Stroj Za Okroglo Krivljenje Pločevine - 4 Valji nakup rabljenega (114.890)

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Hnodpsypbqusfx Aaljk Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Hsdpfx Aasypbqnolsnk Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control Hnodpfx Aeypbqhealok IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations Hnedpsypbqbofx Aalok OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Hnjdsypbp Rspfx Aalok Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations Hodeypbp Djpfx Aalenk OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, vrsta upravljanja: ročni, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, število valjev: 3, premer spodnjega valja: 90 mm, premer zgornjega valja: 90 mm, dolžina valja: 1.100 mm, delovna širina: 1.030 mm, najv. debelina pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, maks. debelina pločevine iz nerjavečega jekla: 2 mm, skupna masa: 440 kg, skupna dolžina: 1.750 mm, skupna širina: 650 mm, skupna višina: 1.100 mm, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, Oprema: kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, Stroj za upogibanje pločevine DURMA MRB E 1030/3mm v odličnem stanju naprodaj. Proizvajalec: Durma MRB-E 1003 Letnik: 2010 Število valjev: 3 Premer zgornjega valja: 90 mm Dolžina valjev: 1030 mm Visoko trdni jekleni valji s SAE 1050 certifikatom kakovosti - Žične utore na koncih valjev (4/6/9 mm) Hsdpfx Aajyzrcgjlonk Oznaka CE Stožčasti valji Odprta zgornja valja Zadnji in spodnji valj ročno nastavljiv Upravljanje: nožna pedala Moč motorja: 1,5 kW z zavoro in reduktorjem Električni priključek: 400 V Okvir iz litega železa Teža stroja: 440 kg Dolžina: 1750 mm Širina: 650 mm Višina: 1100 mm

Stanje: novo, Širina pločevine: 1600 mm Debelina pločevine: 6 mm Upogib: 4 mm Premer zgornjega valja: 140 mm Premer spodnjega valja: 140 mm Premer stranskega valja: 120 mm Minimalni premer upogiba: Ø zgornjega valja x 3 Skupna potrebna moč: 3 kW Teža stroja ca. 2.000 kg Hsdpsyv N E Ujfx Aalonk Mere stroja: 3700x1300x1280 mm Dodatna oprema: - Naprava za stožčasto upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Jeklena konstrukcija stroja - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Kalibracija

Stanje: novo, Širina pločevine 2100 mm Debelina pločevine 40 mm Upogib 30 mm Premer zgornjega valja 390 mm Premer spodnjega valja 360 mm Hsdpfx Aaoyv Nt Eolenk Premer stranskega valja 300 mm Skupna potrebna moč 22 kW Teža stroja pribl. 17.200 kg Dimenzije stroja 5060 x 2200 x 2180 mm

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 13 mm Upogib 10 mm Premer zgornjega valja 300 mm Premer spodnjega valja 270 mm Premer stranskega valja 210 mm Skupna potrebna moč 11 kW Dimenzije stroja 5600 x 1800 x 1500 mm Teža stroja cca. 8.800 kg Dodatna oprema: - Naprava za konično upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Konstrukcija stroja iz jekla - Ločena nadzorna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Nosilna in preklopna ležaja zgornjega valja se upravljata iz kontrolne enote. Ko se preklopno ležišče odpre, se valj samodejno dvigne. - Konična nastavitev valjev preko nadzorne enote Hnsdpfx Aoyv Nh Nsaljk - Osrednji valji so poganjani s hidravličnim motorjem in planetnim reduktorjem (zgornji in spodnji valj) - Kalibracija

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 10 mm Upogib 8 mm Premer zgornjega valja 270 mm Premer spodnjega valja 250 mm Premer stranskega valja 210 mm Skupna potrebna moč 11 kW Teža stroja pribl. 7750 kg Mere stroja 5600x1450x1600 mm Dodatna oprema/izvedba: - Naprava za konično upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Naslonsko in podpornik zgornjega valja upravljata s krmilne konzole. Pri odprtju naslona se valj samodejno dvigne navzgor. - Konična nastavitev valjev preko upravljalne konzole - Osrednji valji s pogonom preko hidravličnega motorja in obhodnega reduktorja (zgornji in spodnji valj) - Kalibracija Hnsdpsyv Nhcefx Aalek

