Arburg A 221 75 350 Art 617 nakup rabljenega (308)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Screw diameter change possible Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m Knjdpfx Ahjxd Twhs Dec All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 75.942 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 213141, vpenjalna sila: 400 kN, premer vijaka: 18 mm, razmak između stupova: 270 mm, Oprema: dokumentacija / priročnik, Here we offer, as a specialist dealer in injection molding machines, the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines with a year of manufacture from 2010 onwards. We have been wholesalers of injection molding machines for more than 25 years. Manufacturer: Arburg Model: 270C 400-70 Control system: Selogica Year of manufacture: 2010 Operating hours: 75,942 h Machine number: 213141 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter chute Kedpfxewfua Ae Ah Dsnc - German language - Single ownership – origin Germany Regular maintenance by manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 t Tie-bar distance: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between plates: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical Pump: 11 kW Heating: 4 zones, 4 kW Installed load: 15 kW Pre-fuse: 50 A Weight: 2,150 kg Warranty Warranty until initial commissioning Loading/Shipping Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hanover, Germany For your information regarding the machines and our company: - We only sell machines acquired from ongoing production out of our own stock in Hanover - All machines offered have been checked and tested before dismantling - We do NOT deal in insolvency goods – we are NOT brokers dealing with third-party assets - All offered machines come from successful companies for whom maintenance and servicing are a matter of course - All machines offered can be viewed at our warehouse

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 57.430 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 183899, vpenjalna sila: 600 kN, skupna masa: 2.330 kg, Brizgalni stroj Arburg naprodaj Leto izdelave: 2001 Stanje: Zelo dobro vzdrževan, redno in pravočasno servisiran Ogled: Do nedavnega v obratovanju, trenutno še pod napajanjem in na voljo za ogled na lokaciji kadarkoli Kedpfx Ahoxdz I Ue Denc Pripravljen za uporabo: Na voljo takoj in popolnoma delujoč Stroj je v zelo dobrem stanju in je neposredno uporaben. Prodaja se brez orodja in podajalnika. Več podrobnosti na zahtevo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 38.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2 letvica, izmetalna sila: 225 N, hod izmetalca: 90 mm, dolžina plošče: 900 mm, širina plošče: 900 mm, skupna dolžina: 6.400 mm, skupna širina: 1.950 mm, skupna višina: 2.210 mm, skupna masa: 12.140 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, prosta razpetina: 900 mm, Oprema: dokumentacija / priročnik, Inventarna št.: 503409 Proizvajalec: ARBURG Model: Allrounder 630 S 2500-800 Selogica Leto izdelave: 2012 Obratovalne ure: 38.000 h Zapiralna sila: 2.500 kN Ksdpfoxf Hy Ssx Ah Djnc Razmik med vodili (vod.), širina x višina: 630 x 630 mm Velikost plošče, širina x višina: 900 x 900 mm Minimalna vgradna višina: 300 mm Maksimalna vgradna višina: 700 mm Maksimalen razmik med ploščama: 900 mm Odpiralna pot: 600 mm Premer polža: 50 mm Prostornina hoda: 392 ccm Tlak brizganja: 2.000 bar Oprema Zaslon z nemškim besedilom CEE vtičnica 16A Compact Flash vmesnik za shranjevanje podatkov Hidravlični izvlek jedra 1x Zračna ventilacija 2x Stroj z vodno baterijo Stroj brez dozatorja materiala Stroj brez sesalnega transporta Nastavljivi nivelirni elementi Vmesnik EUROMAP 67 Vmesnik OPC Schuko vtičnica 10A Selektivna enota Dimenzije stroja (d x š x v): 6,4 m x 1,95 m x 2,21 m Skupna masa: 12.140 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 23.400 h, 1,0 kos rabljeni brizgalni stroj Proizvajalec: ARBURG Tip: 420C1000-250 Leto izdelave: 2001 Zapiralna sila: 100 ton Razmak med vodili: 420 x 420 mm Premer polža: 40 mm Dozirni volumen: 188 cm³ Teža brizganca: 172 g/PS Upravljanje: SELGOCIA Kodpfx Ahjw U Ebbj Denc Oprema: -Odjemalec livnega kanala, proizvajalec: GEIGER

