Sidel Sbo 6/10 Stroj Za Raztezno Pihanje nakup rabljenega (116.760)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SBO 6/10, Sidel stretch blow molding machine Max. output: 6,000 bottles/hour Max. bottle size: 3,000 cc Blow stations: 6 The machine is in very good and well-maintained condition. GENERAL INFORMATION The SBO 6/10 features 6 cavities and 10 heating modules. Operates with a variety of bottle sizes and designs from 0.25 to 3 liters. Two-stage PET stretch blow molding machines from Sidel require pre-manufactured preforms to be fed into the machine. Separating the processes for producing bottles and preforms allows for production optimization, greater operational flexibility, and provides a higher production capacity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9 – 41 mm (measured from bottom of support ring) Blodpfx Agsg Ailcoteg Minimum ID of neck: 19 mm Maximum OD of neck: 34 mm Preform support ring diameter: 29 – 51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle capacity: 0.25 – 3 liters TYPICAL PREFORM WEIGHTS (for still and carbonated liquids) 0.25 liter bottle: 14-20 grams 0.50 liter bottle: 20-33 grams 1.00 liter bottle: 26-40 grams 1.50 liter bottle: 35-51 grams 2.00 liter bottle: 44-58 grams 3.00 liter bottle: 68-84 grams BLOW WHEEL Height: 3.5 meters Number of cavities: 6 Clamping force: 10 tons Item height (below neck) at discharge: approx. 1.4 meters Machine DC drive motor power: 4 kW HEATING UNIT Height: 2 meters Number of oven heaters: 10 Number of heating zones per module: 8 Maximum power: 170 kW ELECTRICAL REQUIREMENTS Maximum supplied power: 200 kW Average consumption: 100–150 kWh (varies with bottle produced) COMPRESSED AIR Available supply pressure: 7–35 bar Operating pressure: 7 bar Flow rate: 50–100 Nm3/h (varies with bottle produced) Blow pressure – Standard base: up to 25 bar Blow throughput – Standard base: 110–550 Nm3/h Blow pressure – Petaloid base: up to 35 bar Blow throughput – Petaloid base: 155–770 Nm3/h CHILLED WATER Temperature: 10–12°C Pressure: 5–6 bar Flow rate: up to 6 m3/h Heat dissipation: up to 16,000 kcal/h WEIGHT Blow wheel with molds: 8 tons Heating unit: 2.2 tons Preform feeder: 0.65 tons Control cabinet: 0.85 tons PREFORM HEATING UNIT The preforms are transported with the necks facing upward to the heating unit. This module ensures that preforms are rotated before passing neck-down in front of the heating elements, and again afterward. During the heating phase, the preforms are rotated and the necks are shielded from heat to optimize thermal distribution without distorting the neck. Heating is performed via 10 heating modules. Each module can accommodate up to 8 horizontally-stacked IR lamps, with air-cooled ends. The heating output of the 8 zones—matching the 8 lamp rows—is adjustable to optimize the temperature profile. These zones are regulated across all SBO models. After heating, an IR camera monitors preform temperature, enabling automatic adjustment of the controlled zones to maintain the required temperature at all times.

Stanje: rabljeno, Leto izdelave: 1992, Overview This blow molding machine was built in 1992 by the French manufacturer Sidel. It is capable of producing up to 4,000 bottles per hour. Technical details Capacity: 4,000 bph 4 cavities Scope of delivery Blow molding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two mold types for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Bsdenpbhvepfx Agtelg

