Arburg 420 C 1000-150/60

Arburg 420 C 1000-150/60

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 21.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 190332, Oprema: dokumentacija / priročnik, From 01.07.2025, used machines can also be claimed for tax purposes with a special depreciation of 30% per year. Injection Moulding Machine 3-color or 2-color (the 3rd unit can be deactivated) Ljdpfogrzh Ejx Aaijhl (horizontal/vertical/3rd unit in L-position with safety enclosure) ##### Can also be converted to 2-color operation ##### Immediately available from our warehouse in Hanover Make: Arburg Model: 420C 1000-150/150/60 Year of manufacture: 2003 Machine number: 190332 Control: Selogica Operating hours: only 21,200 h +++++Clamping Unit+++++ Control Selogica Clamping Force 1000 kN / 100 t Tie Bar Distance 420 x 420 mm Mounting Plates 795 x 795 mm Mold Installation Height 300 mm Max. Plate Distance 950 mm Ejector Stroke/Force 225 mm / 66 kN Clamping Unit: hydraulic ++++ Injection Unit 1 (150 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2750 bar ++++ Injection Unit 2 (150 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2750 bar ++++ Injection Unit 3 (60 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2080 bar Extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 1 vertical injection unit mounted on carriers for the 2nd injection unit (instead of on the clamping bars), manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pull 1 open nozzle 15 mm, wear-resistant, without heating band (1st injection unit 150) VE-902/00 1 Technology Level 2 – servo-controlled hydraulic system with two variable pumps for controlled machine movements, with stroke-dependent controlled target ramps. The buildup of clamping force is programmable and controlled. The clamping force is held servo-controlled via the second pump. The buildup of nozzle force is programmable. The nozzle force can be set manually; the value is electronically regulated. 1 Technology Level 3 hydraulic system with 3 variable pumps for simultaneous movements of the main axes and faster movements of the auxiliary axes. For 2-component machines, as a hydraulic unit for the 2nd injection unit (Technology Level 2 required, VE 132/03) VE-130/40 1 heating band for open nozzle VE-320/00 1 injection unit 150 for vertical injection into the mold parting line for 2-component processing VE-136/02 1 position-controlled screw with control valve on the injection unit, incl. controlled back pressure, nozzle force adjustable manually VE-561/20 1 position-controlled screw with control valve for multi-component machines—for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00: Injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting plane full safety guard VE-907/00 1 plasticizing cylinder kit 15 mm (without nozzle), with forward feed and pressure reducing valve, high-wear-resistant design with sintered metal non-return valve (L-position) VE-908/00 1 open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00 1 nozzle tip with radius 15 (L-position) VE-910/00 1 heating band for open nozzle (L-position) VE-911/00 1 position-controlled screw for the third injection unit

Stanje: zelo dobro (rabljeno), Drilling depth: 500 mm Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors excepted, the following from our stock, without obligation: DEGEN Universal Deep Hole Drilling Machine Model: UTB 500-2 Year of manufacture: - _____ Drilling depth: 650 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 25 mm Spindle taper: SK40 Infinitely variable feed: 0–120 mm Rapid traverse: rpm Lodpfx Aasxx A D Toijhl Drilling unit vertically adjustable: 250 mm Table dimensions: 570 x 1000 mm 4 T-slots, 14 mm T-slot spacing: 90 mm Table load capacity: 1000 kg Transverse table travel: 460 mm Table swivels: 360° Weight approx.: 1,600 kg Accessories / Special Equipment: • Compact design on a robust base • Deep hole drilling up to 500 mm length possible—ideal for extended drilling in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • Features an RSF Elektronik digital display, type Z 502, for X and Y axes, with 0.01 mm resolution • A solid solution for workshops requiring deep, straight bore holes—not intended for very large diameters or complex machining tasks • The Degen UTB 500 has been extensively modernised—with Lenze feed drive, overhauled Y-axis, new glass scale encoder, newly mounted spindle, and new gas pressure spring—offering reliable precision and high performance Condition: good to very good – ready for demonstration under power A video of the machine is available here (please click on the link): UTB 500/4 Delivery: ex stock—as inspected Payment: strictly net—on receipt of invoice We look forward to your order. We also have further tool grinding machines in stock—please enquire!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 21.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 190332, vpenjalna sila: 1.000 kN, injekcijska masa: 15 g, izmetalna sila: 66.000 N, hod izmetalca: 225 mm, dolžina plošče: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL SPECIFICATIONS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platen size: 795 x 795 mm Mold installation height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection unit 3 (60 series) Screw diameter: 15 mm (high wear-resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h EQUIPMENT - 1 vertical injection unit mounted on carriers for the 2nd injection unit (instead of on tie bars), manually operated, working position adjustable between 70 and 250 mm - 2 x core pullers - Open nozzle 15 mm, wear-resistant, without heating band (1st IU 150) - Technology Level 2 – servo-controlled hydraulic system with two regulated pumps - Technology Level 3 hydraulic system with three regulated pumps for simultaneous movements - Heating band for open nozzle - 150 injection unit for vertical injection into the mold separation during 2K processing - Position-regulated screw with control valve at the injection unit, incl. regulated back pressure - Position-regulated screw with control valve for multi-component machines – for injection unit 2 - 60 injection unit for horizontal injection into the mold separation as the 3rd injection unit - For VE 906/00, 60 injection unit in L-position: unit lowered by 70 mm - Plasticizing cylinder set 15 mm (without nozzle), with pre-positioned feed and pressure relief valve Lhjdpfx Aey Hki Asaisl - Open nozzle 15 mm, wear-resistant, without heating band (L-position) - Nozzle tip with radius 15 (L-position) - Heating band for open nozzle (L-position) - Position-regulated screw for the third injection unit - Documentation / Manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, vpenjalna sila: 1.000 kN, Arburg 420C-1000-60-150 (123) 2-component with robot and safety cage Year of manufacture: 2004 TECHNICAL DATA Screw diameter [mm]: 18/30 Shot weight [g]: 17/65 Injection pressure [bar]: 2500/2210 Clamping force [kN]: 1000 Tie bar distance [mm]: 420x420 Platen dimensions [mm]: 570x570 Minimum mould height [mm]: 250 CONTROLS Control system: Selogica Monitor: Yes Control cabinet: Yes Language: German Ljdpovt Rwujfx Aaishl OTHER Power [kW]: 34.5 Operating hours [h]: 61,792 Dimensions [m]: 4.6 x 1.8 Weight [kg]: 4000 CR – Core pull R – Handling or robot ZP – Air valve Without hopper