Stanje: novo, Širina pločevine 2100 mm Debelina pločevine 6 mm Upogibanje 4 mm Premer zgornjega valja 160 mm Premer spodnjega valja 140 mm Premer stranskega valja 120 mm Skupna potrebna moč 2,2 kW Dimenzije stroja 4140x1040x1140 mm Teža stroja pribl. 2.350 kg Dodatna oprema: - naprava za stožčasto krivljenje Hnodpfx Asyv Nf Usalsk - indukcijsko kaljeni valji - digitalni prikaz za stranske valje - stroj iz jeklene konstrukcije - ločena kontrolna konzola - dve hitrosti - vsi valji na krogličnih ležajih - preklopni in podporni ležaji zgornjega valja se upravljajo s kontrolne konzole. Pri odprtem preklopnem ležaju valj samodejno dvigne. - stožčasto nastavljanje valjev preko kontrolne konzole - centralni valji gnani s hidravličnim motorjem in obhodnim reduktorjem (pogon zgornjega in spodnjega valja) - kalibracija

Stanje: novo, Širina pločevine 2100 mm Debelina pločevine 13 mm Upogibanje 10 mm Premer zgornjega valja 230 mm Premer spodnjega valja 210 mm Premer stranskega valja 190 mm Skupna potrebna moč 7,5 kW Teža stroja cca 4.750 kg Prostorske zahteve cca 4150x1400x1300 mm Dodatna oprema/konfiguracija: - Naprava za stožčasto krivljenje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Ležaj za odpiranje in podporo zgornjega valja se upravlja iz upravljalne enote Ko se ležaj odpre, se valj samodejno dvigne. - Stožčasta nastavitev valjev preko upravljalne enote - Centralni valji so gnani s hidravličnim motorjem in planetarnim reduktorjem (zgornji in spodnji valj) Hodpfxsyv I Ubo Aalonk - Kalibracija

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 16 mm Upogib 13 mm Premer zgornjega valja 330 mm Premer spodnjega valja 300 mm Hnsdpfx Asyv I Smoalsk Premer stranskega valja 240 mm Skupna priključna moč 11 kW Dimenzije stroja 5600x1650x1900 mm Teža stroja pribl. 10.600 kg Dodatki/oprema: - Naprava za konusno upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena komandna plošča - Dve hitrosti - Vsi valji na krogličnih ležajih - Nosilno in preklopno ležišče zgornjega valja se upravlja s komandne plošče. Ko se preklopno ležišče odpre, se valj samodejno dvigne. - Konusna nastavitev valjev preko komandne plošče - Centralni valji so poganjani s hidravličnim motorjem in reduktorjem. (zgornji in spodnji valj) - Kalibracija

Stanje: rabljeno, Leto izdelave: 2004, skupna dolžina: 4.400 mm, skupna širina: 1.300 mm, skupna višina: 1.200 mm, Poids à vide : 2 500 kg Prix : Sur demande - Année de fabrication : 2004 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : 20440160 - Commande : Conventionnelle - Entraînement : Hydraulique - Nombre de rouleaux [pcs] : 4 - Nombre de rouleaux entraînés [pcs] : 4 - Puissance [kW] : 5,5 - Épaisseur max. de tôle [mm] : 4 - Épaisseur max. de pré-cintrage [mm] : 3,5 - Largeur de travail max. [mm] : 3 100 - Diamètre rouleau supérieur [mm] : 170 - Diamètre rouleaux inférieurs [mm] : 160 - Options : Affichage numérique, cintrage conique - Dimensions de transport : 4 400mm x 1 300mm x 1 200mm (L x l x h) Hnjdpfx Aajyym Tdolok - Poids de transport [kg] : 2 500kg - Colis de transport [pcs] : 1 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA récupérable pour les entreprises Livraison et reprise possible à tout moment pour tout équipement industriel Lukas van Rossum

