Žage nakup rabljenega (4.041)

Stanje: rabljeno, Leto izdelave: 1996, skupna višina: 2.900 mm, skupna dolžina: 4.500 mm, skupna širina: 1.400 mm, - Teža: 520 kg Fsdpjxhcggsfx Ah Dsgh - Največja višina reza navpično [mm]: 2200 - Največja višina reza vodoravno [mm]: 1950 - Največja širina reza [mm]: 4200 - Največja globina reza [mm]: 50 - Minimalni premer žaginega lista [mm]: 250 - Maksimalni premer žaginega lista [mm]: 250 - Premer osi žaginega lista [mm]: 250 - Vodoravno rezanje: Da - Navpično rezanje: Da - Leto izdelave: 1996 - Dokumentacija na voljo: Ne - Serijska številka: 12656 - Transportne mere: 4500mm x 1400mm x 2900mm (d x š x v) - Transportna teža [kg]: 520kg Finančne informacije DDV: Navedena cena je brez DDV. Možnost odbitka DDV za podjetja: Da Dostava in odkupi možni kadarkoli za vso industrijsko opremo. Glenn Smeets

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Fsdpfx Ahsfn Ando Dsgh Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 8,7 kW (11,83 KM), skupna masa: 99 kg, Leto izdelave: 2025, Husqvarna FS 400 LV, novo, vključno z diamantno rezalno ploščo! Fgjdpfxsxl Tcte Ah Doh Teža: 99 kg, premer plošče: 500 mm, pritrditev plošče: 25,4 mm. Maksimalna globina reza: 187 mm, rezervoar za vodo, bencinski motor Honda GX 390 z močjo 8,7 kW. Poraba goriva: 4,3 l/h. Na voljo tudi v drugih velikostih! Lokacija stroja: skladišče D-46514 Schermbeck. _____ Kupite Husqvarna FS 400 LV | Rezkar za fuge 500 mm premer plošče | Bencinski rezkar za fuge Honda GX 390 | Rezkar za fuge beton asfalt | Rezkar za fuge z rezervoarjem za vodo | Rezanje z malo prahu | Nov rezkar za fuge iz zaloge | Profesionalni gradbeni rezkar za fuge | Rezkar za fuge za cestogradnjo Področja uporabe: - Rezanje fug in popravila v cestogradnji in gradnji globokih gradenj - Asfaltna in betonska dela - Sanacija voznih površin in pločnikov - Dela na kanalizaciji in cevovodih - Gradbena podjetja, najemne baze, obrtniška podjetja - Tehnologija optičnih vlaken

Stanje: novo, Model designation: Shark 282 CCS Fgodpjgvkbcofx Ah Dsh

Stanje: rabljeno, Leto izdelave: 1999, skupna višina: 3.010 mm, skupna dolžina: 6.660 mm, skupna širina: 2.070 mm, Poids : 915 kg Prix : Sur demande - Hauteur de coupe verticale max. [mm] : 2200 - Hauteur de coupe horizontale max. [mm] : 2100 - Largeur de coupe max. [mm] : 5300 - Profondeur de coupe max. [mm] : 80 - Diamètre de lame min. [mm] : 300 - Diamètre de lame max. [mm] : 300 - Diamètre d’alésage de lame [mm] : 30 - Coupe horizontale : Oui - Coupe verticale : Oui - Année de fabrication : 1999 - Documentation disponible : Non - Marquage CE présent : Oui - Numéro de série : 29764 - Tension [V] : 400 - Puissance [kW] : 7.0 - Dimensions de transport : 6665mm x 2070mm x 3015mm (L x l x H) - Poids de transport [kg] : 915kg Informations financières TVA : Le prix indiqué s'entend hors TVA Fgjdpfoxhcgaex Ah Djh TVA/régime de la marge : TVA récupérable pour les entreprises Livraison et reprise possibles à tout moment pour tout équipement industriel Glenn Smeets

Stanje: novo, Cutting capacity at 90 degrees (round): 240 mm Fedpfxjfgyh Ho Ah Dogh Cutting capacity at 90 degrees (square): 240 mm Cutting capacity at 90 degrees (rectangular): 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.4 t The Z252/DGH is equipped with: - Hydraulic semi-automatic operation - Double mitre, 60° left / 45° right - Emulsion pump - Machine base - Saw blade - 400V, 16A plug The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Model designation: Shark 281 SXI evo Fedpogvkglefx Ah Djgh

Stanje: rabljeno, Leto izdelave: 2003, skupna višina: 1.980 mm, skupna dolžina: 3.450 mm, skupna širina: 940 mm, Teža: 500 kg - Najv. višina reza vertikalno [mm]: 1350 - Najv. širina reza [mm]: 2500 - Najv. globina reza [mm]: 55 - Najv. premer žaginega lista [mm]: 250 - Horizontalno rezanje: Da - Vertikalno rezanje: Da - Leto izdelave: 2003 - Dokumentacija na voljo: Ne - Serijska številka: 301073 - Transportne mere: 3450 mm x 940 mm x 1980 mm (d x š x v) - Transportna teža [kg]: 500 kg - Št. transportnih paketov: 1 Finančne informacije DDV: Cena ne vključuje DDV DDV/obrnjena obdavčitev: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Fgodpfx Ahexhcfve Doh Glenn Smeets

Stanje: novo, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Cutting area at 90 degrees (square): 220 mm Fgodpfxjfgyh Ee Ah Djh Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - automatic cutting - base frame - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Model designation Fodpfegvkchjx Ah Dsgh Shark 281 CCS

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting Fjdsfgyh Uspfx Ah Dogh 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Model designation Fgsdpfsl Sva Isx Ah Deh SHARK 331-1 NC 5.0 SPIDER

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Fodpofgyiajfx Ah Degh Band speed 18 – 100 m/min Table height 940 mm Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Model designation Fgedpegvkafofx Ah Deh Shark 332-1 SXI evo

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Fedpofgyicjfx Ah Djgh Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Model designation Fgodpfjgvquwjx Ah Djh Shark 332-1 CCS

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: Fgjdefg E Hlopfx Ah Dsh 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Fgedjd Iipxopfx Ah Dsh Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Fgedpfx Ahod Iip Ns Doh Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice Fgodpfx Aofgyh Sjh Dsh - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. Fgjdpfx Aefg E Hpjh Deh - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Fgsdpfxed Iipts Ah Doh Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter cut left 60° / right 45° • Heavy-duty industrial hydraulics, 18 bar • Optimal access to the workpiece • Ammeter for monitoring: - Cutting force optimization - Blade life - Cut accuracy • Hydraulic vice: automatic clamping and release • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, movable • Height sensor for material (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material, or for serial cuts, start cutting immediately 4. Saw blade stops 5. Raise saw frame slightly above material 6. Release vice

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Fsdpfed Iip Rsx Ah Degh Shipping cost share: 120 EUR

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Fodpfsfd Abasx Ah Degh Illustration shows semi-automatic version.

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m Fjdpfxjfgyh Rs Ah Djgh SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system