Elu Ps 174 nakup rabljenega (11)

Leto izdelave: 1994, stanje: Okvarjen nosilec rezervnih delov (rabljen), številka stroja/vozila: 20 048 M100390 130003048, Traverse paths x/y/z: gross/small 6500/300 mm Spindle speeds: 5400 rpm Number of tool stations: 8 pieces Feeds: x/y and z 60/30 mm/min Spindle drive: max. 5.5 kW Predpfx Anoz N T Sepec The machine is sold for spare parts, as the control system is defective. Electrical connection: 400 V kW Space requirements: 8600 x 2270 x 2150 mm Weight: approx. 5000 kg

Stanje: rabljeno, Ponujamo enovreteno kopirno frezalno obdelovalno sredstvo. Opremljeno z nosilcem obdelovanca, vpenjalnim sistemom in ročnimi upravljalnimi ročicami. Ogled je možen po predhodnem dogovoru. Pjdpfxj Aga H Ts Anpsrc

Stanje: rabljeno, številka stroja/vozila: 4038, Funkcionalnost: popolnoma funkcionalen, moč: 2 kW (2,72 KM), vhodna napetost: 380 V, vhodni tok: 9 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja višina reza: 80 mm, premer žaginega lista: 330 mm, izvrtina žagine plošče: 32 mm, vrsta aktuacije: pnevmatičen, največja hitrost vrtenja: 3.800 obr/min, ELU krojna krožna žaga, tip MGS 73 za aluminijaste in plastične profile Žagin list 330 x 3,2 x 32 mm, Z = 96, negativen zob. Višina reza cca. 80 mm, Nastavitev kota reza levo/desno +/- 45°, 2 pnevmatske vpenjalne priprave, horizontalne, 2 pnevmatske vpenjalne priprave, vertikalne, Pjdpfezbr Uzex Anpjrc Motor 2 kW (2,7 KM), 380 V, 50 Hz, pnevmatski sistem za podajanje materiala z hidravlično zavoro za podajanje, upravljanje z roko, na levi strani vpenjanje in sproščanje, na desni strani podajanje za rezanje, litena podaljšek mize na desni strani z drsnim vodilom in merilno lestvico 0 - 3.000 mm, brez stikala za izklop v sili!, brez motorne zavore! kot je bilo pregledano, odjem na lokaciji Seevetal, pogoji dostave: Ex Works, brez transporta, pridržana pravica do vmesne prodaje.

Stanje: rabljeno, Leto izdelave: 1968, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, izvrtina žagine plošče: 32 mm, Oprema: dokumentacija / priročnik, zaščitni pokrov žaginega lista, - Gred za list žage, premer 32 mm - Dve hitrosti rezanja (1050 in 2100 vrtljajev/min) => Žaga se lahko zaradi različnih hitrosti rezanja in ustreznih listov žage uporablja za obdelavo lesa in plastike - Možnost nastavitve na 45 oziroma 90 stopinj, rezi med temi položaji so prav tako mogoči Pjdpfsz E S Ncsx Anpjrc - 380 V električni priključek - Prodaja brez listov žage - Vključno z navodilom za uporabo

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 27563, Funkcionalnost: nefunkcionalno, moč: 2 kW (2,72 KM), vhodna napetost: 380 V, vhodni tok: 10 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna dolžina: 750 mm, skupna širina: 750 mm, ELU / ELUMATEC DG 79 Double Mitre Saw – defective / for hobbyists For sale is a used double mitre saw, elumatec Type DG 79. The machine is expressly sold as defective or untested. Sale is strictly as a hobbyist device, for spare parts, or for repair. For safety reasons, the machine was taken out of operation. No warranty on function or operational safety. The DG 79 is an industrial double mitre saw for aluminium and plastic profiles, featuring a solid machine frame and pneumatic clamps. Technical data Predpfx Aney Ulvaspjc Manufacturer: ELU / Elumatec Model: DG 79 Machine type: Double Mitre Saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: up to approx. 3,000 mm depending on configuration Cutting area approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V three-phase power Compressed air connection required Condition used Expressly sold as defective no warranty no returns Inspection recommended Loading by buyer

