Škrat Vodo nakup rabljenega (2.153)

Stanje: rabljeno, Leto izdelave: 2007, Prominent water treatment system, consisting of: 1. Softening: Raw water is supplied to the twin softener. Only one vessel is in operation at a time, while the other is in regeneration or on standby. In the softener, calcium and magnesium ions are replaced by sodium. The system is equipped with a volume counter, which switches to the other vessel once the preset quantity has been reached. Regeneration is carried out with brine from the brine tank. The residual hardness at the outlet is 0 °dH. 2. Reverse Osmosis: The reverse osmosis unit fills the permeate tank with demineralized water (permeate). Depending on raw water quality, water temperature, membrane condition, and correct system settings, different conductivity levels and operating pressures are achieved. Upon commissioning, the following flow rates are set: permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. Permeate Tank and Ozonation: The non-pressurized 500 l permeate tank is equipped with adjustable level control. For ozone treatment, the water in the permeate tank circulates through an adjustable ozone dosing point. Ozone is produced by the ozone generator via silent electrical discharge from air and is available as an ozone/air mixture. Air and un-dissolved ozone rise to the top of the permeate tank and are discharged via the residual ozone destructor. For monitoring, redox potential and ozone measurements are taken downstream of the centrifugal pump. Ozone dosage is set via the touch panel. Control can be selected by either redox potential or ozone concentration. Additional machine information: water softening, reverse osmosis unit, ozone disinfection Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Kodpfx Agjw Uvdgsksdw Max. operating pressure: 16 bar Power: 2 A Voltage: 230 V Frequency: 50 Hz Water supply: < 5 bar (cooling water) Compressed air: 5.5–6.5 bar (max. 10 bar); max. 0.37 Nm³/h Operation/control: Simatic S7-300, touch panel Installation: free-standing Base frame: fully assembled on pipe frame with dished ends Equipment: reverse osmosis unit, reaction tank complete with residual ozone destructor, ozone generator, ozone gas warning device, ozone and redox transmitters, control cabinets with PLC/control system

Leto izdelave: 1999, Stanje: dober (rabljeno), For sale is a water treatment plant from ENVOTECH, model 0320, manufactured in 1999. In 2016, a new stainless steel reaction tank from Leiblein with dimensions of 500*500*400 mm was added to the system. Kjdpfepl Tqtjx Agkodw The plant is fully operational, and the contact details of the responsible service technician are available and can be provided upon purchase. Technical Data & Information: - Constructed in stainless steel - Includes oil separator based on the coalescence principle - Includes automatic cleaning - Integrated pumps for wastewater, concentrate, and distillate - Frequency-controlled compressor motor - Model: 0320 - Nominal throughput l/h: 320 Energy consumption: - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V – 50 Hz Dimensions (LxWxH): 245x155x265 cm Weight: approx. 2600 kg Sound pressure level: 75 dB All data refer to operation with water. Loading and shipping across Europe can be organized upon request. Prices are plus VAT. Inspection possible by appointment. Contact us – our team is looking forward to assisting you. Ch3mj0l3eg Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: novo, Leto izdelave: 2020, Rezervoarji iz prevlečene najlonske tkanine zagotavljajo priročno začasno shranjevanje tekočin na lokaciji, obenem pa so dovolj vzdržljivi za večkratno uporabo! Primerni za kratkoročno ali dolgoročno shranjevanje tekočin. Robustna kakovost, standard ameriške vlade. Za shranjevanje jih je mogoče zložiti v kompakten format. Nahajajo se lokalno na Madžarskem (EU) Kedpfx Aexfb Iwogkedw

