm Ls/D ratio: 22 Injection pressure: 2,041 bar Shot volume: 653 ccm Injection weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 rpm Maximum plasticising rate: 59.3 g/s Nozzle pressure: 100 kN Electrical and hydraulic equipment: Installed heating capacity: 18.2 kW Adjustable barrel heating zones: 1+4 Oil tank capacity: 650 l Dimensions and weight: Total machine weight: 12,000 kg Dimensions (L x W x H): 5.6 x 1.8 x 2.2 m

Leto izdelave: 2001, obratovalne ure: 64.499 h, Stanje: dober (rabljeno), Conical screws, approx. 110 kg/h A.C. motor 30.0 kW New motor, 64,499 operating hours Cjdjw Hy Uuopfx Afqork

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Ø 710-1000 mm Rohr-Produktionslinie für PVC-Rohre. Crjdpfx Afevzqy Sjqek

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Clamping force: 1000 kN, tie bar distance: 470 mm / 420 mm, platen dimensions X/Y/Z: 680 mm / 590 mm, opening stroke: 500 mm, daylight: 750 mm, ejector stroke: 150 mm, ejector force: 41.2 kN. Screw diameter: 40 mm, L/D ratio: 22, injection volume: 251 cm³, shot weight: approx. 228 g, injection pressure: 2100 bar, injection stroke: 200 mm. Machine dimensions X/Y/Z: approx. 4300 mm / 1500 mm / 2000 mm, weight: approx. 4600 kg. Documentation available. An on-site inspection is possible. Crsdpfx Aew Duvbsfqsk

Stanje: dober (rabljeno), Control card, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control Crjdpfxjqku Nus Afqsk -Manufacturer: Bachmann, valve control from Battenfeld injection moulding machine -Type: PVV100 B 2537/00 -Quantity: 1x control card available -Price: per piece -Dimensions: 130/50/H30 mm -Weight: 0.3 kg/unit.

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Crjdpfxoiyyndj Afqok Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Cjdpfx Afek Rnq Neqork Clamping unit: - Clamping force: 60 t - Tie bar clearance: 370x320 mm - Maximum platen dimensions: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control unit: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 interface Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Leto izdelave: 1990, Stanje: dober (rabljeno), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is currently located in the machinery warehouse of Plastima Used Machinery. The unit, a Haul-Off R630/6V model, dates from 1990. Brand: Battenfeld Extrusionstechnik GmbH Codpfx Aferrv Uwoqerk Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4.5 kW Maximum pipe diameter: 110 mm to 630 mm

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. No.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of manufacture: 2005 Clamping Unit Clamping force: 75 tons Opening stroke: 800 mm Tie bar spacing (h x v): 405 x 405 mm Min. mold height: 150 mm Max. mold height: 480 mm Injection Unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight (PS): 27 g Injection pressure: 2440 bar Crjdpfx Afewl Rucsqok Dimensions and Weights Dimensions (LxWxH): 4.5 x 1.7 x 2.0 m Machine weight: 4500 kg

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4.500 kN, premer vijaka: 75 mm, razmak između stupova: 800 mm, delovna prostornina: 1.657 cm³, minimalna višina orodja: 300 mm, hod izmetalca: 250 mm, Oprema: dokumentacija / priročnik, Maszyna w bardzo dobrym stanie. W cenie zawarte są suszarka do tworzyw, podajnik materiału i robot 3-osiowy. Cena może być niższa, jeśli maszyna zostanie zakupiona bez tych urządzeń. Maszyna nadal pracuje i jest dostępna do oględzin. Codswf Upwspfx Afqjrk Cena dotyczy załadunku na samochód ciężarowy.

Stanje: rabljeno, Operating unit, control panel, operator panel, control unit, keyboard, display, control system, hand terminal, operator part - Manufacturer: Cyclus Battenfeld, operator part from injection moulding machine BA-T2400 / BA 600 CDC / A5002 03 1 04 - Type: MDE-BDE Cjdpfx Afogypu Doqsrk - Quantity: 3 operator parts available - Price: per piece - Dimensions: 290/50/190 mm - Weight: 0.8 kg/piece

