Namizni rezkalni stroj / nihajni rezkalni stroj

Martin T 25

Stanje: rabljeno, Leto izdelave: 1991, Upravljalna plošča v višini oči Aigner z integralnim prislonom, vključno s podajalcem s pomično sani (brez prislonskega ravnila). Frezerski prislon z digitalnim prikazom in mehanizmom za odklon. Lokacija skladišča: Nattheim. Godpfoyi A Tdex Afweua

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Godpfx Aek Dpp Sofwoua Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Nagibna vretenasta rezkalnica Proizvajalec: Martin Tip: T25 Leto izdelave: 1994 Nagibni razpon: -5° do +45° Električna nastavitev višine in kota Premer vretena: 2 vretena, 30 mm / 40 mm Moč: 5/6 kW Število obratov: 3.000 / 4.500 / 6.000 / 9.000 min⁻¹ Gjdoyvrnrjpfx Afweua Levo-desni tek: Da Motorna zavora: Da Teža: Pribl. 1.500 kg

Stanje: dober (rabljeno), Leto izdelave: 1981, Spindle moulder, table milling machine, wood milling machine - Manufacturer: Martin, table milling machine type T 21 with table extension - Milling spindle: mount Ø 30 mm - Speeds: 3 rpm - Overall dimensions: 1620/1060/H1120 mm Gsdpfx Aswnbfkjfwjua - Total weight: 698 kg

Stanje: rabljeno, Moč motorja: 5,9 kW Premer vretena: 30 mm Hitrost(i): 3000 / 4500 / 6000 / 9000 vrt/min Guedpfx Afoyrhv Nowsa Nagibni vretenasti rezkar ali mizni rezkar Panhans tip 259 za natančno rezkanje, profiliranje in utorjenje masivnega lesa in lesnih materialov. Stroj je opremljen z nagibnim rezkalnim vretenom, kar omogoča vsestransko obdelavo pod različnimi koti. Idealen za mizarje, izdelavo pohištva in notranje opremljanje. Vključno s podajalnim aparatom Haffner.

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface Gsdpsqlckpofx Afwjua • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Gjdpfx Aow Naansfwjua Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Model: Optimat SGO 211/RC - Number of sanding units: 2 - Year of manufacture: 2008 - Working width: 1,100 mm - Sanding belt width: 1,120 mm - Sanding belt length: 1,900 mm - Workpiece thickness: 3–160 mm - Feed speed: 2.5–13 m/min - Weight: 1,800 kg - Table height adjustment Standard equipment: - Automatic workpiece thickness setting - Infinitely variable feed speed via frequency converter - Up to 125 sanding programs storable - Maintenance-free braking system 1st sanding unit (R) - Calibration roller - Profiled steel contact roller - Diameter: 160 mm - Drive motor: 15 kW 2nd sanding unit (C) - Combination unit with roller and sanding pad - Rubberized contact roller, 65 Shore - Contact roller diameter: 160 mm - Electronic segmented pressure beam with 35 mm segment width Gujdjyh Hwujpfx Afwea - Belt speeds: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz - Compressed air consumption at 6 bar: 20 l/min - Belt blow-off device per pressure pulse: 440 l/min - Extraction volume: approx. 2,880 m³/h at 20 m/s - Extraction nozzle: 1 x Ø 160 mm (sanding unit, roller) 1 x Ø 160 mm (sanding unit, pad) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Tračna brusilka, izdelana leta 2015. Ta Kundig Premium-1 1100K ima napajalno napetost 400 V AC in krmilno napetost 24 V DC. Deluje s tokom 24,90 A in ima moč 12,62 kW. Če iščete visokokakovostno brusilko, priporočamo razmislek o stroju Kundig Premium-1 1100K, ki ga ponujamo v prodajo. Kontaktirajte nas za več informacij. • Napajalna napetost: 400 V AC • Krmilna napetost: 24 V DC • Tok: 24,90 A • Moč: 12,62 kW Gsdpfx Aeyt Rlpofweua • Frekvenca: 50 Hz

Stanje: rabljeno, Leto izdelave: 1994, Used, top condition, high-end equipment, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 interchangeable spindles, adjustable table insert Make: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor 6 / 7.5 kW Tiltable from -10° to +45° Motor brake Motor with 2 speeds / pole-changing Speed ranges: 3250/5000/6500/10,000 rpm Right and left rotation Table size: 2700 x 700 mm Spindle diameter: 15 x 30 mm / 1 x 40 mm Spindle mount: HSK Quick-change spindle system SK / HSK Table extension: 2 x 650 mm Extendable frame support Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – cutting depth – jaw offset Guard and pressure device Control panel on top Swiveling control panel - electric height adjustment - electric swivel adjustment - electric milling fence Positioning control for 3 axes: height / swivel / milling fence with 99 programs Digital displays for swivel angle – spindle height – fence depth Swing-away device for the milling fence Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction port: 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Gjdpfx Afjythdvowoua Weight approx. 1073 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, function tested without refurbishment, without guarantee or warranty