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, pritisk: 75 letvica, skupna višina: 2.250 mm, skupna širina: 2.200 mm, skupna dolžina: 7.000 mm, temperatura: 40 °C, raven hrupa: 87 dB, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Technical Short Description Industrial Water Treatment System – SIMPEC RO Double Pass 8000 44 8 The system is a fully automatic, two-stage reverse osmosis (RO) unit designed for industrial applications with high-purity water demand. It is engineered for process water recycling, landfill leachate treatment, biogas and agricultural operations, as well as the food and chemical industries. The system is pre-assembled on a stainless steel skid and includes all essential components for water treatment, including chemical dosing, filtration, high-pressure pumps, and automation. Key Features - Two RO stages (36 + 8 membranes) - Pre-filtration with multimedia and cartridge filters - Automatic pH correction (acid / caustic) - Dosing unit with 3 dosing pumps Ksdjw Uf Ihjpfx Agkedw - Siemens S7 control with TP700 HMI - Integrated CIP (clean-in-place) system - Fully piped and wired (plug & play) - High-quality materials (AISI 304 / 316, FRP) - Pressure sensors, conductivity probes, flow meters ⚙️ Process Description Feed & Pre-Filtration Raw water is supplied via a stainless steel pump to a multimedia filter (MMF) for removal of suspended solids, followed by fine filtration through cartridge filters. First RO Stage (High Pressure) The pre-treated water is fed by a 44 kW high-pressure pump into six RO pressure vessels with a total of 36 membranes. Result: Permeate with < 1000 µS/cm conductivity. Second RO Stage (Polishing) The permeate from stage one is further purified through two RO vessels (8 membranes). Result: Ultrapure water with conductivity < 100 µS/cm. Chemical Dosing Three dosing pumps control: - Antiscalant / acid in the feed - NaOH for concentrate pH correction Automatic Control All operating parameters (pressure, conductivity, flow, pH, temperature) are monitored by sensors and displayed on the Siemens HMI. Operation is fully automatic with start/stop cycles and alarm management. 🌍 Typical Applications - Biogas and agricultural operations (digestate and wash water) - Landfill leachate treatment - Process water recycling in industrial plants - Food and beverage industry - Pretreatment for evaporators / distillation units 🧪 Technical Highlights - High water recovery rate (up to 90%) - Low operating costs due to energy-efficient pumps - Robust and low-maintenance design - CE-compliant, IP55 protection class - Low-noise operation (< 87 dB(A)) 📦 Scope of Supply - Complete RO skid with two RO stages - Control unit (Siemens S7 + HMI) - High-pressure pumps (Grundfos) - 3 chemical dosing stations - Prefiltration unit (MMF + CF) - CIP system - Documentation & wiring diagrams 💡 Optional Extensions - Evaporator modules (Zero Liquid Discharge) – available as an option - Additional pre-filtration (DAF, sand filter, UF) - Replacement membranes / service package - Worldwide installation and commissioning

Stanje: rabljeno, Dimenzije: Širina: 90 cm Kdedpfxjxpnb Eo Agkew Dolžina: 350 cm Globina: 21 cm Skupna višina: 68 cm Premer izhoda: 4,8 cm Cena je navedena na kos, na voljo sta dva enaka kosa.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et100, Suitable for use as a fire water tank, fire water reservoir, fire water retention tank, stormwater retention tank, cistern, water tank, etc. 100,000 liter underground tank for storage of rainwater, service water, fire water, etc. Dimensions: Diameter = 2.90 m – Length = approx. 16.00 m The tank features a manway DN 600 with dome cover, is used, internally emptied and professionally cleaned, and externally coated with a bitumen layer/bitumen insulation. Minor insulation damage from removal and transport may be present on the tank. Price ex location Söhrewald – loaded free of charge – Delivery can be offered at low cost. General information: Kdodpfx Agsctzy Rekew You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and can empty, clean, dismantle, and remove them professionally with certified expertise according to the German Water Resources Act (WHG).

Stanje: rabljeno, Leto izdelave: 1993, Berkefeldov sistem za mehčanje vode: ionski izmenjevalec za zmanjšanje trdote zaradi kalcija in magnezija z 2 filtrnima rezervoarjema in solno posodo, primeren za neprekinjeno delovanje. Leto izdelave: 1993. Zmogljivost: 6000 l/h Dodatno: ionski izmenjevalec Kodpfx Aew Uc Ewsgkodw Zmogljivost: 6000 l/h Obratovalni nadtlak: 10 bar

