Obdelovalni center

MORBIDELLI AUTHOR X5

Stanje: rabljeno, številka stroja/vozila: 008340, Delovno območje os X: 4400 mm Delovno območje os Y: 1300 mm Delovna miza: S podstavki z vakuumskimi konzolami Moč glavnega vretena: 11 kW Število krmiljenih osi: 5 osi Hjdsy Nkpnopfx Al Tsfi Število vrtalnih vreten: 36 Število mest za orodje: 30

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Hfsdpfx Aljx D H Hco Toi Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: rabljeno, številka stroja/vozila: 008481, Delovno območje os X: 6360 mm Delovno območje os Y: 1680 mm Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 11 kW Število krmiljenih osi: 5 osi Hfodpfxey Edpmo Al Tsi Število vrtalnih vreten: 23 Število mest za orodje: 36

Stanje: rabljeno, Leto izdelave: 2011, Delovno območje X-Y: 4.422 x 1.753 mm, hodi X-Y: 4.955 x 1.918 mm, dolžina teka osi Z: Z = 400 mm, 5-osno rezkalno vreteno MORBIDELLI, rotacija osi C: 650°, nagib osi B: 290° (-10°), moč: 11 kW pri 20.000 1/min, nastavljivo preko inverterja, tekočinsko hlajenje, vmesnik HSK 63F, transportni trak za ostružke, avtomatsko CNC centralno mazanje, izmenjevalec orodja RAPID 24 (24 mest za orodja), razširjena vrtalna glava s 30 + 6 vreteni, 8 pozicionirnih pripomočkov, 2 križna laserja, vakuumska črpalka 250 m³/h, PC krmiljenje z Windows Office, teža cca 5.000 kg. Lokacija zaloge: stranka. Hfedpfjy D Rv Dex Al Tei

Stanje: dober (rabljeno), Leto izdelave: 2020, Masterwood Project 351 L 3-osiowy CNC Opis Chłodzony powietrzem 3-osiowy elektrowrzeciono frezujące 17,5 KM (HSK-63F) Przemiennik częstotliwości umożliwiający programowanie prędkości obrotowej 1.500–24.000 obr./min Zmieniacz narzędzi na 22 pozycje 6 pneumatycznych, wpuszczanych prowadnic paneli do załadunku/pozycjonowania ciężkich elementów Przygotowane do montażu docisków 2 poziome dociski do drewna klejonego warstwowo 6 punktów bazowych wzdłuż osi X (pozycjonowanie paneli przy tylnej krawędzi podpór) 8 punktów bazowych wzdłuż osi X (pozycjonowanie paneli w połowie długości podpór) Pełne odniesienie po prawej stronie wzdłuż osi Y Pełne odniesienie po lewej stronie wzdłuż osi Y 2 pola robocze 1 x pompa próżniowa 100 m³ 24 przyssawki próżniowe Pilot radiowy z cyfrowym wyświetlaczem Automatyczny system pomiaru narzędzi Taśmociąg do transportu odpadów Agregat wiertarski z 19 wrzecionami (rozstaw 32 mm) 2,2 kW - 7 pionowych wrzecion w kierunku X - 6 pionowych wrzecion w kierunku Y - 4 poziome wrzeciona w kierunku Y - 2 poziome wrzeciona w kierunku X (wszystkie wrzeciona wiertarskie programowane niezależnie) Jednostka sterująca z komputerem PC Hfsdpfxevu U Ito Al Tji Oprogramowanie SINCRO CAD/CAM MASTERWORK Dane techniczne Zakres roboczy w osi X: 5.130 mm Zakres roboczy w osi Y: 1.550 mm Prędkość w osiach X-Y: 80 m/min Prędkość w osi Z: 25 m/min Maks. grubość obrabianego elementu: 200 mm Moc silnika frezującego: 17,5 KM (S1) Obroty elektrowrzeciona frezującego: 1.500–24.000 obr./min Agregat wiertarski: 3 KM System uchwytów narzędziowych: HSK63-F Zmieniacz narzędzi: 22 pozycje Pompa próżniowa: 100 m³ Średnica króćca odpylającego: 250 mm Wydajność powietrza: 4.500 m³/h Prędkość powietrza: 30 m/s Ciśnienie robocze sprężonego powietrza: 7 bar Zużycie sprężonego powietrza: 300–500 l/min Wartość zabezpieczenia: 40 A Waga: 7.000 kg (Wszelkie zmiany, błędy w danych technicznych, informacjach i cenach zastrzeżone. Dostępność może ulec zmianie. Bez gwarancji na dane drukowane!) Najlepsze maszyny do obróbki drewna z Holandii

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: AL 00 - 647, Funkcionalnost: popolnoma funkcionalen, 5-osni CNC obdelovalni center Programska oprema: SCM Xilog Plus Hfsdpfx Aljyyb N Tj Toi Upravljalni program: SCM Panel-Mac X = 3470 mm Y = 1240 mm Z = 180 mm 6 prečk 6 pomagal za nalaganje Zadnja in srednja vrsta omejilnikov Vakuumska črpalka 90 m³/h Pozicioniranje priseskov z laserskim križem Revolverski menjalec z 12 orodji 5-osni rezkar 360° 11 kW 20.000 rpm Vpenjanje orodja HSK 63-F Ročna upravljalna enota Vrtalna glava X = 7 Y = 5 X vodoravno 2 x 2 Y vodoravno 1 x 2 Rezilo za utore s 5-osnim rezkarjem Zaščitna naprava "Bumper" Centralno mazanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 3.460 mm, pomik osi Y: 1.615 mm, pomik po osi Z: 400 mm, število osi: 5, skupna masa: 3.500 kg, moč vretenovega motorja: 11.000 W, največja hitrost vretena: 20.000 obr/min, This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working area of 3050 mm in the X-direction, 1348 mm in the Y-direction, and 400 mm in the Z-direction. The machine is equipped with a powerful 11 kW spindle and a tool changer with 12 positions. If you are looking for a high-quality CNC woodworking machine, you should consider the MORBIDELLI Author X5 we are offering for sale. Contact us for further details. • Voltage: 400 V • Frequency: 50 Hz • Current: 48 A • Power supply: 400 V, 50/60 Hz • Power consumption: 28 kVA • Working area: X 3050 mm, Y 1348 mm, Z 400 mm • Travel speeds: X 50 m/min, Y 45 m/min, Z 22 m/min • Drive system: Ball screw drive in X/Y/Z axes • Pendulum processing: yes • Spindle: 5-axis Morbidelli milling spindle • C-axis rotation: 640 degrees • B-axis rotation: +/- 100 degrees • Inverter power: 18 kW • Tool holder: HSK 63F • Minimum distance table to spindle: 40 mm • Tool changer: rear tool magazine on the X-axis • Number of tool changer positions: 12 • Maximum tool diameter: 240 mm • Maximum tool length: 220 mm • Max. tool weight: 8 kg • Worktable: vacuum clamping system • Vacuum pressure: 3000 Pascal • Control system: NUM 1040 • Operating system: Windows XP Professional • Processor: 32-bit Pentium • RAM: minimum 256 MB • Hard disk: minimum 2 GB • Screen: 17 inch • Interface: RS232 • Air pressure: 6 to 8 bar • Air consumption: 250 NL/min • Extraction connection: 250 mm • Extraction air speed: 30 m/s • Machine dimensions: approx. 5300 x 2200 x 2500 mm • Required space: approx. 6300 x 4000 x 3000 mm • Safety equipment: CE-compliant protective system • Central lubrication: automatic • Drilling head: 12 + 6 spindles • Vertical spindles (Y-direction): 5 • Vertical spindles (X-direction): 8 • Horizontal spindles (X-direction): 4 • Horizontal spindles (Y-direction): 2 • Vertical spindle pitch: 32 mm • Horizontal spindle pitch: 64 mm • Drilling speed: 4000 rpm • Drilling unit power: 2.2 kW Hfedpfx Ajy Ndn Rol Tji • Drill holder: M10 • Pneumatic stroke: 60 mm Additional equipment • Chip conveyor (included) • Vacuum pump 250 m³/h

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane Hfodpfxsvvi Rfo Al Tji - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.400 mm, pomik osi Y: 1.300 mm, hitrost pomika os X: 40 m/min, hitrost podajanja osi Y: 45 m/min, Oprema: CE označba, The machine has the following configuration: Drilling Groups: Upper group with 30 vertical and 6 horizontal spindles Milling Group 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling Group 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool Magazine 1: 24 positions, located at the rear of the machine Tool Magazine 2: 6 positions, located on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece through-feed height: 400 mm Axis X travel speed: 40 m/min Axis Y travel speed: 45 m/min Axis Z travel speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Hfjdpfx Aloyzy S Nj Tei Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Support table with suction bars Number of suction bars: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial records of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8340

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: AL/009416, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.500 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 400 mm, število osi: 5, Oprema: CE označba, CENTRO DI LAVORO A 5 ASSI MORBIDELLI MOD. AUTHOR X5.55 EVO – CONFORME ALLE NORME CE - Dimensioni di lavoro: X 5500 mm Y 1700 mm Z 400 mm - Tappetino per trasporto trucioli - Lubrificazione centralizzata automatica - Sistema di aspirazione ottimizzata e centralizzata - Unità di fresatura a 5 assi 11KW (15 HP) HSK-63 PRISMA Hfjdpfxsywd Ado Al Tei - Mandrino raffreddato a liquido - Unità di foratura con 18 mandrini verticali e 6 orizzontali - Piano TV-MORBIDELLI con 10 supporti da L=1500 - Dispositivo laser per posizionamento ventose - Lama diametro 300 mm - Nr. 2 battute laterali centrali supplementari - Nr. 2 battute laterali supplementari - Nr. 30 ventose - Magazzino utensili con 12 posizioni - Pompa del vuoto Becker da 250 M3 (anno 2022) - Controllo numerico NUM - Nr. 10 dispositivi di sollevamento per aiuto carico - Volt. 400/50 - Matricola AL/009416 - Anno 2009

Stanje: rabljeno, Leto izdelave: 2014, - Machine available from: 2026-03-30 - Year of manufacture: 2014 - Documentation available: Yes - CE certificate available: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs]: 5 - Type of router table: Beam table - Tool holding system: HSK-F63 - Drilling tool included: Yes - Tool changer positions [pcs]: 12 Hfodpox Hwhxefx Al Tji - System/Software: SCM Maestro - Safety features: Safety light curtain, safety fence - Vacuum pump included: Yes - └ Quantity [pcs]: 1 - └ Brand: Becker - └ Model: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum [bar]: 200 - CNC options: Handheld control - CNC documentation available: USB stick - Working area X [mm]: 5200 - Working area Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 Financial Information: VAT: The indicated price is net of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets