Stroj za brizganje

Arburg 420 C 1000- 150/60

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 21.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 190332, Oprema: dokumentacija / priročnik, From 01.07.2025, used machines can also be claimed for tax purposes with a special depreciation of 30% per year. Injection Moulding Machine 3-color or 2-color (the 3rd unit can be deactivated) (horizontal/vertical/3rd unit in L-position with safety enclosure) ##### Can also be converted to 2-color operation ##### Immediately available from our warehouse in Hanover Make: Arburg Model: 420C 1000-150/150/60 Year of manufacture: 2003 Machine number: 190332 Control: Selogica Operating hours: only 21,200 h Hnodpegrzh Eefx Adkoi +++++Clamping Unit+++++ Control Selogica Clamping Force 1000 kN / 100 t Tie Bar Distance 420 x 420 mm Mounting Plates 795 x 795 mm Mold Installation Height 300 mm Max. Plate Distance 950 mm Ejector Stroke/Force 225 mm / 66 kN Clamping Unit: hydraulic ++++ Injection Unit 1 (150 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2750 bar ++++ Injection Unit 2 (150 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2750 bar ++++ Injection Unit 3 (60 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2080 bar Extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 1 vertical injection unit mounted on carriers for the 2nd injection unit (instead of on the clamping bars), manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pull 1 open nozzle 15 mm, wear-resistant, without heating band (1st injection unit 150) VE-902/00 1 Technology Level 2 – servo-controlled hydraulic system with two variable pumps for controlled machine movements, with stroke-dependent controlled target ramps. The buildup of clamping force is programmable and controlled. The clamping force is held servo-controlled via the second pump. The buildup of nozzle force is programmable. The nozzle force can be set manually; the value is electronically regulated. 1 Technology Level 3 hydraulic system with 3 variable pumps for simultaneous movements of the main axes and faster movements of the auxiliary axes. For 2-component machines, as a hydraulic unit for the 2nd injection unit (Technology Level 2 required, VE 132/03) VE-130/40 1 heating band for open nozzle VE-320/00 1 injection unit 150 for vertical injection into the mold parting line for 2-component processing VE-136/02 1 position-controlled screw with control valve on the injection unit, incl. controlled back pressure, nozzle force adjustable manually VE-561/20 1 position-controlled screw with control valve for multi-component machines—for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00: Injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting plane full safety guard VE-907/00 1 plasticizing cylinder kit 15 mm (without nozzle), with forward feed and pressure reducing valve, high-wear-resistant design with sintered metal non-return valve (L-position) VE-908/00 1 open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00 1 nozzle tip with radius 15 (L-position) VE-910/00 1 heating band for open nozzle (L-position) VE-911/00 1 position-controlled screw for the third injection unit

Stanje: rabljeno, Leto izdelave: 1989, obratovalne ure: 74.900 h, vpenjalna sila: 850 kN, premer vijaka: 40 mm, skupna masa: 3.700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Central computer, handling equipment, blow-off, diverter gate, core pull 1 hydraulic, mould temperature control 3 units. The machine comes with the following accessories, etc.: Hsdpfx Adjr Hrqrjksni Complete 50-series thermoplast injection unit, selector valve, hydraulic infeed conveyor (height-adjustable, 3 levels) (integrated in control), external floppy disk drive (original Arburg), documentation and machine service reports from Arburg Service, machine setting CMD training materials (folder), electrical diagram, documents also available in digital form, oil filling (must be pumped into a container prior to transport; pump is available), electronic water manifold.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 184686, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, razmak između stupova: 420 mm, delovna prostornina: 54 cm³, injekcijska masa: 45 g, odmični hod: 500 mm, Naprodaj je brizgalni stroj znamke Arburg, tip 420 C 1000-150/60. Stroj je tehnično brezhiben in zelo dobro vzdrževan. Hsdpfx Aox Itamjdkeni Tehnični podatki: Leto izdelave: 2001 Sila zapiranja: 1000 kN Razdalja med stebri: 420 x 420 mm Odpiralna pot: 500 mm Višina za vgradnjo orodja: 250 mm Pritrdilna plošča orodja: 570 x 570 mm Pot izmetalca: 175 mm Premer polža: 25 mm Izračunana prostornina hoda: 54 cm³ Teža izstrelka: 45 g/PS Stroj se prodaja brez periferne opreme. Rotacijska miza, transport granulata, termoregulatorji in ostala oprema niso vključeni.

Leto izdelave: 2003, stanje: dober (rabljeno), For sale is a 2-component injection molding machine from Arburg, model 420 C. Hsdpfx Aolwxpiedksni The machine comes from a facility with a strong focus on maintenance and cleanliness. All maintenance and repair work is performed promptly by qualified personnel. - Arburg 420C 1000-150/60 - Clamping force: 1000 kN - Year of manufacture: 04/2003 - Screw diameter: 2x Ø25mm installed - 9x mold heating circuits - 2x hydraulic core pulls - 1x pneumatic needle shut-off - 9x temperature sensors - 1x mold cavity pressure sensor - Current operating hours: approx. 36,684 Additionally available: 1x spare cylinder Ø18mm for secondary injection unit Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your equipment? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750) Hnederthkuopfx Adksi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, vpenjalna sila: 1.000 kN, Arburg 420C-1000-60-150 (123) 2-component with robot and safety cage Year of manufacture: 2004 TECHNICAL DATA Screw diameter [mm]: 18/30 Shot weight [g]: 17/65 Injection pressure [bar]: 2500/2210 Clamping force [kN]: 1000 Tie bar distance [mm]: 420x420 Platen dimensions [mm]: 570x570 Minimum mould height [mm]: 250 CONTROLS Control system: Selogica Monitor: Yes Control cabinet: Yes Language: German OTHER Power [kW]: 34.5 Operating hours [h]: 61,792 Dimensions [m]: 4.6 x 1.8 Weight [kg]: 4000 Hnodpfx Adjvt Rwujkoi CR – Core pull R – Handling or robot ZP – Air valve Without hopper

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm Hnjdep Audqepfx Adkoi MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Arburg 270 M-350-90 U Schließkraft: 35 t Baujahr: 1997 Schneckendurchmesser: 25 mm Holmenabstand: 270 x 270 mm Hjdpjg S I S Aofx Adkoni

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 144.381 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Technical data: Year of manufacture: 2000 Hodpfeu Uuakex Adkeni Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Transport and loading can be organised Europe-wide for an additional fee if required. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 80/45 Tech Schließkraft: 45 Tonnen, holmlos Schnecke: 22 mm Baujahr: 2004 Betriebsstunden: 200 Hnsdpfeh Rawbsx Adkei