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Parts Cleaning Machine / Spray Cleaning System Type L102 Fully automatic hot water parts washer with basket drive via gear motor, 2 stainless steel washing pumps (Make: Lowara), and 2 three-sided circulating spray systems. Complete system insulation included. - Basket diameter: 910 mm - Usable height: 520 mm - Maximum loading weight: 250 kg - Spray pressure: 2x 3 bar - Tank capacity: 175 liters - Heating: electrically adjustable (room temperature to 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Wash time can be freely set (minutes and hours) Entire cleaning machine (internal components and outer housing) made of stainless steel 1.4301 Water circulation system and loading basket made of stainless steel 1.4301 Complete system insulation (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking mechanism Bath cover with fine filter (2,000 micron) 2 suction filters for pump protection Kjdpfx Agjhl H Uuokedw Operating hours counter Steam vapor extraction including condensate return Parts washer is in near-new condition (test/demo unit) This offer is non-binding and subject to prior sale. Changes, errors, and intermediate sale expressly reserved.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: MTRE 15-9/5 | 10-10/10 | 5-10/10, Rabljene Grundfos MGE112MC2 centrifugalne vodne črpalke Proizvajalec: Grundfos Različne konfiguracije: Črpalka MTRE 15-9/5 | Krmilnik MGE112MC2 Črpalka MTRE 10-10/10 | Krmilnik MGE132SD2 Kodpfxsxphqto Agkodw Črpalka MTRE 10-10/10 | Krmilnik MGE112SB2 Črpalka MTRE 5-10/10 | Krmilnik MGE1100LC2 Teža: od 42 do 74 kg. Moč: od 4,0 do 7,5 kW Napetost: 50/60 Hz, 380-400 V.

Stanje: generalkompletno obnovljen (rabljeno), 60 m³ / 60,000 L Firefighting Water Tank According to DIN 14230 Tank volume: 60,000 litres / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, grade S 235 JRG 2 Underground tank for subterranean storage, single- or double-walled, suitable for pedestrian and drive-over areas (load class SLW 30) with 1 manhole (external diameter 720 mm), equipped with blank cover, gasket and bolts. Available immediately either new or used! The tank is emptied, cleaned, refurbished and professionally leak-tested by our certified workshop. The tank complies with the requirements of DIN 14230 (Underground Firefighting Water Tank): - Firefighting water suction connection in accordance with DIN 14244, fitted with a fire brigade coupling / fixed coupling type A as per DIN 14319, design type B, without level gauge - Ventilation flange nozzle NWN 100 with cap, overall length approx. 1,300 mm, suitable for 800 mm underground coverage and 500 mm above ground - Exterior protected by bitumen coating - Upon request, we can provide an internal full lining with bitumen-based or epoxy resin coating (for corrosion protection) - It is also possible to fit the tank with an internal plastic liner Cost-effective delivery with our own truck is available. Simply provide your delivery location and you will immediately receive the exact freight costs. Inspection by appointment is possible at any time. If you need further information, please call us or send an e-mail to b.barth(at)barth-tank.de We also accept trade-ins and purchase tanks/containers of all kinds. Please contact us for details. We always have tanks of similar types in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres Kdodpehh Srujfx Agksw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Cooling capacity at water supply/return temperature of 15/10°C: 2.3/2.1 kW Flow rate: 0.5 m³/h Electrical connection: 380 V, 1 kW Kdodpfer Ezdrsx Agksw Space requirement: 900 x 600 x 1020 mm Weight: 160 kg Water connections reduced to 1/2".

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et100-neu-löwa, 100,000 Litre Firewater Tank – Underground Storage Tank – Retention Tank According to DIN-EN 12285-1, Tank Class A, suitable for media up to 1.1 kg/dm³, single-walled, interior bare steel, exterior with professional insulation. Tank suitable for installation in walkable areas (not suitable for vehicular traffic). Dimensions: D = 2.90 m – L = approx. 15.80 m The tank is equipped with a DN 600 manway with dome cover, bolts, and gasket. Tank ex works, loaded free of charge On request, the tank can be fully equipped with a firewater suction connection, meeting the requirements of DIN 14230 – Underground Firewater Tanks: Firewater Suction Connection / Suction Line made of V2A stainless steel, according to DIN 14230, comprising: - 1 piece suction line DN125 made from V2A stainless steel, with Storz A-coupling and Storz A-blank cap - 1 piece vent pipe DN100 with stainless steel V2A hood - 1 piece anti-vortex plate mounted on suction line - 1 piece information sign "Firewater Extraction Point" - 1 piece dip pipe with measurement rod for level monitoring - 1 piece dome cover with bolts and gasket The suction line can be used as both filling and extraction pipe. All components are supplied ready for installation – ex works – If required/desired: Installation of an above-ground firewater suction connection, according to DIN 14244 – Form B, including A-coupling according to DIN 14319 and A-cover cap according to DIN 14319. Housing made of cast iron – exterior with epoxy resin coating Optional: Tank interior can be completely sandblasted and coated for service water/firewater application. Kdodod Tc Nuepfx Agkjw The tank is suitable as a water tank, firewater tank, firewater retention tank, rainwater retention tank, retention tank, rainwater storage, retention cistern, cistern, etc. General: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. We also offer other (new and used) tank installations and rental units! Furthermore, we buy existing tank systems and can, with certified specialist qualifications according to the German Water Resources Act (§ 62 WHG), properly drain, clean, dismantle, and remove them.

