Wolfking Y/D-Rev nakup rabljenega (61.732)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Wolfking Y/D-REV | Industrial frozen block grinder Manufacturer: Wolfking Model / Type: Y/D-REV Serial number: 52753 Plate diameter: 400 mm Power supply: 380 V / 3-phase / 50 Hz Rated current: 250 A Rated power: 33 kW Dimensions: 2700 × 1900 × 2800 mm Additional pallet with spare parts included The Wolfking Y/D-REV is a powerful, exceptionally efficient industrial grinder specifically designed for both coarse and fine mincing of whole, hard blocks of frozen meat, fish, or poultry. Thanks to its massive 400 mm plate diameter and 33 kW drive powered by 250 A, the machine can effortlessly break down and grind frozen raw material (up to -20°C) without the need for pre-thawing or pre-cutting with a guillotine. This allows you to maintain the highest microbiological quality of the product and dramatically reduce processing time. Key features: Njdpfxey Uarco Altjwi - Heavy-duty construction: Massive body and feed throat made entirely of acid-resistant stainless steel, designed to operate under extreme mechanical loads. - High throughput: The 400 mm diameter combined with a specially engineered feeding and cutting auger geometry provides enormous hourly capacity. - Minimal temperature increase: Special cutting system minimizes friction, preventing overheating of the raw material during grinding and allowing the fat and protein structure to remain intact.

Stanje: pripravljen za uporabo (rabljen), VMI ASSY 10330-0400 REV. D elektronski modul, serijska št. 4631400266, rabljen, z običajnimi sledmi uporabe, 100% delujoč, dobava po fotografijah. Nwodpfsxaif Hox Altji

Stanje: pripravljen za uporabo (rabljen), Siemens ME61-D / WD BOAN V1.3 IdNr 0003978-D-8D0705 REV B001 used, 100% functional Nodpfxoxahrlo Altswi

Stanje: zelo dobro (rabljeno), I am offering a high-quality compact hydraulic power pack from the renowned brand DANA / Brevini Fluid Power. The unit is in very good technical condition and ready for operation. An ideal solution for industrial, mobile, and service applications. ⚙️ Technical specifications: Manufacturer: Dana SAC Germany GmbH / Brevini Year of manufacture: 01/2023 Power supply: 12V DC Motor power: 0.7 kW Current: 100A RPM: 3100 Torque: 2 Nm Pump: 0.56 cm³/rev Max. pressure: 190 bar Tank volume: 2 liters Nedjy H Nn Rjpfx Altowi IP rating: IP54 Operating mode: S3 (10%) Rotation direction: CCW 🔩 Equipment: - Brevini hydraulic solenoid valves - valve block (directional control valve) - hydraulic quick couplings - complete 12V electric motor - oil reservoir - wiring harness + multi-pin connector 📦 Applications: These types of units are used in e.g.: - lifts and elevators - trailers and tippers - industrial machinery - mobile hydraulic systems - automation and specialized equipment 🧠 Additional information: - compact and highly efficient hydraulic unit - Dana/Brevini brand = high quality and durability - suitable for operation in demanding conditions

Stanje: rabljeno, prevoženi kilometri: 121.850 km, moč: 353 kW (479,95 KM), prva registracija: 09/2023, vrsta goriva: dizel, skupna masa: 18.000 kg, velikost pnevmatike: 315/80 R22,5, konfiguracija osi: 4x2, medosna razdalja: 3.900 mm, naslednji pregled (TÜV): 09/2026, barva: bela, voznikova kabina: drugo, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, klimatska naprava, nadzor oprijema, nizka raven hrupa, računalnik na krovu, tempomat, zapora diferenciala, dovoljena skupna masa: 18000 kg, velikost pnevmatik: 315/80 R22.5, 1. os: , 2. os: , vzmetenje s pomočjo zračnih blazin in listnih vzmeti, hidravlični sistem za nagibanje: enojni vod, retarder, tahograf, sedelna sklopka, elektronski zavorni sistem EBS, elektronski program za stabilnost ESP, sistem za nadzor zdrsa pogonskih koles ASR, prilagodljivi tempomat ACC, voznikov sedež z zračnim vzmetenjem, naslon za roko za voznika, MAN Media Truck Advanced, platišča iz lahke kovine, električni pomični okna, prikaz zunanje temperature, meglenke, električno nastavljiva zunanja ogledala, ogledala za nadzor robnika, širokokotna ogledala, barvno steklo, sončna zaščita, hladilna škatla, rotacijska luč, pomoč pri vožnji v klanec, LED-dnevne luči, držalo za pijačo, luči za zavijanje, gumijasta talna obloga, omejevalnik hitrosti, predal za shranjevanje, napake in spremembe pridržane. Ponujeno vozilo nima certifikata ADR. Nova hidravlična naprava za nagibanje, garancija proizvajalca velja do 09.2028. Nwsdpfx Aszphmujltji

