Schulte Vodoravna Vrata nakup rabljenega (1.600)

Stanje: dober (rabljeno), Well-maintained horizontal frame saw. Passage width: 1000 mm. Stroke: 800 mm. Feed rate electronically adjustable. Redpfx Ajunhl Uegtet Clamping carriage approx. 7.5 m long with 5 hydraulic clamps. Can still be inspected in operation.

Stanje: zelo dobro (rabljeno), Prehodna širina 1.000 mm, hod žage 800 mm, žagin motor 22 kW ali 30 kW, zavorni motor za nastavitev debeline reza, moderna avtomatska centralna mazalna naprava, vpenjalni voziček dolžine 6 m s 7 m zobato letevjo, 6 mehanskih vpenjalnih postaj, novi poravnani tiri. Rsdotzlrfjpfx Agtst

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja višina reza: 1.250 mm, Vertikalni tračni žagalni stroj SCHULTE tip VB12 Stroj je popolnoma funkcionalen in delujoč – nova elektroinštalacija in upravljanje. Redpfjyivhnsx Agtjt Komplet vključuje podajalnike, transporterje in upravljavsko kabino – vse je vidno na fotografijah. Maks. višina reza: 1250 mm Maks. debelina obdelovanega hloda: 1450 mm Dolžina hidravličnega vozička: 5700 mm Moč glavnega motorja: 55 kW Natančne mere so prikazane na priloženem načrtu na fotografijah.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Multi-tier Shelving System Like new 2 staircases Year of manufacture: 2016 Modular and compatible Combination of shelving system and steel construction Efficient and economical use of space over 2 levels Two-tier construction Ergonomically optimized picking operations Benefit from multiplying your storage capacity with all the advantages of the SCHULTE boltless system, such as the compatibility of the 25 mm grid pattern perforations and the wide range of accessories. The coordination between the 25 mm grid perforation of the MULTIplus T-profiles and the 25 mm edge height of the shelves enables optimal adaptation to the goods being stored. Manufacturer: Schulte Lagertechnik Shelving system: Boltless system Type: Two-tier shelving unit Number of platform levels: 1 Footprint: 13.18 m x 16.7 m Area per level: 220.11 m² Height of 1st level: 2,180 mm Rodpexanyvofx Agtet Clear height: 2,040 mm Height of 2nd level: 2,250 mm Clear height: 1,950 mm MULTIplus shelving units 25 mm grid perforation Rack height: 2,200 / 2,300 mm Bay width: 1,000 mm Bay depth: 400 / 500 mm Shelf load: 150 / 250 kg Shelf dimensions: 1,000 x 400 mm Finish: galvanized 2 staircases Robust safety railing Powder-coated With hand and knee rail Steps made of grating Maximum platform load: Shelf aisle: 250 kg/m² Main aisle: 250 kg/m² Transfer area: 250 kg/m² Shelf load: 150 kg / 250 kg Bay load: 2,500 kg Max. buckling length: 600 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Additional items – new and used – can be found in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering you a used partition wall manufactured by Schulte for sale. Technical data for the partition wall: Manufacturer: Schulte The partition wall is suitable for shelf depths of 250 mm. Scope of delivery includes: 01x Partition wall, used Material colour: galvanized Total width: approx. 230 mm Weight per piece: approx. 0.361 kg Partition wall height: approx. 150 mm The partition wall is used and may show slight signs of dirt, dents, scratches, or similar blemishes. Our range of services at a glance: (Prices upon request) Installation and assembly Our general installation conditions apply Racking inspection Rodpfxjg Urd Ae Agtot Racking inspection in accordance with DIN EN 15635 carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Leto izdelave: 1981, Klinasti snežni plug, snežni plug, izravnalna deska, čistilna deska, snežna deska, potiskač snega -Proizvajalec: Schulte-Henke, snežni plug tip RKS 200 DFG 4035 A -Dolžina deske: 2000 mm -Višina pluga: 520 mm -z: sistem federnih loput za prevoz ovir Rjdoqxvwyspfx Agtst -Nastavek: mere glej tehnični načrt na fotografiji -Plug: mehansko nastavljiv -Montaža: za viličarja ali podobno -Transportne dimenzije: 2000/800/H660 mm -Teža: 230 kg