Leto izdelave: 1991, Stanje: rabljeno, Vsebina: 15 hl Kdedpfxew Tml Ee Agkew Periferija: črpalka

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, • 4 new EDI cells MK3 are available Kedpfjwy Uu Asx Agkedw • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled

Stanje: rabljeno, 100.000 litrov – podzemni rezervoar - dvojna stena - očiščen - 2 kupoli - prisotne rahle sledi odstranitve - možnost notranjega premaza po želji - dovoljenje za uporabo sanitarne in požarne vode Nalaganje in prevoz sta lahko ponujena! Odgovarjamo samo na resna in kredibilna povpraševanja z navedbo: Kodpfxjxcgg Te Agksdw imena, e-poštnega naslova in telefonske številke.

Stanje: rabljeno, Leto izdelave: 1900, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 6.600 m³/h, končni tlak: 2,5 letvica, moč: 610 kW (829,37 KM), vhodna napetost: 6.600 V, vhodni tok: 69 A, vrsta vhodnega toka: Klimatska naprava, 2 kosa črpalk za hladilno vodo. Vertikalna cevna črpalka z odprtim spiralnim kolescem Proizvajalec: KSB Tip: SEZ N 8-60 Oblika kolesa: odprto spiralno Število kolesc: 1 Potopna globina: 2550 mm Tesnilo gredi: drsno obročasto tesnilo Radialni ležaj: RESIDUR vlaknasta keramika Nosilni ležaj: segmentni drsni ležaj Hlajenje: lastno hlajenje, CuNiFe hladilnik Število obratov: 745 / 600 / 496 vrt/min Pretok: 6600 / 5750 / 4750 m³/h Dvižna višina: 25 / 15,5 / 10,5 metra Moč na gredi: 525 kW / 280 kW / 180 kW Učinkovitost črpalke: 85,7 % Temperatura medija: 20°C NPSH: 8,0 m Ohišje: S235JRG2 Gred: 1.4313 Kdsdpjxb Tvxefx Agksw Koleso: 1.4409 Premer kolesa: 766/571 mm Elektromotor: Siemens 1LA44548 AW94Z Moč: 610 kW Napetost: 6600 V Tok: 69 A Vključno s frekvenčnim pretvornikom Mere: Tlačni priključek: DN 800 Tlačna stopnja: PN 10 Teža črpalke brez motorja: 4100 kg Dolžina z motorjem: 7723 mm

Stanje: pripravljen za uporabo (rabljen), Cooling capacity at water supply temperature of 15/10°C: 4.0/3.1 kW Ksdpfx Agjr Ezfaokodw Flow rate: 1.3 m³/h Electrical connection: 380 V, 1.5 kW Required space: 900 x 600 x 1020 mm Weight: 180 kg Water connections: 3/4"

