5-osni obdelovalni center

Matec 30 HV

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, obratovalne ure: 36.111 h, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: LE 430 CA, skupna masa: 16.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 15.000 W, število osi: 4, This 4-axis CNC Matec 30 HV was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking for high-quality machining capabilities, you should consider the Matec 30 HV CNC vertical machining center we have for sale. Please contact us for further details. • Axis travels and speeds • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min Duedoyzq A Sepfx Aplet • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant, 20 bar • Head: Swivel head with 1° indexing steps • Tooling • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work area and clamping • Max. workpiece length for double-sided end machining: X = 3500 mm - 2 × max. tool length • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm (clamping plate length); 7 T-slots spaced 125 mm apart • Power supply: total connected load 42 kVA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm Duedpfjylw Stox Aplet • Taper SK 40 • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 8.737 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, Matec 30HV 3000x800x800 mm Duedpfx Apoyaa Sfeljt NC vrtljiva glava +/- 105°, nastavljiva Heidenhain TNC640 Rokavica (ročno kolo) Motorska vretena 15.000 obratov/min / 30 kW / 198 Nm Vpenjalni konus HSK 63A 48 mest za orodja IKZ 40 bar Trakasti filter, kapaciteta 450 litrov Zrak skozi vreteno Odsesavanje oljne meglice (levo in desno) Pregradna stena za nihanje Stranska vrata za nakladanje Priprava za dodatno NC os 3D merilna sonda Renishaw RMP60 Kontrola zloma orodja (laser) Vpenjalna hidravlika 100 bar / 10 l/min 2 x vpenjalni krog, vpenjanje, sproščanje, ročno in preko M-funkcije Vmesnik za robota Stroj ima zelo malo obratovalnih ur in je bil vedno odlično vzdrževan. Popolna (servisna) zgodovina nam je znana. Orodja in vpenjala se lahko prevzamejo skupaj s strojem.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1786, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik One, obremenitev mize: 1.500 kg, premer vrtljive mize: 800 mm, vrtljajska hitrost (min.): 25 obr/min, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 15.000 obr/min, dovod hladilne tekočine: 20 letvica, število vreten: 1, dolžina orodja: 460 mm, premer orodja: 200 mm, teža orodja: 10.000 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / horizontal Z = 975 mm / vertical - 1-axis CNC swivel head Swivel radius: 300 mm, maximum swivel angle: +/- 105 degrees Direct measuring system +/-3, either continuous or adjustable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct measuring system on X, Y, and Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Workspace lighting - Siemens Sinumerik ONE control system Modern CNC system for highly productive machine tools, comprising: NCU 1740 22'' display ITC2200 V3 Machine control panel MCP 2200 - Electronic handwheel (portable), HT2 - Remote diagnostics / teleservice - Motor spindle 15,000 rpm Motor spindle with 30 kW (S3-40% duty cycle) 17 kW (S1-100% duty cycle) Torque: 191 Nm (S3-40%) 108 Nm (S1-100%) - Internal coolant supply 20 bar Paper filter system tank capacity: 900 l Filtering capacity: 160 l/min - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to activate the external nozzles on the spindle head. #20 bar# - IK compressed air through the tool - Partition wall for twin-station operation - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring Dodpfx Apsxg Dhcjleut - Automatic safety doors

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Dujdpfx Apouyk N Ijlot

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees direct position measuring system +/-3, optionally continuous or indexed with clamping Clamping force: 2400 Nm unclamped, 4200 Nm clamped - Electronic handwheel (portable) - Telephone diagnosis / remote maintenance - Tool magazine with 48 positions - Auxiliary tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Included: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Steel sheet housing - 6 tool levels for depositing 216 tools with SK40 holders D=80 mm or D=160 mm if alternate slots are free, including: 40 pcs. with L=430 mm 64 pcs. with L=260 mm 112 pcs. with L=160 mm Maximum tool weight 10 kg - Tool input and output via a tool flap - Transfer to machine with a double gripper - Tool data entry via the machine control panel, selection of magazine slots via auxiliary magazine control panel - Option: Control panel for tool data entry at auxiliary magazine - Price surcharge for motor spindle 9,000 rpm Motor spindle with 30 kW (40% DC) 17 kW (100% DC) Torque 191 Nm (40% DC) 108 Nm (100% DC) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air at external nozzles - Internal compressed air through the tool - Rotoclear - Automatic safety doors - Rotary table HOWIMAT CNC 220.2/TMI-50 1-axis precision indexing device with direct drive Indexing accuracy deviation max. +/- 10 sec. Radial/axial runout deviation max. +/- 0.003 mm Djdjxg D Atspfx Apleut - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated into the machine table, without pull studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct position measuring system X/Y/Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Setup elements

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 50.106 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, največja hitrost vretena: 9.000 obr/min, moč vretenovega motorja: 16.000 W, število osi: 5, This 5-axis vertical machining center Matec 30 HV was manufactured in 2012. It features a generous X-axis travel of 3000 mm, a Y-axis travel of 800 mm, and a Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, reaching a spindle speed of up to 9000 rpm and a maximum table load of approx. 2500 kg. If you are looking for high-quality machining capabilities, consider the Matec 30 HV, which we are offering for sale. Contact us for further details. • Z-axis travel: 800 mm (horizontal) • Z-axis travel: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Total installed power: 55 kW • Central lubrication system • Machine condition: fully functional • Operating hours: 50,106 h • Control: Rexroth IndraMotion MTX Additional Equipment • NC rotary table Ø800 mm (horizontal), max. table load approx. 2500 kg • Internal coolant supply through the spindle (20 bar) • Coolant system with paper band filter and approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lighting Dodpfx Apsyrqvljleut Please note: The vise and zero-point clamping system shown in the images are not included in the scope of delivery. Technical Specification Taper Size SK 40

