Altendorf F 45 Elmo nakup rabljenega (109)

Stanje: zelo dobro (rabljeno), Oprema: dozator, Električna nastavitev višine in kota žage; predrezilo. Csdpfx Aew Ix Alshxegt Lahko nas pokličete ali pišete. Govorimo in pišemo v nemščini in ruščini. Sporočila lahko pošljete tudi v angleščini.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), največja višina reza: 200 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.300 mm, dolžina pomične mize: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting capability + / - 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm travel - Mitre cross-cut fence 3200 mm Digit L Cjdsuh R R Eepfx Ahxegt - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Workpiece holder - On/off switch on the double roller carriage - Front support roller

Stanje: rabljeno, Leto izdelave: 1996, Dolžina sani: 3200 mm Širina reza pri vzdolžnem prislonu: 1300 mm Širina reza pri prečnem prislonu: 3200 mm Globina reza: 145 mm Predrezilo: ne Višinska nastavitev žaginega lista: električna Nastavitev nagiba žaginega lista: električna Nastavitev vzdolžnega prislona: električna Codpfx Aeyq Rz Sjhxegt Nastavitev prečnega prislona: ročna Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: - Prikaz vzdolžnega prislona: digitalni prikaz Prikaz prečnega merila: skala Premer žaginega lista: 450 mm Število vrtljajev: 4 Moč motorja: 5,5 kW Priključek za odsesavanje: 80 in 120 mm Dolžina stroja: 4000 mm Širina stroja: 2200 mm Teža: 1200 kg

Stanje: zelo dobro (rabljeno), Žagin list nagiben za 45° Cgsdpfx Ahsyq Ab Dexet Dolžina vozička: 3.200 mm Širina reza: 1.250 mm Moč motorja: 5,5 kW Premer žaginega lista: 350 mm Predrezalni agregat: 0,75 kW Formatna krožna žaga Altendorf tip F45 Elmo za natančne vzdolžne, prečne in poševne reze v masivnem lesu, ploščah in prevlečenih materialih. Stroj omogoča natančne in ponovljive reze zaradi gladko tekaškega formatnega vozička, motoriziranega nastavljanja (Elmo), predrezalnika in stabilne litoželezne konstrukcije. Idealno za mizarske delavnice, izdelavo pohištva in notranje opremljanje.

Stanje: zelo dobro (rabljeno), Formatna žaga Altendorf F45 elmo Voziček 280 cm, prereže celotno ploščo Duplex za kote v kompletu Nagib in dvig/spust žaginega lista električno nastavljiva Desno vodilo motorizirano nastavljivo do 1340 mm Dvoosni predrezovalec električno nastavljiv Motor 5,5 kW 4 hitrosti rezanja nastavljive z jermenom Maks. premer lista 350 mm Rabljeni stroj v zelo dobrem stanju Cjdpjyq E Iyofx Ahxegt

Stanje: rabljeno, Leto izdelave: 2023, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA23051204239033, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), širina reza pri vzporednem vodilu: 1.300 mm, glavni premer žaginega lista: 550 mm, dolžina odseka (maks.): 3.200 mm, dolžina mize: 840 mm, F45 Elmo Drive GM010.0407 Višina stroja 910 mm Upravljanje na višini oči Dvosmerni nagib Maks. premer rezila 550 mm Motor 5,0 kW (6,8 KM) Vario Dvoosna predrezalna enota z dvosmernim nagibom LED osvetlitev Podaljšek mizne plošče 840 mm Dvojni voziček 3200 mm Kotna priprava DIGIT LD CNC vzporedno vodilo 1300 mm Sprednji podporni valj DUPLEX 1350 mm (2019) Cjdpfeymdh Dsx Ahxjgt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), premer žaginega lista: 450 mm, nastavitev nagiba žaginega lista: 46 °, največja hitrost vrtenja: 5.000 obr/min, širina reza pri vzporednem vodilu: 1.300 mm, TEHNIČNI PODATKI Maks. premer žaginega lista: 450 mm Širina reza na CNC vzporednem vodilu: 1.300 mm Največje število vrtljajev: 5.000 min⁻¹ Stopnjevito nastavljivo Dolžina dvojnega vozička: 3.000 mm Csdpoy H Errsfx Ahxjgt Dolžina kotno-nagibnega prislona: 3.200 mm Digitalno nastavljivo Podaljšek mize: 840 mm Območje pnevmatskega hitrega vpenjala: 0–90 mm 2 hitra vpenjala PODATKI O STROJU Moč: 7,5 kW OPREMA CE oznaka Zaščita za žagin list Dvojni voziček s TIP-SERVO-DRIVE Zračno blazinska miza Razpršilna naprava z daljinskim upravljalnikom Sprednji podporni valj 2 pnevmatska hitra vpenjala Kotno-nagibni prislon Digit L CNC vzporedno vodilo

