Matec 30 HV

Matec 30 HV

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, obratovalne ure: 36.111 h, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: LE 430 CA, skupna masa: 16.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 15.000 W, število osi: 4, This 4-axis CNC Matec 30 HV was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking for high-quality machining capabilities, you should consider the Matec 30 HV CNC vertical machining center we have for sale. Please contact us for further details. Fpsdeyzq A Sepfx Ahmjh • Axis travels and speeds • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant, 20 bar • Head: Swivel head with 1° indexing steps • Tooling • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work area and clamping • Max. workpiece length for double-sided end machining: X = 3500 mm - 2 × max. tool length • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm (clamping plate length); 7 T-slots spaced 125 mm apart • Power supply: total connected load 42 kVA

Stanje: pripravljen za uporabo (rabljen), Prodaja se Nikken CNC 400 rotacijska miza v zelo dobrem stanju! Pripravljena je za Mazak M32 krmiljenje, vendar jo je mogoče poljubno predelati. Premer plošče: 400 mm. Dimenzije (D/Š/V): 740/240/420 mm. Za dodatna vprašanja sem vam na voljo. Fpedpfx Ahsya Dtmsmsh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840D, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 30.000 W, število mest v zalogovniku orodij: 36, število osi: 5, Ta 5-osni stroj Matec 30 HV je bil izdelan leta 2006. Ima hode 2000 mm na osi X, 600 mm na osi Y in 800 mm na osi Z. Stroj je opremljen s CNC krmiljem Sinumerik 840D, orodnim magazinom s 36 mesti in hitrostjo vretena 12.000 min⁻¹. Če iščete visokokakovostne možnosti obdelave, razmislite o nakupu vertikalnega obdelovalnega centra Matec 30 HV, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Elektronsko ročno kolo • Kapaciteta orodnega magazina: 36 mest • Hlajenje skozi vreteno (IKZ): 20 bar Dodatna oprema • NC rotacijska miza: RW/NC 220/320 • Merilna sonda • Papirni filtrirni sistem: 450 litrov Tehnične specifikacije Fpodpfsy Rrlmsx Ahmsh Konus držala: HSK 63

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1786, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik One, obremenitev mize: 1.500 kg, premer vrtljive mize: 800 mm, vrtljajska hitrost (min.): 25 obr/min, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 15.000 obr/min, dovod hladilne tekočine: 20 letvica, število vreten: 1, dolžina orodja: 460 mm, premer orodja: 200 mm, teža orodja: 10.000 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, MATEC-30HV X = 3,000 mm Fpsdpfxoxg Dhcs Ahmoh Y = 825 mm Z = 1,100 mm / horizontal Z = 975 mm / vertical - 1-axis CNC swivel head Swivel radius: 300 mm, maximum swivel angle: +/- 105 degrees Direct measuring system +/-3, either continuous or adjustable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct measuring system on X, Y, and Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Workspace lighting - Siemens Sinumerik ONE control system Modern CNC system for highly productive machine tools, comprising: NCU 1740 22'' display ITC2200 V3 Machine control panel MCP 2200 - Electronic handwheel (portable), HT2 - Remote diagnostics / teleservice - Motor spindle 15,000 rpm Motor spindle with 30 kW (S3-40% duty cycle) 17 kW (S1-100% duty cycle) Torque: 191 Nm (S3-40%) 108 Nm (S1-100%) - Internal coolant supply 20 bar Paper filter system tank capacity: 900 l Filtering capacity: 160 l/min - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to activate the external nozzles on the spindle head. #20 bar# - IK compressed air through the tool - Partition wall for twin-station operation - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je CNC vertikalni stroj za obdelavo dolgih postelj Mazak. Hodi X/Y/Z: 3000mm/800mm/720mm, B-os: 110°, C-os: 360°, premer mize: 600mm, dimenzije dolge postelje X/Y: 3500mm/820mm, največja obremenitev mize: 2500kg, vreteno: BT40, hitrost: 18000vrt/min, hitri pomik: 50m/min, orodni mesta: 48, tlak hlajenja: 70bar. Dimenzije stroja X/Y/Z: pribl. 5250mm/3650mm/3200mm, masa: pribl. 16100kg, krmiljenje: Mazatrol Matrix 2, delovne ure vretena: 18502h. Vključuje vrtljivo mizo Nikken CNC 601MA, visokotlačno hlajenje, sredinsko pregradno steno, merilno sondo Renishaw in RMP 60Q, CAD/CAM programsko opremo Topsolid 7.18 ter postprocesor. Dokumentacija je na voljo. Ogled na lokaciji je možen. Fpodpsx Ih Dmefx Ahmeh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 14.136 h, potovalna razdalja osi X: 1.300 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC530, obremenitev mize: 400 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 16.000 W, število osi: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007 and is distinguished by its robust vertical machining center. It features a Rexroth control system, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine is equipped with a tool changer that has a capacity of 36 tools and a machine table capable of supporting up to 400 kg. If you are looking for a high-quality milling machine, consider the Matec MATEC 30 HV/K that we are offering for sale. Contact us for further information. Machine Advantages Qualitative Advantages • The machine is from 2007 but was retrofitted in 2016. Technical Advantages • Hard drive: 26 GB • Integrated network card • Max. torque: 100 Nm (40% duty cycle) • Temperature-controlled liquid cooling • Working area: fully enclosed with roof, bellows (steel lamellas) • Installation: height-adjustable mounting elements • Matec HV 30 was overhauled by the manufacturer Matec Maschinenbau in 2016 Additional Information Cooling & Accessories Coolant: High-pressure coolant supply (20 bar, optionally 40 bar) Paper band filter (30 µm filtration) Tank capacity: 450 l Chip conveyor: Integrated scraper conveyor Oil mist extraction: Electrostatic filter (1000 m³/h) Measurement & Safety Technology Direct measuring system: Linear encoders on all axes 3D probe: Wireless transmission to the control system Tool monitoring: Laser-assisted tool breakage monitoring Tool length measurement (software) Fpedpfex D Ix Tex Ahmsh Optional Spindle (HSK 63-A): Higher output: 30 kW / 190 Nm Drilling capacity (steel): up to 60 mm Milling capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees direct position measuring system +/-3, optionally continuous or indexed with clamping Clamping force: 2400 Nm unclamped, 4200 Nm clamped - Electronic handwheel (portable) - Telephone diagnosis / remote maintenance - Tool magazine with 48 positions - Auxiliary tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Included: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Steel sheet housing - 6 tool levels for depositing 216 tools with SK40 holders D=80 mm or D=160 mm if alternate slots are free, including: 40 pcs. with L=430 mm Fpjdpexg D Atefx Ahmeh 64 pcs. with L=260 mm 112 pcs. with L=160 mm Maximum tool weight 10 kg - Tool input and output via a tool flap - Transfer to machine with a double gripper - Tool data entry via the machine control panel, selection of magazine slots via auxiliary magazine control panel - Option: Control panel for tool data entry at auxiliary magazine - Price surcharge for motor spindle 9,000 rpm Motor spindle with 30 kW (40% DC) 17 kW (100% DC) Torque 191 Nm (40% DC) 108 Nm (100% DC) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air at external nozzles - Internal compressed air through the tool - Rotoclear - Automatic safety doors - Rotary table HOWIMAT CNC 220.2/TMI-50 1-axis precision indexing device with direct drive Indexing accuracy deviation max. +/- 10 sec. Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated into the machine table, without pull studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct position measuring system X/Y/Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Setup elements

