Battenfeld Ba 600 200 Cdc nakup rabljenega (125)

Leto izdelave: 1994, Stanje: rabljeno, številka stroja/vozila: 8084/77/01, Ekstruzija profila kalibrske mize Knedpfxsxghqho Ah Djc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Vbrizgalna enota Premer polža: 45 mm Vbrizgalni tlak: 2116 bar Zapiralna enota Zapiralna sila: 1300 kN Minimalna višina orodja: 275 mm Maksimalna višina orodja: 500 mm Stroj Battenfeld HM 1300/750 je bil proizveden leta 2004. Odlikuje ga zapiralna sila 1.300 kN, vbrizgalni tlak 2.116 bar in premer polža 45 mm. Opremljen je z upravljalnim sistemom Unilog CC300 B4 in omogoča uporabo orodij višine med 275 in 500 mm. Izkoristite priložnost za nakup te hidravlične vbrizgalne brizgalke Battenfeld HM 1300/750. Za več informacij nas kontaktirajte. Uporabna področja: Brizganje plastike Kodpfx Ahjwwxlmo Denc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 65.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.100 kN, premer vijaka: 35 mm, Oprema: dokumentacija / priročnik, Machine in excellent condition, ready for use and always regularly maintained. Knsdpfx Ahjwxtive Dsc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Battenfeld 4500/4500.B4 Year of manufacture: 2002 Clamping force: 450 tons Screw diameter: 80 mm Shot weight: 2,150 g Kedpfjfxg D Nox Ah Djnc Tie bar spacing: 800 x 800 mm

Leto izdelave: 2001, obratovalne ure: 64.499 h, Stanje: dober (rabljeno), Conical screws, approx. 110 kg/h Knodpfx Ahew Hy Uus Djc A.C. motor 30.0 kW New motor, 64,499 operating hours

Stanje: dober (rabljeno), Control card, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection moulding machine -Type: PVV100 B 2537/00 -Quantity: 1x control card available -Price: per piece -Dimensions: 130/50/H30 mm Kodpsqku Nuofx Ah Djnc -Weight: 0.3 kg/unit.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Battenfeld HM 3500/1900 Injection Moulding Machine Year: 2005 Clamping Unit: Clamping force: 3500 kN Platen dimensions (H x V): 1100 mm x 1060 mm Tie bar spacing (H x V): 800 mm x 710 mm Mould opening stroke: 670 mm Minimum mould height: 375 mm Maximum mould height: 710 mm Knjdpfx Ahow Dcxds Dsc Daylight: 1380 mm Ejector stroke: 250 mm Ejector force: 81 kN Injection Unit: Screw diameter: 55 mm L/D ratio: 22 Injection pressure: 2481 bar Screw stroke: 325 mm Shot volume: 772 cm³ Injection weight, PS: 710 g Injection speed: cm³/s Screw speed: 294 rpm Maximum plasticising rate: 68 g/s Number of heating zones: 1+5 Electrical and Hydraulic Equipment: Installed heating power: 45 kW Pump capacity: 26.6 kW Tank capacity: 660 l Dimensions and Weight: Machine dimensions (approx.): 7.53 m x 1.79 m x 2.31 m Total machine weight: 15,200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 85.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 75 mm, razmak između stupova: 710 mm, premer stebra: 105 mm, tlak vbrizgavanja: 1.555 letvica, minimalna višina orodja: 350 mm, izmetalna sila: 59 N, hod izmetalca: 200 mm, odmični hod: 800 mm, ogrevalna zmogljivost: 31,3 kW (42,56 KM), Oprema: USB priključek, dokumentacija / priročnik, Press ready for use, very good condition, Euromap 67, 4 hydraulic cylinders, hot runner system for 12-zone mold. Kodpfxeww D Rne Ah Denc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Battenfeld TM 4500/4500 B4 Kjdpofxg Dzjfx Ah Djnc Year of manufacture: 2002 Clamping force: 450 tonnes Screw diameter: 85 mm Shot weight: 1,870 g Tie bar spacing: 800 x 800 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Battenfeld Injection Moulding Machine HM 300/1330 Control system: B6S Year of manufacture: 2011 Operating hours: 68,680 Clamping unit: Clamping force [kN]: 3,000 Platen dimensions (h x v) [mm]: 1,020 x 1,030 Space between tie bars (h x v) [mm]: 710 x 610 Min./max. mould height [mm]: 375 Maximum opening stroke [mm]: 1,150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 55 Shot volume [cm³]: 653 Shot weight PS [g]: 600 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Knjdswrmtnspfx Ah Djc Additional equipment: Pneumatic valve – 4 pcs Core pull – 2 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Knjdpfx Ahjd Tnbhj Dsc Clamping force: 130 tons Screw diameter: 40 mm Operating hours: 77,890 h Tie bar distance: 420 x 420 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, INJECTION MOULDING MACHINE Battenfeld HM 300/1330 Control system: B6S Year of manufacture: 2011 Machine hours: 68,289 Knjdjwrmwmepfx Ah Dec Clamping unit: Clamping force [kN]: 3,000 Platen dimensions (h x v) [mm]: 1,020 x 1,030 Tie bar clearance (h x v) [mm]: 710 x 610 Min./max. mould height [mm]: 375 Maximum opening stroke [mm]: 1,150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 55 Injection volume [cm³]: 653 Shot weight in PS [g]: 600 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Additional equipment: Pneumatic valve – 4 pcs Core pull – 2 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Operating hours: 77,890 h Tie bar distance: 420 x 420 mm Knsdpfx Aod Sqrrjh Doc