Stanje: rabljeno, Leto izdelave: 1993, Technical details: Saw blade diameter: 250 mm Saw blade bore: 30 mm Cutting depth: 68 mm Cutting length: 450 mm Total power requirement: 2.55 kW Predpsu Nifyofx Anpsc Machine weight approx.: 150 kg Dimensions (L x W x H): 0.85 x 0.86 x 1.4 m This circular saw is manually operated and equipped with a worktable 400 x 860 x 22 mm, adjustable, mounted on a frame. Application: Wood, duroplastics, gypsum, chipboard, and other similar materials. Specifications of the pivoting arm: Length 800 mm, max. outreach 580 mm, swivels 45° to the right/left, with display via radial scale. Specifications of the saw carriage: Manual feed (hand lever), tiltable 90° to the left, with display via radial scale, motor 380V at 2,700 rpm, degree of protection IP44.

Stanje: dober (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Dvojna kotna žaga DG79 - 2 x 2 kW - 380 Voltov - Leto izdelave: 1988 - 2100 / 3800 vrt/min - Žagin list Ø 330 mm - Območje reza pri 90°: 195 x 90 mm; pri 45°: 135 x 90 mm - Najmanjša dolžina reza 500 mm, največja ca. 3300 mm - Stisnjen zrak 6-8 bar / 250 l/min - Teža: ca. 500 kg - Pnevmatska vpenjalna naprava Prevoz možen proti doplačilu! Zaradi starosti rabljene naprave je pri prodaji poslovnim strankam izključena garancija. Pjdpfxsygm Ako Anperc

Stanje: rabljeno, Leto izdelave: 1984, Technical specifications: X-axis travel: 400 mm Pjdju Nc Nxjpfx Anporc Y-axis travel: 100 mm Z-axis travel: 100 mm Electrical version - Voltage/Frequency: 380/50 V/Hz Total power requirement: 0.8 kW Machine weight approx.: 132 kg Space requirements approx.: 1.6 x 0.6 x 1.4 m This milling machine is ideally suited for window construction. Vertical mortising machine for aluminium - Pneumatic workpiece clamping - Feed operation by manual lever - Fuse: 2.2 V

Stanje: dober (rabljeno), Mitre and cross-cut saw, pull saw, chop saw, panel saw, mitre and chop saw, radial saw, radial arm saw - Manufacturer: Elu, mitre and chop saw with table on solid underframe, mobile - Model: MGS 72 - Motor power: 0.85/1.2 kW - Speed: 1050/2100 rpm - Saw blade: Ø 305 mm - Cutting height: max. 110 mm - Cutting width: max. 120 mm - Mitre: 45° both sides Prjdpepcmthofx Anpsc - Dimensions: 2100/840/H1180 mm - Total weight: 190 kg

Stanje: rabljeno, Copy milling machine, copy router, hand lever milling machine, hand lever router, single-spindle copy milling machine - Manufacturer: Elu, Copy Router Type AS 70 - Milling length: 365 mm - Milling width: 100 mm - Milling stroke: 45 mm - Motor: 220/380 V, 740 W Prjdpjif Huvofx Anpec - Spindle speed: 12,000 rpm - Dimensions: 800/750/H1320 mm - Weight: 108 kg

Leto izdelave: 1980, stanje: dober (rabljeno), Copy milling machine, copy router, hand lever milling machine, hand lever router - Application: Machining of aluminium and steel profiles - Equipped with 1 vertical and 1 horizontal milling motor - Each motor: 0.74 kW, 12,000 rpm - Installation dimensions: 2800 x 1100 x H1630 mm - Transport dimensions: 800 x 1200 x H1630 mm - Weight: 270 kg Prodpfx Asgfcm Aonpjc