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Clamping force: 150 tons Opening stroke: 500 mm Mold height: 250 mm Distance between mounting plates: 750 mm Tie bar spacing: 470 x 470 mm Mold mounting plates (W x H): 650 x 650 mm Ejector stroke: 175 mm Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight: 184 g Operating hours: 38,929 h Core pulls: 1x Air blower: 1x Dimensions (L x W x H): 4900 x 1750 x 2100 mm Knjdpfx Ahow Ryvrj Dsc Weight: 4,590 kg Can also be purchased with APEX robot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 05/2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Metering volume: 34 cm³ Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Knsdpfx Aexd Tv Roh Djc Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface 2x air valves 1x hydraulic core pull Injection unit hardened – bimetallic Main drive motor – servo motor with inverter for energy saving Proportional valve on the injection unit – precise injection Self-closing nozzle Arburg Multilift Select 6 kg transverse robot Year of manufacture: 05/2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: Upon request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 58.263 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 203130, premer vijaka: 25 mm, delovna prostornina: 59 cm³, injekcijska masa: 54 g, Oprema: dokumentacija / priročnik, Here we offer, as a dealer of injection moulding machines, the following well-maintained used injection moulding machine: We are also actively purchasing well-maintained injection moulding machines manufactured from 2010 onwards. As a wholesaler of injection moulding machines, we have been in business for over 25 years. Manufacturer: Arburg Model: 320C 500-170 Serial number: 203130 Year of manufacture: 2007 Operating hours: 58,263 h Dimensions (L/W/H): 3.12 x 1.43 x 1.99 m Weight: 2,300 kg Functionality: Fully operational Condition: Very well maintained Extras: - Handling interface - Thermoplastic screw/barrel 25 mm, highly wear-resistant Control system: Selogica Injection unit: Screw diameter: 25 mm Shot weight: 54 g / PS Injection pressure: 2,500 bar Shot volume: 59 cm³ Clamping unit: Clamping force: 50 t / 500 kN Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Mould installation height: 200 mm Max. platen distance: 550 mm Ejector stroke / force: 125 mm / 30 kN Clamping unit: Hydraulic Drive power: 11 kW Heating power: 9.4 kW Kjdpfx Ahjv U Tl Dj Dsnc Total power: 21 kW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - German language - From first ownership – origin Germany - Regular maintenance by manufacturer and previous owner Warranty: Warranty until initial commissioning Loading/Shipping: Loaded onto buyer’s truck free of charge, or delivered free to destination against freight reimbursement. Available immediately ex our warehouse in Hanover, Germany. Information about our offered machines and our company: - We only sell machinery purchased for our own ongoing production, directly from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods – we are NOT a broker dealing in third-party property - All machines offered come from successful companies where regular maintenance and care are standard practice - All offered machines can be inspected at our warehouse

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Zapiralna sila: 3200kN, premer polža: 45mm, največja vgradna višina: 800mm, razmak med stebri: 720mm, izvlek jedra: 1, krmiljenje: Selogica, obratovalne ure: 72.520h, ciklov: približno 28 milijonov. Dokumentacija je na voljo. Možen je ogled na lokaciji. Knodoxfvhlspfx Ah Dsc

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 72.154 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 25 mm, Skladiščna št.: 503576 Proizvajalec: ARBURG Tip: Allrounder 900 T 800-150 Krmiljenje: Leto izdelave: 2010 Obratovalne ure: 72154 h Zapiralna sila: 800 kN Razdalja med vodili (v x š): 900 x 900 mm Minimalna vgradna višina: 250 mm Največja razdalja med ploščami: 550 mm Odpiralna pot: 300 mm Premer vrtljive mize: 900 mm Premer polža: 25 mm Prostornina brizganja: 54 ccm Tlak brizganja: 2500 bar Dolžina polža: 24 l/d Oprema: Prikaz na zaslonu v nemščini Zračni ventil 1x Stroj z vrtljivo mizo Stroj z vodno baterijo Nivelirni elementi Vmesnik BDE Mere stroja D x Š x V: 3,8m x 1,85m x 2,15m Skupna teža: 5000KG Ksdpfoxf Hvtex Ah Donc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 58 h, Splošni podatki Mere širina: 4360 mm Mere globina: 1718 mm Kedpjxfw D Iofx Ah Dsnc Mere višina: 3910 mm Teža stroja: 7600 kg Vbrizgalna enota Premer polža: 35 mm Tlak vbrizgavanja: 2500 bar Zatezna enota Zatezna sila: 1000 kN Ta stroj za brizganje Arburg ALLROUNDER 1200 t 1000 - 400 je bil izdelan leta 2018 v Nemčiji. Ima 58 delovnih ur. Stroj ima zatezno silo 1000 kN, je kot nov, rabljen samo za testiranje. Stroj mora kupec pridobiti CE certifikat, več ponudb imamo od tretje osebe, najnižja od 2.000 €. Vrsta uporabe Brizganje plastike