Stanje: rabljeno, Horizontal Schulte HB 12 block bandsaw - Roller diameter: 1200 mm - Roller width: 145 mm Rsdjwkpp Aopfx Agtst - Fully hydraulic tensioning carriage - Carriage drive with winch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, širina na sredini: 600 mm, višina središča: 300 mm, moč vretenovega motorja: 3.000 W, hitrost vretena (min.): 200 obr/min, največja hitrost vretena: 2.000 obr/min, poteza s peresom: 300 mm, skupna masa: 800 kg, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Ročni prešač, znamke Schulte Tehnični podatki: Višina konic: 300 mm Razdalja med konicama: 600 mm Dolžina stroja: 1500 mm Vretenasti motor: 3 kW Hitrosti vrtenja: 200 – 2000 1/min (brezstopenjsko nastavljivo) Vpenjanje vretena: M 36 Ročna podpora za nož Pomik konjička: 300 mm (premik pinole + ročni roč) Teža stroja pribl.: 800 kg Rodpfexp Sc Hex Agtet Opis stroja: - Zmogljiv, robusten prešač - Stroj obnovljen in pripravljen za uporabo - Glavno vreteno z novimi ležaji - Nov trifazni motor in pogon z jermenom - Glavno vreteno z brezstopenjsko regulacijo hitrosti - Nova elektrika - Novo lakirano

Leto izdelave: 2019, stanje: rabljeno, General Information The MobyLift is a handy tool designed for the ergonomic lifting, transport, and positioning of products such as doors, tabletops, other panels, and sheets. From an operational perspective, the MobyLift represents a responsible investment. It is simple to operate, reduces the number of damaged products, increases productivity, helps prevent back injuries, and consequently lowers work absences. The MobyLift was developed in cooperation with reputable installation companies, combining their expertise and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile chassis · Electric lifting and tilting system · Automatic vacuum unit · Wireless electric control The MobyLift MC-120-H is designed for quick and easy disassembly into several portable modules once switched off, making it particularly convenient to load and unload or move it to another floor or building. Rjdpfx Agev Dauwetst The MC-120-H comes equipped with a 24 V battery charger for the electric lifting and tilting system and features a charge indicator for continuous battery status monitoring. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, forwards/backwards: 37°, electrically operated - Swivel angle at head joint: 90° on both sides - Rotational angle at head joint: 360° infinite - Lateral shift: 7 cm - Weight: 150 kg, disassemblable by module Location: Nattheim

Stanje: rabljeno, Leto izdelave: 2023, Display Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY GUARDS: MORE WORKING SPACE FLOATING CLAMPS: GUARANTEED PERFECT CUTTING TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Number of standard clamps 5 Number of clamps for versions 33/38/43 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz RPM 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING UNIT Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz RPM 5850 Scoring blade diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power kW 12÷15 Machine voltage Euro voltage (400 V / 50 hz) Compressed air requirement NL/min 300 Required air pressure bar 7 Extraction air flow rate m3/h 2440 Extraction air speed m/sec 20 Extraction nozzle diameter mm 4x120 () Note: For countries where EC directives apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel saw with PC/PLC control, for cutting panels from solid wood, MDF, chipboard, plywood and similar materials. Machine frame and working table - Machine frame constructed from steel tubing - Working table made of ribbed, reinforced steel with bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of - one motor for the main saw blade and one for the scoring blade - Vertical lift of saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure optimum cutting quality - Travel direction against the longitudinal fence - Saw carriage drive by rack and pinion - Carriage guidance on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year warranty), protected by special dust wipers - Pneumatic switch for quick and safe main/blade changingPressure beam - Pressure beam applies even pressure to the workpiece over the entire cut length with cutouts to avoid collisions with the clamps; pneumatic height adjustment on high-precision racks and pinions, pressure adjustable 1.5-6 bar - Dual extraction system with a unit above the pressure beam for cleaning the worktable and one below on the saw carriage – Side automatic aligner with pneumatic cylinder along the entire length. Slide on linear ball bearing guides and shoes. * Travel distance: 1200 mm * Minimum working width: 60 mm * Maximum working width: 1200 mmPositioning pusher and rear part of the machine - Positioning pusher along the entire length driven by robust shaft. Positioning pusher movem... Redpfxex Twcvs Agtst