Stanje: rabljeno, Leto izdelave: 1999, Rabljeni stroj Leto izdelave: 1999 elektromotorno nastavljanje višine in nagiba za glavni žagin list, vnos mer prek tipkovnice digitalni prikaz naklona in višine reza CE izvedba Dolžina reza 3000 mm z zaklepom v srednjem in končnem položaju Širina reza 1000 mm z digitalnim prikazom in fino nastavitvijo Višina reza do 175 mm pri premeru žaginih listov 500 mm (pri tem mora biti predrezovalnik odstranjen) Motor 5,5 kW s 4 hitrostmi 3/45/6000 min⁻¹ ročno nastavljiv z avtomatsko zavoro in digitalnim prikazom vrtljajev Cjdey Ih R Tspfx Ahxjgt Dvoosni predrezovalnik z elektromotornim nastavljanjem višine in stranskega pomika Razpoložljivost: kratkoročno Lokacija zaloge: Röllbach

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Moč motorja 50Hz 3~ 400V 5,5kW Drsna miza 2800 mm brez predrezovalnika digitalni prikaz nastavitve kota digitalni prikaz hitrosti vrtenja hidravlično dviganje / spuščanje / nagibanje širina reza 1005 mm ročni paralelni prislon Cgsdey Icbgepfx Ahxst LAP laserski sistem kotni prislon (majhen) premer žaginega lista 250 - 450 mm

Stanje: dober (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodni tok: 11 A, največja širina rezanja: 800 mm, izvrtina žagine plošče: 30 mm, vrsta aktuacije: ročni, skupna dolžina: 2.800 mm, Oprema: zaščitni pokrov žaginega lista, Panel Saw / Table Saw / Circular Saw / Joiner’s Saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1978 Sliding Table Length: 280 cm Rip Capacity / Parallel Fence approx.: 80 cm Parallelogram Safety Guard with Top Extraction Hood Outrigger Table with Crosscut Fence Mitre Fence Motor Power: 5.5 kW Condition: See images and please refer to the item description. Parts can also be collected by the buyer. All dimensions are approximate. All information provided is to the best of our knowledge but without guarantee. Subject to prior sale. Items can be collected by the buyer, or shipping is available at the buyer’s expense. The stated shipping costs are a guideline; depending on distance and unloading options, these costs may vary. Please inquire. The item is offered under differential taxation. The stated sales price is the gross final amount. An invoice with VAT shown separately will not be issued. You will receive an invoice according to §25 UStG (German VAT Act). Cgodpfx Aey Aht Dohxot Warranty Terms: Due to wear and tear of used parts, the items are generally sold as defective – as spare part donors, only to commercial buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. If the offered item is used, the warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is new, the warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months. Reference to the EU online dispute resolution platform (OS).

Stanje: pripravljen za uporabo (rabljen), Priključna moč 380V Glavni motor 7,5kW Predrezkar 0,75kW Variabilni pogon Dvojni voziček 3000mm Električna nastavitev višine in nagiba Širina reza 1000mm CNC-krmiljena Vpenjalni sistem AKE Premer žaginega lista max. 500 mm Upravljalna plošča v višini oči Cedpfxey Hq N As Ahxjgt Zgornja miza z možnostjo nagiba Nosilec za predloge 2-osni predrezkar Podaljšek mize 840mm Kotni prislon PQS Standard PSV z ozkim in širokim pokrovom

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Nagib 45°, hidravlično dviganje, spuščanje in obračanje, 1000 mm desno od rezila, predrezilo, višina reza s predrezilom 130 mm, žagin list ø 400 mm, višina reza brez predrezila 150 mm, žagin list ø 450 mm, dolžina reza 3200 mm, zgornje odsesavanje, 5,5 kW. Cena iz skladišča Prevoz možen za doplačilo! Cgodpfx Ahsyaq Nbsxst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, F45 Pro Drive - Letnik izdelave 2017 - Zgornja upravljalna plošča - 3200 mm - Premer žaginega lista 500 mm - 5,5 kW - Priprava za predrezilo - Digitalni prikaz na vzporednem vodilu - Širina reza 1100 mm desno od lista - Nosilec za papirne predloge - Prikaz kota na prečnem vozičku - Duplex kotno prislonilo Cjdpeypmqajfx Ahxjgt Cena iz skladišča Prevoz možen z doplačilom!

Stanje: dober (rabljeno), Leto izdelave: 1990, moč: 5,5 kW (7,48 KM), največja višina reza: 140 mm, največja širina rezanja: 1.000 mm, dolžina mize: 1.400 mm, Types: F 45, Machine no.: 90-8-86 Cjdpfx Ajtxh Niehxogt

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1979, Funkcionalnost: nepreverjeno, Connected load 380V 5.5kW Star-delta switch Edging carriage length 3200 mm Height adjustment and tilting via handwheel Cutting width 1000 mm Cjdpfx Asv Uqa Eehxsgt Parallelogram guard with narrow hood Cross table with stop Parallel fence Scoring unit WITHOUT mitre fence

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1986, največja širina rezanja: 800 mm, dolžina rezanja (maks.): 2.800 mm, širina reza pri vzporednem vodilu: 800 mm, glavni premer žaginega lista: 450 mm, Stock number 86-1-224, year of manufacture 1986, connected load 380V, 5.5 kW, sliding carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety guard with narrow and wide hood, crosscut fence, mitre fence, rip fence, table extension 800 x 400 mm Cgjdpfx Ahewrb U Tjxot

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade Cgodew I Uxcjpfx Ahxst - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, številka stroja/vozila: GM010.0396, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, dolžina rezanja (maks.): 3.200 mm, dolžina mize: 840 mm, Altendorf F45, refurbished in the manufacturer's workshop, with ProDrive control!  TECHNICAL DETAILS Cutting Data: Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection 90°: 204 mm Saw blade projection +45°: 141 mm Double roller carriage length: 3,200 mm Table Data: Table length: 840 mm Performance Data: Power: 5.5 kW MACHINE DETAILS Cjdpfxoxc Uq Hj Ahxegt Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction top: Ø = 80 mm Extraction bottom: Ø = 120 mm Vacuum: 1,200 Pa at total suction connection Ø = 140 mm Air volume: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously adjustable speed Scorer LED lighting 3-axis scorer incl. park position On/off switch on double roller carriage Mitre/fence stop DIGIT X 1,300 mm digital rip fence Front support roller Second support on double roller carriage

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 150 mm, največja širina rezanja: 1.000 mm, dolžina rezanja (maks.): 3.200 mm, dolžina mize: 3.200 mm, Base equipment - Electromotive height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment, set via measuring scale, incl. manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Saw blade projection max. 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3/4/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control system - Electromotive height and tilt adjustment, also bilateral (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electromotive adjustment of the parallel fence* - Electromotive adjustment of the CNC angle fence UNO 90* - Automatic dimension correction for the parallel and angle fence when the saw unit is tilted - Digital speed display or stepless speed regulation (VARIO)* - Electromotive adjustment of the scoring unit, two or three axes* - Stepless fine control of the axes via +/- buttons - Control of the vacuum clamping system in the double roller carriage* - Simple axis calibration - Machine diagnostics - Operating hours counter - USB interface - Retrieval of the last dimension entry (back function) - 99 storable cutting programs - Grooving: with automatic step-by-step positioning of the parallel fence until the groove is completed - Automatic conversion of tip-to-tip to flat-to-flat dimensions on the parallel and angle fence, taking material thickness and tilt angle into account - Bevel cut function with automatic calculation of missing angles or dimensions - Extended tool management · Storage of scoring position (3-axis scorer)* · Storage of base blade thickness and cutting width of the main tool · Storage of the main tool's speed · Max. 100 storable tools Csdpfxjxuquls Ahxegt - Additional functions · Grooving: automatic step-by-step positioning of the parallel fence until groove completion · Chain dimension function: cutting sequences with identical spacing on the parallel fence, calculated on both sides relative to the saw blade · Angle cuts: removal of excess material creates the desired final size after inputting the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Template holder - Extended cutting height incl. tilting - 5.5 kW (7.5 HP) VARIO motor - 2-axis scoring unit - LED lighting - Double roller carriage with 3,200 mm length - On/off switch on double roller carriage - Digital angle and mitre fence L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Panel Saw Altendorf F 45 Year of Manufacture: 1994 S/N: 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine Type: Panel Saw Specification: Without Scoring Unit Technical Data Aluminum Sliding Table: 3000 mm Main Saw Blade Diameter: max. 450 mm (recommended: 300–350 mm for standard applications) Cutting Height at 90°: up to approx. 150 mm (depending on blade diameter) Cutting Length (sliding table): depends on configuration, typically 3000 mm Cutting Width at Rip Fence: approx. 1000 mm Main Saw Rotation Speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main Saw Motor Power: approx. 4 kW (optionally up to 5.5 kW) Saw Blade Tilting: 0–45° (manual adjustment) Height Adjustment: manually via handwheel Equipment Heavy-duty precision ball-bearing sliding carriage, aluminum construction Crosscut fence with adjustable angle stop and flip stops Cgjdjwrfmaopfx Ahxjt Robust rip fence with fine adjustment and digital readout Table extension (depending on configuration) Mechanical height protection / saw blade guard Special Features No scoring unit: Especially suitable for solid wood and rough cutting of panel materials. Heavy-duty industrial quality – durable, robust mechanics, easy maintenance Cast iron machine table for high running smoothness and precision EXTRA: Altendorf Digit X Digital Readout on Rip Fence Weight: 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Leto izdelave: 1980, stanje: dober (rabljeno), Altendorf F 45 Sliding Table Saw Year of manufacture: 1980 S/N: 80-8-203 Sliding Table Length: 2500 mm Height and tilt adjustment via handwheel Motor power: 5.5 kW Cutting width: 800 mm 4 speeds: 3/4/5/6000 rpm, saw blade diameter max: 450 mm Weight approx. 1100 kg Technical data subject to change Cgjdpfx Ahjipv Rljxot