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 79.941 h, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, razmak između stupova: 570 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 184 g, minimalna višina orodja: 250 mm, Arburg 570A-1600-400 (244) hibridni brizgalni stroj s sortirno loputo Številka: 244 Razpoložljivost: na zalogi Leto izdelave: 2007 Proizvajalec: Arburg Premer polža [mm]: 40 Količina brizga [g]: 184 Tlak vbrizgavanja [bar]: 2000 Zapiralna sila [kN]: 1600 Razmak med stebri [mm]: 570 x 570 Velikost plošč [mm]: 790 x 795 Min. višina orodja [mm]: 250-550 Tip upravljanja: Selogica Jezik: angleščina, nemščina Kjdpfexdlwyox Ah Denc Vgrajena moč [kW]: 21.2 Delovne ure [h]: 79941 Teža [kg]: 9000 Dimenzije [mm]: 5100 x 2000 Dovajalni lijak: NE Reža za robota: Da Zračni ventil: 6x

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 680CB 400-170 / Vertical Injection Moulding Machine, Tie-Barless / Very Good Technical Condition Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm Shot weight: 54 g Injection pressure: 2500 bar Ksdpfjxd Tuyex Ah Djnc Dosing volume: 59 ccm Clamping unit: Clamping force: 40 t Tie-bar spacing: 0x0 mm (tie-barless) Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical injection moulding machine, tie-barless Euromap 67 interface Robot interface 3x air valves 3x hydraulic core pulls Control with 12 hot runner zones Hardened bimetal injection unit Proportional valve on the injection unit – precise injection Screw diameter exchangeable Machine regularly serviced by authorised Arburg service Original Arburg tool crane Dimensions: Weight: 6,500 kg Length/Width/Height: 1.97 x 1.69 x 3.40 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 72.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 208574, Oprema: dokumentacija / priročnik, Here, as a trading company for injection molding machines, we are offering the following well-maintained used injection molding machine: We are, of course, also actively purchasing well-maintained injection molding machines from model year 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year: 2008 Operating hours: 75,942 h Machine number: 208574 Extras: Ksdpfx Ahown Nr Ee Djnc - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Part separator - German language - One previous owner – origin Germany Regular maintenance by manufacturer and previous owner. Clamping unit: Clamping force: 400 kN / 40 t Tie bar spacing: 270 x 270 mm Platen size: 446 x 446 mm Opening stroke: 350 mm Minimum mold height: 200 mm Max. distance between platens: 550 mm Ejector stroke: 125 mm Max. ejector force: 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2500 bar Electrical equipment: Pump: 11 kW Heating: 4 zones, 4 kW total installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty Warranty valid until initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery by arrangement (freight charges extra) Available ex stock Hanover, Germany Additional company and machine information: - We only sell machines purchased from active production from our warehouse in Hanover - Every machine offered is inspected and tested before decommissioning - We do NOT sell bankruptcy assets – we are NOT brokers dealing with third-party assets - All machines offered originate from successful businesses, for whom maintenance and care are a given - All machines offered can be viewed at our warehouse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 250 kN, premer vijaka: 25 mm, razmak između stupova: 270 mm, delovna prostornina: 39 cm³, injekcijska masa: 36 g, minimalna višina orodja: 200 mm, moč: 10,2 kW (13,87 KM), Leto izdelave 2003 Zapiralna sila 25 ton Razdalja med stebri 270 x 270 mm Kedpfx Asxgiaqeh Donc Premer polža 25 mm Volumen vbrizga 39 ccm Teža vbrizga 36 g za PS Oprema: transportni trak, manipulator, izvlekač jedra, Euromap Po popolnem pregledu!