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Tehnični podatki so prikazani na sliki. Dsdpfx Apjrpn Dvsljut

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, kot vrtenja osi B (max.): 105 °, kot vrtenja osi C (maks.): 360 °, This 5-axis milling and turning center, Matec 30 HV, was manufactured in 2010. It features a travelling column design with a 3,000 mm travel range on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels by ±105°, while the C-axis offers 360° rotation, enabling the machining of complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of up to 500 rpm, it allows for precise turning and milling operations. For further information about this mill-turn center, please contact us. Additional Equipment • Turning package: Enables high-precision turning operations in combination with standard milling, facilitating both turning and milling within a single setup. Machine Advantages Qualitative Machine Advantages Dujdpox D Dy Hsfx Aplet • 5-axis CNC machining center with travelling column, rotary table, and swivel head Technical Machine Advantages • Full 5-axis capability for complex part geometries • The rotary table is fitted with a manual 3-jaw chuck Rota S Plus 800 by Schunk. • There is no hardware runtime counter on the computer. Additional Information Machine still under power

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 600 mm, število osi: 5, Ta 3-osni Matec 30 HV je bila izdelana leta 2013. Ima impresiven pomik osi X 2000 mm, pomik osi Y 600 mm in pomik osi Z 800 mm. Stroj omogoča največjo vpenjalno maso 1200 kg ter največjo hitrost vretena 8.000 min⁻¹. Če iščete visoko kakovostne možnosti obdelave, razmislite o vertikalnem obdelovalnem centru Matec 30 HV, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Z-pomik H: 800 mm Duodpfxeymm Exs Aplst • Z-pomik V: 700 mm • Premer interferenčnega kroga: 950 mm • Najv. vpenjalna masa: 1200 kg • Število orodnih mest: 48

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, število vreten: 1, število mest v zalogovniku orodij: 60, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Tehnična specifikacija: - horizontalno vreteno - vreteno HSK-A63 - navor vretena 240 Nm (za potrditev) Duodpfoyrfxhex Apljt - 4-osna obdelava - ATC za 60 orodij - menjalec palet (2 paleti) - dimenzija palete 500x500 mm - hladilnik hladilne tekočine - filtrirni sistem hladilne tekočine Knoll - tlak hladilne tekočine 50 bar skozi vreteno - krmilni sistem Fanuc - transporter za odrezke - vmesnik za robot - linearni merilni sistemi (lestvice) - izdelano leta 2014

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 14.136 h, potovalna razdalja osi X: 1.300 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC530, obremenitev mize: 400 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 16.000 W, število osi: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007 and is distinguished by its robust vertical machining center. It features a Rexroth control system, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine is equipped with a tool changer that has a capacity of 36 tools and a machine table capable of supporting up to 400 kg. If you are looking for a high-quality milling machine, consider the Matec MATEC 30 HV/K that we are offering for sale. Contact us for further information. Machine Advantages Qualitative Advantages • The machine is from 2007 but was retrofitted in 2016. Dusdpex D Ix Tsfx Apljt Technical Advantages • Hard drive: 26 GB • Integrated network card • Max. torque: 100 Nm (40% duty cycle) • Temperature-controlled liquid cooling • Working area: fully enclosed with roof, bellows (steel lamellas) • Installation: height-adjustable mounting elements • Matec HV 30 was overhauled by the manufacturer Matec Maschinenbau in 2016 Additional Information Cooling & Accessories Coolant: High-pressure coolant supply (20 bar, optionally 40 bar) Paper band filter (30 µm filtration) Tank capacity: 450 l Chip conveyor: Integrated scraper conveyor Oil mist extraction: Electrostatic filter (1000 m³/h) Measurement & Safety Technology Direct measuring system: Linear encoders on all axes 3D probe: Wireless transmission to the control system Tool monitoring: Laser-assisted tool breakage monitoring Tool length measurement (software) Optional Spindle (HSK 63-A): Higher output: 30 kW / 190 Nm Drilling capacity (steel): up to 60 mm Milling capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.990 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0903, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, model krmilnika: Heidenhain iTNC530, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Pomik osi 3000 x 800 x 1100 mm (X-Y-Z) Krmilnik Heidenhain iTNC530 Ročno kolo 48 orodij v verižnem magazinu Motorsko vreteno 12.000 min⁻¹ / 30 kW / 198 Nm Vpenjanje orodja HSK63 Neposredni merilni sistemi na vseh oseh Notranje hlajenje 20 bar s tračnim filtrom, prostornina 450 litrov Dujdoyqx N Djpfx Apljt Dodana NC rotacijska miza za H/V, premer 500 mm 3D merilna tipala Renishaw Tipalo za orodja Renishaw Novo motorsko vreteno, novi kroglični navoj na osi X, poravnana geometrija, popolnoma servisirano.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 12.000 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 720 mm, skupna višina: 3.376 mm, obremenitev mize: 2.500 kg, skupna masa: 16.300 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 33.000 W, teža orodja: 8.000 g, največja dolžina izdelka: 5.480 mm, število osi: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 positions and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table: 140 mm • Max. distance spindle nose to table: 860 mm • Work spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • Occupied adjacent pockets: 80 mm • Free adjacent pockets: 130 mm • Total magazine tool weight: 150 kgf Dedpox Nkp Ujfx Aplsut • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Mains frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank volume: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Fixture for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Travel motor for linear axis • Travel motor for rotary axis • Cylinder for swiveling unit

Stanje: dober (rabljeno), Leto izdelave: 2009, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.300 mm, Oprema: transportni trak za ostružke, Dobro stanje, funkcija millturn z glavnim vretenom. Dsdpfx Aeyl S Ntepleut