Stanje: rabljeno, Leto izdelave: 2020, max. workpiece length: 6360 mm Milling spindle: 1 unit Main motor: 13 kW CNC control SCM CNC machining center ACCORD 40 FX for windows and doors ----- INCLUDES comprehensive range of window and door tooling including (window profiles on request!): Wooden windows IV 68, 78, 92 Wooden windows "style windows" Wood-aluminum windows Front doors Lift and slide doors Box-type windows Machine can still be inspected under power! Technical summary (detailed description on request!): ----- - Working area X-Y= 6360x1905, Z =350 Rodpfxjy Hl Iyj Agtot - Automatic table with 8 support beams MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP setting - self-calibration system for the working unit Prisma - Chip deflector on the electrospindle, adjustable - Preparation for angle gearbox "Prisma T-S" - BRC working unit: saw blade for end processing, 1 slot for vertical milling tool 3 vertical, independent drill heads, 32 mm center distance 3 vertical drill heads (not independent), 21.5 mm center distance, for handle bore drilling 4 horizontal drill heads (2 per side, not independent), 21.5 mm center distance 2 horizontal milling heads (1 per side) - TRC 48 - rear tool magazine 48 tool positions (tool holders excluded) Pitch distance between positions 104 mm Maximum tool diameter 350 mm Maximum tool length 320 mm Maximum tool weight 10 kg (15 kg with HSK 63 E spindle) Maximum total weight on the magazine 250 kg - MACH 5 - quick-change system: Enables tool change on the electrospindle in just a few seconds. - Pendulum operation - Automatic axis lubrication - eye-M operating console with integrated PC - Additional fixed operator panel - TECPAD - remote control for machine functions - Clamping jaw preparation H145 for worktable with 8 support beams - Front stop row H110 for worktable with 8 support beams - Rear stop row H110 for worktable with 8 support beams - Vacuum block H110 145x145 mm - Vacuum block H110 145x55 mm, rotatable - Vacuum block H110 180x65 mm, rotatable - First lateral stop row H145 for worktable with 8 support beams - Second lateral stop row H145 for worktable with 8 support beams - Clamp H145 with round base - Clamp H145 with square base - No. 6 lifting devices with double stroke H145 - Laser and reference stop H145 for arch (left) - PRO-SPEED safety system - Maestro CNC – machine operation and programming interface - Maestro pro view – simulation software Tool sale in the condition, scope, and with accessories as available in our warehouse. Note on window profiles, tool drawings, tool system listings: Company Engelfried offers no guarantee that the existing tools match the mentioned and drawn systems. (Technical data according to manufacturer – without guarantee!)

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Tlak: 6 t Hod: 1020 mm Rjdjw Ng D Tspfx Agtet Skupna potrebna moč: 3,5 kW Možno je ravnanje samo med vrhovi

Stanje: zelo dobro (rabljeno), Ugodna sekcijska vrata iz švicarske razgradnje, široka 8 m, visoka 4,2 m, z vgrajenimi vrati. Rsdpfx Aex Tbhcsgtjt

Stanje: rabljeno, Leto izdelave: 2020, Technical details: Cutting diameter: 27 mm Saw band length: 2,910 mm Saw band width: 0.9 mm Throat (span): 320 mm Saw band dimensions: 2,910 x 27 x 0.9 mm Band speed: 20 – 120 m/min Electrical connection: 400/50/60 V / Hz Total connected load: 1.5 kW Approx. machine weight: 390 kg Machine dimensions approx. (L x W x H): 1,480 x 1,700 x 2,000 mm Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vice Rjdoy E Hynepfx Agtet Automatic shut-off after cutting, saw arm returns to starting position Torsionally rigid saw frame made of multiple-ribbed cast steel Hydraulic short-stroke cylinder for vice Precisely ground, adjustable carbide saw blade guides Electric coolant pump Manual blade tensioning with indicator, including electronic blade and cutting pressure monitoring Hydraulic vice (opening and closing) Powered chip removal brush Large, solid, round support table, swivels for miter cuts with preset cutting channel, miter angle set manually, reading via scale Material stop 500 mm with scale Incl. combi-toothing saw blade 4/6

Stanje: novo, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Portes coupe-feu – chaque porte est neuve, jamais installée et de haute qualité, ouverte uniquement pour la prise de photos. 2 portes coupe-feu de la marque Teckentrup Door Solutions (distribution KAMO Kran und Toranlagen). Portes de sécurité, portes en acier, fabricant Teckentrup modèle T30 FSA 62 (portes intérieures) à un vantail. DIN à droite, 1000 x 2000 mm, apprêtée RAL 9002 blanc gris et en acier galvanisé 1 mm. Les portes n'ont jamais été installées. Bâti d'encadrement (1 pièce) pour maçonnerie, 265 mm, avec rail de guidage GEZE. Rsdpfohf I Ewox Agtot 1 ferme-porte en applique, contact magnétique et contact de verrouillage pour la surveillance de l'état, serrure avec fonction panique, garniture de poignée, dont 1 avec ouvre-porte électrique intégré. Coupe-feu. Épaisseur du vantail : 62 mm. À vendre non installées et en état neuf. Belle opportunité pour une protection incendie optimale des espaces intérieurs. Prix sur demande Toutes les informations techniques sont données sous réserve d’erreurs ou fautes de frappe. Vente uniquement dans les pays de l'Union européenne.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: rabljeno, Tehnične podrobnosti: Premer reza: 260 mm Dolžina tračne žage: 4310 mm Širina tračne žage: 27 mm Območje reza pri 90 stopinjah: okroglo: 260 mm Območje reza pri 90 stopinjah: kvadrat: 260 x 260 mm Hitrost traku: 17 - 110 m/min Električni priključek: 400/50 V / Hz Skupna potrebna moč: 3,5 kW Teža stroja cca: 1000 kg Dimenzije stroja cca D x Š x V: 2,3 x 1,0 x 1,4 m Dimenzije D x Š x V: 3,0 x 0,4 x 0,8 m Rjdpfxsy Dc N Aj Agtot