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), premer žaginega lista: 550 mm, dolžina rezanja (maks.): 2.900 mm, Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length at mitre fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Max. blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse rating: 25 A Dust extraction connection Extraction (top): 80 mm Extraction (bottom): 120 mm Vacuum: 1,200 Pa at total extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder, directly at the control unit Preparation for 2-axis scoring unit Extended cutting height with single-sided tilting Cgedpfewynhpex Ahxjt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2022, številka stroja/vozila: GM010.0310, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), vhodna frekvenca: 50 Hz, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, dolžina rezanja (maks.): 3.300 mm, Altendorf F45, manufacturer-refurbished, with comprehensive ElmoDrive control system! TECHNICAL DETAILS Cjdpfx Ajw I Rtcshxegt Carriage lengths and cutting lengths: - Carriage length (double roller carriage): 3,400 mm - Cutting length with crosscut fence: 3,300 mm - TIP-SERVO-DRIVE: 2,990 mm - Max. saw blade diameter: 550 mm Saw blade: - Saw blade diameter: 550 mm - Saw blade projection at 90°: 204 mm - Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data: - Motor power: 7.5 kW - Voltage: 380–420 V - Frequency: 50 Hz - Circuit protection: 25 A Dust extraction connection: - Extraction port (top): 80 mm - Extraction port (bottom): 120 mm - Negative pressure: 1,200 Pa at total extraction connection, 140 mm - Air flow: min. 1,110 m³/h at 20 m/s Air cushion table: - Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT: - Extendable cross slide carriage extension - DIGIT L display

Stanje: rabljeno, Leto izdelave: 1986, Dolžina sani: 2200 mm Širina reza na vzporednem vodilu: 800 mm Širina reza na prečnem omejevalcu: 2800 mm Globina reza: 145 mm Predrezilo: ne Višinsko nastavljanje žaginega lista: ročni obroč Nagibna nastavitev žaginega lista: ročni obroč Nastavitev vzporednega vodila: ročna Prikaz kota žaginega lista: skala Prikaz višine reza: - Prikaz vzporednega vodila: skala Prikaz prečnega merila: skala Premer žaginega lista: Število vrtljajev: 4 Moč motorja: 5,5 kW Motorna zavora: ne Csdpsy Hqdtefx Ahxsgt Priključek za odsesavanje: 80 mm in 120 mm Dolžina stroja: 2500 mm Širina stroja: 1500 mm Teža: 1000 kg

Stanje: rabljeno, Leto izdelave: 1979, Dolžina sani: 3200 mm Širina reza na vzdolžnem prislonu: 1250 mm Csdpfsy A Hiwex Ahxegt Širina reza na prečnem prislonu: 2800 mm Globina reza: 140 mm Predrezilo: ne Višinsko nastavljanje žaginega lista: ročni kolut Nagibno nastavljanje žaginega lista: ročni kolut Nastavitev vzdolžnega prislona: ročno Prikaz kota žaginega lista: lestvica Prikaz višine reza: - Prikaz vzdolžnega prislona: lestvica Prikaz prečnega merila: lestvica Premer žaginega lista: 400 mm Število obratov: 4 Moč motorja: 5,5 kW Motorna zavora: ne Priključek za odsesavanje: 80 mm in 120 mm Dolžina stroja: 3200 mm Širina stroja: 1900 mm Teža: 1000 kg