Formatna žaga

Altendorf F45 ELMO III

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length Itjdpfx Alowka S Ie Nof - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: rabljeno, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm * Both grooving spindles positionable via ball screw * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port Isdpfx Alewgwlke Njtf * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: novo, The ALTENDORF F 25 offers everything you need from a sliding table saw in a compact footprint. Whether for your first own workshop, daily operations, industrial production, or as a powerful secondary machine — the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be processed effortlessly thanks to outstanding precision, easy handling, and excellent cut quality. The single-sided tilting saw unit also allows for angle cuts. The smooth-running double roller carriage, based on the Altendorf system, is part of the standard equipment, as are the digital height and tilt displays. This machine is equally suited for beginners and professionals alike. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Prepared for retrofitting of a scoring unit ----- Technical Data ----- Swivel range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade diameter: 315 mm Max. projection of saw blade: 104 mm Non-CE version: max. saw blade diameter: 350 mm, max. saw blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speed: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm Ijdpfxou R S Hcj Al Notf - Large extraction hood optional - - New demonstration machine -

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Maks. debelina robnega traku mm: 20 Maks. višina robnega traku mm: 51 Maks. debelina materiala v roli mm: 3 Minimalna dolžina obdelovanca mm: 140 Minimalna širina obdelovanca mm: 60 Lepljenje: 1906 patrona Pritiskalna enota Itodpfx Alew I U E As Njf Rezkalna enota 1920 za rezkanje poravnano do 20 mm in posnetje robov Potrebna površina D x Š x V mm: 3150x1800x1375 Teža pribl. kg: 800 Lokacija: Flörsheim Razpoložljivost: Kratkoročno

Stanje: novo, Leto izdelave: 2026, Circular saw with table, right-hand table extension, and straight and angular fence. This machine incorporates many features typically found in more expensive devices of this type. An excellent price-to-performance ratio has been achieved without compromising on quality or versatility. Machine description: This innovative circular saw combines power, precision, versatility, and compact dimensions. Designed for small woodworking shops, furniture manufacturers, and craftsmen. The machine uses solutions usually reserved for higher-end models, ensuring remarkable efficiency without sacrificing quality or universality. Supplied with a 250 x 30 x 2 mm carbide-tipped saw blade. MAXIMUM BLADE/BORE DIAMETER: 254x30 mm BLADE SPEED: 4,000 rpm BLADE TILT RANGE: 90–45° MAX. CUTTING DEPTH AT 45º: 65 mm MAX. CUTTING DEPTH AT 90º: 80 mm CUTTING WIDTH WITH TABLE EXTENSION: 750 mm MAXIMUM CUTTING LENGTH: 1,000 mm EXTRACTION PORTS: 100/25 mm Itjdpfx Asvxhi Eel Njf TABLE DIMENSIONS: 635 x 420 mm TABLE DIMENSIONS WITH EXTENSION: 635 x 1500 mm MOTOR POWER: 2.2 kW (S1) 400V / 3.1 kW (S6) WEIGHT: 110 kg DIMENSIONS: 1450 x 1000 x 1100 mm Manufacturer: Cormak

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Isdpjnl Nqqjfx Al Nstf Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Four independent chambers for entry, flooding, air-blow, and exit. Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Stanje: zelo dobro (rabljeno), Ravnalka SCM F520 Class Delovna širina: 520 mm 4-nožni valj Tradicionalni noži Elektronsko dviganje in spuščanje delovne mize Glavno vodilo nastavljivo do kota 45° Dolžina miz: 2700 mm CE certifikat Iedpfx Aox H S Dnjl Notf DTR dokumentacija Leto izdelave: 2014

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, številka stroja/vozila: KK052469, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 4kW Itodsiinm Hjpfx Al Nsf Table size 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Right-/left-hand rotation Motor brake Socket for feed unit Safety guards for hand routers Spindle diameter 30 mm Aigner fence Extraction connection 2x 120 mm Speeds: 1400/3500/6000/8000 rpm Operating manual

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment used, top condition, low hours Manufacturer: Altendorf Itjdpfxevxlq Ho Al Nef Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Scorer unit preparation Parallelogram guard Table extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: novo, Glazing Bead Stapling Machine "2 P Jumbo Automatic E.C." - New - Your Benefits: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to assign Staple Corner Jointing Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, clamping device from above and front Pressure is individually adjustable. Insertion of parallel and overlapping staples Itedpovnh T Nefx Al Nsf possible via electronic control programming. Stapler can be mounted on a suitable work table, operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Jointing Machine 2P with the optional mobile worktable (see details under additional charges) Additional charges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 detachable support rails, 1000 mm long, 2 pivoting and sliding support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 of which with brakes. ----- Surcharge: 1,321.00 Euro net Staples: packages 15 mm staples (package of 2,000 pcs): Price 22.00 Euro 12 mm staples (package of 3,000 pcs): Price 32.00 Euro 10 mm staples (package of 3,000 pcs): Price 32.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no guarantee!)