Bale Ovoj nakup rabljenega (479)

Leto izdelave: 2013, stanje: rabljeno, Technical Data for Bale Opener Line for RDF, MSW, Paper, Cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of Manufacture: 2015 Number of Bales Opened: 674 Operating Time: Only 3 days, exclusively during commissioning of the entire system at new installation Opening Time: approx. 45 seconds per bale Bale Dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum Bale Weight: 2,000 kg System Discharge Height: 1,400 mm Maximum Conveyor Width: 1,200 mm Material to be Opened: RDF/MSW System Availability: 98% Noise Level of Bale Opening Line: 85 dB(A) Total Connected Load: 37 kW Rated Current: 125 A Operating Display: SIEMENS SIMATIC HMI Touch Control System: SIEMENS S7 ET200S Machine Dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of Supply: - Feed Conveyor 3,500 x 1,200 x 1,400 mm - Infeed Conveyor to Opener 1,500 x 1,200 x 1,400 mm - Bale Opener (gripper with cutter) Special Equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for Short Operating Time: Iedpfx Aju Tg I Djdkoap The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The purpose of the installation was to allow municipal waste to be received, baled, wrapped, and stored in case of a plant malfunction or maintenance, until normal operation resumed. After the issue was resolved, all bales would then be opened and the waste fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned and subsequently never used in regular operation. Only during initial commissioning in 2015 were 674 bales opened over three days. The system is in excellent, ready-to-use condition. Due to plant modifications, the installation area is needed for other purposes, and the complete line is therefore offered for sale. Brief Description of the Bale Opening Process: The compressed bales are placed onto the infeed conveyor from the side or rear using a forklift. For opening, the bales must be positioned with the wire or twine binding running horizontally to the conveyor; otherwise, bales must be rotated 90°. The infeed conveyor moves each bale to the cutting unit. The grippers hold the wire or twine strapping firmly. The rotating knife cuts the bale lengthwise. The gripper then returns to its initial position. The opened bale is then conveyed to the discharge chute and drops onto the subsequent conveyor system. Notes: Original price of the complete system was €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. The system has been dismantled into transportable units, stored, and is available for inspection and loading at short notice. No liability is assumed for the technical specifications or any potential errors.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Baling Press Dixi 60 SLD, Year of Manufacture 2015 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year: 2015 Drive Power: 7.5 kW, 400 V / 32 A Filling Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370-410 kg Tying: triple, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Suitable Materials: Paper, Cardboard, Film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Operating manual and CE declaration are included. Inspections, including under power, are possible at any time by prior arrangement. On request, we can also perform test runs with your material, subject to a service charge. Iodpfx Adjyba Amokeap Should you have any questions regarding the machine, feel free to contact us by phone from Monday to Thursday between 08:00 and 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on manufacturer information. We do not accept liability for the stated information or possible errors. The offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections can be arranged by appointment. The sale is ex works, with payment in advance, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Baler Dixi 60 SLS, year of manufacture 2013 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Iaodpfxsyba Agj Adkjp Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Inspections, including under power, are possible at any time by arrangement. Upon request, we can also carry out test runs with your material for a service fee. If you have any questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information provided or for any possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by arrangement. Sale is ex works against prepayment, without warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 1.030 h, Funkcionalnost: popolnoma funkcionalen, Bale Press Dixi 80 SLD with Lifting/Tilting Device, Semi-Automatic, Year of Manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2016 Operating hours: 1,030 Drive power: 11 kW, 400 V / 32 A Iodjybaz Aspfx Adkoap Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, Cardboard, Film Remarks: The press is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find a video on our website or YouTube channel. The hydraulic hoses should be replaced. Viewings, including under power, are possible at any time by prior arrangement. Upon request, we also carry out tests with your material for a fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We accept no liability for the information provided or for any errors. The offer is subject to change, prior sale reserved, and can be withdrawn at any time. Viewings by appointment. Sale against prepayment, ex works, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Balerka Dixi 60 SLD, letnik 2012 Iasdoybazijpfx Adkjp Proizvajalec: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Letnik: 2012 Pogonska moč: 7,5 kW, 400 V / 32 A Vhodna odprtina: 990 x 1.110 mm (Š x D) Pritisna sila: 60 t Cikel stiskanja: pribl. 