Traub Tnc 65 Dgy nakup rabljenega (8.424)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 87.094 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 140 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 18.500 W, skupna višina: 1.917 mm, skupna širina: 2.076 mm, skupna masa: 5.200 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i, največja dolžina izdelka: 4.354 mm, število mest v zalogovniku orodij: 10, število osi: 7, Ta 7-osna stružnica TRAUB TNC 65 DGY je bila izdelana leta 2009. Opremljena je z zmogljivim revolverjem z največjo hitrostjo 4000 min⁻¹ ter visokotlačnim hladilnim sistemom s programirljivimi stopnjami tlaka. Stroj je zasnovan za obdelavo kovin in plastike ter opremljen z osjo C za numerično krmiljeno struženje in pozicioniranje. Če iščete kakovostno stružnico, razmislite o nakupu horizontalne stružnice TRAUB TNC 65 DGY, ki jo ponujamo v prodajo. Za več informacij nas kontaktirajte. Hjdpoy Sg Nisfx Adrsfh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: popolnoma funkcionalen, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, Oprema: podajalnik palic, transportni trak za ostružke, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the machine within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Maximum counter-spindle speed: 4,000 rpm Maximum workpiece diameter: 56 mm Rapid traverse: up to 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Hedpfxsym A E Ij Adrefh Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece discharge via counter-spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 minutes Counter-spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 minutes Tool Turrets 1 & 2 Driven tools per turret: 10 (14) Maximum speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Tool holder bays/turret: 10 (14) Cylindrical shank according to DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time (as per VDI 2852): 1.2 s Station change time: 0.6 s Across 5 stations: 1.5 s Counter-spindle (numerically controlled in Z-direction) Maximum speed: 4,000 rpm Maximum clamping diameter: 65 mm Continuously programmable three-phase motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal pressure current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator’s position: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant/Lubrication Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read-off operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chuck system Two 10-position tool turrets with driven tool stations Counter-spindle External reference: L. Schaible

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Hsdsv Scrhspfx Adrofh

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Hfsdpfx Asv Scrbjdreh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-position turrets with live tooling drive VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts catalogue, circuit diagram, ATC optics Very good condition. Machine can be inspected under power. Machine geometry has been checked and corrected/set. Hjdpfx Adsyvfwfsrofh

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 7041245, CNC krmiljenje Traub System TX8 I, prehod palice 42 mm, največja dolžina struženja 450 mm, največje število obratov 8000 obr/min, 2 revolverja z 10 orodnimi mesti vsak, gnana orodja, hladilni sistem, transporter ostružkov KNOLL 240 S-1/50, filtracijski sistem/kompaktni tračni filter RESY. Hfsdpfx Aey Sqg Esdreh

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 1057, CNC krmilje TRAUB System TX 8 H, prehod palice 42 mm, maksimalna dolžina struženja 450 mm, maksimalno število obratov 8000 obr/min, 2 revolverja s po 10 orodnimi mesti, pogonska orodja, tračni filter KNOLL RP, transporter za ostružke. Hedey Sqhiopfx Adrsfh

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 7041219, CNC krmiljenje Traub System TX8 I, prehod palice 42 mm, maks. dolžina struženja 450 mm, maks. hitrost vrtenja 8000 vrt./min, 2 revolverji z 10 orodnimi mesti vsak, gnana orodja, transporter za odrezke KNOLL 240 S-1/50, filtracijski sistem/kompaktni trakasti filter RESY KBF 452/500. Hjdpfx Aoy Sqg Sedrsfh

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 7041201, CNC krmiljenje Traub System TX8 I, prehod palice 42 mm, maksimalna dolžina struženja 450 mm, maksimalna hitrost vrtenja 8000 vrt/min, 2 revolverja z vsakim po 10 orodnih mestih, pogonska orodja, transporter odrezkov KNOLL 240 S-1/50, filtracijski sistem/kompaktni tračni filter RESY KBF 452. Hedey Sqhcjpfx Adrjfh

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Max. speed: 8000 rpm X-axis travel: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle bearing diameter (front): 110 mm Tool mounts: 14 Max. torque: 170 / 230 Nm Rapid traverse (X-axis): 15 m/min Rapid traverse (Y-axis): 6 m/min Rapid traverse (Z-axis): 30 m/min Space requirement (L x W x H): 4354 x 2076 x 1917 mm Cross-section of tool slide (turning/milling support): 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Machine weight approx.: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N Feed travel X-axis: 140 mm Feed travel Z-axis: 450 mm Feed travel Y-axis: 35 mm Ballscrew (Z-axis) (Ø x pitch): 32 x 10 mm Ballscrew (X-axis) (Ø x pitch): 32 x 5 mm Ballscrew (Y-axis) (Ø x pitch): 25 x 5 mm Additional Information: - Turret 1, number of stations: 10 - Turret 2, number of stations: 14 Hodsy Ed E Uepfx Adrofh - Hecowpkfie Htlx Tfefh (text seems garbled/unreadable) - Driven tools: Yes The machine can be inspected under power by prior arrangement.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Hedex A Hdfepfx Adrofh

