Tračna žaga MEP Shark 332 nc 5.0

MEP SHARK 332 NC 5.0

Stanje: novo, Saw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 - 100 m/min Vice width: 335 mm Cutting capacity at 90° (round): 300 mm Cutting capacity at 90° (square): 260 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 45° (round): 260 / 200 mm Cutting capacity at 45° (square): 250 / 180 mm Cutting capacity at 45° (flat): 270 x 200 / 200 x 160 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (square): 170 mm Cutting capacity at 60° (flat): 170 x 170 mm Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Ledpfx Afjyv Nylogsri Electro-hydraulic, fully automatic bandsaw with multi-microprocessor control, featuring additional semi-automatic, semi-automatic dynamic, and manual operating modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic machine with two controlled axes, allowing programming of 1000 different cutting programs—each with its own cut length and quantity—using the same material thickness. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual downfeed of the saw bow to the desired position, with cycle start via hand button) - Manual or semi-automatic dynamic cycle for direct cuts without programming. Key features: - New fieldbus communication system (Modbus protocol) - Display, 20 characters x 4 lines, showing technical parameters such as: - Saw blade speed - Number of programmed and completed cuts - Saw blade thickness - Feed length - Cutting time - Ammeter - Blade tension - Display of up to 100 diagnostic messages and warnings, all in the respective user language. - Display and logging of alarm and error messages with incident history display feature. - Automatic parameter adjustment via control system when a new driver or inverter is installed. - Electronic inverter for continuous regulation of blade speed from 15 to 100 m/min. - Latest-generation hydraulic control unit, highly efficient and low in energy consumption. - New 600 mm material feed system with stepper motor and ball screw mounted on opposed bearings. - Programmable saw bow stroke from control panel for adaptation to the material being cut. - Electronic blade tension monitoring. - Automatic cutting load monitoring via a servo valve mounted directly on the cylinder. - Coolant tray (with two electric pumps for blade lubrication/cooling) integrated in the machine base. - Chip drawer (can be replaced by a swarf conveyor – see optional accessories) - Prepared for installation of a minimum lubrication system for the saw blade (optional), in addition to standard emulsified oil lubrication. - Chip removal brush. - Machine designed for pallet truck transport. - Bi-metal bandsaw blade for solid and profile material.

Stanje: novo, Hydraulic Punching and Shearing Machine SAHINLER HKM 65 Applied force: 65 tons. Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Lrodpfx Afjggbuhegoi Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Material support height 600 mm Feed min/max 50,000 mm Vise opening 335 mm Blade speed 15 - 100 m/min Automatic feed 600 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1,105 kg Dimensions (L x W x H) 3.3 x 2.83 x 2.23 m Ledpfx Asxab S Eofgeri electro-hydraulic fully automatic band saw, additionally equipped with: * semi-automatic * semi-automatic dynamic * manual operation modes Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP - WINDOWS CNC control unit * User interface with 7” touchscreen display * Mechanical keys for machine operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivel arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycles selectable * For non-programmed cutting operations - Safety enclosure for operator protection - Infinitely variable cutting speed adjustment from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * Highly efficient with low energy consumption - Material feed via stepper motor and ball screw * Mounted on counter-rotating ball bearings * Single stroke 600 mm, repeatable for any required length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display indicator * Electronic converter - Automatic monitoring of cutting force * Servo valve mounted directly on the cylinder - Coolant tray integrated into machine base - Chip removal brush - Bimetal saw blade for solid and profile materials - Tool kit and operating manual with spare parts list * Mitre accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter: 300 mm Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Cutting range at 45° (round): 260 mm Cutting range at 45° (flat): 270 x 200 mm Lrsdpfxoxabavo Afgoi Cutting range at 60° (round): 180 mm Cutting range at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vise jaw opening: 335 mm Blade speed: 15 – 100 m/min Automatic feed: 600 mm Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (LxWxH): 3.3 x 2.83 x 2.23 m Electro-hydraulic fully automatic bandsaw, including additional: * Semi-automatic * Semi-automatic-dynamic * Manual operation Description: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical buttons for saw operation functions * Ensures reliable operation, easy and intuitive to use * Real-time monitoring of all cutting parameters * Pivoting arm allows for convenient and safe operation * Display and logging of alarms and error messages - Mitre cuts in automatic cycle from 0° to 60° on the left - Semi-automatic, semi-automatic-dynamic, and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * For performing cuts without programming - Safety enclosure for operator protection - Infinitely variable cutting speed from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * High performance with low energy consumption - Material feed via stepper motor and ball screw spindle * Mounted on opposite ball bearings * Single stroke of 600 mm, repeatable for any length - Positioning of saw head and feeder movement via joystick - Automatic detection of cut start position - Manual blade tension control with display feedback * Via electronic converter - Automatic monitoring of cutting load * Through servo valve mounted directly on the cylinder - Coolant tray integrated in machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating manual with spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Na voljo je rotacijski upogibni stroj Schechtl za obdelavo pločevine. Delovna dolžina: 2040 mm, višina odprtine: 140 mm, zmogljivost upogibanja: 3 mm, hitrost upogibanja: 50°/s, zadnji prislon: 750 mm. Dimenzije stroja D/Š/V: pribl. 3000mm/750mm/1250mm, teža: pribl. 2750kg. Ogled na lokaciji je mogoč. Lodpfx Ajx Hz Ntsfgeri