47 s Velikost bale: 800 x 1.100 x 1.200 mm (Š x V x D) Teža bale: pribl. 370-410 kg Vezava: 3-kratna, ročna Mere stroja: pribl. 4.150 x 1.725 x 2.035 mm (D x Š x V) Teža stroja: pribl. 5.420 kg Material: papir, karton, folija Prosimo upoštevajte: Vsi tehnični podatki temeljijo na navedbah proizvajalca. Za točnost podatkov in morebitne napake ne prevzemamo nobene odgovornosti. Ponudba je nezavezujoča, vmesna prodaja možna in si jo pridržujemo pravico kadar koli preklicati. Ogled stroja je mogoč po dogovoru. Prodaja poteka EXW, z avansnim plačilom, brez garancije ali jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Vertical Baler Dixi 50 S, Year of Manufacture 2019, Very Good Condition Technical Specifications Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of Manufacture: 2019 Drive Power: 7.5 kW Pressing Force: 50 t Pressing Cycle: 23 s Filling Opening: 1200 x 620 mm Filling Height: 1000 mm Bale Size: 1200 x 800 x 830 mm Iaodpfx Adeybapaoksp Bale Weight: 300-350 kg Tying: Manual Transport Dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewing, including under power, is possible at any time by arrangement. On request, we can also carry out tests with your material for a service fee. If you have any questions regarding the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Viewings by prior arrangement. Sale is ex location, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2018, obratovalne ure: 40.350 h, Funkcionalnost: popolnoma funkcionalen, Baler Presona LP 85 VH2 with Cross-Tie System, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of Manufacture: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: approx. 22,000 Prepress Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450 - 650 kg Iodpfx Aeybaniodkeap Theoretical Throughput: 1,200 m³/h Practical Throughput (at 30-100 kg/m³): 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Transport Dimensions (Press): 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical specifications are based on manufacturer’s information. We accept no liability for the above details or potential errors. This offer is subject to change, prior sale reserved and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment only, without warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Vertical Baler Dixi 50 S, Year of Manufacture 2019, Very Good Condition Technical Specifications Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of Manufacture: 2019 Drive Power: 7.5 kW Pressing Force: 50 t Pressing Cycle: 23 s Filling Opening: 1200 x 620 mm Filling Height: 1000 mm Bale Size: 1200 x 800 x 830 mm Bale Weight: 300-350 kg Tying: Manual Transport Dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Iodpfx Adjybal Usksap Remarks: The machine is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewing, including under power, is possible at any time by arrangement. On request, we can also carry out tests with your material for a service fee. If you have any questions regarding the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Viewings by prior arrangement. Sale is ex location, without warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Vertical baling press Dixi 50 S, year of manufacture 2020, very good condition Technical data: Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2020 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Binding: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Suitable materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC declaration of conformity are available in German. Remark: The machine is in very good, as-new condition. The seals on both cylinders for the retaining clamps have been renewed. The machine has been inspected and tested at our site in 28816 Stuhr. A video is available on our website or our YouTube channel. Iedpfoybak Rex Adkeap Viewing, including under power, is possible at any time by prior arrangement. Upon request, we can also perform test runs with your material for a handling fee. For questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept any liability for the information given or for possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Viewings are possible by arrangement. The sale is ex location, without warranty or guarantee.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 38 t, Stiskalni kontejner MPC 20 PE Iedpoyiltqsfx Adksap