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 10/2010, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5, medosna razdalja: 11.280 mm, barva: drugo, Leto izdelave: 2010, Oprema: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 2, Payload: 30,320 kg, Curb weight: 11,680 kg, Gross weight: 42,000 kg, Suspension type: Full air suspension, ABS, EBS, Body year: 2010, Axle type: BPW = Further Information = General Information Cab: Day cab License plate: OL-69-DV Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tire size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread left: 4 mm; Tire tread right: 5 mm Axle 2: Steering; Tire tread left: 4 mm; Tire tread right: 4 mm Weights Unladen weight: 11,680 kg Payload: 30,320 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, model years, and price ranges. Why buy from Kleyn Trucks? It’s easy! • Large, fast-changing stock • Recognizable quality • Competitive prices Nwsdpjw Da A Hefx Altji • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of “recognizable quality” • And much more... Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Stanje: rabljeno, Twin-shaft paddle mixer Nwodpfx Alozlyzietji suitable for vacuum operation Usable loading volume: approx. 2,600 L 2 discharge valves with new control cabinet Power: approx. 30 kW Dimensions: approx. 2,650 x 2,300 x 2,400 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, TBM-D 2009006 – Škatla za senzor položaja / Lagesensorbox V3 Proizvajalec: TBM SW-Entwicklung und Elektronik GmbH (Nemčija) Datum izdelave: 02/2024 Napajanje: 12 V DC, poraba 70 W Stanje: rabljeno, zelo dobro, brezhibno Profesionalna merilna / krmilna škatla, zasnovana za industrijsko uporabo. Naprava služi za upravljanje in obdelavo signalov iz pozicijskih senzorjev v testnih sistemih, avtomatizaciji in raziskovalno-razvojnih postajah. Nwjdpfsyc H R Tox Altoi Oprema in lastnosti: • LCD zaslon za prikaz parametrov • številčna tipkovnica za konfiguracijo in upravljanje • Komunikacijski vmesnik D-Sub • 12 V napajalne vtičnice • Robustno aluminijasto ohišje • CE oznaka • enota po pregledu (kontrolne nalepke TBM)

Stanje: rabljeno, Double-shaft paddle mixer Nedpfxszi Sdwe Altjwi Mixer capacity: 1,250 L 200 mm head with material trolley entirely stainless steel Mixer dimensions (L x W x H): approx. 2,350 x 2,000 x 2,600 mm Loading height: 2,200 mm pneumatic lid

Stanje: novo, Prodajam profesionalno industrijsko črpalko LOWARA BG9/D. Črpalka je nova, nikoli uporabljena, skladiščni kos. V kompletu je originalna embalaža in navodila. Znamka LOWARA (Xylem) je ena najboljših v industriji industrijskih črpalk. Idealna za vodne inštalacije, industrijo, kmetijstvo, tlačne sisteme ter kot vodna črpalka. Tehnični podatki: Proizvajalec: LOWARA Model: BG9/D Moč: 1,1 kW Izhodna moč: 0,9 kW Napajanje: 3 faze 400V Frekvenca: 50 Hz Pretok: 20–65 l/min Dvižna višina: 28,6–41,1 m Maksimalni tlak: 8 bar Material: nerjaveče jeklo (inox) Priključki: 1 1/4" / 1" Nsdpfx Aoyval Rsltewi Teža: cca 14,7 kg Stanje: Novo – skladiščno Možne manjše sledi skladiščenja na embalaži

Stanje: zelo dobro (rabljeno), Večnamenska peč z ogrevanjem na plin in paro. 2 m širok trak. Izjemno stanje, najboljši primerek, kar smo jih videli za ta model. Neposredno iz zaprte tovarne brezmesnih izdelkov. Peč Revoband omogoča natančno nadzorovan vertikalni tok vročega zraka, usmerjenega na izdelek od zgoraj in spodaj. Peč smo zasnovali z možnostjo nastavitve hitrosti ventilatorjev za vsako cono posebej, kar zagotavlja neomejeno prilagodljivost. Popolnoma primerna za piščančje fileje, perutničke in spodnji del peruti, hamburgerje, medaljone, ribje palčke, slanino, klobase, lazanjo in druge posebne aplikacije. LASTNOSTI IN PREDNOSTI: Visokohitrostni zrak zagotavlja enakomerno barvo in konstantne rezultate pečenja Natančen nadzor temperature in časa proizvodnje za ponovljive rezultate Možnost kuhanja s paro in povišano temperaturo ali samo s paro za procesno prilagodljivost Nodpsrd Rqkefx Altjwi Posredno ogrevanje odpravlja stranske produkte izgorevanja v proizvodnem območju.

