Abflammen Naprava nakup rabljenega (6.861)

Stanje: rabljeno, High-current EMC filter SCHAFFNER Type FS 20364-1200-99 Ffodpfed D Dh Asx Abvow 3-phase, 3 x AC pre-charger, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz Rated current: 3 x 1200 A Dimensions (W x H x D): 135 x 260 x 235 mm Weight: 27.5 kg Very good condition, from warehouse clearance, unused 2 units available, price per unit

Stanje: rabljeno, TIG welding machine, electric welding unit DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture: approx. 1975 Output: 225 amps = 60% duty cycle Fjdpsdzqacsfx Abvsfw 125 amps = 100% duty cycle Adjustment range: 2.8 to 225 amps Current type: Direct and alternating current (AC-DC) Power supply: 380 V, 50 Hz - Power setting via 5 coarse steps and stepless fine setting via rotary potentiometer - 2-stroke and 4-stroke welding modes - Remote control with rotary potentiometer for fine adjustment - Digital amperage display - TIG torch package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Stanje: rabljeno, Straightening machine, strip straightening device with adjustable geared motor LENZE This straightening machine/strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a conventional straightening machine Type: 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, infinitely adjustable Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Fodpjdzp U Ajfx Abvsfw Power supply: 380 Volt, 50 Hz - Pair of pull rollers, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper section of straightening rollers is mechanically adjustable - Straightening unit with 3 rollers, one roller is missing (rollers in the straightening unit are not driven) - Mounted on a stable metal frame - The straightening machine was used for cardboard approx. 350 x 1.5 mm Required space (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Stanje: rabljeno, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic chuck: 115 x 115 mm Clamping range: 110 x 75 mm Construction height of magnetic plate: 119 mm Workpiece dimensions (L x W x H): max. 60 x 100 x 50 mm Power consumption: 1 ampere Operating voltage: 24 volts, DC (V/DC) - Mechanically switchable permanent magnet Dimensions (L x W x H): 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable for use in cutting tool and die making for tapered, back-ground cutting plates or mold inserts. Ffsdpfxedz Sqxo Abvew

Stanje: rabljeno, Test bench, test station, measurement station, test device, measuring device, tester for HV, PE, IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage tester The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other terminal is earth-referenced and can be set to a potential up to 300 V max. Serial no.: Year of manufacture: 2005 Supply voltage: 230 VAC Ffedpfjd Dc Unjx Abvjw Mains frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices under stock numbers 57820 and 57821

Stanje: novo, Leto izdelave: 2024, CNC Plasma Cutting System PCO-2010-D The machine was developed and manufactured in Poland. Technical Specifications - X and Y working area: 1020 x 2100 mm - Clearance between table surface and beam: 240 mm - Maximum profile height to be cut: 200 mm - Rapid traverse speed (cutting speed depends on the plasma source power and the thickness of the material being cut): 25,000 mm/min - Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200 Construction Parameters: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total weight: 800.0 kg - Maximum load capacity: 800.0 kg - Adjustable support feet: 4 Systems THC – Torch Height Controller – integrated cutting height control system automatically adjusts the torch distance to the material based on analysis of changes in source voltage. AMS – Align Material System – automatically corrects material angle information relative to the table. Visit and test our machines Take part in an exclusive demonstration where a qualified Otinus technician will showcase the full functionality of the machine. Additionally, you can try out how the unit suits your requirements. You are welcome to provide technical drawings and materials for sample processing. Otinus Academy Learning Software (optional) This is a constantly expanding e-learning platform designed specifically for Otinus brand customers. By purchasing this unit, you receive one year of access to online courses, enabling you to train a new employee with ease or refresh your knowledge from previous training sessions! On-site commissioning and operator training at the customer's premises (optional) - Day 1 (up to 8 hours) – machine installation and training in the use of the control system. Ffedpfx Ash E Iytobvsw Telephone support by a specialist (optional) - By phone: from 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour package to be used within 12 months. - Online: from 7:30 am to 2:30 pm (Mon-Fri) – an 8-hour package to be used within 12 months. Access to Otinus Academy online courses (optional) - MyPlasm – access for 12 months - LibreCad – access for 12 months