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta aktuacije: električni, premer valja: 90 mm, delovna širina: 1.270 mm, najv. debelina pločevine: 3 mm, skupna masa: 520 kg, moč: 1,1 kW (1,50 KM), vhodna napetost: 400 V, največja hitrost vrtenja: 6 obr/min, vrsta vhodnega toka: trifazni, Oprema: kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, Stroj za upogibanje pločevine BOLUK BM 1270 x 90 - 2,5 stroj za upogibanje pločevine NOVO! Naprodaj. Proizvajalec: BOLUK 1270 x 90 mm Leto izdelave: 2023 Dolžina upogiba: 1270 mm Moč upogibanja: 2,5 mm Premer valja: 90 mm - Valji iz visoko trdnega jekla, certificirani SAE 1050 Hedpjxhub Aofx Aaljnk - Žične utore na koncih valjev (4/6/9 mm) - Ročno nastavljiv zadnji valj - Mobilna upravljalna plošča s pedalom - Natančno upogibanje z zavorno-motorjem - Konusna naprava za upogibanje - Ročno zložljiv konec - Glavni okvir iz litega železa Hitrost upogibanja: 6 m/min Moč motorja: 1,1 kW, 50 Hz, 380 V Premer žične utore: 4/7/10 mm Dimenzije stroja: 1850 x 700 x 1200 mm Teža: 520 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Sheet width: 2600 mm Sheet thickness: 10.0 mm ST Pre-bending: 8.0 mm ST Top roller diameter: approx. 220 mm Side roller diameter: approx. 170 mm Lower roller diameter: approx. 190 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: approx. 5000 kg Dimensions (machine only): approx. 3500 x 1550 x 1400 mm Very good condition (!!) Current list price incl. accessories: approx. EUR 120,000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll concept offers highly versatile bending and rolling capabilities - Swiveling control unit * Operation – control of all rollers and machine axes * Digital position display for the side rollers * Manual operation via joysticks - Two central rollers are powered directly by hydraulic motors - Conical rolling possible by tilting the rollers - Side roll parallelism ensured by torsion shafts Hedpfx Aasylpz Helonk - Double-sided pre-bending - Diameters up to 1.1 times the top roller diameter possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Continuous lubrication of all bearings - Solid welded steel construction - Electro-hydraulic drop end for easy removal of pipes - Manometer/pressure gauge for the rollers - Safety device (safety rope with switch unit) - Operating manual * Special accessories included: * - ROCCI height-adjustable center support * for large tube diameters - ROCCI electro-motorized feed table * Motorized sheet feed and material support table

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Blechbreite 1550 mm Blechstärke 6,5 mm Anbiegung 4,5 mm Oberwalzen-Durchmesser 150 mm Seitenwalzendurchmesser 130 mm Unterwalzen-Durchmesser 150 mm Abstand max. OW zu UW 20,0 mm Hodpfx Aaoxabkbslenk Gesamtleistungsbedarf 2,2 + 1,5 kW Maschinengewicht ca. 2370 kg Abmessung L-B-H 3300 x 1150 x 1110 mm Ausstellungsmaschine - NEU noch nicht in Gebrauch gewesen (!!) Sonderpreis auf Anfrage Ausstattung: - elektro-hydraulische 4-Walzen Rundbiegemaschine * mit angetriebener Oberwalze + Unterwalze * stabile Schweißkonstruktion - Einsatzbereich: * leichte bis schwere Blechbearbeitung (Stahl/ALU/Edelstahl) - elektro-hydraulische Verstellung der Unter- + Seitenwalzen - lineare Führung der Seitenwalzen - Oberwalze angetrieben durch robusten Elektromotor + Planetengetriebe - freibewegliches, separates Bedienpult - gehärtete Walzen SAE 1050 (CK 45) + bombiert - Konischbiegeeinrichtung - 3x Achs Digitalanzeige für genaue Walzenpositionen - elektro-hydraulisches Klapplager - Bedienungsanleitung (PDF)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, številka stroja/vozila: 25498, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 260 mm, delovna širina: 2.070 mm, najv. debelina pločevine: 25 mm, TEHNIČNE PODROBNOSTI Širina pločevine: 2.070 mm Debelina pločevine: 25 mm Upogib: 18 mm Premer zgornjega valja: 320 mm Premer stranskih valjev: 260 mm Premer spodnjega valja: 320 mm PODROBNOSTI O STROJU Skupna potreba po moči: 26 kW Dimenzije in teža Prostorske zahteve: cca 4.700 x 2.000 x 2.200 mm Teža stroja: cca 8.100 kg Hsdsygw Ikopfx Aalonk OPREMA hidravlično pomikanje stranskih valjev naprava za konično upogibanje 2 gnana valja utrdjeni valji hidravlični preklopni ležaj premična upravljalna konzola nožno stikalo varnostna naprava CE znak