Stanje: zelo dobro (rabljeno), Kuhalnik beljakovin neposredno iz tovarne z izdelki brez mesa. Kapaciteta: 6 regalov. V odličnem stanju. Njdpfxst R Skmj Altswi

Stanje: zelo dobro (rabljeno), Complet sistem cu 2 coșuri pentru procesul de gătire și răcire (cook-chill), proiectat pentru orez, paste și tăiței etc. În stare excelentă, achiziționat nou de către o mică fabrică de produse gata de consum din Wembley. Njdovuvbhopfx Altowi

Stanje: skoraj kot novo (rabljeno), JBT Double D rotacijska peč za 2 stojala. Primerna za 2 vozička dimenzij 18 x 30. Zelo čista in urejena. Za pekarsko uporabo. Nwsdpfx Aohyuchjltei

Stanje: dober (rabljeno), Rotacijska večnamenska peč / kuhalnik beljakovin z dvema velikima regalama (1 m x 1 m x 2 m). Prej uporabljena za kuhanje perutninskega mesa, primerna pa tudi za ribe, meso, zelenjavo in pripravljene obroke. Omogoča kuhanje samo s paro, s paro in povišano temperaturo, suho pečenje ter peko. To so industrijski standard v britanskih tovarnah za pripravljene obroke. Nsdpjmrqqdofx Altewi

Stanje: skoraj kot novo (rabljeno), Vrteča peč z dvema vozičkoma (za 18" x 30" pladnje), večnamenska peč oziroma kuhalnik za beljakovine. Prej uporabljena za kuhanje račjega mesa, lahko pa se uporablja tudi za ribe, meso, zelenjavo in pripravljene obroke. Omogoča kuhanje samo s paro, s paro in povišano temperaturo, suho pečenje ter peko. Gre za industrijski standard v britanskih obratih za pripravljene jedi. Nodpfx Aomrqqteltowi

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 08/2006, barva: drugo, Leto izdelave: 2006, Lastna teža: 5.600 kg Os 1: levo 6 mm, desno 6 mm Os 2: levo 8 mm, desno 8 mm Os 3: levo 8 mm, desno 8 mm Imamo možnost zlaganja prikolic! Nwsdpfx Alew Rn Hfotoi

Stanje: novo, številka stroja/vozila: D-CL-440-FR-EC, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 450 m³/h, raven hrupa: 58 dB, skupna višina: 1.430 mm, skupna dolžina: 450 mm, skupna širina: 550 mm, skupna masa: 50 kg, Oprema: Na voljo je tipska ploščica, vrtilna hitrost brezstopenjsko nastavljiva, ISI D-CLEANER Mechanical Air Filtration Unit (Dust) Model: 440 FR Version: Mobile Control: None Horizontal, mobile mechanical air cleaner with EC radial fan for dust extraction. TECHNICAL DESCRIPTION: Airflow: - 450 m³/h (free-blowing) (depends on installed filter media, without capture elements) Air inlet: Baffle plate as pre-separator Intake nozzle: 100 mm (left side) Filter configuration: - Filter cartridge (dust class M according to DIN EN 60335-2-69 Annex AA) - Cartridge cleaning via compressed air rotating nozzle Colour: RAL 7035 light grey (optional: custom colour) Voltage: 230 V Frequency: 50 Hz Protection rating: IP54 Fan technology: energy-efficient EC technology Airflow: adjustable Noise level: 58 dB(A) Dimensions: Length 450 mm / Width 550 mm / Height 1430 mm Nwodpfx Aovrxc Aoltei Weight: 50 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Tilting spindle moulder MAKA SF 4510 / GRIGGIO with power feed Very good condition, the machine comes from a small village joinery with 3 people Everything works flawlessly All bearings and guides are in good condition, the machine runs very smoothly Comes with a milling fence where one fence jaw can be adjusted in depth and features fine adjustment with a scale, allowing for jointing operations, e.g., when processing a gluing profile The entire milling fence can be finely adjusted using a set screw, enabling very precise settings With spindle lock via locking lever Efficient chip extraction, with two 120 mm extraction ports at the fence and on the machine Fitted with a 30 mm spindle, steplessly tiltable from -5° to 45°, tilting is adjusted via handwheel, and there is a precise degree scale With forward/reverse rotation The machine is personally delivered and demonstrated by us throughout Germany for €220.00, so you face no risk on purchase. Delivery to other EU countries is also possible Large table opening, which can be reduced with various rings (thus allowing the use of cutters with very large diameters and enabling safe use of small cutters) Njdpjy Rh Nzsfx Altswi Speeds of 3200, 4200, 6000, and 8000 rpm Spindle height adjustment is also via a handwheel with locking screw With exchangeable spindle (a 40 mm spindle can also be used) Optimal power transmission via V-belt drive The machine table is 1070 mm wide and 940 mm deep Ready to work immediately 380 V, 5500 W, with motor circuit breaker for overload protection Year of manufacture: 1999 Weight: approx. 700 kg CE marked With operating manual, motor brake, and emergency stop; the machine meets all requirements of the German Woodworkers' Association (Holz-BG) Additionally, you receive a 3-roller feed unit by HAFFNER with 8 speeds Optimal, simple, fast, and safe handling

