Vertikalni obdelovalni center CNC

MIKRON UMS 600

Stanje: rabljeno, Leto izdelave: 1995, Technical details: X-travel: 600 mm Y-travel: 500 mm Z-travel: 450 mm Tsdpfx Ajw D Hhpjgpsf Machine weight approx.: 3.5 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Available directly from toolmaking department Vertical Machining Center Make: DMG Model: DMC 104 V Linear Tedpfx Agst I Di Aepsf Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm Travel X-axis: 1000 mm Travel Y-axis: 600 mm Travel Z-axis: 500 mm Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 stations Equipment: • Linear drive in X-axis • Bed flushing • Spiral chip conveyor • Direct position measuring system • Drill breakage control via laser • Z-axis temperature compensation via sensor incl. active cooling unit • Internal coolant supply through the spindle • External air blast via 2 pipes • Coolant system 700 liters, paper band filtration system with high-pressure unit 40 bar • Visiport viewing window on operator door • Additional machine door on left side • Bader cooling unit on control cabinet • Prepared for connection of a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with seal air 0.5 bar

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5.47.07.02, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, največja hitrost vrtenja: 6.300 obr/min, število mest v zalogovniku orodij: 44, TECHNICAL DETAILS Drive Power (at 44% duty cycle): 9 kW Drive Power (at 100% duty cycle): 6 kW Max. Torque: 52 Nm Machining Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% duty cycle: 800 Nm Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Interface / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Mode Longitudinal Spindle Feed (X Axis): 600 mm Traverse Spindle Slide (Y Axis): 500 mm Vertical Spindle Slide Travel (Z Axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y Axis: 0 – 15,000 mm/min Programmable Feed Rate Z Axis: 0 – 12,000 mm/min Rapid Traverse Rate X/Y Axis: 15,000 mm/min Rapid Traverse Rate Z Axis: 12,000 mm/min Tjdpfx Ajwm I N Hjgpof Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-Slots: 4 T-Slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Stations: 2 × 22 Tool Diameter: 80 / 130 mm Max. Tool Length: 350 mm Max. Tool Weight: 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20–25 s Tool Change Time: 12–16 s MACHINE DETAILS Total Weight with Safety Enclosure: 3,000 kg Total Weight with Roof Enclosure: 3,100 kg Ambient Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Rated Power: 15.8 kW Utilization and Connection Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Stanje: rabljeno, Leto izdelave: 1997, Krmiljenje Heidenhain 355 Todod N Smhepfx Agpjf X-hod 850 mm Y-hod 550 mm Z-hod 450 mm Vpenjalo orodja SK50 Teža stroja cca 5,5 t +++++ Upoštevajte, da je stroj v razstavljenem in za nakladanje pripravljenem stanju. Zaradi tega demonstracija pod napetostjo ali izdelava videa nista možni. Naš oglas vsebuje najbolj reprezentativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Leto izdelave: 2012, Stanje: dober (rabljeno), Machine has 5,600 total spindle hours Datron D 5 Dental - Milling Machine, Year of manufacture: 2012, 5-axis simultaneous machining, Control: PC - Beckhoff, Automation / 8 blanks, Milling spindle: 1.8 kW, Spindle speed up to 50,000 rpm, Tool holder: HSK C 25, 15-position automatic tool changer, Tsdpfjwvqh Dex Agpof Rotary/swivel axis, A-axis: +/- 25°, B-axis: +/- 45°,

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. Tsdpfx Ajd Ixbzsgpef The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Stanje: kot nova (razstavni stroj), Generator set in insulated container The unit is in absolutely brand-new condition (104 operating hours). Tedpsiw Ed Hjfx Agpef A Krampitz tank is installed inside the container and is filled with 500 liters of diesel fuel. Engine: IVECO Generator: STAMFORD Continuous power output: 20 kVA / 16 kW Frequency: 50 Hz Rated current: 28 A Voltage: 400V / 231V Speed: 1500 rpm Weight: approx. 4000 kg SÄBU container / Dimensions: 4.00 m long, 2.60 m wide, 3.05 m high - Control panel - Ventilation system for fresh air and exhaust - 700 liter tank - Sound- and heat-insulated container Loading and transport can be offered as an option. Only serious and legitimate inquiries will be answered. Please include your name, email address, and telephone number.

Stanje: novo, 2021 Durma 15 kW Fiber Laser Manufacturer: DURMA Model: HD-F(L) 3015 Working Area X-Y-Z: 3060x1530x160 mm Laser Power: 15,000 Watt IPG Control: Siemens Sinumerik 840D Sheet Thickness Mild Steel: 40 mm Sheet Thickness Stainless Steel: 30 mm Sheet Thickness Aluminium: 30 mm Sheet Size: 3048x1524 mm Loading Capacity: 200 kg/m² X-Y Axis Speed: 100 m/min Simultaneous X-Y Axis Speed: 280 m/min Positioning Accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Installation Space (LxWxH): approx. 14,500x7,500x2,420 mm Weight: approx. 12,000 kg Tsdsgk Nlpopfx Agpef Standard Equipment - Automatic pallet changer - Sinumerik 840D control - Auto-focus cutting head Precitec Procutter F150 focus - Automatic sheet position and size measurement system - Automatic nozzle cleaning - Positioning laser diode - Central lubrication - User-friendly parameter interface (power–speed–pressure) - External CAD/CAM programming software with automatic nesting, optionally Lantek software - Work area lighting - Warning light - Multi-chamber extraction system - Special laser cutting options - Remote maintenance - CE certification - IPG fiber laser source 15,000 Watt including chiller Optional Equipment Available: - Filter, compact extraction unit Vanterm - Motorised chip conveyor for small parts/scrap - Laser service kit - Cloud licence - Lantek Expert Inside software - Lantek software with positioning laser diode and automatic sheet layer detection, measurement - Integrated camera - Linear drive Further information available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Vacuum tempering furnace Manufacturer: BMI Year of manufacture: 2001 Maximum temperature: 750°C Year of manufacture: 2001 Batch size: L x W x H 1200 x 600 x 600 mm Tsdpfsvcyf Tsx Agpef Heating type: Electric Heating power: 100 kW

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Tool holder: SK 40 Travel distances: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Maximum tool weight: 260 kg Tedpfx Aet Hr Ahegpjf Spindle speed: 12,000 rpm Maximum table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)