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. CNC Plasma Cutting System PCO-3020-D The machine was designed and manufactured in Poland. Technical Specifications - X and Y working area: 2020 x 3100 mm - Clearance between table surface and beam: 240 mm - Maximum profile cutting height: 200 mm - Rapid traverse speed (Cutting speed depends on the plasma source output and the thickness of the material to be cut.): 25,000 mm/min Ffjdpfxsrp Dcro Abvow - Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200 Construction Parameters: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total weight: 1450.0 kg - Maximum load capacity: 2000.0 kg - Adjustable support legs: 6 Systems THC – Torch Height Controller – integrated torch height control system automatically adjusts the torch-to-material distance based on the evaluation of source voltage fluctuations. AMS – Align Material System – automatically corrects sheet alignment information relative to the table. Come and test our machines Take part in an exclusive demonstration, where a qualified Otinus technician will walk you through the full functionality of the machine. You can also try out how the device fits your needs. Feel free to bring technical drawings and sample materials. Otinus Academy Learning Software (optional) This is a continuously expanding e-learning platform created for Otinus customers. When purchasing this device, you receive one year of access to online courses, enabling you to easily onboard new staff or refresh previously acquired knowledge! On-site Commissioning and Operator Training (optional) - Day 1 (up to 8 hours) – Machine installation and training on the control system. Expert Telephone Consultation (optional) - By phone: 7:30 AM – 9:00 PM (Mon-Sat) – 8-hour package, to be used within 12 months. - Online: 7:30 AM – 2:30 PM (Mon-Fri) – 8-hour package, to be used within 12 months. Access to Otinus Academy online courses (optional) - MyPlasm – 12-month access - LibreCad – 12-month access

Stanje: novo, Leto izdelave: 2024, CNC Plasma/Flame Cutting System PCO-3020-DG The machine was designed and built in Poland. Technical Specifications - X and Y working area: 2020 x 3100 mm - Clearance between table surface and gantry: 240 mm - Maximum height of the profile to be cut: 200 mm - Rapid traverse speed (cutting speed depends on plasma source power and material thickness): 25,000 mm/min - Compatible with Hypertherm Powermax 45–125 plasma sources and Hypertherm MAXPRO200 Construction Data: - Length: 3,650 mm Fodpoh E Izbefx Abvsfw - Width: 2,780 mm - Height: 1,500 mm - Total weight: 1,550.0 kg - Maximum load capacity: 2,800.0 kg - Adjustable support legs: 6 Systems GCS – Gas Cutting System – Integrated oxy-fuel cutting system enabling plate cutting up to 150 mm thick THC – Torch Height Controller – Integrated torch height control system automatically adjusts torch distance to the material, based on analysis of arc voltage fluctuations AMS – Align Material System – Automatically corrects material angle information relative to the table Visit and test our machines Attend an exclusive demonstration led by a qualified Otinus technician, who will showcase the full functionality of the machine. Additionally, you can test the device’s suitability for your tasks. Technical drawings and sample material can be provided. Otinus Academy Learning Software (optional) This is a continuously developing e-learning platform created for Otinus customers. With purchase of this device, you receive one year of access to online courses, enabling you to easily onboard new staff or refresh training knowledge! On-site Commissioning and Operator Training (optional) - Day 1 (up to 8 hours): Machine installation and training on control system operations. Telephone Support by a Specialist (optional) - Phone: 07:30–21:00 (Mon–Sat) – an 8-hour package to be used within 12 months - Online: 07:30–14:30 (Mon–Fri) – an 8-hour package to be used within 12 months Access to Otinus Academy Online Courses (optional) - MyPlasm – Access for 12 months - LibreCad – Access for 12 months