Stanje: rabljeno, Leto izdelave: 1996, maks. premer palice: 65 mm maks. premer vrtenja: 175 mm maks. dolžina palice: 3.000 mm Krmiljenje: sistem TX 8F Hod – x: 140 mm Hod – z: 520 mm CNC stružnica | TRAUB - TNC 42/65 DG, opremljena z nalagalnikom palic. Stroj je v dobro vzdrževanem stanju. Hodpoxbtq Nsfx Adrefh Videoposnetke stroja na lokaciji z veseljem posredujemo na zahtevo. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 364, model krmilnika: Traub TX8F, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Hfodjw Ec Aljpfx Adrsh Number of axes: 7 Control unit: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Sub spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Hodeu Eug Ispfx Adrofh Includes extensive accessories.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 124.009 h, število osi: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, two tool turrets with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant purification system and a hinged belt conveyor for efficient chip removal. If you are looking for a high-quality lathe, consider the TRAUB TNC65 DG horizontal lathe we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis on main spindle: Yes • C-axis on counter spindle: Yes • V-axis: Yes (programmable position) • Tool turrets: 2 (turret I and II) • Driven tools on turret I: Yes • Driven tools on turret II: Yes • Number of tool stations: 10 per turret • Thread cutting: Without compensation chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant equipment: Purification system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply integrated for both turrets • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC Hjdpfxsy R Uvus Adrjfh • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Compatible with water-based coolant Additional Equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (including preparation) • Workpiece ejector: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max. clamping diameter 60 mm Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Hfjdpfowp D Nbex Adreh Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Lathe TRAUB TNX 65/42 Year of Manufacture: 2009 Control System: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm Hjdpfx Adjyw H Szorofh - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed since 04/26 ACCESSORIES - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts ejector - Parts belt conveyor

Stanje: rabljeno, Leto izdelave: 1990, Turning diameter 250 mm Turning length 450 mm Control system TX8D Spindle bore 80 mm Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Hfsdpfet Hwq Dox Adreh Extra-large spindle bore, with bar feeder

Stanje: dober (rabljeno), Leto izdelave: 1994, TRAUB TNS 65 D / 5-osni CNC stružno-rezkalni center - Krmiljenje TX8 D - Popolni tehnični podatki na slikah - Leto izdelave: 1994 Hjdpfxoyc Nnze Adrefh - Podajalnik Hydrobar - Razni gnani držala za orodje - Držala za orodje - Trizverčnična glava - Popolna dokumentacija Pridržujemo si pravico do napak in sprememb.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 Hedpfx Asuhadzsdrofh - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW DIMENSIONS AND WEIGHT - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status light - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 6 - Number of static tool holders: 33 - Collet chuck: 2 HAINBUCH

Stanje: novo, 3 safety glass panes suitable for CNC lathe TRAUB TNA 300 Hfodpfx Aow Edq Djdrjh TNA 400 TNA 500 TNC 42 TNC 65 Size: 660 x 480 mm Price: €500.00 / unit net Delivery time: immediate, subject to prior sale Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: dober (rabljeno), Leto izdelave: 2007, Traub TNX 65/42 obdelovalno-sučilni center Leto izdelave: 2007 Serijska št.: 7060107 Vklop v obratovanje leta 2010 Krmilnik TX 8i-S (krmilnik na osnovi Mitsubishi/Traub s pogoni in motorji Mitsubishi) 15 CNC osi 4 X-Y-Z revolverji s po 10 postajami. Do 20 orodij na revolver Prehodna odprtina vretena in podvretena 65 mm (podvreteno ima spiranje s hladilno tekočino) Nožni pedal za vpenjanje/izpenjanje vpenjal vretena Servomotorni grabilnik gantry Hidravlični obračalni prijemalec z pnevmatskim prijemalom za obdelan kos in ostanek palice Transportni trak za odvod obdelancev RESY papirni pasovni filter hladilne tekočine Rezervoar za hladilno tekočino Knoll z BKW hladilno temperaturno regulacijo Visokotlačna črpalka za hladilno tekočino, 20 bar, in nizkotlačna črpalka, 8 bar Transportni trak za ostružke Knoll Revijski podajalnik palic FMB Turbo 5-55 (nov 2010) 2 enojna držala za stružna orodja 2 dvojna držala za stružna orodja 1 držalo za odrezovalno orodje 1 pogonsko dvojno radialno držalo za živa orodja tipa ER collet 1 pogonsko radialno držalo za živa orodja tipa ER collet 4 radialna pogonska držala za živa orodja tipa ER collet 1 radialno pogonsko držalo za rezkar tipa End Mill Hedpfx Asq Npqmsdrjfh 1 kotno nastavljivo pogonsko držalo za živa orodja tipa ER collet 2 radialni pogonski držali za rezkar tipa Shell Mill 2 aksialni pogonski držali za rezkar tipa End Mill 6 aksialnih pogonskih držal za živa orodja tipa ER collet 43 dodatnih držal za orodja – ločen seznam (glejte prilogo) Glavno vpenjalo vretena: Hainbuch collet chuck Podvreteno: Rohm dvokrako vpenjalo 2 rezervna kompleta vretenastih vreten Z-osi in ležajnih paketov.

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, Hfodpsw E Nnbofx Adroh 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 110.000 h, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, Opis sledi Hfjdpfex A Ha Hjx Adreh

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Centrifugal Vertical Cantilever Pump Chemical Pump FIP ALFA 65-40 V2CM Year of construction: 2008 DN: 50 Rated flow: 40 m³/h Rated head: 45 m Pressure [bar]: 16 Temperature [°C]: -25 ÷ +140 Speed: 1470 rpm Electrical power: 16.5 kW 400V 50Hz 34.7 A Motor speed: 1470 rpm Design: Vertical, axially split volute casing pump. Sump pump or channel impeller design. Applications: Handling of varnishes, aggressive liquids, and process fluids, even in the presence of suspended solid particles, for use in the chemical and petrochemical industries. Hfedpfx Adsh Rwbrsroh Length: 1700 mm Width: 700 mm Weight: 450 kg