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Crjdpfxjiyynws Afqsk Screw speed up to 130 rpm drive: 120 kW – DC (overhauled), drive via belt pulley Heating zones/controllers for downstream equipment Control cabinet, melt pressure sensor Inspection/test run available at short notice by arrangement at our Wuppertal facility. Matching accessories available on request: > Screen changer > Pelletizing system (strand, hot-cut, or water-ring) > Other options. Additional extruders and complete lines available for demonstration ex works Wuppertal. We look forward to your enquiry or visit.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Battenfeld HM 110/350 Injection Moulding Machine Year of manufacture: 2010 Control system: Unilog B6 Operating hours: 35,000 Injection unit: - Screw diameter: 35 mm - Injection pressure: 2083 bar - Injection volume: 169 ccm - Shot weight: 153 g Clamping unit: - Clamping force: 1,100 kN - Distance between tie bars: 470 x 420 mm - Minimum mould height: 275 mm - Opening stroke: 500 mm - Maximum mould height: 775 mm - Ejector stroke: 150 mm General information: - Machine dimensions (LxWxH): 4.0 x 1.5 x 2.1 m - Weight: 4,500 kg Specification: 1. Plasticising unit with Ø35mm diameter. 2. (06.X17) UNILOG B6 Euro-package including: - 07.D00 setting elements, Cjdpfxowq D Nqo Afqsrk - 02.K02 pneumatic valve with time function - 01.C01 hydraulic core pull control NW 6 on the clamping plate - 06.B21 robot interface according to EUROMAP 67 - 06.R02 two Schuko 16A sockets mounted on the side panel of the control cabinet - 06.R20 two CEE 16A sockets mounted on the side panel of the control cabinet 3. 06X06 UNILOG B6S package consisting of: - Extended controller functions with programs - APS system - Cycle time analysis - User pages - Real value graphic function visualisation with up to 16 curves - 4 envelope curves - Alarm and event logging protocol extended to 10,000 events - Quality Table function extended up to the last 10,000 cycles - Additional USB ports for network connections - Membrane keypad - SPC (Statistical Process Control for Injection Moulding) - Injection speed, plasticising and holding pressure regulated by servo valve 4 machines available, all in perfect condition.

Stanje: rabljeno, CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board -Manufacturer: Bosch, module from Battenfeld injection moulding machine -Valve Module: Bosch QV 60 -Dimensions: 220/45/H128 mm -Weight: 0.4 kg Crsdjg Td Dxepfx Afqek

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Battenfeld Injection Moulding Machine HM 300/1330 Control System: B6S Year of manufacture: 2011 Operating hours: 68,038 Clamping Unit: Clamping force [kN]: 3,000 Platen dimensions (H x V) [mm]: 1,020 x 1,030 Space between tie bars (H x V) [mm]: 710 x 610 Min./Max. mould height [mm]: 375 Maximum opening stroke [mm]: 1,150 Crodpfx Afswrmqmjqek Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 55 Injection volume [cm³]: 653 Shot weight PS [g]: 600 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Additional equipment: Pneumatic valve – 4 pcs. Core pull – 2 pcs.

Stanje: rabljeno, CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control system, plug-in cards, circuit boards, valve module, valve amplifier, PCB, analog distribution card, distribution circuit board Codpfx Afog Td D Aeqerk - Manufacturer: Bachmann, distribution circuit board from Battenfeld injection molding machine - Model: CV 4 B 2528/00 - Quantity: 3 modules available - Price: per unit - Dimensions: 100/60/H30 mm - Weight: 0.1 kg/unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tonnes) 🔹 General Information: Year of manufacture: 2017 Control Unit: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max. nozzle force: 129 mm / 950 kN Max. nozzle stroke: 525 mm Number of heating zones: 7 Crodpfjwzy N Ujx Afqjk 🔹 Clamping Unit: Clamping force: 9,000 kN Max. mould opening stroke: 1,800 mm Min. / max. mould height: 600 mm / 1,200 mm Max. daylight (between platens): 2,400 mm Tie bar spacing (H × W): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Leto izdelave: 1992, Stanje: rabljeno, Injection moulding machine - Clamping force: 25 t - Screw diameter: 22 mm - Unilog 2040 control Csdpfx Ajb A H Rnjfqork - Tie bar spacing: 250 x 250 mm - Data acquisition terminal - Part removal device, manufacturer: ASS - Temperature control unit, manufacturer: Single

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 100 mm, tlak vbrizgavanja: 1.613 letvica, odmični hod: 1.175 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Opening stroke: 1,175 mm Mold height (min./max.): 450 mm - 950 mm Platen distance: 2,125 mm Clear space between tie bars: 1,310 mm x 1,210 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,613 bar Injection volume: 3,338 cc PS injection weight: 3,038 g PE injection weight: 2,370 g Crsdpfx Afevpg E Tsqjk Plasticizing speed: 190 rpm EQUIPMENT 2 x Hydraulic core pullers 2 x Air valves Euromap 67 interface for robot

Stanje: rabljeno, CNC control, control panel, operator panel, operating unit, card slot, control cards, MC3 controller, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, analog distribution card, distribution PCB, valve amplifier, bus board, bus PCB, processor card, interface card, temperature control card - Manufacturer: Bachmann, distribution PCB from Battenfeld injection molding machine - Type: Bachmann CV 16 P7.5 : 2530/00 - Quantity: 5 cards available - Price: per piece - Dimensions: 145/80/H40 mm Codeg Tizmjpfx Afqsrk - Weight: 0.1 kg/piece

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 57212, vpenjalna sila: 4.500 kN, premer vijaka: 75 mm, tlak vbrizgavanja: 1.739 letvica, minimalna višina orodja: 425 mm, širina plošče: 1.155 mm, višina plošče: 1.195 mm, TECHNICAL DETAILS Clamping force: 4,500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Tie bar distance: 800 x 800 mm Crjdowp Iqiepfx Afqok Mounting platen dimensions: 1,155 x 1,195 mm Mold opening stroke: 760 mm Injection Unit Screw diameter: 75 mm Injection weight (PS): 1,506 g Injection volume: 1,657 cm³ Specific injection pressure: 1,739 bar MACHINE DETAILS Control system: Unilog B4 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20,400 kg Robot interface: Euromap 12 Oil tank capacity: 800 liters Hydraulic pressure: 210 bar Nominal electrical motor power: 99 A

Stanje: rabljeno, CNC control, operator panel, control panel, operating unit, card slot, control cards, MC3 controller, plug-in cards, circuit boards, valve module, valve amplifier, PCB, analog I/O card, distribution board, valve amplifier, bus board, bus PCB, processor card, interface card, temperature control card Csdehbiwijpfx Afqsrk -Manufacturer: Bachmann, control electronics modules from Battenfeld injection molding machine -Input card: Bachmann CE 32/1 B 2600/01 4x -Output card: Bachmann CA 16/P 2.5 B 2596/00 5x -Processor card: Bachmann CC 11/3 2x -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 B 4018/00 -Processor card: Bachmann STU 500 U B 2623/00 -Processor card: Bachmann STU 500 U B 4749/00 -Control card: Bachmann MF 600/1, KOP 500 U and KOP 500 Z B 2563/01 -Power supply: Bachmann SNT 411/2 -Card rack: Bachmann BUS 618/1 BALS500 B 2568/00 -Analog I/O card: Bachmann AIO 500 B 2585/00 2x -Temperature control card: Bachmann UTI 06 F1 B 2932/01 -Temperature control card: Bachmann UTR 300 -Price/Sale: complete -Dimensions (total): 435/240/H270 mm -Weight: 8.7 kg

Stanje: rabljeno, Hydraulic power unit, hydraulic pump, universal power pack, hydraulic station, injection molding machine, plastics injection molding machine, hydraulic press for plastics -Manufacturer: Flutec, hydraulic power unit taken from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus Type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Single components: see photos Codeg Dvx Nepfx Afqsrk -Dimensions: 1130/430/H350 mm -Weight: 152 kg

Stanje: rabljeno, Control panel, injection molding machine, injection moulding machine, plastic injection molding machine, plastic injection moulding machine, plastic injection molding press Cjdpfsdx Nvpex Afqork - Hydraulic control block from an injection moulding machine - Manufacturer: Battenfeld - Dimensions: 380/180/H300 mm - Weight: 17 kg

Stanje: rabljeno, Glass scale, glass measuring scale, scale, digital display, measuring scale, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear transducer, displacement sensor Crodpfxsg D H A Ao Afqok - Manufacturer: Novotechnik, displacement sensor from Battenfeld injection molding machine - Model: TLH 450 - Dimensions: 640/65/H60 mm - Weight: 1 kg