Škatle Za Kruh nakup rabljenega (85.334)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Kdjdov Hm Nmepfx Adkoi Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, General: Cutting width adjustment via handwheel at the front of the machine Digital display for cutting width Saw blade height and tilt adjustment via foot pedal Digital display for saw blade height and angle Scoring unit adjustable by electric motor Crosscut table length stop with digital display Parallel fence foldable CE compliant Saw blade tilting up to 45.5 degrees Maximum cutting height 145 mm Maximum saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/4000/5500 rpm Motor power 5.5 kW Extraction port diameter 120 mm Cutting length 3300 mm Kjdommb Acspfx Adksdi Including operating manual Including tools Dimensions (L x W x H): 3300 x 3800 x 1400 mm Weight approx. 1365 kg Note on used machines: • Technical data is subject to error and prior sale. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!) General: Cutting width adjustment via handwheel at the front of the machine Digital display for cutting width Saw blade height and tilt adjustment via foot pedal Scoring unit adjustable by electric motor Crosscut table length stop with digital display Parallel fence foldable CE compliant

Stanje: novo, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at special price with full manufacturer's warranty. Pro Drive Control: 3.5" colour display with separate keyboard Automatic adjustment of parallel and mitre fences when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last measurement entry (back function) 99 storable cutting programs Grooving: with automatic stepwise positioning of the parallel fence 400V / 50Hz - Europe, scale: mm scale Electromotive height and tilt adjustment 0 – 46° for the main saw blade with automatic cut height correction when tilting the saw unit Machine height 910 mm (standard equipment) The F 45 control panel is mounted at eye level, allowing convenient operation of all axes and easy overview of all settings. Single-handed operation of the swing-away device is easily accessible from the operator's position in front of the machine. Another advantage: nothing obstructs your way at the smooth machine front. INCLUDES OPTIONS: Kdodpsiz Aufsfx Adkei M62003 Template holder M64080 Increased cutting height with saw blade projection up to 204 mm max. M51101 Single-side tilting saw unit with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and lateral adjustment M24037 LED lighting for the scoring unit hazard zone M41010 Table extension, 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Mitre-angle fence, crosscutting up to 3500 m M44443 CNC-controlled parallel fence, cutting width 1300 mm M44450 Front support roller M37003 On/off switch on the double roller carriage Note on used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex location - free loading! • Machines have been cleaned and function-tested. • All machines are purchased as inspected, without any warranty claim. Buyers are free to inspect the machines at the site. • Special agreements only possible in written form. (We only answer inquiries with your address + telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Kdjdshvan Iepfx Adkoi Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Kdsdpfx Aefh Tmmedkoi Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, nosilnost: 2.800 kg, gradbena širina: 2.000 mm, Prikolica za težke tovore Ksdpsyvwygofx Adksdi Stanje: Pripravljena za uporabo in popolnoma funkcionalna Tehnično stanje: dobro Opis: Prikolica TANDEM - 2-osna prikolica HUMER SO WL 3519 - nosilnost 2800 kg - letnik 2013 - pocinkana izvedba - z dvižno rampo (mehansko) - dolžina nakladalne površine 3,50 m - širina nakladalne površine 2 m - višina stranic 40 cm - dovoljena skupna masa 3,5 tone - svetlobni sistem - dobro stanje

Stanje: rabljeno, OTT Tornado - TOP Upravljanje - preko 15-palčnega barvnega zaslona na dotik za popolno avtomatizacijo in najvišje udobje upravljanja CM-CombiMelt-lepilni sistem, primeren za uporabo EVA in PUR talilnih lepil ter vseh običajnih čistilnih granul Enota za lepljenje za spajanje ivernih plošč Avtomatski valjčni magazin Avtomatski magazin za robove Dvojna kapalna enota s samodejnim nagibom 0° / 3° Rezkalna enota za ravnanje robov - rezkanje na ravno - 12 mm Fino rezkanje RADIUS - rezkanje radija - profilni nož R2 - R5 Avtomatizirano kopirno rezkanje - zaokroževanje vogalov Vlečna rezkalna enota - radij - faza Ravna vlečna rezkalna enota Kedpfx Asyuvblodkedi Enota za pršenje sredstva za drsnost - PU Komplet za čiščenje z enoto za fino poliranje Zelo stabilna delovna podlaga z valjčnimi tirnicami - SPREDAJ s škarjastim izvlekom Popolna oprema orodij vključena Stroj je KOT NOV v IZJEMNO DOBREM STANJU Stroj iz upokojitve Prvi zagon leta 2009, zelo malo delovnih ur Možnost leasinga Iz zaloge Lieboch