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, proizvajalec krmilnikov: PFEIFER technology, vrsta laserja: vlakenski laser, laserska moč: 6.000 W, valovna dolžina laserja: 1.064 nm, Premer cevi (maks.): 160 mm, Dolžina cevi (maks.): 7.500 mm, dolžina mize: 6.500 mm, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 13 letvica, skupna masa: 5.500 kg, skupna dolžina: 14.800 mm, skupna širina: 2.900 mm, skupna višina: 2.525 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, delovno območje: 7.500 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, odsesavanje hlapov, varnostna svetlobna zapora, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 profile and tube laser fiber laser metal cutting for fast material changeovers with up to 6kW, ideal for your production needs. An intelligent and highly effective tube laser processing solution: round tubes, square tubes, rectangular tubes, open sections, and special profiles – all laser cut. This laser machine guarantees maximum productivity during production changeovers. The task: a fiber laser with up to 6kW for a wide range of metalworking applications! Unmatched Laser Cutting Performance High axis speeds and accelerations combined with a robust mechanical structure ensure excellent cutting performance and precision. Njdpfoyh A Nyjx Altewi The tube and profile laser processing machine is designed for production with a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony. Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile and tube loading chain system enables rapid job changeovers. The optional bundle loader offers independent operation. Bevel Cutting A feature that changes everything. With our machines’ ability to tilt the cutting head on a fifth axis up to 50°, we've solved one of the biggest challenges in modern profile processing. If the laser beam always hits the workpiece at a 90° angle, the result is an elliptical cutting edge. By enabling the tube laser cutting head to tilt, you can achieve fully angled cuts together with the feed axis. Naturally, the skyTUBE laser guarantees operational safety! The skyTUBE Pro is a class 1 laser system. There is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, nothing is more important than maximum safety and compliance with the highest standards and regulations. Technical Features: · Enclosed industrial housing; class 1 or, if required, class 4 laser · Working range for tube cutting system/clamping: Uniform tubes from 15 to 160 mm, rectangular tubes from 15 x 15 to 110 mm · Tube working area X 6500 / Y±100 / Z 150 / A ±360° / U ±50° · Automatic material feed for up to 6 x 160 mm profiles, lengths 3500 – 7000 mm · Automatic unloading system for profile sections, tailored to the desired profile length · Z drive system: ball screw axis with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: depending on material and laser configuration, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system; depending on desired profile cutting length, a standard system with max. 4.5 m automatic unloading results in a total system length of approx. 14,800 mm.

Stanje: novo, Leto izdelave: 2025, vrsta laserja: vlakenski laser, laserska moč: 6.000 W, valovna dolžina laserja: 1.064 nm, delovna dolžina: 1.250 mm, delovna širina: 1.250 mm, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, Working area: X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 kW laser power (* Pricing depending on configuration and laser power, this is a brand-new laser machine manufactured by us) Laser processing made easy and highly precise – laser cutting with high speed and quality Nsdpfx Alsk Ran Estowi