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! The offer pertains to the basic version of the machine. All optional equipment and their prices can be found on our website. CNC Plasma-Oxyfuel Cutting Machine PCV-3015-DG The machine was designed and manufactured in Poland. Technical specifications: - X and Y working area: 1520 x 3100 mm - Clearance between table surface and gantry: 240 mm - Maximum height of profile to be cut: 200 mm - Rapid traverse speed (Cutting speed depends on the power of the plasma source and the thickness of the material to be cut.): 25,000 mm/min - Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200 Construction parameters: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total weight: 1,200.0 kg - Maximum load capacity: 2,500.0 kg - Adjustable support feet: 6 Systems: GCS - Gas Cutting System – integrated oxy-fuel cutting system allowing for cutting of sheets up to 150 mm thick. THC - Torch Height Controller – integrated height control system that automatically adjusts the torch distance to the material based on the analysis of source voltage fluctuations. Ffodpforp Dmbex Abvjw AMS - Align Material System – automatically corrects material angle information relative to the table. Come and test our machines Take part in an exclusive demonstration where a qualified Otinus technician will showcase the full functionality of the machine. In addition, you can test how the unit meets your needs. You are welcome to provide technical drawings and material samples. Otinus Academy learning software (optional) This is a continually expanding e-learning platform created for Otinus customers. With the purchase of this unit, you will receive one year’s access to online courses, enabling you to easily onboard new employees or refresh training knowledge! On-site commissioning and operator training (optional) - Day 1 (up to 8 hours) – installation of the machine and training on using the control system. Technical support by a specialist (optional) - By phone: 7:30 AM to 9:00 PM (Mon-Sat) – an 8-hour package to be used within 12 months. - Online: 7:30 AM to 2:30 PM (Mon-Fri) – an 8-hour package to be used within 12 months. Access to Otinus Academy online courses (optional) - MyPlasm – access for 12 months - LibreCad – access for 12 months

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the machine’s basic version. All additional equipment and their prices can be found on our website. CNC Plasma/Flame Cutting System PCO-2512-DG The machine was developed and manufactured in Poland. Technical specifications: - X and Y working area: 1270 x 2600 mm - Clearance between table surface and crossbeam: 240 mm - Maximum height of workpiece to be cut: 200 mm - Rapid traverse speed (Cutting speed depends on plasma source power and material thickness): 25,000 mm/min - Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200 Construction data: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total weight: 1050.0 kg - Maximum load capacity: 1750.0 kg - Adjustable support feet: 6 Systems: GCS - Gas Cutting System – integrated oxy-fuel cutting system, enables cutting of plates up to 150 mm thick. THC - Torch Height Controller – integrated torch height control system; automatically adjusts the torch-to-material distance based on analysis of voltage fluctuations. AMS - Align Material System – automatically corrects the information about the material’s angle in relation to the table. Visit us and test our machines Take part in a unique demonstration led by a qualified Otinus technician, who will showcase the full functionality of the machine. You can also try out how the equipment suits your requirements. You may bring technical drawings and sample materials. Otinus Academy Learning Software (optional) This ever-expanding e-learning platform is designed for Otinus brand customers. When purchasing this machine, you receive one year’s access to online courses that make it easy to onboard new employees or refresh training knowledge! Commissioning and operator training at the customer’s site (optional) - Day 1 (up to 8 hours) – Machine installation and training in the use of the control system. Telephone consultation by a specialist (optional) - By phone: 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour package to be used within 12 months. - Online: 7:30 am to 2:30 pm (Mon-Fri) – an 8-hour package to be used within 12 months. Ffsdperp A Uksfx Abvsw Access to Otinus Academy online courses (optional) - MyPlasm – 12-month access - LibreCad – 12-month access