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Blodperkgy Uofx Agtjg Comprehensive spare parts list available upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna masa: 8.700 kg, dolžina obdelovanca (maks.): 165 mm, premer obdelovanca (maks.): 35 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of cavities: 6 Maximum output: 7,200 bottles/h Product dimensions Maximum preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Maximum neck finish diameter: 38 mm Neck height: 9–27 mm Maximum bottle height: 350 mm Maximum bottle diameter: 105 mm Maximum bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow moulding module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow moulding module: 6,300 kg Control cabinet: 1,200 kg Preform feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Bjdpfoyrfvgjx Agtslg Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10% Frequency: 50 Hz ±1% Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Blodpfx Ajkucxlsgteg Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: rabljeno, Leto izdelave: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Using a tipping device, preforms are unloaded from a container into the feed hopper. From there, the preforms are conveyed by an elevator belt with electronically controlled speed and are supplied via a chute and loading starwheel to the blow molding machine in a uniform orientation. The shape and size of the preforms are inspected, and defective preforms are ejected before being delivered to the heating ovens by a mechanical starwheel. In the heating ovens, the preforms are preheated by infrared lamps. For symmetrical heat distribution, they are continuously rotated during this process. Fans prevent overheating of the outer surface. Finally, preform temperatures are monitored by an optical pyrometer. Grippers feed and remove the preforms to/from the blow wheel. The blowing unit uses 'crocodile molds,' in which the stretching along the longitudinal axis is supported by a stretch rod. The preforms are then blown into PET bottles. The stretch-blown bottles are extracted from the cavities by grippers and conveyed to the discharge station. Machine (additional info): Rotary blow molding machine Power: 58 kW Number of cavities: 8 units Number of bottles ejected per cycle: 202 units Blow pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Water supply: 4 bar Compressed air: 360 Nm³/h at 7 bar Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with container tipping device, preform elevator conveyor, preform inspection, heating ovens, blow wheel, bottle discharge, on-screen visualization Weight: 16,700 kg Bledsxyktlspfx Agtsg

Stanje: novo, Parts for SIDEL blow moulding machine: - Ball bearings - O-rings - Nozzle - Belts Bjdpfoiqum Ijx Agtelg - Shaft

Stanje: rabljeno, Geschwindigkeit: 8.000 Flaschen pro Stunde mit 0,5-Liter-Flasche. Verschiedene Formate sind optional möglich. Der Abbau wurde Anfang Februar 2018 von der Seegräber GmbH durchgeführt. Im Lieferumfang enthaltene Maschinen: Bledpfexytvijx Agtog - SIDEL SBO 6 Blasmaschine, 2006 komplett von SIDEL überholt - Preform-Magazin und Preform-Elevator Kompressor, Kühlung und Formen sind nicht enthalten.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, višina izdelka (maks.): 380 mm, premer obdelovanca (maks.): 130 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of moulds: 6 Capacity for standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Bljdpfx Aex A Uu Ejgtog Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg 415V / 380V transformer dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeding dimensions: 2,000 x 2,500 mm Preform feeding weight: 250 kg Feeding guides length: 2,000 mm Power supply Total power: 142 kW Main connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12 °C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT 415V / 380V transformer Preform hopper and conveyor Preform feeding Feeding guides Adaptation to other voltages possible

Leto izdelave: 2026, obratovalne ure: 25 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P1S10_27_3, The PressOne P1S-10 is a press-in machine from Finland, driven by a ball screw with a servomotor. This gives you the best of both worlds: force, speed, and precision. No oil means no leakage issues, no hassle with oil changes, and no filtration problems—just pure power, accuracy, and speed! Technical Specifications: P1S-10 Main press technology: Ball screw with AC servodrive Maximum pressing force: 100 kN Repeatability of force setting: ±1% Maximum opening / approach speed: *120 mm/s Bljdpfx Aey A Ntljgtjg Pressing speed: max. 10 mm/s Throat depth: 620 mm Stroke length: 210 mm Faster operation range: M2 – M10 Servomotor: 5 kW Control: P1S TC12 Touchscreen 12" Tool interface: PressOne Universal type, 4-position lower rotary base *Maximum approach speed requires the "High Approach Speed" option. P1S TC12 Control Features: - Programmable pressing force - Programmable stroke opening - Programmable pressing speed - Programmable speed change point after approaching before pressing - 2-stage cycle (approach and pressing) - Ability to set pressing stroke length in millimeters - Program memory for saving by name or number - Piece counter, cycle stop after final pressing - Material table for material/pressing force - Tool library - FTP server connectivity

Leto izdelave: 2026, obratovalne ure: 25 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P1S10_34, Electric press-in machine P1S-10 from the PRESSONE series by CoastOne, Finland, with spindle drive. Blsdpfxey A Ntfj Agtjg PressOne P1S-10 100 kN pressing force 120 mm/s feed speed 200 mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 press-in tools Side holder with color-coded boxes TC12 touchscreen control 36-month warranty Immediately available from stock at ATS showroom!