Stanje: rabljeno, Leto izdelave: 2001, TEHNOLOŠKA LINIJA ZA IZDELAVO STREŠNIH ELEMENTOV 1. Profilirni stroj 2. Sistem za izdelavo izolacijskih elementov 3. Sistem za pripravo AL folije 4. Sistem za lepljenje 5. Pomožni elementi, tehnična dokumentacija, certifikati Kdjdpfxsyv E Aij Adkoi Tipi strešnih plošč, ki se proizvajajo na tehnološki liniji: - strešne plošče modulnih mer 1100mm x 1070mm - strešne plošče polovičnega modula 550 x 1070 mm - strešne plošče brez protikondenznega sloja različnih dolžin (do 6 m)

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 250 h, Funkcionalnost: popolnoma funkcionalen, English language For Sale: Guideway Grinding Machine (Converted from Metal Planer Machine) We offer a solid guideway grinding machine, originally a metal planer machine, now professionally converted. The main advantage is the relatively compact size in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required operational space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades and Equipment: • New ball screw spindles and bearings • 2 new motors + 2 refurbished motors • 3 new inverters • New Siemens SINUMERIK 802C baseline control system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Includes control cabinet, coolant tank with pump, and wall-mounted inverter for small spindle Kdsdoxx Uudepfx Adkji Machine is available for inspection and test by appointment. Feel free to contact us for more details. German language Zum Verkauf: Führungsbahnschleifmaschine (umgebaut aus einer Metallhobelmaschine) Zum Verkauf steht eine robuste Führungsbahnschleifmaschine, die aus einer ursprünglichen Metallhobelmaschine umgebaut wurde. Der große Vorteil liegt in den kompakten Abmessungen in Relation zur Werkstückgröße. Technische Daten: • Außenmaße (LxBxH): 4.800 x 2.500 x 2.000 mm • Erforderlicher Arbeitsraum: 4.800 x 3.500 x 2.700 mm (+ Schaltschrank, Kühlmitteltank, Zugang) • Tischgröße: 2.000 x 800 mm • Abstand zwischen den Ständern: 1.000 mm • Verfahrwege (X/Y/Z): 2.000 / 1.000 / 600 mm Ausstattung & Überholung: • Neue Kugelumlaufspindeln und Lager • 2 neue Motoren + 2 überholte Motoren • 3 neue Frequenzumrichter • Neues Siemens SINUMERIK 802C baseline Steuerungssystem • Großes Schleifspindel: 2.840 U/min – überholt + neuer Motor • Kleine Schleifspindel: 18.000 U/min – überholt • Schaltschrank, Kühlmitteltank mit Pumpe und separater Umrichter für kleine Spindel (wandmontiert) inklusive Besichtigung und Testlauf nach Vereinbarung möglich. Kontaktieren Sie uns für weitere Informationen.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, 180 cm notranja mera, komplet Inox tudi valj. Popolnoma funkcionalna. 14kW motor trifazni priklop. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Kedpfjyvyutsx Adkedi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Vakumska ponlilka za klobase. Handtman VF 608. Polnilka je v zelo dobrem stanju. Dodanih je 10 različnih tulcev. Kdjdpfxsyu Tzvj Adkji

Stanje: novo, Condition: new Delivery time: approx. 2 weeks from order Country of origin: Italy Price: €17,940 Leasing rate: €344.45 Grinding wheel dimensions: Ø 200x78x78 mm Speed: 2800 rpm Distance grinding wheel to table (without magnetic chuck): 300 mm Magnetic chuck: 300x150x55 mm Grinding area: 350x150 mm Table: 500x160 mm Motor power: 3.6 kW Length: 1020 mm Width: 820 mm Height: 2170 mm Weight: 440 kg This surface grinding machine with fixed table is based on the R.V. 500 model, but differs due to its long, quadruple-bearing column with an additional robust column support. Thanks to its rigidity and geometric stability, this surface grinder is ideally suited for grinding precision parts of considerable height: individual or series parts from toolmaking, dies, molds, gears, and much more. The nuts of the vertical feed spindle and the locating pins for axis alignment on this fixed-table grinder also ensure permanently optimal working conditions. Cast iron bed for permanent geometric stability of the grinding machine. Cast iron column, protected by bellows and mounted in four adjustable precision bearings, generously dimensioned for this type of fixed-table grinder. Three-phase motor with double-jacket air cooling to prevent motor overheating during continuous operation and to keep the temperature of the motor shaft and bearings constant. Hardened, ground, and dynamically balanced spindle, mounted in precision ball bearings, generously dimensioned for this fixed-table grinder type and self-adjusting via spring preload to compensate for thermal expansion. Vertical feed spindle mounted in opposing, adjustable ball bearings with optimum movement, ensuring the grinding wheel area remains unobstructed and free from dust deposits in this fixed-table grinder model. Metal bellows for better protection of the grinding machine’s vertical feed spindle. Opposing bronze nuts compensate for long-term wear of the vertical feed spindle in the fixed-table grinder. Alignment pins serve to align the grinder motor to the axis, thus ensuring parallel surfaces over time. The handwheel of the grinder is triple-mounted and connected to the spindle via two helical gears. It is equipped with a graduated drum, supported by an axial bearing, enabling material removal of 0.01 - 0.02 - 0.03 mm per pass. Rapid traverse per handwheel revolution is 2 mm. A rotary knob with lever enables programmable micrometric feed of 0.01 - 0.02 - 0.03 - 0.04 mm per increment, simplifying operation by eliminating the need for continuous step control. A slot enables optimal use of the grinding wheel’s working height and clamping of non-magnetic parts and accessories such as magnetic chuck, self-centering chuck, and angle plates. Kdodpfx Asyv Iqvodksi Low-voltage controls, safety devices, indicator lights, and all required equipment to comply with safety and conformity requirements for this fixed-table grinder type. Handles, form, and dimensions of the fixed-table grinder comply with current ...

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 240 V, vrsta vhodnega toka: Enosmerni tok, vhodni tok: 3 A, Dve etiketirni liniji ( 2x) Etiketiranje. Teža proizvoda od 150g, delovni tlak 6 bar. Lastna tehtnica- vaganje proizvoda Kdjdpfx Asyvd T Esdkoi Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp

Stanje: rabljeno, Leto izdelave: 2006, RASI S80.6L - Tube Bending Machine - Curve and mandrel bending of tubes and round profiles - Spiral bending of tubes - Including tools and documentation - Year of manufacture: 2006 Technical Data - Tube Ø x wall thickness: 82 x 2.6 mm - Max. section modulus: 12.7 cm³ - Min. tube Ø: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Return bending speed (programmable): 0 - 9.3 rpm - Forward bending speed (programmable): 0 - 6.6 rpm - Pressure die rail: fixed / follower - Tool configuration: single-, double- or triple-grooved - Bending direction: right - Feed speed (stepless): 0 - 60 m/min - Feed pressure (steplessly adjustable during bending) - Rotation speed (stepless): 0 - 60 rpm - Max. rotation angle (± 0.1°): unlimited - Max. clamping force: 8 t - Diameter compensation of collet: 6.5 mm - Bending length: 3 - 6 m - Motor power: 11 kW Ksdpsyvvk Defx Adkodi - Operating voltage: 400 V / 50 Hz - Control voltage: 24 V DC - Machine length: < 7000 mm - Weight: approx. 2500 kg

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 2105 mm Mere globina 3485 mm Teža stroja 7500 kg Krmilna enota Znamka MAZATROL Glavni pogon Območje vrtljajev vretena 3500–5000 vrt/min Premer vretena 61 mm Število osi 4 Pomiki Pomik X-osi 530 mm Podajalna sila X-osi 0–6000 mm/min Hitri pomik X-osi 30 m/min Pomik Y-osi ±70 mm Podajalna sila Y-osi 0–6000 mm/min Hitri pomik Y-osi 15 m/min Pomik Z-osi 1065 mm Podajalna sila Z-osi 0–6000 mm/min Hitri pomik Z-osi 33 m/min Konjiček Premer pinole 80 mm Hod pinole 870 mm Stožec pinole MK4 Kdedpfjx D N Ipsx Adkji Orodja Število postaj 20 Največja teža orodja 7 kg Največji premer orodja 90 mm Največja dolžina orodja 250 mm Ta 4-osni Mazak INTEGREX 200 Y je bil izdelan leta 2000. Odlikuje ga največji premer struženja 540 mm, premer zamaha 540 mm ter zmogljivost premera palice 51 mm. Stroj omogoča obdelavo kosov mase do 150 kg ter ponuja področje vrtljajev vretena do 5.000 vrt/min. Opremljen je z Mazak KM 63 sistemom za hitro menjavo orodij s 20 mesti. Če iščete visokokakovostne stružne zmogljivosti, razmislite o našem stroju Mazak INTEGREX 200 Y v prodaji. Za več informacij nas kontaktirajte. Vrsta uporabe Struženje

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: MITSUBISHI Model: M70 Glavni pogon Število osi: 6 Hitrost vretena: 4000 obr/min Tehnične specifikacije Protipremerno vreteno: da Pogonska orodja: da Ta 6-osni Quick-Tech i60 twin je bil izdelan leta 2016 in vključuje CNC stružnico z B-osjo in pogonskimi orodji. Ima glavno vreteno z izvrtino 60 mm, pomožno vreteno z izvrtino 42 mm in največjo dolžino struženja 300 mm. Stroj omogoča simultano 4-osno obdelavo, popolno programiranje osi in ima krmilni sistem Mitsubishi M70. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Quick-Tech i60 twin. Za več informacij o tem stroju nas kontaktirajte. Uporabniške vrste Kdedpjx D Iftsfx Adkji Struženje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 211 h, Allgemeine Daten Maße Breite: 610 mm Maße Tiefe: 650 mm Maße Höhe: 1200 mm Zusätzliche Ausstattung Inertgas-Steuerungssystem: Ja Kdedpox D Ehrefx Adkoi Dieser SINTERIT Lisa X wurde 2023 hergestellt. Als kompakter und effizienter Kunststoff-3D-Drucker bietet er fortschrittliche Druckeigenschaften für vielfältige Anwendungen. Ideal für kleinere bis mittelgroße Projekte, bei denen Präzision und Zuverlässigkeit gefragt sind. Nutzen Sie die Gelegenheit, diesen SINTERIT Lisa X Kunststoff-3D-Drucker zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche 3D-Druck

Leto izdelave: 2003, obratovalne ure: 78.554 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 8200 kg Glavni pogon Število osi: 2 Hitrost vretena: 3200 obr/min Moč motorja vretena: 30 kW Krmilna enota Znamka: SIEMENS Kodsx D Hh Tspfx Adkjdi Model: Sinumerik Pomiki Pomik po osi X: 305 mm Pomik po osi Z: 1140 mm Dimenzije Dolžina stroja: 4900 mm Ta stroj SPINNER JCL-75/1000-TC 82 je bil izdelan leta 2003. Gre za robusten horizontalni stružni stroj z maksimalnim premerom struženja nad ležiščem 555 mm in nad vozičkom 350 mm. Vključuje 12-pozicijski revolver z orodnim vmesnikom VDI 40 in močjo vretena 30 kW. Razmislite o priložnosti za nakup tega horizontalnega stružnega stroja SPINNER JCL-75/1000-TC 82. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Struženje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Splošni podatki Teža stroja: 18.000 kg Krmilna enota Znamka: FANUC Model: FANUC 18I TB Glavni pogon Območje vrtljajev vretena: 2.000 min⁻¹ (RPM) Moč motorja vretena: 30 kW Stožec orodja: ASA A2-11 Število osi: 2 Pomik Pomik po X-osi: 380 mm Hitri pomik po X-osi: 20 m/min Pomik po Z-osi: 760 mm Hitri pomik po Z-osi: 20 m/min Revolver Število revolverjev: 1 Dodatna oprema Nosilci za zunanjo struženje: HO10-25RL (4 kosi) Nosilci za čelno struženje: HF10-25RL (2 kosa) Kjdpfx Adjx D R R Ejkjdi Nosilci za notranje struženje: HB10-50N (4 kosi), HB10-40N (2 kosa) Redukcijske puše: BS 40-10, -12, -16, -20, -25 (2 kompleta) Opis stroja Vertikalni stružni stroj DOOSAN V740T je bil izdelan leta 2005. Odlikuje ga maksimalni premer zamaha 800 mm, premer struženja 740 mm ter dolžina struženja 760 mm. Glavno vreteno omogoča do 2.000 min⁻¹ (RPM) z močjo motorja 30 kW. Revolver z 12 pozicijami in hitri pomiki osi X in Z do 20 m/min omogočajo učinkovito delo. Če iščete visokokakovostne zmogljivosti struženja, razmislite o nakupu stroja DOOSAN V740T, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Področja uporabe Struženje

Stanje: novo, Širina pločevine: 1600 mm Debelina pločevine: 6 mm Upogib: 4 mm Premer zgornjega valja: 140 mm Premer spodnjega valja: 140 mm Premer stranskega valja: 120 mm Minimalni premer upogiba: Ø zgornjega valja x 3 Skupna potrebna moč: 3 kW Teža stroja ca. 2.000 kg Ksdpfoyv N E Uox Adkedi Mere stroja: 3700x1300x1280 mm Dodatna oprema: - Naprava za stožčasto upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Jeklena konstrukcija stroja - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Kalibracija

Stanje: novo, Delovna dolžina 2050 mm Predupogib 2,0 mm Najv. debelina žice pri upogibanju 3,0 mm Spodnji valj 110 mm min. premer upogibanja 165 mm Moč motorja 22 kW Hitrost upogibanja 5,2 mm/min Dolžina 3150 mm Višina 1150 mm Širina 850 mm Standardna oprema: Kdedpfx Aeyv N Dwjdkji -Ohišje stroja iz litega železa -Elektromotorni pogon upogibanja -Ročna dvig/spust zadnjega valja z ročnim kolesom -Glavni motor z zavoro -Zgornji valj z možnostjo odpiranja na stran -Stožčasta upogibalna naprava -Premična upravljalna plošča in nožni pedal ločena od stroja -CE skladnost Izbirna oprema: -Indukcijsko kaljeni valji -Dvig/spust zadnjega valja preko elektromotorja -Digitalni prikaz za zadnji valj

Stanje: novo, Premer osi: 40 mm Število vrtljajev osi: 8,5 obr/min Posuvna pot: 120 mm Premer valjev: 152 / 162 mm Moč motorja: 1,1 kW Priključna napetost: 400 V Kdjdpfxsyv N A Te Adkei Teža: 395 kg Dimenzije stroja: 900x600x1100 mm Oprema/Dodatki: - Dva pogonska valja - Ročno pomikanje zgornjega valja - Delovni položaj horizontalno in vertikalno - Ležaji osi s stožčastimi valjčnimi ležaji - Uporaba izmenljivih drsnih vodil na vodilnem vozičku - Standardni komplet valjev je vključen. Uporablja se lahko za upogibanje različnih profilov.

Stanje: novo, Dovod 95 mm Premer osi 30 mm Obrati osi 7 obr/min Premer valjev 132 mm Pogon 0,75 kW Kjdsyv N A Hepfx Adkjdi Teža 220 kg Dimenzije D-Š-V 530x900x660 mm Oprema/Dodatki: - Dva gnana valja z rebrasto površino - Ročni dovod zgornjega valja - Delovni položaj horizontalno in vertikalno (s preklopnim podstavkom) - Ležaji osi so stožčasti valjčni ležaji - Uporaba zamenljivih drsnih vodil na vodilnem vozičku - Standardni komplet valjev je priložen. Uporablja se za upogibanje različnih profilov, npr. ploščato železo, T-profil, polno gradivo itn.

Stanje: novo, Maks. prebijalna sila 45 t Število hodov 24 hod./min Maks. premer luknje v debelini pločevine Ø 27 pri 13 mm Kotna jekla 90° 80x80x8 mm Kotna jekla 45° 60x60x6 mm Ploščato jeklo 300x10/200x13 mm Izsekovalna naprava v pločevini do 7 mm Moč motorja 2,2 kW Dimenzije D-Š-V 1550x820x1540 mm Teža 760 kg Standardna oprema: - celoten komplet nožev za škarje za ploščato jeklo Kdedpfx Adsyv N Ayeksi - celoten komplet nožev za škarje za kotno jeklo - popolna standardna prebijalna naprava - hitro vpenjalna naprava za prebijalce do Ø 27 mm - kompletna pravokotna izsekovalna naprava z vpenjalcem - izsekovalna miza - podporna miza za prebijalno napravo

Stanje: novo, Polni material - premer Ø 35 mm I-jeklo - ploščato 60x10 mm Kotnik 50 mm Maksimalni premer cevi Ø 60x2 mm Kvadratni material 45x45x3 mm Premer valja - zgoraj 162 mm Premer valja - spodaj 152 mm Premer gredi 50/40 mm Hitrost vrtenja 3,3 m/min Skupna potrebna moč 1,5 + 0,75 kW Teža 450 kg Dimenzije D-Š-V 1050x950x1450 mm Oprema: - kaljene specialne jeklene gredi - 1 komplet standardnih valjev - 3 pogonski valji - zgornji valj nastavljiv hidravlično gor in dol - ločena nadzorna plošča - ročno nastavljive stranske usmerjevalne valje v eno smer - ročno mazanje Kdedsyv N Aajpfx Adkei - horizontalno in vertikalno delovanje - motor z zavornim mehanizmom Posebna oprema: - digitalni prikazovalnik