Stanje: novo, Leto izdelave: 2024, Fiber Laser Cutting System FLV-3015-C2 6kW / VF1530-6000W Technical Specifications - Maximum sheet dimensions: 3000 x 1500 mm - X- and Y-axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy (X/Y): ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5G - Power output: 6.0 kW - Power requirement: 40.0 kW - Source brand: Choice of Raycus or MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting Depth - Steel S235: recommended 25.0 mm, maximum 30.0 mm - Stainless steel: recommended 16.0 mm, maximum 20.0 mm - Aluminium: recommended 12.0 mm, maximum 14.0 mm Construction The machine features a highly stable welded frame. High-speed, high-precision head movement is achieved using Japanese Fuji servo drives. Automatic lubrication system for axis guides. User-Friendly Operation Loading heavy sheets is made easier by integrated transport balls in the table surface, ensuring smooth sliding during loading. Small finished parts are also easy to retrieve thanks to trolleys located below the machine, which can be conveniently pulled out by a practical handle. RayTools cutting head with autofocus Otinus Protect (optional*) This product provides dedicated protection for your laser source. With this service, you ensure uninterrupted operation in your business. We safeguard your production so that you can complete your orders on time. Voltage stabilizer (optional*) Control Panel The computer operates on Windows 10 and uses CypCut software for editing, offering functions such as design, file import and export, work optimization. All installed software includes lifetime licenses. The machine is equipped with a wireless controller. Professional Support We maintain ongoing contact with our customers. With every machine purchase, you receive a technician hour package for professional support from Otinus engineers. Otinus Academy Training Software With this machine purchase, you receive one-year access to online courses – ideal for onboarding new staff or refreshing training knowledge. Scope of delivery includes Ffsdpfx Aboh Hfphovjw 2-day operator training and machine installation - Day 1 (up to 8 hours) – Commissioning and control system training - Day 2 (up to 8 hours) – independent operation under the supervision of our technician, including programming of specific parts. Consultation by our specialists - By phone: 7:30 to 21:00 (Mon-Sat) – 8-hour package to be used within 12 months. - Online: 7:30 to 14:30 (Mon-Fri) – 8-hour package to be used within 12 months. Access to Otinus Academy online courses - LibreCad – access for 12 months Additionally you receive - CAD drawing package

Stanje: zelo dobro (rabljeno), Naprodaj robusten merilni pripomoček priznanega nemškega proizvajalca AbaWerk Aschaffenburg. Izdelan iz litega železa, opremljen z dvema kaljenima središčnima konicama za vpenjanje gredi in cilindričnih delov. Idealen za uporabo z orodnimi mikroskopi, merilnimi projektorji ter pri kontroli kakovosti. Tehnični podatki: • Proizvajalec: AbaWerk Aschaffenburg (Made in Germany) • Razmak konic: cca 115 mm • Stabilna, težka litoželezna osnova – varno vpenjanje • Možnost vrtenja obdelovanca med konicama • Stanje: rabljen, popolnoma delujoč Pripomoček je izdelan v industrijskem razredu – natančnost in vzdržljivost, zaradi katerih so takšni primerki iskani v metrologiji in orodjarnah. Fodpfx Abjw Sav Isvsfw

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Na voljo je Corona predobdelovalna naprava Ferrarini & Benelli za površinsko aktivacijo neprevodnih materialov v neprekinjenih proizvodnih procesih. Tip generatorja: C15/4N, izhodna frekvenca: 15kHz, vrsta elektrod: večvaljne valjčne elektrode, največja širina obdelave: 200 mm. Ogled na lokaciji je mogoč. Ffedpfx Aoyn N Avjbvsw

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je Corona predobdelovalna naprava AFS. Moč: 10 kW. Dokumentacija je na voljo. Ogled na lokaciji je možen. Ffjdpoyn N A Ajfx Abvjw

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 2.800 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 50 mm, hitrost pomika os X: 140 m/min, hitrost podajanja osi Y: 90 m/min, hitrost podajanja os Z: 50 m/min, dolžina obdelovanca (maks.): 2.800 mm, širina obdelovanca (maks.): 1.000 mm, vrsta upravljanja: CNC krmiljenje, Visokozmogljiv CNC vrtalni center KDT KD-610NHZ za šeststransko obdelavo obdelovancev. Takoj na voljo iz zaloge. Zgornje in spodnje vrtalne enote. Natančna obdelava in velika hitrost. Idealno za proizvodnjo korpusnega pohištva. Ogled stroja možen po dogovoru. Ffodpfx Asymz Alsbvsw