Leto izdelave: 2026, obratovalne ure: 25 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P1S10_32, Electric Press-in Machine P1S-10 from the PRESSONE Series by CoastOne, Finland, with spindle drive. PressOne P1S-10 100 kN pressing force 120 mm/s feed speed Bsdpfsy A Nqqsx Agtelg 200 mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 press-in tools Laser pointer Work light Side holder with color-coded boxes TC12 touchscreen control 36-month warranty

Leto izdelave: 2026, obratovalne ure: 25 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P1S10_31, Electric Press-in Machine P1S-10 from the PRESSONE Series by CoastOne, Finland, with spindle drive. PressOne P1S-10 100 kN pressing force 120 mm/s feed speed 200 mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 press-in tools Laser pointer Work light Bljdpfxsy A Nqdo Agtog Side holder with color-coded boxes TC12 touchscreen control 36-month warranty

Leto izdelave: 2026, obratovalne ure: 25 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P1S10_30, Electric Press-in Machine P1S-10 from the PRESSONE Series by CoastOne, Finland, with spindle drive. PressOne P1S-10 100 kN pressing force 120 mm/s feed speed Bsdey A Nnvspfx Agtjlg 200 mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 press-in tools Laser pointer Work light Side holder with color-coded boxes TC12 touchscreen control 36-month warranty

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 39.000 h, številka stroja/vozila: SO134, Technical Data & Performance Characteristics Bjdpfxjyhbf As Agtolg This Nissei ASB ASB-50MB is a one-step, biaxially oriented stretch blow molding machine engineered for precise PET bottle production. Featuring a compact, rotary indexing platform, it integrates injection molding and stretch blow molding in a single cycle, ensuring exact neck finishes and uniform wall thickness distribution. This pre-owned machine offers reliable performance for beverage manufacturing and industrial packaging projects seeking a proven, cost-efficient solution. Manufacturer: Nissei ASB Engineering Model: ASB-50MB Year of manufacture: 2010 Process: One-step ISBM (Injection-Stretch-Blow Molding) Production speed: approx. 1,000 bottles/hour (bph) with 4 cavities Cavities: Current configuration 4 (supports 1–6 cavities depending on the article) Bottle formats: 40 ml to 750 ml Container type: PET bottles Electrical data (nameplate): Heater 400 V AC, 6.1 kW; Motor 380 V AC 18.5 kW and 200 V AC 0.75 kW; 50 Hz Installed power (approx.): 25.35 kW Advanced Automation & Control Systems The ASB-50MB platform provides stable, repeatable operation with synchronized control of the injection, conditioning, stretching, and blowing stations. Its rotary indexing table ensures precise timing coordination between stations and supports high-quality bottle formation in a compact footprint. Operator interfaces facilitate routine adjustments and process monitoring, while integrated heating controls supply accurate temperature profiles for consistent preform conditioning. Rotary indexing one-step system with coordinated station control Dedicated heating power zone for precise thermal management Structured power supply at 50 Hz for stable operation Designed for rapid tooling and format changes within the compatible size range Integrated safety enclosures and interlocks for secure machine access Production Line Integration This stretch blow molding machine can be seamlessly integrated into a used bottling line or operate as a standalone PET container production unit. Its output can feed conveyors to downstream rinsing, filling, capping, and labeling machines in beverage and other industrial packaging applications. Standalone or inline configuration with downstream filling equipment Compatible with standard conveyor interfaces Format flexibility for 0.04 L to 0.75 L PET bottles Suitable for water, juices, carbonated soft drinks (CSD), and other PET applications in conjunction with suitable downstream systems Machine Condition & Maintenance History This used ASB-50MB is in operational condition. The machine has approximately 39,000 operating hours, corresponding to typical industrial usage, and still retains solid performance potential for new production environments. Operational readiness: operational Operating hours: approx. 39,000