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of construction: 2006 Wiring diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Auxiliary voltage: 24 V Auxiliary frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require further information, please send us a message or contact us by phone. CNC machining centre for the processing of wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). 2 four-axis working heads for simultaneous machining (20kW each). Automatic loading and unloading tables. Optionally, a comprehensive tooling package is available (tool holders, angle aggregates, profiling heads). The machine is currently in continuous operation. The machine was purchased in 2024 after a complete overhaul. Since then it has been running for 15 months on a single shift. Technical data: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The maximum working length can be achieved by multiple re-clamping of the element. Milling spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0–18,000 rpm Rotation directions: Right / Left C-axis: Yes Feed rates: - Z-axis: 60 m/min - Y-axis: 120 m/min - C-axis: 450°/s Hand tool changer for milling spindle no. 1: - Type: disc - Capacity: 18 tools - Tool holder spacing: 100 mm - Maximum single tool weight: 10 kg - Maximum total tool weight: 130 kg - Tool holder type: HSK F 63 Milling spindle no. 2: Motor power S1: 20 kW Motor speed range: 0–18,000 rpm Rotation directions: Right / Left C-axis: Yes Feed rates: - Z-axis: 60 m/min - Y-axis: 120 m/min - C-axis: 450°/s Hand tool changer for milling spindle no. 2: - Type: disc - Capacity: 18 tools - Tool holder spacing: 100 mm - Maximum single tool weight: 10 kg - Maximum total tool weight: 130 kg - Tool holder type: HSK F 63 External tool magazine: - Type: linear - Capacity: 120 tools Rodpfx Asyu Sn Uogtst - Tool holder spacing: 80 mm - Tool holder type: HSK F 63 Loading table: automatic cross-feed Unloading table: automatic cross-feed CNC control: PLC control: Siemens S7 Mobile control panel. Controller: - Operating system: Microsoft Windows - Modem for data transfer and diagnostics - Touchscreen Siemens Sinumerik 840 D Number of axes: 4 Machine is fully operational and currently in continuous production. At extra cost, the following equipment packages are available: 8 angle aggregates, 3 standard toolholder packages, 17 new spindle packages for heads.

Stanje: rabljeno, Leto izdelave: 2020, max. workpiece length 3740 mm milling spindle 1 unit main motor 15 kW CNC control system Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of customer ----- - From a wood window production facility. - Machine is still connected and ready for demonstration - Without machining tools Technical Description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Axis travel paths: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm Rjdpfx Agoyq Sztotot - Additional locking mechanism for the C-axis - Boring head DH 18 6H1S: vertical boring unit with 12 spindles (7 spindles in X-direction, 5 spindles in Y-direction, slot saw in X-direction) Horizontal boring unit with 6 spindles, 4 in X-direction and 2 in Y-direction. 1 slot saw in X-direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right side of the machine stand max. tool diameter 240 mm max. tool height 370 mm - Tool change position for circular saw blade mounted on the gantry/tool changer, max. saw blade diameter 350 mm - Tool changer on the left in the machine stand with 10 tool positions. max. tool diameter 180 mm max. tool length 230/300 mm collet distance 110 mm - Disc tool changer with 24 tool positions mounted on the gantry, traveling in X-direction max. tool diameter 240 mm max. tool height 370 mm - Mobile pick-up station for chip deflector - 6 workpiece supports, s-motion, position-controlled - 2 machining zones for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved arch processing - Including all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - Software "WoodFlash" Lamello Clamex P Macro Notching Macro - "Greenline Package" for reduced energy consumption ----- Price for the above-mentioned machine on request! ----- Optional new Oppold tool set for H500: Windows Timber windows IV 68, 78 and 88 inward-opening, with changeable rebate on the side and top. Glazing rebate 20mm, frame and sash shoulder 20° bevel with loose and pre-milled glazing bead Old building timber windows IV 68, 78 and 88 inward-opening, without rain bar, with changeable rebate on side, top and bottom. Glazing rebate 20mm, frame and sash shoulder 15° bevel with hung weather bar Timber-aluminium windows (system provider: Gutmann Mira, slanted rebate system) HA IV 68, 78 and 88, inward-opening, 2 sash variants: square and slanted, changeable rebate bottom, side & top Entrance doors Timber HTIV 68, 78 and 88 with single rebate in the frame and double rebate in the sash, inward-opening, 1 sash variant, glazing rebate, without changeable rebate offset construction Timber-aluminium IV 68, 78 and 88 with single rebate in the frame and double rebate in the sash Lift-slide doors Timber-HS IV 68, 78 and 88, without frame production Timber-aluminium-HS IV 68, 78 and 88, without frame production Execution...