Stanje: pripravljen za uporabo (rabljen), Na voljo je ploščinska brusilnica ELB-Schliff s prikazovalnikom položaja. Dimenzije magnetne plošče X/Y: 900mm/450mm, brusilna dolžina: 900mm, brusilna širina: 450mm. Dokumentacija je na voljo. Ogled na lokaciji je možen. Fpedpfx Ajya Hw Iohmjh

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.990 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0903, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, model krmilnika: Heidenhain iTNC530, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Pomik osi 3000 x 800 x 1100 mm (X-Y-Z) Krmilnik Heidenhain iTNC530 Ročno kolo 48 orodij v verižnem magazinu Motorsko vreteno 12.000 min⁻¹ / 30 kW / 198 Nm Vpenjanje orodja HSK63 Neposredni merilni sistemi na vseh oseh Notranje hlajenje 20 bar s tračnim filtrom, prostornina 450 litrov Dodana NC rotacijska miza za H/V, premer 500 mm Fpedpfxjyqx N Dj Ahmeh 3D merilna tipala Renishaw Tipalo za orodja Renishaw Novo motorsko vreteno, novi kroglični navoj na osi X, poravnana geometrija, popolnoma servisirano.

Stanje: dober (rabljeno), Leto izdelave: 2009, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.300 mm, Oprema: transportni trak za ostružke, Dobro stanje, funkcija millturn z glavnim vretenom. Fjdpfx Ahsyl S Ntjmeph

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 48.000 m/min, hitri pomik os Y: 80.000 m/min, hitri pomik na osi Z: 48.000 m/min, širina mize: 835 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-axis travel: 3000 mm Fpjdowyv Nzspfx Ahmsh Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg X-axis feed rate: 48,000 mm/min Y-axis feed rate: 80,000 mm/min Z-axis feed rate: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply: 25 bar Number of controlled axes: 4 Chip conveyor: Yes Coolant system: Yes Length: 8,000 mm Width: 3,800 mm Height: 3,800 mm

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.100 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 12.000 obr/min, nos vretena: VDI 40, število mest v zalogovniku orodij: 36, Dodatna oprema: Fedex Sv A Sspfx Ahmeph 4. os IKZ s tlakom 40 bar Zasukljiva glava z 1° razdelitvijo 3D brezžični zaznavalnik