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 33.000 h, številka stroja/vozila: SO135, Technical Data & Performance Specifications This single-stage, biaxially oriented stretch blow molding machine provides uniform PET bottle production with reliable throughput and a compact footprint. Manufactured by ASB INTERNATIONAL PVT. LTD. (Nissei ASB engineering), the ASB-50 MB combines injection molding, conditioning, and blow molding within a single machine, reducing handling steps and improving quality control—ideal for a used bottling line requiring a dependable supply of PET bottles. Manufacturer: ASB INTERNATIONAL PVT. LTD. (Nissei ASB) Model: ASB-50 MB Machine type: Single-stage biaxially oriented stretch blow molding machine Year of manufacture: 2006 Production speed: approx. 1,000 bottles/hour with 4-cavity mold Cavities: Configurable 1–6; supplied in 4-cavity configuration Formats: 40 ml to 750 ml (typical PET bottle sizes in this range) Bedpeyhbfiofx Agtjlg Containers: PET bottles Power supply: 400 V, 50 Hz Installed power (observed): approx. 20.1 kW Motor circuits: 380 V AC — 13.5 kW; 200 V AC — 0.5 kW Heating circuits: 400 V AC — 6.1 kW Advanced Automation & Control Systems The ASB-50 MB platform enables precise regulation of heating and stretch-blow parameters for consistent bottle quality across different formats. Standard single-stage automation synchronizes injection, conditioning, and blowing stations for reproducible results, with integrated interlocks and safety guards for operator protection. The quick-change mold system supports efficient format changes and minimizes downtime during product changeovers, as typical in industrial packaging and beverage production lines. Line Integration Capability Designed for PET bottle production upstream of filling, capping, and labeling machinery, this machine integrates effectively with conveyors, accumulation tables, and downstream filling equipment. The single-stage process eliminates the need for separate preform handling devices (like unscramblers, tippers, and elevators), simplifying line layouts in a used bottling environment. Format flexibility from 40 ml to 750 ml supports applications for water, juices, carbonated soft drinks (CSD), and other beverages, with appropriate molds. Machine Condition & Maintenance History This used machine is offered in ready-to-operate condition and is suitable for immediate integration into an existing beverage production or packaging plant. As with any used stretch blow molding equipment, commissioning checks and routine maintenance are recommended to match installation with local utility conditions and product specifications. Operational Performance & Versatility The ASB-50 MB delivers stable output of approx. 1,000 bph in 4-cavity setup, with the option to reconfigure up to 6 cavities depending on tooling and process parameters. ...

Stanje: generalkompletno obnovljen (rabljeno), Globokovrtalni stroj, 2-vreteni, v prenovi Popolnoma obnovljen, po prenovi kot nov. Bledex E U S Ejpfx Agtjg Tehnični podatki Postopek vrtanja: sistem ELB Število vrtalnih vreten: 2 Minimalni premer vrtanja: 1 mm Maksimalni premer vrtanja: 8 mm Maksimalna globina vrtanja: 300 mm Nazivni premer obdelovancev: 5-30 mm

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7968 TEHNIČNI PODATKI - max. premer diska: 450 mm - premer izvrtine diska: 30 mm - max. dimenzija rezanih blokov dolžina/širina/višina: 150x90 mm - način podajanja materiala: rotacijski/karuselni transporter - število delovnih postaj: 6 kosov (nastavljive na dimenzijo rezane letve) - brezstopenjska regulacija hitrosti podajalnika na frekvenčnem pretvorniku - regulacija dimenzije blokov - avtomat Bledpfjy D I Rxsx Agtog - skupna moč: 6,25 kW - premer odsesovalnega priključka: 120 mm - dimenzije dolžina/širina/višina: 1800x1750x2100 mm - teža približno 500 kg PREDNOSTI – karuselna – zelo dobro stanje – rabljena naprava Cena brez DDV: 14.900 PLN Cena brez DDV: 3.550 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo glede na večje nihanje tečaja)