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, delovno območje: 6.500 mm, vrsta vhodnega toka: trifazni, skupna širina: 1.629 mm, skupna višina: 2.525 mm, skupna dolžina: 10.500 mm, dolžina mize: 6.500 mm, skupna masa: 5.500 kg, moč: 15 kW (20,39 KM), laserska moč: 6.000 W, trajanje garancije: 24 meseci, Oprema: hladilna enota, varnostna svetlobna zapora, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15 – 160 mm Format The skytube-pro-6500×3 profile and tube fiber laser cutting system for fast material changeovers, with up to 6kW effective cutting power for your production, is the smart and efficient solution for tube laser processing. Suitable for the laser cutting of round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine delivers maximum productivity during production changes. The task: the fiber laser with up to 6kW for a wide range of metalworking applications! Unmatched Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure excellent cutting performance and accuracy. The tube and profile laser processing machine designed for production requires minimal floor space—simply clever! Ingenious solutions 100% made in Saxony! Tubes and profiles from 15 x 15 up to 160 x 160 mm can be 3D cut with efficient fiber laser technology. The semi-automatic 6-fold profile tube loading chain system enables rapid changeovers between jobs. With the optional bundle loader, you can work independently. Bevel Cutting A feature that changes everything: Thanks to the capability of our machines to tilt their cutting head up to 50° along an additional fifth axis, one of the greatest challenges of modern profile machining is now solved. When the laser beam always hits the tube exactly perpendicular, it results in an elliptical cut edge. The ability to angle the tube laser cutting head allows for truly bevelled cuts in combination with the feed axis. Work safely with the skyTUBE Laser! The skyTUBE Pro is a class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and strict compliance with the highest standards and regulations. Technical Specifications: · Enclosed industrial housing, laser class 1 (optionally class 4) · Working area for tube cutting system/clamping: Uniform tubes from 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Tube working area X 6500; Y ±100; Z 150; A ±360°; U ±50° Nwodjrh Iw Tjpfx Altsi · Automatic material feed for up to 6 x 160 mm profiles from 3500 – 7000 mm · Automatic material removal system for profile cut-offs, design tailored to profile length · Z drive system: Ballscrew axis system with PTI SVZ system · X/Y drive system: Linear axis system with PTI AC-SERVO system · Productive cutting speeds: depending on material and laser configuration, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Maximum footprint dimensions (W x D x H): 11600 mm x 2830 mm x 2100 mm + unloading system depending on profile cut length

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, laserska moč: 6.000 W, valovna dolžina laserja: 1.064 nm, dolžina mize: 3.050 mm, širina mize: 1.550 mm, vrsta vhodnega toka: trifazni, skupna masa: 6.500 kg, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, varnostna svetlobna zapora, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting applications. It combines next-level productivity with efficiency and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, ensuring the highest level of safety. The ergonomic design with a pull-out worktable makes material loading easy. Drawers in the lower section of the machine are used for collecting cutting remnants. Enhance cut quality and speed even with thick materials thanks to 6kW laser power, including when cutting with compressed air. Switch between materials while maintaining uncompromisingly high cutting quality. With the skyCUBE laser, work with total peace of mind! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all of our laser machines, nothing is more important than complete safety and adherence to the highest standards and regulations. Special protective windows and a perfectly shielded cutting area reliably protect you from the dangers of laser radiation, while an independent safety system allows loading of materials without interrupting production. Choose the laser power best suited to your requirements—6 kW is our current standard! Nwodpfot A N A Rox Altji (* Price depending on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine 4.0 T Power supply dependent on laser source (6kW): 400V/50Hz, 3-phase / 27 kW Process gas control for: oxygen / nitrogen / compressed air, depending on material and process Laser processing simple and highly precise – high-speed, high-quality laser cutting

Leto izdelave: 2025, stanje: novo, številka stroja/vozila: AB2024, Pclass = Working area X 1250mm x Y 1250mm x Z 100mm Nedpfx Aedvik Nsltjwi (* Pricing depends on configuration and laser power; this is a brand-new laser machine from our own production) skyCUBE M, P, SL – Laser processing center – the new M, P or SL SLclass = Working area X 1250mm x Y 2550mm x Z 100mm class, more productive with a larger work area as a laser cutting machine for your metal processing Laser processing made easy and highly precise – laser engraving, cutting with high speed and quality

Stanje: novo, Leto izdelave: 2026, Pclass = Working area X 1250mm x Y 1250mm x Z 100mm Special solutions for laser processing available! (* Price varies depending on equipment and laser power, this is a brand new laser machine manufactured by us) skyCUBE M, P, SL, Laser Processing Center – the new M, P, or SL SLclass = Working area X 1250mm x Y 2550mm x Z 100mm Class, more productive with a larger working area as a laser cutting machine for your metal processing Nwjdpfxecwph To Altei Laser processing made easy and highly precise – laser engraving, cutting with high speed and quality