Stanje: rabljeno, Universal temperature control unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 litres Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor output: 0.37 kW Ffsdpfx Aog Rhx Ujbvsw Circulating water supply & return: G 3/8" Cooling water supply & return: G 3/8" Total power: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Temperature control medium: water - Temperature controller with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K - Water circulation pump: SPECK - An external chiller is required for cooling (the chilled water is supplied to the temperature control unit) - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg Good condition

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, nosilnost: 45.000 kg, lastna masa: 3.800 kg, skupna dolžina: 8.000 mm, gradbena širina: 2.500 mm, Specialna naprava Stanje: Pripravljeno za uporabo in popolnoma funkcionalno Tehnično stanje: zelo dobro Ffjdpfx Asyn St Debvsw SL: Večnamenska prečka za reachstacker z 27 dvižnimi ušesi in 2 odlagalnima nosilcema

Stanje: dober (rabljeno), Leto izdelave: 2022, CNC Heidenhain TNC640, miza 2.500 x 4.000 mm, osi X/Y/Z: 4.000/2.500/1.300 mm, 5-osna univerzalna glava, 18.000 obr/min, držalo orodja HSK-A63 po DIN 69893, 120 orodij, notranje hlajenje skozi vreteno (IKZ). Ffsdeymm Elopfx Abvsw

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalna teža: 7.000 kg, Leto izdelave: 2008, številka stroja/vozila: CRG- 442812008-l, v odličnem stanju Ffedpfx Aboylml Novsw

Stanje: rabljeno, Leto izdelave: 2011, Dolžina 300 mm Ffedpfowmwwaex Abvew Višina konic cca 30 mm Premer 0,5 - 52 mm Teža stroja cca 0,103 t Potreben prostor cca V 0,84 x D 1,00 x Š 0,435 m Servisirano in kalibrirano pri podjetju Studenroth dne 24.07.2024 Naprava za merjenje dolžine in premera: Oprema/Dodatki: - Programska oprema - Monitor in računalnik - Tehnična dokumentacija

Stanje: skoraj kot novo (rabljeno), Tuljava: 24VDC Področje uporabe: Varnostno vezje Širina: 90 mm Višina: 87 mm Globina: 120 mm Teža: 515 g Fsdpeytprbjfx Abvsfw Stanje: Kot novo

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 575415, Teža: 6.700 kg, različna periferija, upravljanje, 1 manipulacijski sistem OPS INGERSOLL IMC 5, leto izdelave: 2008, serijska št.: 583080, teža: 1.800 kg, 1 hladilna enota M.T.A. TAE EVO M10, leto izdelave: 2012, 1 protipožarni sistem KRAFT & BAUER FB 703. Ffedpfxsyidk Ie Abvsw