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Pressure: 85.0 t Bending length: 2050 mm Distance between uprights: 1750 mm Throat depth: 410 mm Stroke: 365 mm Installation height: 535 mm Approach speed: 200 mm/sec Working speed: 1.0 - 10.0 mm/sec Return speed: 135 mm/sec Back gauge – adjustable, max.: 600 mm Table width: 120 mm Working height: 1050 mm Operating hours: 28,500 h Oil capacity: 200 l Operating pressure: 340 bar Total power requirement: 14.0 kVA Machine weight approx.: 9,050 kg Dimensions (L x W x H): 2680 x 2100 x 2885 mm Lhjdpfx Aaexaa Ureisl - With increased installation height / piston stroke - In very well-maintained condition (!!) - Only approx. 28,500 operating hours - In inspected condition – with machine video – ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - Including DELEM CNC controller * Swiveling control panel at the front left - CNC-controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back gauge (X axis) - CNC electro-motorized height adjustment of the back gauge (R axis) - CNC electro-motorized adjustment of the gauge fingers (Z axes) - CNC pneumatic die shift (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic lower tool clamping - 1x movable two-hand / foot control - 2x front, robust support arms incl. “Sliding System” - Side guarding (swiveling doors) - Rear guarding (swiveling doors) - Press brake tool storage cabinet (front right, side) - Original operating manual + circuit diagram etc. Further technical data: - Approach speed X axis: 500 mm/sec - Approach speed R axis: 300 mm/sec - Approach speed Z axis: 1,000 mm/sec - Travel range X axis: max. 600 mm - Travel range R axis: max. 250 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Lhodpfjp Audqjx Aaiel Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Leto izdelave: 2003, stanje: dober (rabljeno), For sale is a 2-component injection molding machine from Arburg, model 420 C. The machine comes from a facility with a strong focus on maintenance and cleanliness. All maintenance and repair work is performed promptly by qualified personnel. - Arburg 420C 1000-150/60 - Clamping force: 1000 kN - Year of manufacture: 04/2003 - Screw diameter: 2x Ø25mm installed - 9x mold heating circuits - 2x hydraulic core pulls - 1x pneumatic needle shut-off - 9x temperature sensors - 1x mold cavity pressure sensor - Current operating hours: approx. 36,684 Additionally available: 1x spare cylinder Ø18mm for secondary injection unit Lsdpfxelwxpio Aaijhl Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your equipment? For more information or contact options, please visit our website.

Stanje: skoraj kot novo (rabljeno), Rotary vane vacuum pump in oil bath. Available in stock. Pump fully overhauled. Comes with warranty. Nominal flow rate: 300 m³/h Ljdpfx Aaeftzzgoiehl Ultimate vacuum: 0.1 mbar abs. For any questions, please contact us.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 184686, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, razmak između stupova: 420 mm, delovna prostornina: 54 cm³, injekcijska masa: 45 g, For sale is an injection moulding machine from Arburg, model 420 C 1000-150/60. The machine is in excellent and fully functional condition, very well maintained. The machine is offered without peripherals. Rotary table, material feed, temperature control units, and other accessories are not included. Technical specifications: - Year of manufacture: 2001 - Clamping force: - Clear tie bar spacing: 420 x 420 mm - Opening stroke: 500 mm - Minimum mould installation height: 250 mm - Platen size: 570 x 570 mm - Ejector stroke: 175 mm - Screw diameter: 25 mm - Theoretical shot volume: 54 cm³ - Shot weight: 45 g/PS Upon request, we can organise transport and loading throughout Europe at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? Ljdpfx Aasx E U Eloiehl For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 184686, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, razmak između stupova: 420 mm, delovna prostornina: 54 cm³, injekcijska masa: 45 g, odmični hod: 500 mm, Naprodaj je brizgalni stroj znamke Arburg, tip 420 C 1000-150/60. Stroj je tehnično brezhiben in zelo dobro vzdrževan. Tehnični podatki: Leto izdelave: 2001 Sila zapiranja: 1000 kN Ledpsx Itamefx Aaijhl Razdalja med stebri: 420 x 420 mm Odpiralna pot: 500 mm Višina za vgradnjo orodja: 250 mm Pritrdilna plošča orodja: 570 x 570 mm Pot izmetalca: 175 mm Premer polža: 25 mm Izračunana prostornina hoda: 54 cm³ Teža izstrelka: 45 g/PS Stroj se prodaja brez periferne opreme. Rotacijska miza, transport granulata, termoregulatorji in ostala oprema niso vključeni.

Stanje: dober (rabljeno), Leto izdelave: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Year of manufacture: 2001 2-axis CNC lathe with robotic loading Description: 2-axis (X-Z) lathe for short workpieces, equipped with a robotic workpiece magazine X-axis travel: 180 mm Z-axis travel: 325 mm Spindle speed: 4500 rpm Lhjdpjk Hz Iwofx Aaijl Coolant system and chip conveyor