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Zaloga št.: 503460 Proizvajalec: ARBURG Tip: Allrounder 1200 TS 400-150 Krmiljenje: Leto izdelave: 1998 Tehnični podatki zapiralne enote Zapiralna sila: 400 kN Minimalna vgradna višina: 250 mm Maksimalna razdalja med ploščama: 550 mm Odpiralni hod: 300 mm Premer polža: 25 mm Volumen brizganja: 54 ccm Tlak brizganja: 2500 bar Oprema Besedilo na zaslonu v nemščini CEE vtičnica 16A Vrtljiva miza Nivelirni elementi Schuko vtičnica 10A Ksdpjxf E Syofx Ah Denc Mere stroja D x Š x V: 4,1 m x 1,75 m x 2,6 m Skupna teža: 8000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke: 350 mm Mould height: 200 mm Tie bar spacing (vertical): 320 mm Tie bar spacing (horizontal): 320 mm Mould mounting plates: 446x446 mm Injection pressure: 2240 bar Injection flow rate: 124 cm³ Ejector stroke: 125 mm Kedpfx Aheu Dmgqe Dsnc Ejector force: 30 kN Net weight: 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader Machine tested English language user interface

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 40.226 h, številka stroja/vozila: 221240, Here, as a trader specializing in injection moulding machines, we offer the following well-maintained, pre-owned injection moulding machine: Of course, we also purchase well-maintained injection moulding machines with year of manufacture from 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 370S 700-290 with equipment for vertical injection Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition: very well maintained Extras: - Device for vertical injection - 1 core pull circuit - Additional heating band connection - 5 free manually regulated cooling circuits - Air valve connection controlled via Selogica - Equipment packages: quality assurance, documentation, extended monitoring, production control, etc. - Flexible part slide - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - German language - Single ownership – origin: Germany - Continuous maintenance by manufacturer and previous owner Injection unit: Screw diameter: 40 mm Shot weight: 172 g/PS Ksdpfx Aswg Tt Rjh Dsnc Injection pressure: 1,530 bar Injection volume: 188 cm³ Clamping unit: Clamping force: 70 t / 700 kN Tie bar distance: 370 x 370 mm Mounting platen size: 510 x 510 mm Mould installation height: 200 mm Max. platen distance: 600 mm Ejector stroke/force: 125 mm / 30 kN Clamping unit: hydraulic Drive power: 15 kW Heating output: 7.7 kW – 5 zones Total power: 23 kW Warranty: Warranty until initial commissioning. Loading/Shipping: Free loading onto buyer's truck or delivery free domicile for reimbursement of freight charges Available from our warehouse in Hanover, Germany Further pictures to follow. Information about the machines we offer and our company: - We only sell machines purchased for our own portfolio from ongoing production, available from our warehouse in Hanover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers or trade in third-party property - All machines offered come from successful companies for whom maintenance and care are a matter of course - All offered machines are available for viewing at our warehouse

Stanje: dober (rabljeno), Leto izdelave: 2012, obratovalne ure: 43.331 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, premer vijaka: 45 mm, razmak između stupova: 630 mm, delovna prostornina: 318 cm³, tlak vbrizgavanja: 2.470 letvica, Lager-Nr.: 503604 Hersteller: ARBURG Typ: Allrounder 630 S 2500-800 Steuerung: Selogica Baujahr: 2012 Betriebsstunden: 43331 h Schließkraft: 2500 kN Holmaß h x v: 630 x 630 mm Plattengröße h x v: 900 x 900 mm Einbauhöhe min.: 300 mm Einbauhöhe max.: 700 mm Knodpfx Ahjxfq Rne Dec Plattenabstand max.: 1300 mm Öffnungsweg: 600 mm Schneckendurchmesser: 45 mm Hubvolumen: 318 ccm Spritzdruck: 2470 bar Ausrüstung Bildschirmtext deutsch Kernzug hydraulisch 2x Maschine inklusive Förderband Maschine inklusive Handling Maschine inklusive Schutzeinhausung Nivellierelemente Technische Daten Handling Maschinenart : Linearroboter Fabrikat: Arburg Steuerung: Multilift Baujahr: 2012 X-Achse: 400 mm Z-Achse: 1400 mm Rotation Achse C: 90 ° Gesamtgewicht: 450 kg Maschinenabmessungen SGM LxBxH: 6.12m x 2.25m x 2.21m Gesamtgewicht: 12200 KG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Arburg 570A 2000-1300 Alldrive (2014) Electric Knedpfxsvydypj Ah Dsc Clamping force: 200 t Screw diameter: 60 mm Shot weight: 620 g Tie bar spacing (vertical): 570 mm Tie bar spacing (horizontal): 570 mm Shot volume: 678 cm³ Type: Horizontal Drive: Electric