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Ljdpfx Aefg E H Ejfgsri Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, For sale is a used, fully functional semi-automatic mitre band saw machine. Cutting capacities: 0° 330 mm 320 mm 450 x 320 mm +45° 320 mm 300 mm 300 x 300 mm +60° 210 mm 200 mm 200 x 200 mm -45° 320 mm 300 mm 300 x 300 mm -60° 210 mm 200 mm 200 x 200 mm Maximum vice opening: 455 mm Blade dimensions: 4500 x 34 x 1.1 mm Saw blade motor power: 4.0 kW – three-phase Blade speed: 15 – 100 m/min Accessories: 4.5 m roller conveyor, various saw blades Lrjdpfx Aewigavjfgji

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Model: Amada HFE M2 220t 4m, 8-osna hidravlična upogibna stiskalnica Letnik: 2012 Tonska moč: 220 ton Največja dolžina upogiba: 4280 mm Dolžina hoda: 200 mm Hitrost približevanja: 1 – 100 mm/s Hitrost upogibanja: 1 – 10 mm/s Hitrost vračanja: 1 – 100 mm/s Kapaciteta olja: 195 l Moč motorja: Teža: 17.450 kg Dimenzije: Dolžina stroja: 5070 mm Globina stroja: 2075 mm Višina stroja: 3085 mm Lsdjv S U Izepfx Afgeri Razdalja med stranskima okvirjema: 3760 mm Širina prečke: 180 mm Višina mize: 960 mm Odprtina (svetel odprt): 470 mm Globina grla: 420 mm

Stanje: dober (rabljeno), Leto izdelave: 2007, VRTALNI STROJ Delovno območje: V630/1000M Min. / maks. višina: 10 – 450 mm Min. / maks. širina: 60 – 1.050 mm Maks. teža pozicioniranja: 9.000 kg Število vrtalnih enot: 3x Avtomatski menjalec orodij: 3x (3x 5 pozicij) Merjenje višine: Vključeno Merjenje širine: Vključeno Teža stroja: 12.000 kg Merilni sistem z valji za pomik Maks. hitrost: 42 m/min Min. dovodna dolžina: 1.500 mm Vrtalna enota: VD40 Pomik in pozicioniranje: servo-motorji s servo-invertorji Obrati vretena: brezstopenjsko 100 – 2.500 min⁻¹ (servo-motorji) Mazanje: notranje z meglo zraka / olja Vpenjalni stožec: SK 40 Premer svedrov za olje-cevne svedre: 8 – 40 mm Premer svedrov za karbidne svedre: 13 – 32 mm Rezkanje navojev: M8 – M24 Možnost označevanja izvrtin: Da, na 3 straneh Lsdpfx Afovpafyogsri ŽAGA Žaga: VB1050 Kapaciteta (višina x širina) 0°: 500 x 1.130 mm Kapaciteta (višina x širina) +/- 15°: 500 x 1.060 mm Kapaciteta (višina x širina) +/- 30°: 500 x 925 mm Kapaciteta (višina x širina) +/- 45°: 500 x 725 mm Kapaciteta (višina x širina) +/- 60°: 500 x 470 mm Brezhitrostno pomikanje traku: 40 – 120 m/min Motor žaginega pogona: 7,5 kW Dimenzije žaginega traku: 9.550 x 54 x 1,6 mm Hidravlično napenjanje traku: 48.000 N Teža stroja: +/- 8.500 kg

Stanje: rabljeno,