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Chip extraction unit CORMAK FM230A + 2.5 m hose The CORMAK FM230A chip extraction unit is a high-performance sawdust extractor designed for the efficient removal of wood chips, shavings, and dust generated during woodworking processes. This compact chip extractor is perfectly suited for joinery workshops, production plants, and home workshops where effective dust extraction at workstations is required. The model comes equipped with a flexible extraction hose, 2.5 m in length, allowing quick connection of the chip extractor to woodworking machines such as planers, table saws, spindle moulders, or thicknessers. This setup enables the dust extraction system to be easily positioned anywhere in the workshop, ensuring efficient removal of dust and chips directly from the generation source. Fsdpeytn Tdsfx Abvjfw A powerful extraction fan delivers an airflow rate of up to 1080 m³/h, ensuring fast and effective suction of wood dust and chips. Its robust construction and metal impeller guarantee stable operation, high durability, and reliability—even under intensive use in a carpentry environment. The mobile design with wheels makes it convenient to move the device between workstations, and the integrated filtration system with collection bags effectively separates the air from the wood chips. As a result, the wood dust extractor keeps the workshop clean and improves both working comfort and safety. Key Features - Includes 2.5 m Ø100 mm extraction hose - High extraction efficiency – up to 1080 m³/h - Powerful fan for wood chips and shavings - Single-phase motor 0.75 kW / 230 V - Durable metal impeller for chip extraction - Mobile design with transport wheels - Efficient filtration system for chips and wood dust - Large waste bag for extended operation - Compact design ideal for woodworking shops Applications The CORMAK FM230A chip and dust extractor is designed for use with a variety of woodworking machines that require effective dust extraction: - Planers and jointers - Thicknessers - Table saws - Spindle moulders - Wood sanders With its high airflow rate, the dust and chip extractor effectively removes debris generated during woodworking, improving visibility at the workplace and reducing airborne dust. Standard Equipment - CORMAK FM 230A chip extractor - 2.5 m extraction hose Ø100 mm - Filter bag - Waste bag - Clamping bands - Mobile base with wheels Technical Specifications Motor power: 0.75 kW Power supply: 230 V / 50 Hz Extraction capacity: 1080 m³/h Motor speed: 2800 rpm Vacuum: 1000 Pa Noise level: 68 dB Number of bags: 2 Suction inlet diameter: 100 mm Hose length: 2.5 m Bag capacity: 90 l Height: 1800 mm Width: 750 mm Length: 450 mm Weight: 27 kg

Stanje: rabljeno, Fiber laser, fiber laser cutting system with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Model: HD-F III 3015 III BH-IPG 2kW Serial number: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device up to Ø 400 mm Laser power: 2,000 watts (fiber laser) Output power: 0.2 to 2 kW Wavelength: 1070–1080 nm IPG power demand: 6.4 kW/hour - Polarization: random - Collimation focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter single mode 50, 100, 200, 300 μm - Maximum power consumption: 42 kW - Machine power consumption: 20 kW - Filter power consumption: 4 kW - Chiller power consumption: 10+1 kW - Resonator power consumption: 7 kW Mild steel sheet thickness max.: 12 mm - Stainless steel sheet thickness max.: 6 mm Fedpfx Askdnv Tebvjfw - Aluminum sheet thickness max.: 6 mm - Copper sheet thickness max.: 3 mm - Brass sheet thickness max.: 6 mm X-axis working area: 3060 mm Y-axis working area: 1530 mm Z-axis working area: 160 mm Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 200 kg/m² - IPG fiber laser resonator next to machine - Water recooling unit for laser source and cutting head installed - Under-table extraction and extraction/filter unit installed - With double exchange table - Tube laser with 4-jaw chuck and large spindle bore next to flatbed - Steady rests for tube laser on linear guides - With CAD software - With nesting software - With tube laser software Very good condition

Stanje: rabljeno, No. 10031 Mobile Screening Plant with Trailer Spaleck SEWU 2400 x 5000 Used According to our customer / the previous owner, the machine is fully functional and can be inspected and tested on site. Screening Plant Spaleck SEWU 2400 x 5000 Used, year of manufacture 2012 Trailer Multi-Trans ZAL 4PA Used Load capacity: 47,000 kg Unladen weight: 8,600 kg Conveyor Belt STK Metall ML-BAND Used, year of manufacture 2012 Sale on behalf of the customer, ex site near 54634 Bitburg, without dismantling, transport or assembly. Dismantling, transport, and loading by us available as an option. Fjdeyl Sg Sopfx Abvofw Errors in description and price excepted. To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale takes place in as-is condition. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. No warranty is given for used machines; sale is as seen and tested. Pictures and videos serve as examples and do not represent the actual scope of delivery. Payment terms: Prices plus statutory VAT, payment before collection or dispatch. Delivery terms: ex site.