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: SO126, Used HDPE extrusion blow molding system for 10 L – approx. 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow molding machine designed for the production of HDPE containers up to 10 L. Featuring a single-parison head and robust clamping unit, this EBM unit is ideal for industrial packaging and beverage manufacturing auxiliary facilities (e.g., water cans, edible oils) and can be integrated into a used filling line. Documentation and operating manuals are available. Reference number: SO126. Technical specifications & performance data Key data Manufacturer/model: Uniloy Milacron HSM10/D Year of manufacture: 2000 Technology: Extrusion blow molding (EBM), single parison Material: HDPE Number of cavities: 1 Max. container volume: 10 L Indicative output: up to approx. 300 bph at 10 L (application dependent) Operating manuals: included Reference number: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing output (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; cylinder heating power: 31.4 kW Motor cooling power: 0.58 kW; cylinder cooling power: 1 kW Parison head Type: PE 1/200, single parison Max. die head diameter: 200 mm Head heating power: 14.2 kW Parison wall thickness control: hydraulic (wall thickness programming) Clamping & blowing unit Clamping force: 200 kN Max. mold size: 650 × 500 mm (H) Mold thickness: 2 × 150 mm Mold opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Bljdpfx Asyhbt Hjgtog Electrical Installed power: 156 kW (average consumption approx. 104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Oil tank capacity: 400 l Pump flow rate (1470 rpm): 123 l/min Maximum pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooler motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air demand: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air demand: 1000–1500 Nl/min Cooling water Mold circuit: 8–12 °C; flow rate 15 m³/h Extruder & hydraulic oil cooling: 10–24 °C; flow rate 4 m³/h Dimensions & weights Approx. machine dimensions (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; extrusion group weight: 6400 kg Noise level at operator position: < 85 dB(A) Advanced automation & control systems Hydraulic wall thickness programming for precise parison control, improving weight distribution and top load for 10 L containers. Proprietary Uniloy command and control software (version code available in manuals) with HMI for setpoint management and diagnostics. Integrated temperature control via six extruder zones and heated die head for stable processing at up to 300 °C transformation temperature. Interlocked safety guards and emergency-stop switches for safe operation. Capabilities for integration into the production line

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: SO133, Technical Data & Performance Specifications The SIPA SFR EVO3 is a rotary stretch blow molding machine designed for highly efficient production of PET bottles in modern beverage facilities. As a robust used piece of equipment for industrial packaging, it delivers reliable performance for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and accommodates a broad range of bottle sizes commonly used in the water and soft drink sector. Manufacturer: SIPA Model: SFR EVO3 Year of manufacture: 2017 Production speed: up to 18,000 bottles per hour Number of cavities: 8 Thread/Neck finish: PCO 28-1810 Bottle formats: Compatible with 0.5L, 1.0L, 1.5L formats Container type: Designed for handling PET bottles Bottle diameter (min–max, diagonal): 50–125 mm Bottle height (min–max, without neck): 80–349 mm Advanced Automation & Control Systems Engineered for consistent performance, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing cycles. Operator-friendly HMI and PLC-based controls support recipe management, process monitoring, and rapid format changes. The machine architecture emphasizes repeatability of pre-blow and blow phases, ensuring stable bottle quality even at high production speeds. Bledpeyhbihjfx Agtsg Automated process control with user-oriented HMI Efficient preform heating for uniform material distribution Quick-change features to support fast format changeovers Safety-interlocked protective covers and emergency stop switches for operator protection Integration Capability into Production Lines This blow molder can be seamlessly integrated into used PET filling lines, either as a stand-alone unit ahead of a filler or synchronized within a complete beverage production line. The supplied preform feeder and preform cooling systems facilitate smooth handling and stable production conditions, thus enhancing the overall efficiency of the line. Inline or stand-alone operation with standard conveyor interfaces Compatible with downstream filling, capping, and labeling machinery Flexible handling of 0.5L, 1.0L, and 1.5L formats Suitable for upgrades or capacity expansions of used packaging machines Machine Condition & Maintenance History The machine is currently in operation, demonstrating its readiness for deployment in an active production environment. Built in 2017, it offers a modern platform for operators seeking reliable performance and repeatable quality in PET bottle production. Its status as a fully functional used machine makes it a strong candidate for rapid integration into industrial packaging lines. Operating Performance & Versatility With 8 cavities and up to 18,000 bph, the SFR EVO3 combines speed and quality for demanding beverage...