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et50, Storage tank with 50,000-litre capacity for the storage of service water / fire-fighting water or for use as an irrigation tank, sports field irrigation, etc. Dimensions: Diameter = 2.50 m - Length = approx. 10.70 m The tank is pre-owned, internally emptied and professionally cleaned, and externally coated with a bitumen layer / bitumen insulation. Minor insulation damage from disassembly and transport may be present on the tank. Price ex Söhrewald – loaded, free of charge – For use as a fire water tank, we can equip the tank completely with a fire brigade suction connection: consisting of: - 1 pc. suction pipe DN125, stainless steel - V2A, with Storz A-fixed coupling and Storz A-blank coupling, - 1 pc. vent pipe DN100 with hood, stainless steel - V2A, - 1 pc. anti-vortex plate mounted on the suction pipe, - 1 pc. sign "Fire water extraction point", - 1 pc. dip tube with dipstick for fill level measurement, - 1 pc. tank access cover with screws and gasket. The suction pipe can be used both as a fill and extraction pipe. All components are supplied ready for installation – ex works – If requested/required: Installation of a fire water suction connection, above-ground, to DIN 14244 - form B, incl. A-fixed coupling according to DIN 14319 and A-cover cap according to DIN 14319. Housing made of cast iron – with external epoxy coating. General information: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! Furthermore, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle, and transport them away. Kdsdpscydt Usfx Agkjw

Stanje: rabljeno, Stoječi rezervoar za toplo vodo z notranjo grelno kačo za ogrevanje s paro. Prostornina cca 30 hl. Stroj (dodatno): grelni rezervoar Prostornina cca: 3000 l Širina: 1400 mm Ksdpfx Agjw Tdx Askjdw Višina: 2800 mm Material: nerjaveče jeklo Položaj / postavitev: samostoječ Osnovna konstrukcija: cilindričen rezervoar na cevastih nogah Oprema: grelna kača, prikazovalnik temperature, iztok na sredini dna, zgornja revizijska odprtina, preliva.

Stanje: novo, Leto izdelave: 2025, Wir produzieren und installieren komplette Anlagen für Wasser und Säfte, sowohl still als auch kohlensäurehaltig. Die komplette Linie umfasst: Flaschenblasmaschine, automatisierte PET-Zuführung, kompakte Wasch-, Füll- und Verschließmaschine. Jede Verschließmaschine verfügt über einen automatischen Verschlusszuführer und eine Kappen-Sterilisationsstation. Wir liefern Hochleistungsfilter und eine automatisierte CIP-Hygienisierungsstation. Optional können wir eine Karbonisierstation mit Kühler und Wärmetauscher ergänzen. Nach dem Befüllen der Flaschen installieren wir eine Röntgen-Inspektionsanlage, einen Ofen zum Erhitzen der Flüssigkeit, eine Wasserblasmaschine zur Reinigung der Flaschen, Etikettiermaschine, Datums- und Chargennummeriermaschine, Flaschenkartonierer, Palettierstation sowie eine Stretchwickelmaschine zur Sicherung der Paletten. Kjdpfx Asu Nad Togkjdw

Leto izdelave: 2012, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 31111455, Termostatická dávkovací a míchací jednotka na vodu, použitá, výrobce STM, model DOMIX 45, rok výroby 2012, výrobní číslo: 31111455. Ksdpfx Agjirmw Dekjdw Kompletní a intuitivní uživatelské rozhraní s digitální membránovou klávesnicí pro snadné nastavení a vyvolání receptů z paměti a třemi digitálními displeji pro indikaci množství vody, nastavené teploty a aktuální teploty měřené vysoce přesnou externí sondou. Referenční stupnice umožňuje snadné nastavení požadované teploty. Maximální tolerance ±1 % při dávkování a ±1 °C v teplotě. Systém bypassu slouží k manuálnímu vypouštění vody nesplňující teplotní požadavky (manuálně v DOMIX 45). Možnost naprogramovat 80 jednoduchých dávkovacích cyklů, z nichž jeden je volný (bez kontroly množství – užitečné v případě poruchy počítadla litrů). Odolná konstrukce z nerezové oceli. Sada pro tři vstupy vody. Možnost nastavení dle sezónních změn. Instalační sada a 2,5 m hadice na výdej z potravinářského plastu s koncovkami z nerezové oceli. Přesnost teploty ±1,0 °C (±1,8 °F) Bypass manuální Přesnost dávkování ±1 % Ovládací rozhraní: alfanumerická klávesnice se třemi sedmisegmentovými displeji, signalizačními kontrolkami a klávesami pro rychlé volby Paměť receptů: 80 receptů Vstupní přípojky: 2 x 1/2” + volitelná manuální 3-cestná sada Průtok při 1 baru a 20 °C: 18 l/min (40 lb/min) Průtok při 5 barech a 20 °C: 40 l/min (88 lb/min) Maximální výdej: 999,9 l; 999 lb + 15 oz; 999,9 lb Výstupní přípojka: 16 mm Regulační rozsah: 1 ÷ 60 °C (34 ÷ 140 °F) Maximální vstupní teplota vody: 65 °C (150 °F) Maximální/minimální vstupní tlak: 5 bar (72,5 psi) / 1 bar (14,5 psi) Externí teplotní sonda: termočlánek PT1000 Třída A Vnitřní teplotní sonda: termočlánek PT1000 Třída A Ovládání externího čerpadla: ano Komunikační rozhraní: RS 485, vstupy pro vzdálený START/STOP Plášť: nerezová ocel AISI 304 Napájení: 208/240V AC – 110/127V AC Maximální příkon: 25 VA Cena: 1 600 € + DPH, k jednání, FCA: Oradea/Rumunsko Chyby, změny a mezitímní prodej vyhrazeny. Mluvíme anglicky. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français / Vorbim romana