Stanje: rabljeno, Leto izdelave: 2009, Dolžina reza: 4200 mm Širina reza: 3200 mm Največji izstop žaginega lista: pri žagin listu navpično 0° = 70 mm, pri žagin listu nagnjenem na 45° = 50 mm Hitrost podajanja naprej: 0-80 m/min. Hitrost podajanja nazaj: 100 m/min. Teža: pribl. 5400 kg. Moč motorja: 14 kW Predrezilo: 1,5 kW Orodje: premer: 350 mm, izvrtina: 30 mm Priklop za odsesavanje spodaj: 140 mm Priklop za odsesavanje pri pritiskalni letvi: 100 mm Rsdpfx Agjyf Nu Totjt Lokacija skladišča: Dobavitelj

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump Rjdpfx Agjhpktvstet - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Cutting diameter, round: 230 mm Cutting diameter, square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Band speed: 15 - 100 m/min Total connected load: 2.2 kW Machine weight: approx. 1.2 t SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, alloyed steel, solid and profile materials, with a maximum remnant length of 60 mm. - Maximum cutting cross-section: 230 x 230 mm. Rsdpfx Agofg E Hyetet - Numerically controlled bandsaw with a new Windows “CE” based IGE system, specially developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters. - Safety enclosure in compliance with the latest Machinery Directive EN 13898/2007 safety standards. - New fieldbus communication system with dual microprocessor and serial interface. - Robust cast iron construction (G25) to compensate for vibrations, increase machine stability, and extend the service life of the saw blade.

Stanje: novo, Premer reza 185 mm Dolžina tračnega lista 2.085 x 20 x 0,90 mm Redohpktropfx Agtot Višina mize 915 mm Hitrost traku 35/70 m/min Območje reza pri 90 stopinjah: okroglo 185 mm Območje reza pri 90 stopinjah: kvadratno 150 mm Območje reza pri 90 stopinjah: ploščato 220 x 150 mm Priključna napetost 400 V Skupna potrebna moč 0,8 kW Teža stroja pribl. 195 kg Potrebni prostor pribl. 550 x 1.280 x 1.740 mm Kovinska tračna žaga z brezstopenjsko elektronsko regulacijo hitrosti in avtomatskim spuščanjem. •Izbirno stikalo za hidravlično vodeno ali ročno spuščanje žagine roke •Zagodna roka vrtljiva do 60° desno •Hitrovpenjalni primež •Vodenje traku z 8 krogličnimi ležaji •Hidravlično napenjanje žaginega traku z indikatorjem napetosti in izklopom ob pretrganju traku •Vključno z napravo za hlajenje •Vključno z omarico za stroj

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Rodpfx Agefg E H Eetot Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Cutting diameter 250 mm Saw blade length 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed 36/72 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t MEP Sawing Machine: Saw frame, vise unit, and base made of high-strength cast iron Precision angle scale on the cast iron structure Electrical system (with fully identifiable wiring and Rodpfxjfg E H Io Agtot 24 V low voltage system) Switch handle IP 55 for manual cycles (if applicable) Rotating chip removal brush for the saw band Vise unit with quick approach Precise stops with setting for miter cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, user manuals, and spare parts order instructions in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual mode and cutting with automatic head feed by gravity. CCS (Cut Control System) with (A: selector switch for manual and automatic cutting – B: adjustment of the cutting speed – C: hydraulic brake with reservoir – D: end stop for stopping the band); also available as an option for already produced machines. Quick-adjust vise Hydraulic indicator for band tension Electric coolant pump for cooling and lubricating the saw band and easily accessible coolant tray above the base frame On versions with pneumatic vise (MA), opening and closing of the vise are controlled by a manual valve (optionally foot-operated).