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194573, vpenjalna sila: 1.000 kN, Here we offer a well-maintained injection moulding machine. We are also happy to accept well-maintained machines from year of manufacture 2005 onwards as part exchange. Please offer us your surplus machines. Current notice – Tax advice and benefit for second-hand machinery From 01.07.2025, used machines can also be depreciated for tax purposes with a special allowance of 30% annually. In addition to the lower purchase price compared to new equipment, you can claim the same depreciation amounts as you would for a new machine. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Arburg 2-component injection moulding machine with complete service history Machine equipped with horizontal and vertical injection units Machine No.: 194573 Arburg 420C 1000-150/150 Year of manufacture: 2004 Controller: Selogica Features: Kodpshyumgofx Ah Djnc - 2 x core pull (simultaneous movement, hold pressure adjustable) - Intermediate stop for hydraulic rotary control - CF card drive - Interface for master computer - Interface for dosing device - Interface for conveyor belt - Machine prepared for Multilift - Selector unit with connection - Installation height extended to 350 mm - Highly wear-resistant screws - Connection for air blast unit - 2-colour/horizontal & vertical unit - incl. disks/CF cards – complete documentation/manuals Clamping force: 100 tons / 1,000 kN Tie-bar spacing: 420 x 420 mm Mould platens: 570 x 570 mm Opening stroke: 500 mm Max. daylight between plates: 850 mm Mould height: 350 mm Injection Unit 1 (150) Screw diameter: 30 mm (high wear-resistant) Shot weight: 65 g Shot volume: 78 cm³ Injection pressure: 2,210 bar Injection Unit 2 (150) Screw diameter: 25 mm (high wear-resistant) Shot weight: 45 g Shot volume: 54 cm³ Injection pressure: 2,500 bar Dimensions/Weight Dimensions: 4.63 x 1.3 x 3.9 m (L x W x H) Weight: 4,000 kg Connected load: 125 A mains fuse Delivery franco domicile address up to buyer’s premises – purchaser unloads at their own risk and responsibility from truck loading platform. The machine is offered function tested. About the machines and company we represent - We only sell our own machines purchased from running production from our warehouse in Hannover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency equipment – we are NOT brokers dealing in third-party property - All offered machines come from successful companies for whom maintenance and care are standard - All machines offered can be inspected at our warehouse

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 64.218 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 520 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2.000 letvica, Zaloga št.: 503128 Proizvajalec: ARBURG Tip: Allrounder 520 C 2000-800 Krmiljenje: Selogica Leto izdelave: 2005 Obratovalne ure: 64218 h Kjdpfx Ajxfq Igeh Djnc Zapiralna sila: 2000 kN Razmak vodilnic (v x h): 520 x 520 mm Velikost plošče (v x h): 728 x 728 mm Minimalna vgradna višina: 250 mm Maksimalna razdalja plošč: 900 mm Odpiralna pot: 650 mm Premer polža: 50 mm Prostornina hoda: 392 ccm Tlačni tlak: 2000 bar Oprema Prikaz v nemščini CEE-vtičnica 16A Hidravlični jedroizvlek 1x Pnevmatski jedroizvlek 1x Zračni ventil 1x Stroj z vodnim akumulatorjem Stroj brez dozirnega lijaka Nivlirni elementi Vmesnik EUROMAP 12 Vmesnik za ravnanje Schuko vtičnica 10A Ogrevanje orodja 12x Mere stroja D x Š x V: 5,45 m x 1,95 m x 2,1 m Skupna teža: 7300 kg