Stanje: rabljeno, številka stroja/vozila: 41782, Einlauf aus Edelstahl 1500 mm, Backenbreite 200 mm, temperaturverstellbare Backen- bzw. Flossendichtungen, Gesamtlänge 2500 mm Iaodpedg H Svofx Adkep

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina odprtine za polnjenje: 1.600 mm, dolžina polnilne odprtine: 2.200 mm, širina bale: 400 mm, višina bale: 400 mm, skupna širina: 3.345 mm, skupna višina: 3.160 mm, skupna dolžina: 7.440 mm, vhodna napetost: 380 V, skupna masa: 28.000 kg, moč: 55 kW (74,78 KM), Oprema: dokumentacija / priročnik, Balirni stroj 400 x 400 mm. Zelo dobro stanje. Dobro vzdrževan. Ijdpfxjxcazwo Adkoap

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.856 h, Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 12.000 mm, Stiskalnica Obnovljena 12 m dolžine Vse brezhibno Ijdpfxexfg Sbj Adksap V delujočem stanju. Nahaja se na sedežu podjetja.

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 1.932 h, Funkcionalnost: popolnoma funkcionalen, Baling Press Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tip device Technical Data: Manufacturer: Presto Model: CC 50 M Year of Manufacture: 2015 Operating Hours: 1932 Pressing Force: 50 t Cycle Time: 52 s Drive Power: 7.5 kW Filling Opening: 1030 x 1100 mm Filling Volume: 0.85 m³ Iaodox Uz Dajpfx Adkjp Tying: triple, wire, manual Throughput Rate at Bulk Density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale Dimensions: 750 x 1100 mm Bale Weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine Weight: approx. 4000 kg Materials: Paper, Cardboard, Film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us at 28816 Stuhr. The video can be found on our website or on our YouTube channel. Viewings, including under power, are possible at any time by arrangement. Upon request, we can also carry out tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the details provided or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Viewing by arrangement. Sale is ex works, pre-payment required, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.022 h, Funkcionalnost: popolnoma funkcionalen, Bale Press Presto CC 20 M, Year of manufacture 2019, Pressing force 20 t, with retention device. Technical Data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 3-fold, manual Throughput at bulk density of: 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: Paper, cardboard, film Remarks: The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. The video can be found on our website or our YouTube channel. Inspections under power are possible at any time by appointment. Upon request, we can also carry out tests with your materials for a fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, you can reach us from 08:00 to 13:00. Please note: All technical data is based on the manufacturer’s specifications. We do not accept liability for the information provided or for possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Iaedpfx Adox Uzynjkop Inspections are possible by appointment. The sale is made ex-works, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 1.640 h, Funkcionalnost: popolnoma funkcionalen, Baler Presto CC 40 M Technical Data: Manufacturer: Presto Model: CC 40 M Year of Manufacture: 2017 Pressing Force: 40 t Cycle Time: 34 s Drive Power: 15 kW Feed Opening: 1080 x 1100 mm Feed Volume: 0.85 m³ Tying: 4-fold, polyester strap, manual Throughput capacity at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale Dimensions: 750 x 1100 mm Bale Weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine Weight: approx. 3800 kg Iaodpsx Uzxksfx Adkop Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Operating manual and EC Declaration of Conformity are included. Note: Channel discharge is fully automatic and adjustable. Viewing, including under power, is possible at any time by appointment. On request, we can also carry out tests with your material for a service fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We do not accept any liability for the information provided or any possible errors. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Viewings are possible by appointment. Sale is ex works with advance payment, without warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 24.955, teža bale: 600 kg, Oprema: dokumentacija / priročnik, KONTI-275 B Balers – Performance, Reliability, and Efficiency in Material Compaction Discover the KONTI-275 B Baler, the ideal solution for efficient processing of plastic, cardboard, and other recyclable waste. Engineered for maximum performance, this industrial baler is perfect for companies looking to optimize storage space and reduce waste volume. Key Features: - Impressive pressing force with a capacity of up to 200 bar, ensuring effective material compaction in a short time. - Variable bale weight, ranging from 20 to 600 kg, depending on the processed material and compression settings. - Advanced hydraulic system using ISO VG 68 hydraulic oil, providing constant and efficient operation even under intensive use. Ijdpfsuqxpcex Adkoap - Compact and robust dimensions, optimized for industrial environments, with a range of feeding options and workflow adaptability. - Automation and safety: the baler is fully automated, ensuring easy operation under maximum safety conditions, reducing risk of damage. Benefits: - Significant reduction in waste volume, saving both space and transportation costs. - Fast and efficient operation, thanks to complete automation and uninterrupted workflow. - Minimal maintenance, with clear service recommendations to ensure long equipment lifetime. - Versatility: suitable for a wide range of materials, from plastic and cardboard to other recyclable waste.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Scraper conveyor with belt length: 5 m Box width: 0.55 m Iaedpfjd H Twijx Adkep Box height: 0.5 m Internal width: 0.38 m Scraper spacing: 500 mm Incline: 30° Discharge height: 2.5 m with slewing ring for swivelling without drive motor

Stanje: delavnici obnovljeno (rabljeno), dolžina bale: 1.200 mm, širina bale: 700 mm, višina bale: 800 mm, teža bale: 380 kg, Stiskalnica v idealnem stanju po obnovi, neuporabljena. Servisirana izključno pri proizvajalcu. Popolno stanje. Popolnoma avtomatsko delovanje. Nastavljiva dolžina bala 600-1200 mm. Teža bale cca 380 kg. Iajdpox S Sbdofx Adkep

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6422.P01.347, teža bale: 100 kg, vrsta vhodnega toka: trifazni, moč: 7,5 kW (10,20 KM), leto zadnje generalne obnove: 2023, Stroj je priložen s celotno električno shemo. Iedpfx Asxz Avuodkeap