Stanje: novo, Sheet width: 3100 mm Sheet thickness: 13.0 mm Pre-bending capacity: 10.0 mm Top roll diameter: 300 mm Side roll diameter: 210 mm Bottom roll diameter: 270 mm Total power requirement: 11.0 kW Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit/display with touchscreen functionality * Digital position indicator for both side rolls - Mobile operating console Hnjdexabflopfx Aalek - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety feature (safety cord with switch unit) - Manometer/pressure gauge for the rolls - CE mark + Declaration of Conformity - Operating manual

Stanje: novo, Sheet width 1600 mm Sheet thickness 15.0 mm (steel) Pre-bending 13.0 mm (steel) Top roll diameter 230 mm Side roll diameter 210 mm Lower roll diameter 190 mm Hnjdpfx Aasxabkholjk Total power requirement 7.5 kW Machine weight approx. 4225 kg Space required approx. 4000 x 1300 x 1440 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom rolls) - With hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit/display with touchscreen function * Digital position indicator for both side rolls - Mobile control console - 2x selectable bending speeds - Hydraulic folding bearing - Safety device (safety rope with switch unit) - Manometer / pressure gauge for the rolls - CE mark + Declaration of conformity - Operating manual Illustration shows identical model series

Stanje: novo, Sheet width: 2,600 mm Sheet thickness: 10.0 mm Bending capacity: 8.0 mm Top roller diameter: 230 mm Side roller diameter: 190 mm Lower roller diameter: 210 mm Total power requirement: 7.5 kW Machine weight: approx. 5,560 kg Dimensions (LxWxH): 4,650 x 1,380 x 1,300 mm Hedpfx Aasxaalqoljnk Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x powered main rollers (top and bottom roller) - With hydraulic cone bending device - Induction-hardened rollers - Includes alignment function for welded pipes - Control unit/display with touchscreen function * Digital position display for both side rollers - Mobile control panel - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety cable with switch unit) - Manometer/pressure gauge for the rollers - CE marking + declaration of conformity - Operating manual

Stanje: novo, Sheet width: 3100 mm Sheet thickness: 8.0 mm steel Bending capacity: 6.0 mm steel Top roll diameter: 230 mm Side roll diameter: 210 mm Lower roll diameter: 190 mm Hnjdpfx Aajxabm Ajlek Total connected load: 7.5 kW Machine weight approx. 6,020 kg Space requirement approx. 5142 x 1390 x 1300 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top and bottom roll) - With hydraulic cone bending device - Induction hardened rolls - Integrated straightening function for welded pipes - Control unit / Display with touchscreen function * Digital position indicator for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) - Manometer / pressure gauge for the rolls - CE mark & Declaration of Conformity - Operating manual

Stanje: novo, Sheet width: 4100 mm Sheet thickness: 8.0 mm steel Pre-bending: 6.0 mm steel Top roll diameter: 300 mm Side roll diameter: 210 mm Bottom roll diameter: 270 mm Total power requirement: 7.5 kW Machine weight approx. 9,930 kg Required space approx. 6532 x 1730 x 1489 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit / display with touchscreen function * Digital position indicator for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end Hnedpfx Aexab Tcoalok - Safety device (safety cord with switch unit) - Manometer / pressure gauge for the rolls - CE marking + Declaration of Conformity - Operating manual

Stanje: novo, Sheet width: 4,100 mm Sheet thickness: 13.0 mm (steel) Pre-bending: 10.0 mm (steel) Top roll diameter: 360 mm Side roll diameter: 250 mm Lower roll diameter: 330 mm Total power requirement: 11.0 kW Machine weight: approx. 16,000 kg Required floor space: approx. 6542 x 1677 x 1900 mm Equipment: - Electro-hydraulic 4-roll plate bending machine Hnodpfx Aaexabuyolok - 2 driven main rolls (top and bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit/display with touchscreen functionality * Digital position indicator for both side rolls - Mobile control desk - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) - Manometer/pressure gauge for the rolls - CE mark + Declaration of Conformity - Operating manual