Stanje: dober (rabljeno), Leto izdelave: 2003, Proizvajalec: MTF Technik Schürfeld GmbH & Co. KG Tip: PZ 255 B Bodpfxsyxwims Agtslg Serijska številka: 11515 Leto izdelave: 2003 Napetost: 230 V Frekvenca: 50 Hz Motor puhala: FD 370 zunanji rotor Moč puhala: 0,37 kW

Stanje: rabljeno, Leto izdelave: 2000, Overview This cold glue labelling machine was manufactured by Krones in 2000. The machine is designed for applying cold glue labels to bottles. It is equipped with three labelling stations (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The system features an integrated Krones Checkmat inspection system for quality control and is configured for 11 bottle formats (0.5 – 1.0 l). Maintenance has been carried out as needed. Technical Data Capacity: up to approx. 15,000 bottles per hour Formats: 0.5 l – 1.0 l, 11 formats Bsdpfoy Azv Sjx Agtolg Application: cold glue labelling of bottles Configuration: 20-head rotary table, 3 labelling stations Label positions: front, back, neck/seal label Equipment: standard Krones control system Including: 3 glue pumps for the cold glue system, inspection system (Krones Checkmat), format parts, documentation

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, W 115| KOSME STROJ ZA PIHANJE PET Model: KSB6R Blsdpfx Aeywy Trjgtog Leto: 2017 Hitrost: 12.000 steklenic na uro Rotacijski s 6 kalupi Kalupi niso vključeni Sistem za rekuperacijo zraka Zaključek vratu: PCO 1881 Največja velikost vsebnika: 3 litre Opremljen s silosom, dvigalom in orientatorjem Varnostne zaščite

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, W 116| SIPA PET PÍHALNIK Model: sfr24 Leto: 2007 Hitrost: 38.000 plastenk/uro za 1,75 l - 41.000 plastenk/uro za 1,5 l, 1,25 l, 1,0 l, 0,7 l Rotacijski 24 votlin 1 komplet orodij priložen Sistem za vračanje zraka Linearni optični pregledni sistem za kontrolo kakovosti preform Podprt tip vratu: PCO 1881 Vključuje hladilni agregat Avtomatski podajalnik preform Bodsywy Tlspfx Agtslg Avtomatski prevračalnik zabojev za preforme Izmetalec plastenk na pnevmatskem transporterju Električna upravljalna plošča v poljščini, angleščini in italijanščini Varnostna zaščita

Stanje: rabljeno, Leto izdelave: 2004, RAZPOLOŽLJIVOST: TAKOJ Bledpfx Agoywy S Ujteg W 117| KRONES pihalnik PET Model: Contiform S18 Leto: 2004 Hitrost: 24.000 steklenic/uro za 2,0 L – 28.000 steklenic/uro za 1,5 L Rotacijski 18 votlin Vključen 1 komplet kalupov Avtomatski hladilnik Avtomatski podajalnik preform Avtomatski prekucnik zabojčkov za preforme Izmetalec steklenic vgrajen v pnevmatski transporter Električna nadzorna plošča v poljščini, angleščini in nemščini Varnostna zaščita