Stanje: skoraj kot novo (rabljeno), zasnovan za pakiranje živil na pladnjih, kot so sadje, zelenjava, meso, ribe, sir, perutnina, za ohranjanje svežine in vizualne predstavitve; minimalne dimenzije paketa 90 mm D x 110 mm Š x 10 mm V, maksimalne dimenzije 200 mm D x 300 mm Š x 160 mm V; širina folije 280 mm - 550 mm; leto izdelave 2004 Isdpod Dcyrofx Adkeap

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 69000, vhodna napetost: 400 V, vhodni tok: 1 A, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vrsta zaščite (IP koda): IP54, Profesionalna sestavljalna stiskalnica Prym Fashion, tip NE 18/3 K, letnik 2004, v zelo dobrem in popolnoma delujočem stanju. Stiskalnica je popolnoma opremljena s Prym krmiljenjem, podajalnimi/vrtečimi moduli, nožnim upravljanjem in varnostnimi napravami. Upravljanje je mogoče v ročnem, polavtomatskem in avtomatskem načinu, kar omogoča prilagodljivost za različne uporabe in proizvodne serije. Priklop 3×400 V / 50 Hz. Ogled in testiranje pod napetostjo sta mogoča. Iodpfoyhnmmox Adkeap

Stanje: rabljeno, Leto izdelave: 2019, Presse à chambre – Presse à balles – Presse pour matières premières Bramidan X30 AD, occasion Iodpexvyn Defx Adksap 🧰 Caractéristiques du produit • Fabricant : Bramidan • Modèle : X30 AD • État : d’occasion, voir photos • Couleur : orange • Année de fabrication : 2019 • Dimensions : env. 1760 x 1255 x 2295 mm • Poids propre : 1650 kg • Force de compression : 300 kN • Temps de cycle : 25 secondes • Puissance : 4 kW • Tension : 3 x 230 - 440 V / 50/60 Hz • Niveau sonore : 59 – 60 dB • Poids des balles : plastique jusqu’à 425 kg, carton jusqu’à 350 kg 💰 Prix : 8 900 € net hors TVA. • Remise sur quantité : sur demande • Frais de port : Europe entière sur demande • Délai de livraison : disponible immédiatement • Visite et enlèvement : à tout moment sur rendez-vous Plus de 5 000 mètres linéaires de rayonnages à palettes de nombreux fabricants en stock en permanence (Sous réserve de modifications et d’erreurs dans les données techniques, informations et prix ainsi que de vente intermédiaire ! Voir nos CGV, tous les prix s’entendent hors TVA départ stock.)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours (as of August 2025) Pressing Force, Main Press: 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Motor Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Rates: - Bulk density 20 kg/m³: up to 6 t/hour, depending on material - Bulk density 50 kg/m³: up to 13 t/hour, depending on material Bale Weight: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Control Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Iedpfxevtpq Ho Adkoap Oil Type: HVI 46 Machine Dimensions with Bale Chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (Baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (Baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire reel boxes for 8 pieces of 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right side and can be folded down to the rear for transport. The baler has been partially overhauled and tested in our workshop—see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment possible. We assume no liability for technical specifications or potential errors.

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Stretch Wrapper Type MP-206 Compact, semi-automatic stretch wrapper with modern PLC control, including color soft-touch display and film pre-stretching. EU Declaration of Conformity. Machine construction in accordance with the current Machinery Directive 2006/42/EC (valid since 29.12.2009). Details and Technical Data Dimensions • Length: 2,500 mm • Width: 1,500 mm • Turntable diameter: 1,500 mm • Turntable height: 70 mm • Machine weight: 600 kg • Column height: 2,580 mm Iaedpfx Aeuufh Hodkop • Max. pallet height: 2,400 mm • Max. pallet weight: 2,000 kg • Voltage: 230V, 1Ph+N+PE, 50Hz, 16A Technical Features • Electronically controlled soft start of the turntable • Simple, quick change of the stretch film roll • Adjustable film pre-stretch by exchanging gear sets (150%, 200%, 300%) • Photo cell for automatic height sensing • Infinitely variable turntable speed between 0-15 rpm • Intuitive operation via color soft-touch display Control Panel with: 1.) Color soft-touch display 2.) Wrapping start button 3.) Emergency stop switch 4.) Main switch Display Settings • Adjustable number of bottom wraps • Adjustable number of main wraps • Adjustable number of top wraps • Special function for applying top sheets