Stanje: dober (rabljeno), Leto izdelave: 2008, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke: 350 mm Mold height: 200 mm Tie bar distance (vertical): 320 mm Tie bar distance (horizontal): 320 mm Mold mounting plates: 446x446 mm Injection pressure: 2240 bar Injection flow rate: 124 cm³ Ejector stroke: 125 mm Ejector force: 30 kN Net weight: 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader Machine tested Knedpfxju Rq Aie Ah Djc English language Type: Horizontal Drive: Hydraulic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 20.092 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 190332, Oprema: dokumentacija / priročnik, From 01.07.2025, used machines will also be eligible for a special depreciation of 30% per year for tax purposes. Injection Moulding Machine, 3-color or 2-color (the third unit can be deactivated) (horizontal/vertical, and third unit in L-position with safety enclosure) ##### Can also be converted to 2-color operation ##### Immediately available from our warehouse in Hanover Manufacturer: Arburg Type: 420C 1000-150/150/60 Year of manufacture: 2003 Kedpfx Ajgrzh Eeh Djnc Machine number: 190332 Controller: Selogica Operating hours: only 20,092 h +++++ Clamping Unit +++++ Control Selogica Clamping force 1000 kN / 100 t Tie bar distance 420 x 420 mm Mounting platens 795 x 795 mm Mould installation height 300 mm Max platen distance 950 mm Ejector stroke / force 225 mm / 66 kN Clamping unit: hydraulic ++++ Injection Unit 1 (150 unit) ++++ Screw diameter: 15 mm (high wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2750 bar ++++ Injection Unit 2 (150 unit) ++++ Screw diameter: 15 mm (high wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2750 bar ++++ Injection Unit 3 (60 unit) ++++ Screw diameter: 15 mm (high wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2080 bar Extras 1 ALLROUNDER 420 C 1000-150/150/60 1 vertical injection unit mounted on supports for the second injection unit instead of the clamping bars, manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pullers 1 open nozzle, 15 mm wear resistant, without heating band (1st injection unit 150) VE-902/00 1 Technology Level 2 - servo-controlled hydraulic system with two control pumps for regulated machine movements, with travel-dependent, controlled target ramps. The build-up of mould clamping force is programmable and controlled. The clamping force is servo-controlled via the second pump. The build-up of nozzle contact force is programmable. The contact force is manually adjustable, value is controlled and held. 1 Technology Level 3 hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. In 2-component machines, also for the second injection unit (requires Technology Level 2, VE-132/03) VE-130/40 1 heating band for open nozzle VE-320/00 1 injection unit 150 for vertical injection into the mould parting line during 2-component processing VE-136/02 1 position-controlled screw with control valve on the injection unit, including controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into the mould parting line as third injection unit for multi-component applications (L-position) VE-906/00 1 to VE-906/00, injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting plane full protection VE-907/00 1 plasticizing cylinder set 15 mm (without nozzle), with front-mounted feed and pressure relief valve, highly wear-resistant design with sintered metal check valve (L-position) VE-908/00 1 open nozzle 15 mm wear resistant, without heating band (L-position) VE-909/00 1 nozzle tip with radius 15 (L-position) VE-910/00 1 heating band for open nozzle (L-position) VE-911/00 1 position-controlled screw for the third injection unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 199107, Here we offer the following well-maintained pre-owned injection moulding machine as part of our injection moulding machinery trading business. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax information and advantage for used machines: From 01/07/2025, used machines can also be claimed for tax purposes with a special depreciation of 30% per year. In addition to the more favourable price compared to a new machine, you may apply the same depreciation rates as for new equipment. Keyword: "Growth Booster" (§ 7 Paragraph 2 EStG-E) Manufacturer: Arburg Model: 720S 3200-2100 Control system: Selogica Year of manufacture: 2005 Machine serial number: 199107 Knjdpolc R Rxofx Ah Doc Special features/condition: - Pump replaced - New hydraulic motor in 2019 - Injection unit sealed Regular maintenance by manufacturer and previous owner Extras: - 2 x core pull - Robot interface - Machine data sheet available on request - Complete documentation and software included - German language - From first ownership – origin: Germany Clamping unit: Clamping force: 3200 kN / 320 t Tie-bar distance: 720 x 720 mm Platen size (H): 1040 mm x 1040 mm Min. installation height: 300 mm Max. installation height: 700 mm Max. platen distance: 1400 mm Opening stroke: 700 mm Ejector stroke: 250 mm Ejector force: 100 kN Movable platen centring (D): 165 mm Fixed platen centring (D): 165 mm Mould weight: 3600 kg Injection unit: Screw diameter: 70 mm Shot weight in polystyrene: 984 g (PS) Available immediately either ex works from our Hanover/Germany warehouse or delivered to your site (plus freight costs). The machine is supplied function-tested. The machine is our sole property. The requested machine is immediately available from our Hanover warehouse, comes function-tested, and can be demonstrated under power. Information about the machines we offer and our company: - We sell only our own machines, sourced from continuous production, from our Hanover warehouse - All listed machines are checked and tested before removal - We DO NOT sell insolvency assets – we are NOT brokers trading third-party property - All machines offered come from successful businesses for whom regular maintenance and care are a given - All offered machines can be inspected at our warehouse