Leto izdelave: 2006, Stanje: zelo dobro (rabljeno), Battenfeld Injection Moulding Machine HM 100/525 Year: 2006 Knedpfok Rnvmex Ah Djc Control System: Unilog B4 Technical Specifications Clamping force: 1,000 kN Mould platen size (HxV): 680 mm x 594 mm Tie bar distance: 470 mm x 420 mm Mould opening stroke: 500 mm Minimum mould height: 250 mm Maximum daylight: 750 mm Hydraulic ejector – stroke: 150 mm Ejector force forward/backward: 41.2 kN Injection unit Screw diameter: 40 mm L/D ratio: 22 Injection pressure: 2,100 bar Shot volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 – 318 rpm Max. plasticizing rate: 30.4 g/sec Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Heating zones (barrels): 1+3 Pump motor power: 18.5 kW Oil capacity: 275 litres Dimensions and weight Total machine weight: 4,600 kg Dimensions (L x W x H): 4.3 x 1.5 x 2.0 m

Stanje: dober (rabljeno), Leto izdelave: 1990, Battenfeld 300/050 CD Battenfeld 200/050 CD Year of manufacture: 1991, 1992 Clamping force: 30 t Clamping force: 20 t Knedpfx Ajfubkmoh Djc Screw diameter: 22 mm Shot weight: 30.4 g Tie bar spacing: 254 x 254 mm Available: 2x Battenfeld injection moulding machines

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Control system: B6S Year of manufacture: 2012 Operating hours: 65,085 Clamping Unit: Clamping force [kN]: 3,000 Platen dimensions (h x v) [mm]: 1,020 x 1,030 Knodpfx Aswrmzroh Dsc Tie bar spacing (h x v) [mm]: 710 x 630 Min./max. mould height [mm]: 375 Max. opening stroke [mm]: 1,175 Centre ring diameter [mm]: 160 Max. ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 60 Injection volume [cm³]: 913 Shot weight PS [g]: 840 Injection pressure [bar]: 2,040 Max. injection speed: 144 Additional equipment: Pneumatic valve – 4 pcs Core pull – 2 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Battenfeld Kjdpfxjr Nf Rtj Ah Dsnc BK-T 2500/1250 Schließkraft: 250 t Baujahr: 1993 Schneckendurchmesser: 60 mm Holmenabstand: 630 x 560 mm