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, New device 12 months warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid gelatinization when mixing without the need for ice + Improved dough quality due to freshly chilled, liquid ice water + Precise dosing possible with water mixing and dosing device + Water-carrying components are made of stainless steel and maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems are distinguished by: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath Kedpjivdv Djfx Agkodw + High flow capacity + Compact dimensions + Easy-to-maintain surface structure + Low energy consumption SPECIAL accessories, optionally available at an extra charge: - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters / hour - Peak cooling capacity*: 500 liters / hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Power supply: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 liters / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, New device 12-month warranty Benefits of cooled ice water: + Consistently low batch water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without the need for ice + Fluffier doughs thanks to freshly cooled, liquid ice water + Precise dosing possible via water mixing and dosing unit + Water-carrying parts are made of stainless steel and require no cleaning + Hygienically perfect, clean drinking water Langheinz ice water systems stand out for: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controllers + Stainless steel refrigeration evaporator + Multi-layer stainless steel water heat exchanger + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow performance + Compact dimensions + Easy-to-clean surface structure + Low energy consumption Special accessories, optionally available at extra cost: - Wall bracket made of stainless steel (for model L130 + L170): + 499,-- € net - Machine table (for model L130 + L170): + 589,-- € net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / hot) + 349,-- € net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters / hour - Peak cooling output*: 330 liters / hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Connection values: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet Kdedpfsivdvvox Agkow

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, New device 12 months warranty Advantages of chilled ice water: + Consistently low dosing water temperatures + Precise dough temperature control all year round + Rapid swelling when mixing without the need for ice + Smoother doughs thanks to freshly chilled, liquid ice water + Precise dosing possible via water mixing and dosing equipment + Water-carrying parts are stainless steel and maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems are distinguished by: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel plate heat exchangers + Insulated stainless steel ice water bath + Drain tap in ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra cost: - Wall bracket made of stainless steel (for models L60 & L100): + €319 net - Machine table (for model L60): + €399 net - 3-way changeover valves --- for water mixing and dosing devices with only 2 inlets (cold / warm) + €349 net Technical Data: - Batch size (recommended): up to 15 litres - Continuous output*: 50 litres/hr - Peak cooling capacity*: 90 litres/hr - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 litres/min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg Kdedsivdu Uspfx Agkew - Energy consumption at 100 litres: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, New device 12 months warranty Benefits of chilled ice water: + Consistently low filling water temperatures + Precise dough temperature control all year round + Rapid hydration during mixing without ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible via water mixing and dosing unit + Water-carrying parts made of stainless steel – maintenance-free + Hygienically perfect, clean drinking water Langheinz ice water units are characterized by: + Consistently low water temperatures + High-performance refrigeration units + Cooling systems with expansion valve + Electronic ice bank controller + Stainless steel refrigeration evaporator Kodpfxeivdvke Agkjdw + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available for a surcharge: - Stainless steel wall bracket (for models L130 + L170): + €499 net - Machine table (for models L130 + L170): + €589 net - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters / hr - Peak cooling capacity*: 230 liters / hr - Ice bank: 30 kg - Cooling output (CECOMAF): 1.189 kW - Electrical connection: 230 V - 50Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow at 2 bar: 15 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet