Proizvodnja mleka in mlečnih izdelkov

MILKPLAN MPP-5000

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), An unused and still originally packaged continuous pasteurizer from Pietribiasi Michelangelo Srl is available. Throughput capacity for milk: 1,500 l/h; throughput capacity for cream (max. 40% fat): 750 l/h. Inlet temperature: 6°C. Pasteurization at 68/74/88°C. Outlet temperature: 6°C. Capacity of balance/feed tank: 100 l. Includes centrifugal pump for product and CIP, additional section and hot water module. Robust plate heat exchanger in AISI 304, special Sondex plates from Denmark in AISI 316, plate surface area: 0.08 m², flow volume per plate: 0.21 dm³. Special snap-on nitrile gaskets (glue-free), hydraulic test pressure: 8.0 bar, test temperature: 110°C. Heat recovery: 85%. Temperature profile: 6–68/74/88–6/33/45°C across 4 sections. Final heating for cheese/yogurt outlet: 33/45°C. Media: approx. 3,000+3,000 l/h hot water at 92°C, approx. 3,000 l/h chilled water at 2°C. Holding time: 15 s. Design in stainless steel AISI 304. Product recirculation to the feed tank via pneumatic divert valve as soon as the pasteurization temperature drops approx. 2°C below setpoint. Two hot water generators for pasteurization and final heating with closed circuit, assembly for automatic water dosing, automatic hot water supply unit, expansion vessel, pump, brazed plate heat exchanger. Documentation available. On-site inspection possible. Gsdpfx Asyln D Tjc Hokb

Stanje: dober (rabljeno), H.Biaugeaud A404 HB Rendeuse à fromage En acier inoxydable, utilisée précédemment pour râper du fromage, deux accessoires de râpage, mobile, triphasé. Gsdsvcdl Repfx Ac Hokb

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) Gkedpfx Acjgwbbqe Heb No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Alfa Laval CHPX510SGD-35CGRX – celoten sistem separatorja, vključno z: Motorjem Sistemom ventilov Krmilno omarico Omara za zaganjalnik Črpalko za trdne snovi Ciklonom Rezervoarjem za usedline Godpfx Aeucct Iec Hskb Nosilno ploščo Nogicami za dušenje vibracij Orodji za čiščenje posode Kompresijskim orodjem Sistemom inertnega plina Dokumentacijo Pred tem je bil sistem uporabljen pri Alfa Lavalu za usposabljanje.

Stanje: rabljeno, Leto izdelave: 2010, številka stroja/vozila: AT91, Used CIP Tetra Pak Year 2010 15T/h The used CIP Tetra Pak, year of manufacture 2010, with a capacity of 15T/h, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning process in bottling and food processing facilities. As such, this system ensures an effective hygiene cycle without requiring dismantling of the production line, thereby optimizing downtime and reducing both water and cleaning agent consumption. Tetra Pak built the used CIP system in 2010 with a throughput of 15 tons per hour. Its operational capacity of 15 tons per hour makes it suitable for highly productive plants while ensuring hygiene standards compliant with food and beverage industry regulations. Gsdpfx Aewga Iusc Hekb Technical Features of the Used CIP Tetra Pak 2010 15T/h The Tetra Alcip 1 applies a controlled wash cycle to remove organic and inorganic residues from production circuits. The system includes separate tanks for water, alkaline cleaner, and acid, and automatically regulates temperature, chemical concentration, and wash time according to the requirements of the facility. This enhances the efficiency of cleaning operations. Moreover, the used CIP Tetra Pak 2010 15T/h automates the cleaning process, reduces the risk of cross-contamination, and improves production efficiency. The system also allows operators to configure various wash parameters, enabling adaptation to specific production requirements and ensuring thorough cleaning of filling lines, pipelines, and heat exchangers. Safety and Process Control The system features advanced safety functions, such as: - Sensors for continuous monitoring of cleaning agent concentrations. - Temperature and pressure controls throughout the cleaning cycle to ensure optimal performance. - Alarm systems that detect and manage process anomalies, thus preventing potential failures. These features ensure the reliable operation of this used CIP system, minimize operational errors, and optimize the consumption of water and chemicals. Automated system monitoring also increases safety while reducing maintenance requirements. Operational Advantages Using this used CIP Tetra Pak enhances plant productivity in several ways. Firstly, it reduces downtime: the continuous wash system completes fast cleaning cycles without needing to dismantle components. Additionally, it optimizes resource use: the automatic detergent dosing system prevents chemical wastage. Furthermore, it ensures regulatory compliance: the system meets high hygiene standards and fulfills industry regulations. At the same time, the automated nature of this system helps manufacturers streamline their cleaning procedures. As a result, companies benefit from improved production continuity and lower operating costs. Likewise, the option to configure cleaning...

Leto izdelave: 2016, stanje: dober (rabljeno), Genstand: M-3525-APV-Pumpe-W+65/350-235 STD Gksdpfx Acskt Upne Heb APV centrifugalpumpe i rustfrit stål Type: W+65/350-235 STD Årgang: 2016 2 stk. identiske! Brugt!

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: LC560, Used processing plant for small dairy products, 2,000 l/h Milk Reception and Initial Storage The used processing line for small dairy products (2,000 L/h) starts with a milk intake unit consisting of two Lactofreeze tanks and a feed pump. Initially, operators transfer the raw milk into the tanks, where it remains chilled. This setup ensures thermal stability prior to processing. Additionally, this configuration minimizes microbial contamination while allowing a seamless transfer to the pasteurization stage. Pasteurization and Separation A plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour, is used for pasteurization. Specifically, the pasteurizer rapidly heats the milk and holds it at a predefined temperature to eliminate pathogens. Afterwards, the GEA WESTFALIA separator with a capacity of 3,000 l/h takes over the cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces the size of fat globules, thereby enhancing emulsion stability and preventing cream separation. Fermentation and Coagulation After heat treatment, the milk proceeds to fermentation. Here, an insulated double-walled fermentation tank with a 1,000-liter capacity and planetary agitator is used. This ensures uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation tank equipped with a planetary mixer initiates the coagulation process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Gkodpfx Acow Ahg Rj Heb Cheese Processing and Whey Separation Following coagulation, the used processing line for small dairy products (2,000 L/h) continues with cheese processing. The system consists of a 500-liter container with a drainage sieve and two curd drainage vats. Operators can therefore efficiently process large quantities of curd. Furthermore, these components simplify whey separation while ensuring compliance with hygiene standards. Their design also allows for easy cleaning and minimizes cross-contamination. Packaging Operations Once products are ready for packaging, the line integrates semi-automatic and automatic solutions. Initially, a semi-automatic filler doses pasteurized milk into 1-liter pouches. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. The ETICAP (2004) rotary labelling machine applies both front and back self-adhesive labels to cylindrical cups, securing consistent label alignment and adhesion. Date Coding, Temperature Control, and Final Packaging In addition, a Videojet 1220 coder (2019) applies expiry dates to each product via conveyor. Further downstream, a vacuum packaging machine handles fresh and cheese portions. Thermal utilities include a solid fuel boiler with 115 to 150 kW output (2014) and dual transfer pumps. An ice water tank (5,000 L, 2014) and a chiller (2018) maintain constant temperatures across the entire processing line.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Plate Heat Exchanger APV H17 7.41 L 4.8 m³ 800 kW Gedpfxewx Hz Se Ac Hskb APV H17 MGJ Plate Heat Exchanger /ct2227/ Manufacturer: APV Model: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer area: 4.08 m² Nominal power: 800 kW Width: 340 mm Height: 1050 mm Connection height: 137 mm Depth: 60 cm Pipe connection: DN50, EN 1092 Capacity: Primary: 7.41 liters Secondary: 6.86 liters Max. pressure: 10 bar Test pressure: 15.53 bar Max. temperature: 110 °C Pipe connections made of stainless steel.

Stanje: pripravljen za uporabo (rabljen), Na voljo je odprt bakren sirarski kotel z majhno izgubo in planetarnim mešalnikom, vključno z rezalnimi harfami in lopatami. Oblika: okrogla, material roba: jeklo, notranji premer: 2600 mm, uporabna prostornina: 7000 l, zunanji premer: 2850 mm, višina: 2950 mm. Oblika sira: 2x4, dolžina modela: 820 mm, dolžina nosilca: 4400 mm, dolžina sirotkine kadi: 4400 mm, skupna dolžina: 5000 mm, širina: 1500 mm, globina: 900 mm. Možen je ogled na lokaciji. Baker je bil le nežno opran. Gksdpfox Db Uujx Ac Hob

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flow Meter, Pasteurizer A complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with premium pumps, valves, flow meters, and control cabinets. The line is engineered for hygienic and efficient cream pasteurization processes in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Includes various valves and a stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 units) High-quality single seat valves for food applications 4. Flow Meter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm Precise flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, compatible with CIP operations 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Gsdpfx Ajxtu Ugoc Hekb Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Operating Parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system for stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 units) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm The Alfa Laval / Tetra Pak cream pasteurization line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygienic standards, precise process parameter control, and maximum reliability. Ideal for dairy plants, cream, and milk fat producers.