Stanje: dober (rabljeno), Leto izdelave: 2005, Battenfeld HM 270/1330 Injection Moulding Machine Year of manufacture: 2005 Operating hours: 112,163 Clamping Unit: Clamping force [kN]: 2,700 Platen dimensions (H x V) [mm]: 1,030 x 1,020 Tie bar spacing (H x V) [mm]: 710 x 630 Min./Max. mould height [mm]: 350 Maximum opening stroke [mm]: 1,150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Knodpfxswrmrks Ah Doc Injection Unit: Screw diameter [mm]: 55 Shot volume [cm³]: 650 Shot weight in PS [g]: 565 Injection pressure [bar]: 2,040 Maximum injection speed: 144 Additional equipment: Pneumatic valve – 1 pc Core pull – 3 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld HM 1300/350 Knsdpodv Tbfefx Ah Djc Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Shot volume: 220 cm³ Tie bar spacing: 520 x 470 mm Operating hours: approx. 79,800 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Battenfeld TM Xpress 350/2250 Injection Moulding Machine Knsdpfowrm A Ajx Ah Dec Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 Clamping Unit: Clamping force [kN]: 3,500 Platen dimensions (HxV) [mm]: 1,030 x 1,140 Space between tie bars (HxV) [mm]: 710 x 710 Min./max. mould height [mm]: 300–710 Max. opening stroke [mm]: 1,380 Centring ring diameter [mm]: 160 Max. ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 65 Injection volume [cm³]: 1,171 Shot weight in PS [g]: 1,078 Injection pressure [bar]: 2,070 Max. injection speed: 600 Additional equipment: Pneumatic valve – 4 pcs Core pull – 2 pcs Knee lever system after overhaul

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Battenfeld 400-125 CDC Clamping force: 40 tons Year of manufacture: 1995 Screw diameter: 30 mm Knedpfx Ahetputie Dec Shot weight: 77.8 g Tie bar distance: 270 x 320 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Battenfeld Injection Moulding Machine TM Xpress 350/2250 Control System: B6P Year of manufacture: 2014 Operating hours: 49,458 Clamping Unit: Clamping force [kN]: 3,500 Platen dimensions (HxV) [mm]: 1,030 x 1,140 Tie bar spacing (HxV) [mm]: 710 x 710 Min./max. mould height [mm]: 300–710 Kjdpfx Ajwrm Hzeh Donc Max. opening stroke [mm]: 1,380 Centring ring diameter [mm]: 160 Max. ejector stroke [mm]: 200 Injection Unit: Screw diameter [mm]: 65 Injection volume [cm³]: 1,171 Shot weight in PS [g]: 1,078 Injection pressure [bar]: 2,070 Max. injection speed: 600 Additional Equipment: Pneumatic valve – 4 pcs Core – 1 pc Knee-joint mechanism after overhaul

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Wittmann Battenfeld EcoPower 110/130 Injection Molding Machine Electric, energy-efficient machine Control system: UNILOG B6 Year of manufacture: 2011 Clamping force: 110 tons Screw diameter: 25 mm Maximum shot weight: 55.8 g (PS) Tie bar distance: 470 x 470 mm Minimum mould height: 200 mm Maximum mould height: 450 mm Kodpfxorn I Nrj Ah Dsnc Hydraulic operating pressure: 210 bar Machine weight: 4,600 kg Dimensions (L x W x H): 420 x 140 x 270 cm Battenfeld has approximately 60,000 hours (the computer was replaced and the hours were not transferred; currently, the displayed hours are 4,944).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Battenfeld HM 110/350 Injection Moulding Machine Year of manufacture: 2012 Control system: Unilog B6 E Knodpfeu U Ar Isx Ah Doc Injection unit: Screw diameter: 35 mm Injection pressure: 2,083 bar Shot volume: 169 ccm Shot weight: 153 g Clamping unit: Clamping force: 1,100 kN Distance between tie bars: 470 x 420 mm Minimum mould height: 275 mm Platen opening: 500 mm Maximum mould height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (LxWxH): 4.0 x 1.5 x 2.1 m Weight: 4,500 kg Equipment: - Machine is in very good condition and has 35,000 operating hours. - Bimetallic system - 1 x pneumatic valve - 1 x core pull - Interface for robot according to EUROMAP 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, WITTMANN BATTENFELD Injection Moulding Machine TM 400/3400 Control System: UNILOG B6P Year of manufacture: 2015 Total operating hours: 33,756 ServoPower SO Package: Variable-speed servo drive for the hydraulic pump, designed to increase energy efficiency and reduce cycle times in accordance with EUROMAP 60 Cycle II and Cycle III standards. _____ Ksdpswqd Tcjfx Ah Donc Injection unit technical specifications: • Screw diameter: 85 mm • L/D ratio (length-to-diameter): 22 • Specific injection pressure: 1,574 bar • Calculated injection volume: 2,128 cm³ • Max. injection weight (PS): 1,936.4 g _____ Clamping unit technical specifications: • Clamping force: 4,000 kN • Clear space between tie bars: 710 × 710 mm (W × H) • Minimum mould height: 300 mm • Maximum platen distance: 1,380 mm • Opening stroke: 670 mm