Stroj za erodiranje žice

Charmilles Robofil 310

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.000 kg, potovalna razdalja osi X: 400 mm, pomik osi Y: 250 mm, pomik po osi Z: 400 mm, skupna višina: 2.230 mm, skupna dolžina: 1.800 mm, skupna širina: 1.600 mm, višina obdelovanca (maks.): 400 mm, širina obdelovanca (maks.): 500 mm, dolžina obdelovanca (maks.): 850 mm, skupna masa: 2.500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection in X/Y/U/V/Z Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg Rsdpfjw Hxqnjx Ag Top The machine was in operation with our customer until recently and is available immediately.

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Rjdpfxsvy Ihdj Ag Tsp Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: dober (rabljeno), Leto izdelave: 2003, Manufacturer: KUKA Rodpfsh Dw Dqox Ag Tep Model: KR 210 L 180 Year of manufacture: 2003 Maximum load capacity: 150 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, nazivna (navidezna) moč: 10 kVA, skupna masa: 6.500 kg, največja hitrost vretena: 20.000 obr/min, Heidenhain TNC530, delilnik – 4. os vreteno 20.000 vrt./min, HSK 63 miza 850 x 530 mm Redpsw Dc Irjfx Ag Tep hodi 600 x 450 x 450 mm menjalec 30 orodij teža 6500 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, x-pomik 600 mm y-pomik 450 mm z-pomik 400 mm Krmiljenje Heidenhain 430 ITNC Vpenjalo orodja SK 40 Obratovalna napetost 400 V Krmilna napetost 24 V Teža stroja ca. 6 t - Obratovalne ure: 48.690 - Maks. obremenitev mize: 1.000 kg - Teža stroja: 6.000 kg - Vključno z nosilci orodij – SK40 - Vključno z vsemi opisi - Vključno s programirnim priročnikom – Heidenhain Rsdpjwbi A Djfx Ag Top - Vključno z enim strojnim primežem - Vključno s pritrditvenimi kremplji

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Rjdpfx Ajph Uk Nog Tjp Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: rabljeno, Leto izdelave: 2004, Technical details: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle speed range: 63 – 3,150 rpm Stepless feed rate: 12–3000 / 6–1500 (Z) mm/min Quill stroke: 100 mm Head swiveling range: +/- 90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Redpfxok Hdu De Ag Tep Universal milling machine with linear control, mechanical handwheels, rotary tilting table +/- 45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Stanje: rabljeno, Leto izdelave: 2010, Milling Machines Travel X: 760 mm Rsdpfx Agov D U Apo Tjp Travel Y: 510 mm Travel Z: 610 mm HSC Machine Number of Axes: 3 Milling Machine / Machining Centre Control: Hurco WinMax Spindle Taper: SK - A40 Spindle Speed: 12,000 rpm Table Size X: 1,020 mm Table Size Y: 508 mm Max. Workpiece Weight: 1,350 kg Tool Changer: 24-position Drive Power: 13.5 kW Torque: 214 Nm Rapid Traverse: 35 m/min Spindle Cooling Chip Conveyor

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Rodpfjvx Uvfsx Ag Tsp Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).

Stanje: rabljeno, Leto izdelave: 2013, Technical Specifications: X-axis travel: 760 mm y-axis travel: 460 mm z-axis travel: 460 mm Control: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 - 95 Nm Spindle taper: SK40 Tool magazine with: 24 positions Table size: 900 x 410 mm Max. table load: 350 kg Redpfxjvhbpds Ag Top Feed range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 V DC Compressed air connection: 6 / 8 bar Total power requirement: 20 kVA Machine weight approx.: 6.0 t Dimensions of coolant system: 1.7 x 0.7 x 1.35 m Approx. machine dimensions (LxWxH): 1.9 x 2.3 x 2.45 m TNC 620 (Contour control with up to 5 controlled axes, especially suitable for universal milling), can be integrated into network Safety doors with shatterproof plastic windows Chip conveyor Hydraulic unit Coolant filtration unit Rittal chiller on control cabinet Work area interior lighting Handheld control unit