CNC ŽAGANJE / VRTANJE LINIJA SPLIT SISTEMA

VOORTMAN V630 / VB1050

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0401-230047, The FICEP Tipo G31 sheet metal processing center is designed for the efficient machining of steel sheets and flat steel in steel construction and steel trading applications. The Ficep Tipo G31 LG is capable of drilling, center punching, thread cutting, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting flat steel or sheet metal panels in a single system, with a maximum sheet width of 3,100 mm and a maximum sheet length of 14,000 mm. This CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. The system is suitable for sheet sizes as follows: sheet width minimum 200 mm, maximum 3,100 mm; sheet length minimum 2,500 mm and maximum 14,000 mm. For plasma cutting, a powerful and modern Hypertherm HPR 400 XD plasma source is provided. Additionally, the system is equipped with an oxy-fuel cutting unit for processing thick material gauges. Dujdpfx Aforr Sqljlol The drilling unit, featuring high torque and spindle speeds up to 6,000 rpm, is designed for use with carbide tools such as solid carbide drills, Nenok Multiplex indexable insert tools, and also for applications with HSS coolant channel drills for drilling diameters from 10 mm to 40 mm. The Ficep Tipo G31 system is in excellent condition and has very few operating hours.

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Voortman V808 CNC nosilna linija za obrezovanje – leto 2016 (REF: STK‐1549) Duodpfx Ajlff H Eeflel Obrezovalni robot | Samodejni vstop in izstop materiala | 1,25 m segmenti | Valjčni podajalnik Kjellberg SmartFocus 300A plazemska enota | Donaldson sistem za odsesavanje

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 Dedoh S Nxpjpfx Afloul 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Djdpfevx E Ncex Afljul Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM Group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock

Stanje: pripravljen za uporabo (rabljen), Voortman VB1250 tračna žaga zmogljivost: 1250 x 500 mm poševni rez +/- 60°: 1000 x 500 mm poševni rez +/- 45°: 850 x 500 mm poševni rez -30°: 500 x 500 mm hitrost rezanja: 40–120 m/min moč: 7,5 kW Dimenzije tračnega lista: 11.000 x 54 x 1,6 mm Voortman V630 trojna vrtalna enota 2 horizontalni vrtalni enoti 1 vertikalna vrtalna enota vsaka enota ima avtomatski menjalnik orodja s 5 pozicijami vreteno: SK40 (hlajenje skozi vreteno) premer vrtanja: 8–40 mm hitrost vrtanja: 0–2000 vrt/min rezkanje navojev: M8–M24 merjenje višine profila vključeno centrirna oznaka vključena enota za številčno označevanje vključena 18 metrov vstopnega transportnega traku 6 prečnih transportnih trakov dolžine 4 metre največja širina: 1050 mm nosilnost: 400 kg/m maks. pozicijska masa: 9 ton Valjčni transportni merilni sistem = neomejena merilna dolžina Vacon 110 CNC upravljanje Hidravlična enota 4 kW – 160 bar Dujdpfx Aowlkwwoflol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 33.000 h,

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Dusdpfx Ashzbipeflel Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3 m/min Crab travelling speeds 20/5 m/min Dodpfxsvx E I Se Aflsul FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Multiple units immediately available from stock

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 12.000 mm, pomik osi Y: 1.800 mm, pomik po osi Z: 1.000 mm, MECOF CS 50 CNC Universell Fräsmaskin Dujdpswdm U Njfx Aflsl SELCA S3045L, Tillverkningsår 1997, Tvåaxligt huvud: C-axel 360° x A-axel 3° Bordsstorlek: 13 300 x 1 090 mm. X-axel, kolonnens längdrörelse: 12 000 mm Y-axel, huvudets vertikalrörelse: 1 800 mm Z-axel, ram 390 x 390 mm, slaglängd: 1 000 mm Bord: 13 300 x 1 090 mm Tvåaxligt huvud: C-axel 360° x A-axel 3° Spindelkon: ISO 50 Spindelvarvtal: 10–4 500 rpm Spindelmotor: 20 kW Automatiskt verktygsväxlarsystem: 41 verktygsplatser

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been fully cleaned and inspected. Dsdpfx Afjv Iamzsloul The drilling machine features a numerically controlled, longitudinally moving drilling unit (X-axis, travel 0 - 15,000 mm) with automatic tool changer system, HSK A80 holder for 6 tool positions. Thanks to the powerful 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: - Profile and flat steel support with guide rail and fixed table, total length 15 m - Mobile drilling unit for longitudinal positioning on workpieces - Horizontal drilling head with single drill spindle - Additional drill head storage in X-axis direction - Clamping device for securing material - Position detection device - Maximum profile size: 1200 x 1200 mm - Number of drill spindles: 1 - Drilling diameter: 5 - 40 mm - Thread cutting: M6 - M30 - Drill spindle speed: 180 - 3000 rpm - Holder: HSK A 80 - Tool changer: 1 x 6 For more information, please contact us.